I'm trying to get the terminal size using ANSI escape codes.
I found some help in How do I determine size of ANSI terminal?
but I cannot understand how to get the response from DSR6 to get the row / column of the bottom right corner.
I need this because I'm trying to align some text in the middle of the terminal.
I don't have a solution using ansi escape codes, but this solution here gives you the terminal size in both Windows and Linux: https://stackoverflow.com/a/62485211/9178992
Related
I'm trying to make a xy program which prints ASCII art in the console with chracters such as ⣿, when running the program just prints question marks (?). I understand that its either because of me using the wrong encoding or Microsoft Visual Studio not having the dictionary of these ASCII Characters.
If you have any idea on how to either change encoding or fixing the isue ,it would be much appreciated
Possible solutions:
Try to change the source file encoding to UTF-8 without signature
or UTF-8 with signature.
Try to use wchar_t literal, i.e. std::wcout << L"Your String";.
Learn more:
how to change source file encoding in csharp project (visual studio / msbuild machine)? (Also applies to C++)
What does the 'L' in front a string mean in C++?
There is not a problem with your code but rather a problem with the console that shows your output. It does not show unicode character correctly. In order for it to show these characters correctly it need to recognize unicode and use a font that actually have those characters. To verify this, simple open a cmd window and copy/paste the character into it and see what heppens.
Hello I was just wondering how I can display the infinity (∞) in C++? I am using CodeBlocks. I read couple of Q&A's on this topic but I'm a newbie at this stuff, especially with Hex coding and stuff. What do I have to include and what do I type out exactly. If someone can write the code and explain it, that'd be great! Thanks!
The symbol is not part of the ASCII code. However, in the code page 437 (most of the time the default in Windows Command Prompt with English locales/US regional settings) it is represented as the character #236. So in principle
std::cout << static_cast<unsigned char>(236);
should display it, but the result depends on the current locale/encoding. On my Mac (OS X) it is not displayed properly.
The best way to go about it is to use the UNICODE set of characters (which standardized a large amount of characters/symbols). In this case,
std::cout << "\u221E";
should do the job, as the UNICODE character #221 represents inf.
However, to be able to display UNICODE, your output device should support UTF encoding. On my Mac, the Terminal uses UTF, however Windows Command Prompt still uses the old ASCII encoding CodePage 437 (thanks to #chris for pointing this out). According to this answer, you can change to UNICODE by typing
chcp 65001
in a Command Prompt.
You can show it through its UNICODE
∞ has the value: \u221E
You can show any character from the Character Map by its unicode.
The character I'm first looking for is usually 201 in normal ascii code, but its different for mac. How do i work around this?
It's possible to input the Unicode characters on a Mac by switching to the Unicode Hex Input keyboard layout.
Open system preferences
Choose keyboard
Add Unicode Hex Input to the list
Select "Show Input menu in menu bar"
Close the preferences
Click on the flag that's appeared in the menu bar
Select Unicode Hex Input
Then you need the codes and you can find a nice summary of the box codes here at Wikipedia.
To enter a code:
Hold down Option (alt)
Type the code, without the preceding U, i.e for U+2560, type 2560
Release Option
I drew this example using that method: ╠╩╬╩╣
After you're finished, you can change your keyboard input back to your normal one using the flag in the menu bar.
This character in not available in any single byte character set on OS X.
Unlike the Windows environment (which require special coding to use Unicode), Unicode is readily available in OS X.
Use Unicode U+2554 or UTF-8 E2 95 94
You can just use the following in a character or string ╔
There is no such thing as ASCII character 201. ASCII is a 7-bit single byte character encoding, where code points go from 0 to 127, inclusive. Maybe you are referring to “╔” in the original IBM PC character set?
Then you can do this:
Use a Windows PC with a keyboard that has a numeric keypad.
In a console window with input (e.g. the command interpreter), hold down Alt and type 201 on the numeric keypad, in number mode (NumLock on).
Start Word or Windows’ WordPad.
Copy and paste the character into Word or WordPad.
Type Alt+X.
On my laptop WordPad reports 2554, which means it's Unicode character U+2554 (hexadecimal).
In C++ you can express that character as L'\u2554', which is of type wchar_t.
On the other hand, if you prefer names to numbers, ncurses has supported double- and thick-line drawing characters in Unicode terminals since late 2009. That is after the (rather old) ncurses 5.7 bundled with OSX, but newer releases are available with MacPorts, etc.
Here are a couple of screenshots to illustrate:
I want to create a C++ console application that print some text to different parts of the console. For example in QBasic you can use:
locate(8,5)
print "hi"
And hi would be printed in column 8 line 5. In C++ when I use cout it always prints on the next line, and begins printing in the first column.
Is there any way I can do this?
C++ itself does not have this feature, it's I/O model is a fairly simple, sequential one.
If you want to do fancy cursor positioning, you'll need to output (for example) control characters which your terminal will recognise as special commands (such as ANSI or VT escape sequences), or use a library like curses (see ncurses here) which can do a lot of the grunt work for you, not just cursor positioning but also things like text mode windows and so forth.
A library, like ncurses can help you do this.
Using the following code to create a Unicode string:
wchar_t HELLO[20];
wsprintf(HELLO, TEXT("%c"), 0x2074);
When I display this onto a Win32 Control like a Text box or a button it gets mapped to a [] Square.
How do I fix this ?
I tried compiling with both Eclipse(MinGW) and Microsoft Visual C++ (2010).
Also, UNICODE is defined at the top
Edit:
I think it might be something to do with my system, because when I visit: http://en.wikipedia.org/wiki/Unicode_subscripts_and_superscripts
some of the unicode characters don't appear.
The font you are using does not contain a glyph for that character. You will likely need to install some new fonts to overcome this deficiency.
The character you have picked out is 'SAMARITAN MODIFIER LETTER EPENTHETIC YUT' (U+081A). Perhaps you were after U+2074, i.e. 'SUPERSCRIPT FOUR' (U+2074). You need hex for that: 0x2074.
Note you changed the question to read 0x2074 but the original version read 2074. Either way, if you see a box that indicates your font is missing that glyph.
The characters you are getting from Wikipedia are expressed in hexadecimal, so your code should be:
wchar_t HELLO[20];
wsprintf(HELLO, TEXT("%c"), (wchar_t)0x2074); // or TEXT('\x2074')
If it still doesn't work, it's a font problem; if you need a pan-Unicode font, it seems that Code2000 is one of the most complete out there.
Funny fact: the character that has the decimal code 2074 (i.e. hex 81a) seems to actually be a box (or it's such a strange beast that even the image outline at FileFormat.Info is wrong). :)
For the curious ones: it turns out that 0x081a is this thing: