I need to write a C++ application that should read firewall status of Windows, and then need to keep an eye continuously if admin/someuser
changes the firewall status (lets say when my program was started firewall was disabled and after sometime Admin enabled it).
To implement this, I have created a thread that periodically(10 seconds) poll the code that checks Windows firewall status, but this doesn't look an efficient solution to me as continuous polling is required.
Is there a way to get event automatically in my program if firewall status changes (for example, FindFirstChangeNotification, using this I can get notification if any change in directory)? This will avoid continuous polling and will make program more efficient I think.
Any help is appreciated.
I know there is Windows ETW which anti-viruses use and which has all the info you need. It is a big system log where you subscribe to log/event providers. Pretty much everything that happens in system gets reported there via event which you can listen/wait for. I don't know the links to more useful pages with a list of loggers connected to ETW so here is the more general page: https://learn.microsoft.com/en-us/windows-hardware/drivers/devtest/event-tracing-for-windows--etw-. You need to find out how to use C++ ETW API and the name/ID of the firewall events provider with a list of event types, then using API subscribe to this provider and setup a callback for when an event that interests you (here change of firewall status) occurs and that is it.
I have done a lot of searching to find a way to start a GUI application from a windows service on Windows 7. Most of what I have found is that with Windows 7 services now run in a separate user session and can not display any graphical interface to the current user. I'm wondering is there is any kind of workaround or different way of accomplishing something like this? Can the service start a process in a different user session?
This change was made for a reason and not simply to annoy developers. The correct approach is to put your UI in a different program and communicate with the session through a pipe, or some other IPC mechanism. The recommendation that services do not present UI is more than 10 years old now.
You should really try to follow these rules, even though it may seem inconvenient to begin with. On the plus side you will enjoy the benefit of keeping your service logic and UI logic separate
If your services runs under the LOCALSYSTEM account then you can check "Allow service to interact with desktop", for the benefit of legacy services that would fail if they could not show UI. But it won't help you anyway because the UI will show in session 0 where it is never seen!
I recommend you take a read of the official Microsoft document describing session 0 isolation.
There is a way to do this.
If you need to show a simple message box you can use the WTSSendMessage Routine.
If you need a complex UI elements you can put it in a separate program and you need to use CreateProcessAsUser Routine.
In this sample provided by microsoft you can see the process.
http://blogs.msdn.com/b/codefx/archive/2010/11/26/all-in-one-windows-service-code-samples.aspx
Windows 7 introduced what is called "Session 0 isolation" that in practice means that every service (except system services) run in a separate non-interactive session. For this reason you cannot directly create a GUI from within the service, except if you run in legacy mode by flagging the Interact With Destop option, which is not good if you plan to run your service for some years in the future.
As David Heffernan said, the best is to use a client-server architecture. WCF makes it easy to communicate with named pipes.
This page is a good starting point to read about Session 0 Isolation and this white paper is also very good.
I've been looking everywhere for some information as to how one might go about registering for power state changes in a C++ application. I don't have a window handle and the program does not always run in as a service. I see that there are powerstate broadcasts available to register for but I cant seem to find anyway to get to them. Any one have any idea?
Once I've received a power state change, I plan on informing all connected users to that machine.
I have a C++ Win32 application that was written as a Windows GUI project, and now I'm trying to figure out to make it into a Service / GUI hybrid. I understand that a Windows Service cannot / should not have a user interface. But allow me to explain what I have so far and what I'm shooting for.
WHAT I HAVE NOW is a windows application. When it is run it places an icon in the system tray that you can double-click on to open up the GUI. The purpose of this application is to process files located in a specified directory on a nightly schedule. The GUI consists of the following:
A button to start an unscheduled scan/process manually.
A button to open a dialog for modifying settings.
A List Box for displaying status messages sent from the processing thread.
A custom drawn window for displaying image data (the file processing includes the creation and saving of images).
A status bar - while a process is not running, it shows a countdown to the next scheduled scan. During a scan it also provides some status feedback, including a progress bar.
WHAT I'M SHOOTING FOR is a service that will run on boot-up and not require a user to login. This would consist of the scheduled file processing. However, when a user logs in I would still like the tray icon to be loaded and allow them to open up a GUI as I described above to monitor the current state of the service, change settings, start a scan manually, and monitor the progress of a scan.
I'm sure that I have seen applications like this - that function as a service even when I'm not logged in, but still give me a user interface to work with once I do log in.
I'm thinking that instead of having a single multi-threaded application that sends messages to the GUI thread from the processing thread, I need two applications - a Service to perform the processing and a GUI application to provide visual feedback from the Service and also send messages to the Service (for example, to start a scan manually). But I am new to Windows Services and have no idea how this is done.
It is also possible that I'm completely off base and a Service is not what I'm looking for at all.
Any help / ideas / suggestions would be greatly appreciated! Thank you.
You can't do this as a service.
You'll need to make your Windows Service as a normal service application. This will startup on system startup, and run the entire time the system is up.
You'd then make a completely separate GUI application, which "talks" to the service. This can be set to run when a user logs in, in the user's account.
In order to make them "talk" to each other, you'll need to use some form of IPC. Since these run on the same system (but in different accounts, typically), named pipes or sockets both work quite well.
There is a simple way of doing it.
You can’t have the service access any user’s session (session 1,2,3..) since services are isolated and can access session 0 only. This is a change from 2011.
You should write a win32 program to be launched by your service per each user who logs in using https://msdn.microsoft.com/en-us/library/windows/desktop/ms682429(v=vs.85).aspx
The service can continue performing any task that isn’t user specific.
I have written a Windows service that allows me to remotely run and stop applications. These applications are run using CreateProcess, and this works for me because most of them only perform backend processing. Recently, I need to run applications that present GUI to the current log in user. How do I code in C++ to allow my service to locate the currently active desktop and run the GUI on it?
Roger Lipscombe's answer, to use WTSEnumerateSessions to find the right desktop, then CreateProcessAsUser to start the application on that desktop (you pass it the handle of the desktop as part of the STARTUPINFO structure) is correct.
However, I would strongly recommend against doing this. In some environments, such as Terminal Server hosts with many active users, determining which desktop is the 'active' one isn't easy, and may not even be possible.
But most importantly, if an application will suddenly appear on a user's desktop, this may very well occur at a bad time (either because the user simply isn't expecting it, or because you're trying to launch the app when the session isn't quite initialized yet, in the process of shutting down, or whatever).
A more conventional approach would be to put a shortcut to a small client app for your service in the global startup group. This app will then launch along with every user session, and can be used start other apps (if so desired) without any juggling of user credentials, sessions and/or desktops.
Also, this shortcut can be moved/disabled by administrators as desired, which will make deployment of your application much easier, since it doesn't deviate from the standards used by other Windows apps...
The short answer is "You don't", as opening a GUI program running under another user context is a security vulnerability commonly known as a Shatter Attack.
Take a look at this MSDN article: Interactive Services. It gives some options for a service to interact with a user.
In short you have these options:
Display a dialog box in the user's session using the WTSSendMessage function.
Create a separate hidden GUI application and use the CreateProcessAsUser function to run the application within the context of the interactive user. Design the GUI application to communicate with the service through some method of interprocess communication (IPC), for example, named pipes. The service communicates with the GUI application to tell it when to display the GUI. The application communicates the results of the user interaction back to the service so that the service can take the appropriate action. Note that IPC can expose your service interfaces over the network unless you use an appropriate access control list (ACL).
If this service runs on a multiuser system, add the application to the following key so that it is run in each session: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run. If the application uses named pipes for IPC, the server can distinguish between multiple user processes by giving each pipe a unique name based on the session ID.
WTSEnumerateSessions and CreateProcessAsUser.
Several people suggested WTSEnumerateSessions and CreateProcessAsUser. I wonder why no one suggested WTSGetActiveConsoleSessionId, since you said you only want to target one logged in user.
Several people sure are right to suggest CreateProcessAsUser though. If you call plain old CreateProcess the way you said, then the application's GUI will run with your service's privileges instead of the user's privileges.
That problems Session 0 , Interactive Services ,
Windows Service Allow Service To Interact With Desktop
on Windows 7 or Windows Vista
You can read this article
http://www.codeproject.com/KB/vista-security/SubvertingVistaUAC.aspx
I try explained here it's working on Windows 7
On Win2K, XP and Win2K3 the console user is logged on in Session 0, the same session the services live in. If a service is configured as interactive, it'll be able to show the UI on the user's desktop.
However, on Vista, no user can be logged on in Session 0. Showing UI from a service there is a bit trickier. You need to enumerate the active sessions using WTSEnumerateSessions API, find the console session and create the process as that user. Of course, you need also a token or user credentials to be able to do that. You can read more details about this process here.
I think as long as you have only one user logged in, it will automatically display on that user's desktop.
Anyway, be very careful when having a service start an exe.
If the write access to the folder with the exe is not restricted, any user can replace that exe with any other program, which will then be run with sytem rights. Take for example cmd.exe (available on all windows sytems). The next time the service tries to start your exe, you get a command shell with system rights...
If you launch a GUI from your service it will show up on the currently active desktop.
But only if you adjusted the service permissions: You need to allow it to interact with the desktop.
Important Services cannot directly interact with a user as of Windows Vista. Therefore, the techniques mentioned in the section titled Using an Interactive Service should not be used in new code.
This is taken from : http://msdn.microsoft.com/en-us/library/ms683502(VS.85).aspx