I'm trying to build the SDK and am running into an error. Unfortunately google isn't turning up anything specific to my problem. I've already ran "premake4 gmake" and then run mingw32-make, and the below error shows up.
C:\Users\Austin\Documents\programming\opengl\new\glsdk_0_5_2>mingw32-make
==== Building glload (debug) ====
gl_load_cpp.cpp
In file included from include/glload/gl_all.hpp:9:0,
from source/gl_load_cpp.cpp:4:
include/glload/_int_gl_exts.hpp:4840:18: error: declaration does not declare any
thing [-fpermissive]
source/gl_load_cpp.cpp:4181:46: error: expected unqualified-id before '=' token
source/gl_load_cpp.cpp: In function 'void gl::CopyFunctionPointers()':
source/gl_load_cpp.cpp:7501:17: error: expected primary-expression before '=' to
ken
source/gl_load_cpp.cpp:10080:17: error: expected primary-expression before '=' t
oken
Makefile:135: recipe for target 'Debug/gl_load_cpp.o' failed
mingw32-make[1]: *** [Debug/gl_load_cpp.o] Error 1
Makefile:16: recipe for target 'glload' failed
mingw32-make: *** [glload] Error 2
The errors seem to be related to the line, "extern _detail::Proc_glMemoryBarrier MemoryBarrier;", although I have no idea why.
EDIT: I ended up deleting this version of Mingw (supposedly the latest from their site) and downloaded an older version that compiled just fine. Not sure what exactly the issue was but if someone else sees this try this.
Related
I am building a User Defined Function in ANSYS Fluent which calls my installation of MSVS 2017 to compile the code. The problem is I get the error:
fatal error C1128: number of sections exceeded object file format limit: compile with /bigobj
I have found others with this problem, but I still have not been able to figure out how to add a line in my code to get the compiler to recognize this. Based on finding other snippets of code online, I have tried to add the lines after the includes at the top of the code:
#include "udf.h"
#include "unsteady.h"
#include "dynamesh_tools.h"
ADD_DEFINITIONS(/bigobj)
SET(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} /bigobj")
But this gives the errors:
..\..\src\MY_UDF.c(10): error C2143: syntax error: missing ')' before '/'
..\..\src\MY_UDF.c(10): error C2143: syntax error: missing '{' before '/'
..\..\src\MY_UDF.c(10): error C2059: syntax error: '/'
..\..\src\MY_UDF.c(10): error C2059: syntax error: ')'
I don't understand these errors, as these were copied from someone else's working code. I also tried, from a different snippet I found online:
QMAKE_CXXFLAGS += -bigobj
But this gives the error below.
..\..\src\MY_UDF.c(9): error C2143: syntax error: missing '{' before '+='
..\..\src\MY_UDF.c(9): error C2059: syntax error: '+='
This is the top of my udf file, which runs until I add too many lines to it and get the error shown above.
#include "udf.h"
#include "unsteady.h"
#include "dynamesh_tools.h"
I expect the code to compile but it doesn't. I have not found any solution that shows exactly how to tell the compiler what it tells me I should tell it.
Your answer is in the link below, you must just add a /bigobj to the makefile_nt.udf file of Fluent! Thats really a life saver!
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/5043c081-a317-4528-a02d-d4b6e6d21543/problem-with-bigobj-when-compiled-by-other-software?forum=msbuild
I have to install RSelenium package in R studio server on Linux,
however I've found these error messages.
I want to know the cause and the solution.
###error message after install.packages("RSelenium")
semver200.h:51:60: error: ‘Prerelease_identifiers’ does not name a type
semver200.h:51:82: error: ISO C++ forbids declaration of ‘parameter’ with no
type [-fpermissive]
semver200.h:52:55: error: ‘Build_identifiers’ does not name a type
semver200.h:52:72: error: ISO C++ forbids declaration of ‘parameter’ with no
type [-fpermissive]
make: *** [RcppExports.o] Error 1
ERROR: compilation failed for package ‘semver’
* removing ‘/home/data/R/x86_64-redhat-linux-gnu-library/3.3/semver’
Error: Command failed (1) ####end
try to access my site showing this error.
Fatal error: Class 'Front' not found in /home/ezaboon/public_html/system/framework.php on line 93
Problem fixed. am uninstall vqmod.
I have been trying recently to get UVC (USB Video Class) extension unit up and running.I did make some progress (by getting vidcap_i.c by a lead from a message from another forum),but I have not been able to go through due to compilation errors and I hope I could get some help here for the subject.
I have created all the necessary files ,which I was guided by the sample at Microsoft site,except the sample application.
Their content is the same as at the UVC sample link.
*Note:I got a little confused by the line that says "Copy Extend.def from the WIA extend sample and edit it. Uvcxuplugn.def should contain".I hope I got it correctly - I have copied the extend.def file from WDK samples directory to
c:\xu directory ,edited the file ,added the necessary content and saved it as Uvcuplugn.def file.
After building using the Build environment ,this is the output of the compilation :
C:\xu>Build -cZg
BUILD: Compile and Link for AMD64
BUILD: Start time:
BUILD: Examining c:\xu directory for files to compile.
c:\xu Invalidating OACR warning log for 'root:amd64chk'
BUILD: Building generated files in c:\xu directory
Configuring OACR for 'root:amd64chk' -
Running MIDL on - interface.idl
BUILD: Compiling c:\xu directory
Compiling - interface_i.c
Compiling - vidcap_i.c
Compiling - uvcxuplgn.cpp
1>errors in directory c:\xu
1>c:\xu\xuproxy.h(69) : error C2017: illegal escape sequence
1>c:\xu\xuproxy.h(71) : error C2059: syntax error : '__uuidof'
1>c:\xu\xuproxy.h(71) : error C2017: illegal escape sequence
1>c:\xu\xuproxy.h(71) : error C2332: 'struct' : missing tag name
1>c:\xu\xuproxy.h(71) : error C2011: '' : 'enum' type redefinition
1>c:\xu\uvcxuplgn.cpp(7) : error C2143: syntax error : missing ';' before '{'
1>c:\xu\uvcxuplgn.cpp(7) : error C2447: '{' : missing function header (old-style
formal list?)
1>c:\xu\uvcxuplgn.cpp(31) : error C2065: 'ObjectMap' : undeclared identifier
Compiling - stdafx.cpp
Compiling - xuproxy.cpp
Building Library - objchk_win7_amd64\amd64\uvcxuplgn.lib
1>link : error LNK1181: cannot open input file 'c:\xu\objchk_win7_amd64\amd64\uv
cxuplgn.obj'
BUILD: Compile errors: not linking c:\xu directory
BUILD: Finish time:
BUILD: Done
12 files compiled - 1 Warning - 8 Errors
1 library built - 1 Error
I get the same errors no matter what the target is (x86,x64,ia64)
Now,let's review errors one by one ,starting from the last :
LNK1181->No idea about that error.I have done clean ups of the build and that did not help
at all.But this is probably the easiest error to resolve,hope you would be able to give me
a lead on the subject.
uvcxuplgn.cpp,Line 7 ,the problematic syntax is :BEGIN_OBJECT_MAP(ObjectMap).
According to Microsoft's documentation (http://msdn.microsoft.com/en-us/library/10fb0d3e(v=vs.90).aspx) , this directive is defined at atlcom.h,which is included
in the file ,so I am really confused about the cause of this error.
The last errors relate to last 5 lines of extension unit proxy header file (cannot post code here due to errors-check this page (http://msdn.microsoft.com/en-us/library/windows/hardware/ff568134(v=vs.85).aspx)
Again,no idea ,why it shouldn't compile.Hope I could get some lead on the subject
Sorry for the long post,hope you could help me (and probably many others) who struggle with this Windows UVC extension unit subject
First, you always have to look at the first error that happens. The others are often following errors. So just delete the wrong escape sequence () in line 69 and in line 71 in xuproxy.h.
The linking error only happens, because the compiler couldnt compile the .cpp files earlier, so the object file is missing.
I am attempting to build OpenCV 2.3.1 on a 64 bit OSX Mountain Lion machine and can't get past a particular set of "use of undeclared identifier" make errors. I have attempted to build both the taz.gz file and source from Git with the same errors.
Has anyone successfully built 2.3.1 on a OSX Mountain Lion machine? If so, how did you get past the following errors:
opencv/modules/highgui/src/cap_ffmpeg_impl.hpp:486:5: error:
use of undeclared identifier 'av_open_input_file' av_open_input_file(&ic, filename, NULL, 0, NULL);
opencv/modules/highgui/src/cap_ffmpeg_impl.hpp:494:5: error:
use of undeclared identifier 'avcodec_thread_init'avcodec_thread_init(enc, get_number_of_cpus());
opencv/modules/highgui/src/cap_ffmpeg_impl.hpp:524:15: error:
use of undeclared identifier 'av_open_input_file'
int err = av_open_input_file(&ic, _filename, NULL, 0, NULL);
opencv/modules/highgui/src/cap_ffmpeg_impl.hpp:541:9: error:
use of undeclared identifier 'avcodec_thread_init'
avcodec_thread_init(enc, get_number_of_cpus());
As of now I see a couple of options. I could switch to Ubuntu which appears to have an easier build process or I could fix the highgui code.
If you have previous experience building this version I would appreciate the help.