When I run docker-compose up in my Docker project it fails with the following message:
Error starting userland proxy: listen tcp 0.0.0.0:3000: bind: address already in use
netstat -pna | grep 3000
shows this:
tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN -
I've already tried docker-compose down, but it doesn't help.
In your case it was some other process that was using the port and as indicated in the comments, sudo netstat -pna | grep 3000 helped you in solving the problem.
While in other cases (I myself encountered it many times) it mostly is the same container running at some other instance. In that case docker ps was very helpful as often I left the same containers running in other directories and then tried running again at other places, where same container names were used.
How docker ps helped me:
docker rm -f $(docker ps -aq) is a short command which I use to remove all containers.
Edit: Added how docker ps helped me.
This helped me:
docker-compose down # Stop container on current dir if there is a docker-compose.yml
docker rm -fv $(docker ps -aq) # Remove all containers
sudo lsof -i -P -n | grep <port number> # List who's using the port
and then:
kill -9 <process id> (macOS) or sudo kill <process id> (Linux).
Source: comment by user Rub21.
I had the same problem. I fixed this by stopping the Apache2 service on my host.
You can kill the process listening on that port easily with one command below :
kill -9 $(lsof -t -i tcp:<port#>)
ex :
kill -9 $(lsof -t -i tcp:<port#>)
or for ubuntu:
sudo kill -9 `sudo lsof -t -i:8000`
Man page for lsof : https://man7.org/linux/man-pages/man8/lsof.8.html
-9 is for hard kill without checking any deps.
(Not related, but might be useful if its PORT 5000 mystery) - the culprit process is due to Mac OS monterery.
The port 5000 is commonly used to serve local development servers. When updating to the latest macOS operating system, I was unable the docker to bind to port 5000, because it was already in use. (You may find a message along the lines of Port 5000 already in use.)
By running lsof -i :5000, I found out the process using the port was named ControlCenter, which is a native macOS application. If this is happening to you, even if you use brute force (and kill) the application, it will restart itself. In my laptop, lsof -i :5000 returns that Control Center is being used by process id 433. I could do killall -p 433, but macOS keeps restarting the process.
The process running on this port turns out to be an AirPlay server. You can deactivate it in
System Preferences › Sharing, and unchecking AirPlay Receiver to release port 5000.
I had same problem,
docker-compose down --rmi all (in the same directory where you run docker-compose up)
helps
UPD: CAUTION - this will also delete the local docker images you've pulled (from comment)
For Linux/Unix:
Simple search for linux utility using following command
netstat -nlp | grep 8888
It'll show processing running at this port, then kill that process using PID (look for a PID in row) of that process.
kill PID
In some cases it is critical to perform a more in-depth debugging to the problem before stopping a container or killing a process.
Consider following the checklist below:
1) Check you current docker compose environment
Run docker-compose ps. If port is in use by another container, stop it with docker-compose stop <service-name-in-compose-file> or remove it by replacing stop with rm.
2) Check the containers running outside your current workspace
Run docker ps to see list of all containers running under your host.
If you find the port is in use by another container, you can stop it with docker stop <container-id>.
(*) Because you're not under the scope of the origin compose environment - it is a good practice first to use docker inspect to gather more information about the container that you're about to stop.
3) Check if port is used by other processes running on the host
For example if the port is 6379 run:
$ sudo netstat -ltnp | grep ':6379'
tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 915/redis-server 12
tcp6 0 0 ::1:6379 :::* LISTEN 915/redis-server 12
(*) You can also use the lsof command which is mainly used to retrieve information about files that are opened by various processes (I suggest running netstat before that).
So, In case of the output above the PID is 915. Now you can run:
$ ps j 915
PPID PID PGID SID TTY TPGID STAT UID TIME COMMAND
1 915 915 915 ? -1 Ssl 123 0:11 /usr/bin/redis-server 127.0.0.1:6379
And see the ID of the parent process (PPID) and the execution command.
You can also run: $ pstree -s <PID> to a visual display of the process and its related processes.
In our case we can see that the process probably is a daemon (PPID is 1) - In that case consider running: A) $ cat /proc/<PID>/status in order to get a more in-depth information about the process like the number of threads spawned by the process, its capabilities, etc'.
B) $ systemctl status <PID> in order to see the systemd unit that caused the creation of a specific process. If the service is not critical - you can stop and disable the service.
4) Restart Docker service
Run: sudo service docker restart.
5) You reached this point and..
Only if its not placing your system at risk - consider restarting the server.
In my case it was
Error starting userland proxy: listen tcp 0.0.0.0:9000: bind: address already in use
And all that I need is turn off debug listening in php storm
Most probably this is because you are already running a web server on your host OS, so it conflicts with the web server that Docker is attempting to start.
So try this one-liner before trying anything else:
sudo service apache2 stop; sudo service nginx stop; sudo nginx -s stop;
I had apache running on my ubuntu machine. I used this command to kill it!
sudo /etc/init.d/apache2 stop
I was getting the below error when i was trying to launch a new container -
listen tcp 0.0.0.0:8080: bind: address already in use.
To check which process is running on port 8080, run below command:
netstat -tulnp | grep 8080
i got the output below
[root#ip-112-x6x-2x-xxx.xxxxx.compute.internal (aws_main) ~]# netstat -tulnp | grep 8080 tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN **12749**/java [root#ip-112-x6x-2x-xxx.xxxxx.compute.internal (aws_main) ~]#
run
kill -9 12749
Then try to relaunch the container it should work
If redis server is started as a service, it will restart itself when you using kill -9 <process_id> or sudo kill -9 `sudo lsof -t -i:<port_number>` . In that case you will need to stop the redis service using following command.
sudo service redis-server stop
I upgraded my docker this afternoon and ran into the same problem. I tried restarting docker but no luck.
Finally, I had to restart my computer and it worked. Definitely a bug.
Check docker-compose.yml, it might be the case that the port is specified twice.
version: '3'
services:
registry:
image: mysql:5.7
ports:
- "3306:3306" <--- remove either this line or next
- "127.0.0.1:3306:3306"
Changing network_mode: "bridge" to "host" did it for me.
This with
version: '2.2'
services:
bind:
image: sameersbn/bind:latest
dns: 127.0.0.1
ports:
- 172.17.42.1:53:53/udp
- 172.17.42.1:10000:10000
volumes:
- "/srv/docker/bind:/data"
environment:
- 'ROOT_PASSWORD=secret'
network_mode: "host"
I ran into the same issue several times. Restarting docker seems to do the trick
A variation of #DmitrySandalov's answer: I had tomcat/java running on 8080, which needed to keep going. Looked at the docker-compose.yml file and altered the entry for 8080 to another of my choosing.
nginx:
build: nginx
ports:
#- '8080:80' <-- original entry
- '8880:80'
- '8443:443'
Worked perfectly. (The only wrinkle is the change will be wiped if I ever update the project, since it's coming from an external repo.)
At first, make sure which service you are running in your specific port. In your case, you are already using port number 3000.
netstat -aof | findstr :3000
now stop that process which is running on specific port
lsof -i tcp:3000
I resolve the issue by restarting Docker.
It makes more sense to change the port of the docker update instead of shutting down other services that use port 80.
Just a side note if you have the same issue and is with Windows:
In my case the process in my way is just grafana-server.exe. Because I first downloaded the binary version and double click the executable, and it now starts as a service by user SYSTEM which I cannot taskkill (no permission)
I have to go to "Service manager" of Windows and search for service "Grafana", and stop it. After that port 3000 is no longer occupied.
Hope that helps.
The one that was using the port 8888 was Jupiter and I had to change the configuration file of Jupiter notebook to run on another port.
to list who is using that specific port.
sudo lsof -i -P -n | grep 9
You can specify the port you want Jupyter to run uncommenting/editing the following line in ~/.jupyter/jupyter_notebook_config.py:
c.NotebookApp.port = 9999
In case you don't have a jupyter_notebook_config.py try running jupyter notebook --generate-config. See this for further details on Jupyter configuration.
Before it was running on :docker run -d --name oracle -p 1521:1521 -p 5500:5500 qa/oracle
I just changed the port to docker run -d --name oracle -p 1522:1522 -p 5500:5500 qa/oracle
it worked fine for me !
On my machine a PID was not being shown from this command netstat -tulpn for the in-use port (8080), so i could not kill it, killing the containers and restarting the computer did not work. So service docker restart command restarted docker for me (ubuntu) and the port was no longer in use and i am a happy chap and off to lunch.
maybe it is too rude, but works for me. restart docker service itself
sudo service docker restart
hope it works for you also!
I have run the container with another port, like... 8082 :-)
I came across this problem. My simple solution is to remove the mongodb from the system
Commands to remove mongodb in Ubuntu:
sudo apt-get purge mongodb mongodb-clients mongodb-server mongodb-dev
sudo apt-get purge mongodb-10gen
sudo apt-get autoremove
Let me add one more case, because I had the same error and none of the solutions listed so far works:
serv1:
...
networks:
privnet:
ipv4_address: 10.10.100.2
...
serv2:
...
# no IP assignment, no dependencies
networks:
privnet:
ipam:
driver: default
config:
- subnet: 10.10.100.0/24
depending on the init order, serv2 may get assigned the IP 10.10.100.2 before serv1 is started, so I just assign IPs manually for all containers to avoid the error. Maybe there are other more elegant ways.
I have the same problem and by stopping docker container it was resolved.
sudo docker container stop <container-name>
i solved with this sudo service redis-server stop
When trying to connect to tensorboard logs on a remote server and entering the address http://localhost:16006/ in chrome and firefox I get this message in the command line "channel 3: open failed: connect failed: Connection refused" multiple times and this message on the browser, "The Connection was Reset".
I ssh into the server like this: ssh -L 16006:127.0.0.1:6006 username#machine and then go one level up the log folder and write: tensorboard --logdir logs --port 16006
I tired:
tensorboard --logdir logs --port 16006 --bind-all
and also
tensorboard --logdir logs --host localhost, also
tensorboard --logdir logs --host 127.0.0.1
None of the above has wroked. I tried running the line above from another environment which didn't help. I went to the office and tried connecting to the logs from the server machine directly and it worked.
It used to work before when accessing remotely. Do you know what the problem is? any hint would be immensely appreciated.
I am having the same problem, but I think you should designate --port 6006 since it looks like you are forwarding remote port 6006 to the local port 16006.
Even so, since 6006 is the default port, the other commands should have worked, but you would have to go to http://127.0.0.1:16006 on your local machine, rather than the link it provides.
Some more in depth explanations can be found here how to run tensorboard on a remote server and how to see tensorboard over ssh
Even following this advice though I am still getting a 'channel 3: open failed: connect failed: Connection failed' error
I have a web application running on Laravel5.2 framework, with session driver set to redis with following AWS setup.
Instance-1: Running web application, with Redis configurations in .env file as follow
Redis-host: aws-private-ip-of-instance-2
Redis-password: NULL
Redis-port: 6379
Instance-2: Redis-server running with following configuration
Bind aws-private-ip-of-instance-2 and 127.0.0.1
Working directory /var/lib/redis with 775 permission, and ower-group is redis.
RDB snapshot name dump.rdb with 660 permission, and ower-group is redis.
NOTE: In AWS inbound rule for port 6379 is configured for
Instance-2.
Everything works fine, until redis tries to write the data on the RDB file. Following error shows on front-end.
MISCONF Redis is configured to save RDB snapshots, but is currently
not able to persist on disk. Commands that may modify the data set are
disabled. Please check Redis logs for details about the error.
While in the logs of Redis server i got following data.
4873:M 23 Sep 10:08:15.028 * 1 changes in 900 seconds. Saving...
4873:M 23 Sep 10:08:15.028 * Background saving started by pid 7392
7392:C 23 Sep 10:08:15.028 # Failed opening .rdb for saving: Read-only file system
4873:M 23 Sep 10:08:15.128 # Background saving error
Things I have tried
Add vm.overcommit_memory = 1 to /etc/sysctl.conf, as suggested in Redis-administraition-blog
Change path to dump.rdb file to tmp folder and change permissions to 777.
This other Stack Exchange thread might help, since you are using a custom /tmp dir for data:
The simple way to do this is to run systemctl edit redis. This will create an override drop-in file /etc/systemd/system/redis.service.d/override.conf, in which you can place your changes (and the proper section):
[Service]
ReadWriteDirectories=-/my/custom/data/dir
You may also create that directory and place files ending in .conf in it manually. But do not leave the directory empty, as this will disable the service.
In either case, run systemctl daemon-reload and you are ready to restart your service.
Many threads also point to filesystem inconsistency as root cause. Since you are using EC2, check this AWS forums post:
To fix this, you will have to:
Stop the instance
Detach the root volume of your instance
Attach the volume as a data volume to any running Linux instance in the same availability zone
Perform a filesystem check (fsck) on the volume and fix the issues
Detach the volume and attach it back to your instance as it's root volume
Boot back instance and verify if the volume was able to mount successfully
As a last resort, terminate the instance if possible.
Hope it helps!
Well this is very embarrassing to post answer of own question, which was a really stupid mistake. But hope new folks here learns from my mistake too.
So first thing I have done is enable detail logs for redis-server in /etc/redis/redis.conf file by changing log_level option to debug.
Observe the logs and understand that my redis port 6379 was open for everyone on internet.
So from logs I observe that someone else's server is spoofing into my redis server and making it slave of it. And as my redis server is configure in a way that slave is read-only, when i try to access my redis-server it throw error of read-only.
After applying the fire-wall for redis server port, I have not encounter this issue anymore.
I'm new to docker and haproxy.. I tried to follow the example from the official docker hub repo.
So, I have Dockerfile
FROM haproxy:1.5
COPY haproxy.cfg /usr/local/etc/haproxy/haproxy.cfg
and simple haproxy config (which I expect to redirect local calls to my EB instance)
global
# daemon
maxconn 256
defaults
mode http
timeout connect 5000ms
timeout client 50000ms
timeout server 50000ms
frontend http-in
bind *:80
default_backend servers
backend servers
server server1 {my-app}.elasticbeanstalk.com:80 maxconn 32
Build and run
$ docker build .
$ docker run --rm d4598bcc293f
Container starts and stucks, Ctrl+C doen't stop it. "docker kill" helps only.
My EB resource is up and running
$ curl {my-app}.elasticbeanstalk.com/status
{
"status": "OK"
}
But local calls fail
$ boot2docker ip
192.168.59.104
$ curl 192.168.59.104/status
curl: (7) Failed to connect to 192.168.59.104 port 80: Connection refused
What am I missing or doing wrong?
Thank you!
UPDATE: I've found the problem with calls redirections. Wrong port
number in haproxy.cfg.
But this problem still annoys me... Container starts and stucks,
Ctrl+C doen't stop it. "docker kill" helps only.
If you want to be able to exit with control-c, do docker run -i <image>. The -i means to pass input to the containerized program, and if HAProxy gets a control-c then it will terminate which will stop the container.
HAProxy doesn't produce any output unless you run it in debug mode, so there's not really much point to running attached, though. You might have a better time with docker run -d <image>, which will detach from the container and let it run in the background. To stop it, use docker kill.