I'm using Oh My Zsh, and was wondering if there is a way to create a function or alias to run multiple commands. Just as an example, running an 'update' command will update specific gems, but not all of them.
As you've discovered, you can chain commands in a single alias using ;:
alias update_my_gems="echo foo; echo bar"
Alternatively, you can write a function very easily in your ~/.zshrc file:
update_my_gems() {
echo foo
echo bar
}
For readability, I'd personally go for a function for anything that's semi-complex.
If there are many commands, I find it useful to alias the execution of a .sh file located on my home directory
alias start_containers="./start-containers.sh"
To throw the alias inside the config file, you can do
echo alias start_containers="./start-containers.sh" >> ~/.zshrc
Related
I have a build where it would be easiest for now to just have unique build rules for each build target (eg object file and library). Is it possible to specify in the build.ninja-file what to do without first specifying a rule for it.
For example (toy syntax)
build this_file: depends_on_this.o depends_on_that.o - gcc argumentss_to_use files.o etc
As usual I found out a way to do this a minute after asking.
We could just forward the whole command as a variable
rule run
command = $cmd
build log.txt: run
cmd = echo $hello >> log.txt
Right now, I'm trying to build a tool from source and use it to build a C++ project. I'm able to extract the tar file (gcc-arm-none-eabi). But, when I try to add it to path (using $GITHUB_PATH, not add-path), the path doesn't apply on my next action and I can't build the file. The error states that it can't find the gcc-arm-none-eabi toolset, which means that it didn't go to path.
Here's the script for the entrypoint of the first function (make is ran in the next action to allow for path to apply)
echo "Downloading ARM Toolchain"
# The one from apt isn't updated so I have to build from source
curl -L https://developer.arm.com/-/media/Files/downloads/gnu-rm/10-2020q4/gcc-arm-none-eabi-10-2020-q4-major-x86_64-linux.tar.bz2 -o gcc-arm-none-eabi.tar.bz2
tar -xjf gcc-arm-none-eabi.tar.bz2
echo "/github/workspace/gcc-arm-none-eabi-10-2020-q4-major/bin" >> $GITHUB_PATH
I can't even debug by seeing what's in the path because running echo $(PATH) just says that PATH cannot be found. What should I do?
I can't even debug by seeing what's in the path because running echo $(PATH) just says that PATH cannot be found. What should I do?
First, PATH is not a command so if you want to print its value, it would be something like echo "${PATH}" or echo "$PATH"
Then, if you want to add a value to an existing environment variable, it would be something like
export PATH="${PATH}:/github/workspace/gcc-arm-none-eabi-10-2020-q4-major/bin"
EDIT: seems not a valid way to add something to the path using Github Actions, meanwhile it seems correct in the question. To get more details: https://docs.github.com/en/free-pro-team#latest/actions/reference/workflow-commands-for-github-actions#adding-a-system-path . Thanks to Benjamin W. for pointing this out in the comments.
Finally I think it would be a better fit if you use a docker image that already contains that kind of dependancies (you could easily write your own Dockerfile if this image doesn't already exists). Github action is designed to use docker (or OCI containers) image that contains the dependancies you need to perform your build actions. You should take a look here: https://docs.github.com/en/free-pro-team#latest/actions/creating-actions/dockerfile-support-for-github-actions
I am working with a bunch of txt files(thousands) on my project. Each txt file has 'csv' information on it. The problem is that each txt file has a random name and I cannot create a code for loading them in my project due to it. So, I want to rename them in a particular pattern to make easier the loading of the files in my work. I will use C++ for accomplish this task.
I put all the txt files in a folder but I cannot see a way of renaming them using C++. How can I do this? is there a way to do it? Can someone help me?
You can use std::filesystem::directory_iterator and std::filesystem::rename (c++17), as documented here.
Disclaimer
This answer validity is based on a comment where the author precised they were not bound to the C++ language (it may be worth editing the question, the C++ tag, and the OS). This solution may work for UNIX systems supporting bash, that is most Linux distributions and all releases of Apple's macOS prior to macOS Catalina (correct me if I'm wrong).
Bash command line
Using the following bash command should rename all the files in a folder with increasing numbers, that is:
toto.csv -> 1.csv
titi.csv -> 2.csv etc
It assumes the ordering is not important.
a=1; for i in *; do mv -n "$i" "$a.csv" ; let "a +=1"; done
To test it, you can prepare a test folder by opening a terminal and typing:
mkdir test
cd test
touch toto.csv titi.csv tata.csv
ls
Output:
tata.csv titi.csv toto.csv
Then you can run the following command:
a=1; for i in *; do mv -n "$i" "$a.csv" ; let "a +=1"; done
ls
Output:
1.csv 2.csv 3.csv
Explication:
a=1 declare a variable
for i in *; begin to iterate over all files in the folder
do mv will move (rename) a file of the list (that is, the variable $i) to a new name called a.csv
and we increment the counter a, and close the loop.
the option -n will make sure no file gets overwritten by the command mv
I assumed there was no specific criterion to rename the files. If there is a specific structure (pattern) in the renaming, the bash command can probably accommodate it, but the question should then give more details about these requirements :)
I want to create one unix command, which will unzip the folder.
so, I am searching for the code, but I am not aware that how should I use such code to make Unix command?
I have gone through various questions & answers but I don't get any perfect information.
So, can any one please suggest me any code (in C++ or C or any language to make exe) and to use it as a Unix command.
NOTE: I know command like 'unzip' is available in 'Mks toolkit' type of software but we can not use it, so I want to make command which can run through 'command prompt'
If you want to add a command, you only need to create your executable and put its link in the /usr/bin folder.
Just compile your code and set a link to it's executable like this:
ln -s /path/to/your_executable /usr/bin/command_name
If there exists a command that you need to modify, you should set an alias to it. For example, you want ls -1 to run whenever ls is used, then you only need to use the command:
alias ls=ls -1
or put the same command in the .bashrc file in your home directory.
I've got a file structure that looks like:
A/
2098765.1ext
2098765.2ext
2098765.3ext
2098765.4ext
12345.1ext
12345.2ext
12345.3ext
12345.4ext
B/
2056789.1ext
2056789.2ext
2056789.3ext
2056789.4ext
54321.1ext
54321.2ext
54321.3ext
54321.4ext
I need to rename all the files that begin with 20 to start with 10; i.e., I need to rename B/2022222.1ext to B/1022222.1ext
I've seen many of the other questions regarding renaming multiple files, but couldn't seem to make it work for my case. Just to see if I can figure out what I'm doing before I actually try to do the copy/renaming I've done:
for file in "*/20?????.*"; do
echo "{$file/20/10}";
done
but all I get is
{*/20?????.*/20/10}
Can someone show me how to do this?
You just have a little bit of incorrect syntax is all:
for file in */20?????.*; do mv $file ${file/20/10}; done
Remove quotes from the argument to in. Otherwise, the filename expansion does not occur.
The $ in the substitution should go before the bracket
Here is a solution which use the find command:
find . -name '20*' | while read oldname; do echo mv "$oldname" "${oldname/20/10}"; done
This command does not actually do your bidding, it only prints out what should be done. Review the output and if you are happy, remove the echo command and run it for real.
Just wanna add to Explosion Pill's answer.
On OS X though, you must say
mv "${file}" "${file_expression}"
Or the mv command does not recognize it.
Brace expansions like :
{*/20?????.*/20/10}
can't be surrounded by quotes.
Instead, try doing (with Perl rename) :
rename 's/^10/^20/' */*.ext
You can do this using the Perl tool rename from the shell prompt. (There are other tools with the same name which may or may not be able to do this, so be careful.)
If you want to do a dry run to make sure you don't clobber any files, add the -n switch to the command.
note
If you run the following command (linux)
$ file $(readlink -f $(type -p rename))
and you have a result like
.../rename: Perl script, ASCII text executable
then this seems to be the right tool =)
This seems to be the default rename command on Ubuntu.
To make it the default on Debian and derivative like Ubuntu :
sudo update-alternatives --set rename /path/to/rename
The glob behavior of * is suppressed in double quotes. Try:
for file in */20?????.*; do
echo "${file/20/10}";
done