I'm trying to install gtk+-3.6.4
My configuration breaks with the following error:
checking Pango flags... -pthread -I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -L/usr/local/lib -lpangocairo-1.0 -lpango-1.0 -lcairo -lgobject-2.0 -lglib-2.0
checking for GDK_DEP... yes
checking for ATK... no
configure: error: Package requirements (atk atk-bridge-2.0) were not met:
No package 'atk-bridge-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables ATK_CFLAGS
and ATK_LIBS to avoid the need to call pkg-config.
I've already installed
sudo apt-get install libatk1.0*
Any idea how to fix this ?
I had the exact same error, in my case i used
sudo apt-get install libatk-bridge2.0
Take note i'm using Ubuntu, anyways the package you want is libatk-bridge2.0 if i'm correct.
Try to install libatk1.0-dev. That package contains header files for ATk. In Debian based systems, like Mint or Ubuntu, packages with different suffix have special meanings. Let's say libatk1.0 package. In Debian, it is splited to libatk1.0-0 libatk1.0-data libatk1.0-dev libatk1.0-dbg libatk1.0-doc.
If you just need ATK program(or other programs need it for package dependency), libatk1.0-0 is needed to install.
If we want to look up API documentation of ATK, libatk1.0-doc is needed, and we can look up its API manual in Devhelp.
libatk1.0-dbg package is almost never needed by common users. It's used for debugging ATK program.
libatk1.0-dev contains C header files. If a program is complied now, and it calls ATK's API, it needs atk's header files(like your problow). If you want to see where the headers files are installed, use this command: dpkg -L libatk1.0-dev.
In my case, the libatk-bridge package could not be installed through apt-get and it didn't find the related packages, so I downloaded and installed the packages from Ubuntu package repository:
http://packages.ubuntu.com/quantal/libatk-bridge2.0-dev
http://packages.ubuntu.com/quantal/libs/libatk-bridge2.0-0
Related
So I follow the official tutorial for the installation : https://mongodb.github.io/mongo-cxx-driver/mongocxx-v3/installation/
Neverless, I can't use the produced libraries as static.
So I managed to compile the C version of the driver as described, I've enabled the flag --enable-static=yes with the ./configure before doing make && sudo make install and I got the libmongoc-1.0.a and the libbson-1.0.a which are static. So this far, everything it's alright.
Then I have done the cxx version of the driver, except that there is no configuration file as in the C version. So I've juste done a
cmake -DCMAKE_BUILD_TYPE=Release -DBSONCXX_POLY_USE_BOOST=1 -DCMAKE_INSTALL_PREFIX=/usr/local
from the build folder, followed by a make && sudo make install
So I got the libmongocxx.a and the libbsoncxx.a, but when I try to compile with them, I can't run the binary because I got the following error :
error while loading shared libraries: libmongocxx.so._noabi: cannot open shared object file: No such file or directory
So I understand that is because there is some symbols missing and then I need to use the shared library to run the binary but I don't want this to happend, I want the symbols within the binary that I can run it without any LD_PRELOAD.
Any suggestions ?
I had the same issue in an Ubuntu 16.04 and I run a apt-get update & apt-get upgrade and the problem was solved.
It seems that there were some update to the compiler and some libraries that prevent some test from reaching the shared libraries.
I have a similar question, and solved, now I compiled and run my binary with static libs successfully.
I write my build script using newlisp, but the static link options are very helpful, I paste it here.
c++ /to/your/path/site/code/back_end/builder/object/files1.cc.o ... /to/your/path/site/code/back_end/builder/object/files10.cc.o -o bin/site -static-libgcc -static-libstdc++ -L/usr/lib -lpthread -l:libmongocxx.a -l:libbsoncxx.a -l:libmongoc-1.0.a -l:libbson-1.0.a -lrt -lssl -lcrypto -lsasl2 -l:libboost_log.a -l:libboost_log_setup.a -l:libboost_system.a -l:libboost_thread.a -l:libboost_filesystem.a -lcppcms -lbooster -lcurl -ljsoncpp
I have compiled qt 5.5 for static building and it works fine.
However, when I add the widgets "QT += widgets" in the pro file I get the link error "cannot find -IGL"
From what I read this is to do with the Open GL libs. I have tried the following:
sudo apt-get install libglu1-mesa-dev
and
sudo apt-get install libgl1-mesa-dev
But no luck here... I am wondering if I need a static version of this? or maybe a symlink is missing, but I can't figure out the next step :(
Edit This is the actual error message:
g++ -static -static-libgcc -static-libstdc++ -Wl,-O1 -o ../targetRel/McpSupervisor main.o cconfig.o cconfigxml.o mcpprocessbase.o rpeprocess.o supervisor.o cipcomms.o mcpsupervisor_plugin_import.o moc_mcpprocessbase.o moc_supervisor.o moc_cipcomms.o -L/usr/lib/i386-linux-gnu/mesa -L/usr/local/Qt-5.5.1/lib -lQt5Xml -lQt5Widgets -L/usr/local/Qt-5.5.1/plugins/bearer -lqconnmanbearer -lqgenericbearer -lqnmbearer -lQt5Network -L/usr/local/Qt-5.5.1/plugins/platforms -lqxcb -L/usr/local/Qt-5.5.1/plugins/xcbglintegrations -lqxcb-glx-integration -lxcb-glx -lQt5XcbQpa -lX11-xcb -lXi -lxcb-render-util -lxcb-render -lxcb -lxcb-image -lxcb-icccm -lxcb-sync -lxcb-xfixes -lxcb-shm -lxcb-randr -lxcb-shape -lxcb-keysyms -lxcb-xkb -lQt5PlatformSupport -lfontconfig -lfreetype -lQt5DBus -lXrender -lXext -lX11 -L/usr/local/Qt-5.5.1/plugins/imageformats -lqdds -lqicns -lqico -lqjp2 -lqmng -lqtga -lqtiff -lqwbmp -lqwebp -lQt5Gui -lpng -lqtharfbuzzng -lQt5Core -lz -licui18n -licuuc -licudata -lqtpcre -lm -ldl -pthread -lgthread-2.0 -lglib-2.0 -lrt -lGL -lpthread
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libX11.a(CrGlCur.o): In function open_library':
(.text+0x33): warning: Using 'dlopen' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/bin/ld: cannot find -lGL
/usr/local/Qt-5.5.1/plugins/imageformats/libqjp2.a(jas_stream.o): In functionjas_stream_tmpfile':
jas_stream.c:(.text+0x7a4): warning: the use of tmpnam' is dangerous, better usemkstemp'
/usr/local/Qt-5.5.1/lib/libQt5Core.a(qfilesystemengine_unix.o): In function QFileSystemEngine::resolveGroupName(unsigned int)':
qfilesystemengine_unix.cpp:(.text+0x943): warning: Using 'getgrgid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libglib-2.0.a(libglib_2_0_la-gutils.o): In functiong_get_user_database_entry':
(.text+0x25a): warning: Using 'getpwuid' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/lib/gcc/i686-linux-gnu/4.8/../../../i386-linux-gnu/libglib-2.0.a(libglib_2_0_la-gutils.o): In function g_get_user_database_entry':
(.text+0xa3): warning: Using 'getpwnam_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/local/Qt-5.5.1/lib/libQt5Core.a(qfilesystemengine_unix.o): In functionQFileSystemEngine::resolveUserName(unsigned int)':
qfilesystemengine_unix.cpp:(.text+0x592): warning: Using 'getpwuid_r' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
/usr/local/Qt-5.5.1/lib/libQt5Network.a(qhostinfo_unix.o): In function `QHostInfoAgent::fromName(QString const&)':
qhostinfo_unix.cpp:(.text+0x580): warning: Using 'getaddrinfo' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
collect2: error: ld returned 1 exit status
make: *** [../targetRel/McpSupervisor] Error 1
09:49:17: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project qtMain (kit: Qt 5.5.1 GCC 32bit Static)
When executing step "Make"
09:49:17: Elapsed time: 00:08.
What is your actual problem :
You have unmet dependencies .
You are thinking that you have all the required dependencies because you installed
sudo apt-get install libglu1-mesa-dev
sudo apt-get install libgl1-mesa-dev
The problem is that you have a i386 system that is x32 system.
But you have installed development files for x64 systems using the commands above
Here is the ANSWER :
Intsall the following things
sudo apt-get install libgl1-mesa-dev:i386
sudo apt-get install libglu1-mesa-dev:i386
Now it should work ;)
Some other helpful stuff for visitors to this particular question
The lines below were my attempt to solve the problem but they did not work because the person who asked the question has a x32 system but the comments below work for x64 systems . But never the less the meta answer below will serve well for people who have the same problem and x64 systems. And also it will help problem to understand what are the basic steps to do after a similar problem occurs
# code_fodder I wanted to ask a question by making a comment below your question but I do not have 50 reputations to do so.
So I have to use the answer submission form to do so. :(
Do you have Miscellaneous Mesa GL utilities ?
If you dont have them then install using
sudo apt-get install mesa-utils
If you want to use OpenGl ES then you have to install Miscellaneous Mesa utilies (opengles, egl) using
sudo apt-get install mesa-utils-extra
Let me know if that works .
POSTING NEW INFORMATION ON 17-DEC-2015
I will post a portion of my project.pro file here . It specifically contains the library linking methods that I used for a simple OpenGL project.
I am using GLEW with OpenGL and SDL2
TEMPLATE = app
CONFIG += console
CONFIG -= app_bundle
CONFIG -= qt
SOURCES += main.cpp \
mesh.cpp \
display.cpp \
shader.cpp
HEADERS += \
mesh.h \
display.h\
shader.h
unix|win32: LIBS += -lGL \
-lGLEW \
/usr/local/lib/libSDL2-2.0.so
As you can notice I am using both static and dynamically linked libraries.
You may need to add:
unix | win32: LIBS += -L/usr/lib/x86_64-linux-gnu/mesa/ to your .pro file. However the path may be different for 32 bit systems. In that folder there are is the required mesa library files. These are the files for my system.
zehel#zehel-PC:/usr/lib/x86_64-linux-gnu/mesa$ ls
ld.so.conf libGL.so libGL.so.1 libGL.so.1.2.0
Try compiling now and see if that works
If that doesn't then either you have unmet dependencies or you are using old OpenGL.
Now after running the sudo apt-get install mesa-utils you will be able to use a command called glxinfo . It will show you all required information about your graphics card.
Run glxinfo | grep "OpenGl version string"
It will show you what version of OpenGl and mesa you have
mine is like this
OpenGL version string: 3.0 Mesa 10.3.2
If they are less than 3.0 then you are not using modern OpenGL and you may want to update your graphics drivers.
But if they are 3.0 or above then you are probably okay.
I cant reproduce your problem so I think that you have missing dependencies
See this posts on the QT forum where people with same problem as you are saying that there problems were fixed after installing the dependencies
http://forum.qt.io/topic/36282/solved-qt-5-2-0-and-lgl-issue
The last answer in the qt forum is quite good please refer it.
Update me whether it works or not .
Hope That helps .
You might need to specify the path where the GL library can be found, for exmaple by using the -L option to GCC, which has the following man page description:
-Ldir
Add directory dir to the list of directories to be searched for -l.
I have downloaded and installed the NTL library on my Ubuntu. I'm currently using gedit to write my program and having included this ZZ.h header in my program. This is how i compile my program in the terminal: - g++ keygen.cpp -o keygen -I ../include -L ../lib -lntl -lm.
I'm pretty sure this line is correct but for some unknown reason, i get the following error:
KeyGen.cpp:9:20: error: NTL/ZZ.h: No such file or directory
KeyGen.cpp:15: error: expected constructor, destructor, or type conversion before ‘int’
The solution seems pretty straightforward to me: which is to add the NTL library directly to my program folder. I did just that, but still i get the same error.
If you don't need the latest (6.0.0) version of NTL you may do as follows in your Ubuntu:
user#host:~$ sudo apt-get install libntl-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libntl-5.4.2
The following NEW packages will be installed:
libntl-5.4.2 libntl-dev
0 upgraded, 2 newly installed, 0 to remove and 112 not upgraded.
Need to get 2,035 kB of archives.
After this operation, 7,016 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.de.debian.org/debian/ squeeze/main libntl-5.4.2 amd64 5.4.2-4 [767 kB]
Get:2 http://ftp.de.debian.org/debian/ squeeze/main libntl-dev amd64 5.4.2-4 [1,268 kB]
Fetched 2,035 kB in 2s (1,017 kB/s)
Selecting previously deselected package libntl-5.4.2.
(Reading database ... 59184 files and directories currently installed.)
Unpacking libntl-5.4.2 (from .../libntl-5.4.2_5.4.2-4_amd64.deb) ...
Selecting previously deselected package libntl-dev.
Unpacking libntl-dev (from .../libntl-dev_5.4.2-4_amd64.deb) ...
Can not write log, openpty() failed (/dev/pts not mounted?)
Setting up libntl-5.4.2 (5.4.2-4) ...
Setting up libntl-dev (5.4.2-4) ..
user#host:~$
after that the complete compiled NTL library with all development headers is installed in your system and you may compile your program with it without any additional -I<path>.
If you need a newer version that your distro has (check http://packages.ubuntu.com/en/source/trusty/ntl) you may try to build the library package yourself.
The problem with your attempt to compile and output an executable file appears to be compiler's inability to link the necessary library after obtaining an object .o file.
Many people often test the point of fault by separating the two stages by first compiling g++ -c then by linking the libraries for an executable g++ -o. Although -Wall switch does not always work, trying it to provide you with as much information as possible during compilation can also be helpful.
Check this webpage. As for using different switches to link libraries try this webpage.
I'm not certain if it was a typo; but I wonder if the space between the switch and directory:-I ../include and -L ../libwas the problem.
You said in comments:
Icreated a folder called 'include' within the .cpp folder and included the NTL library in that folder already
But your compilation command says:
g++ keygen.cpp -o keygen -I ../include -L ../lib -lntl -lm.
It seems to me, you meant:
g++ keygen.cpp -o keygen -I ./include -L ../lib -lntl -lm.
# ^^^^^^^^^
since .. goes up one directory.
I'm trying to build a 32-bit application on Ubuntu 11.04 x64. I'm having some issues with the build because of linker errors with libboost. The build statement has -lboost_system in it, but when I try to build I get a bunch of these:
CommunicationModule.cpp:(.text+0x68c1): undefined reference to boost::system::generic_category()
CommunicationModule.cpp:(.text+0x68d7): undefined reference to boost::system::system_category()
Everything I've found on google says I need to link to the boost_system library. One place I found says to try linking to it directly, but when i do locate boost_system the result is empty. When I try doing a sudo apt-get install libboost-system-dev it tells me that it's already installed. I'm kind of at a loss here. The library is installed, but it's not being found by locate?
Can anyone tell me what I need to do to properly link to boost::system? I'm fairly new to linux and the complexities of compilers so any help here would be appreciated.
Update:
Here is the output of dpkg -L libboost-system1.42-dev:
/.
/usr
/usr/share
/usr/share/doc
/usr/share/doc/libboost-system1.42-dev
/usr/share/doc/libboost-system1.42-dev/copyright
/usr/share/doc/libboost-system1.42-dev/NEWS.Debian.gz
/usr/share/doc/libboost-system1.42-dev/README.Debian.gz
/usr/lib
/usr/lib/libboost_system.a
/usr/lib/libboost_system-mt.so
/usr/lib/libboost_system-mt.a
/usr/lib/libboost_system.so
Is there a flag I can use to link to one of these directly? I tried using -L /usr/lib/libboost_system.so and -L /usr/lib/libboost_system-mt.so and neither of those fixed the issue. Same with just adding /usr/lib/libboost_system.a and /usr/lib/libboost_system-mt.a to the build statement.
Here is the compilation line:
g++ -m32 -Wl,-O1 -o UTNaoTool [.o files] -L/usr/lib32 -lqglviewer-qt4 -lqwt-qt4 -lboost_system -lboost_thread -lQtXml -lQtOpenGL -lQtGui -lQtNetwork -lQtCore -lGLU -lpthread
Update 2:
I downloaded boost 1.49 and built everything for 32-bit and that seemed to help. A lot of the errors went away, but now I still have these:
CommunicationModule.cpp:(.text+0x68c1): undefined reference to
boost::system::get_generic_category()
Note that the function is different. So all of my errors are regarding undefined references to get_system_category() and get_generic_category() now. I tried adding a -lboost_filesystem to the build command but that didn't fix this, and I made sure it was referencing the 32-bit library that I built when I built libboost_system.
Looking at my own installation, it seems libboost-system-dev does not install the libraries. Using dpkg to tell me what was installed bz libboost-system-dev I get:
$ dpkg -L libboost-system-dev
/.
/usr
/usr/share
/usr/share/doc
/usr/share/doc/libboost-system-dev
/usr/share/doc/libboost-system-dev/copyright
/usr/share/doc/libboost-system-dev/changelog.gz
Poking around, I think you need to install libboost-system1.48.1 (or some other version).
sudo apt-get install libboost-system1.XX.Y
You can also search fo rthe libraries using the find command, for example, search under /usr for all files starting with libboost_system:
find /usr -name "libboost_system*"
Edit: Since you are cross-compiling from a 64 bit OS to a 32 bit one, you need 32 bit versions of the boost libraries. I would be tempted to set up a small 32 bit virtual machine to do this, rather than cross-compiling all the dependencies.
I had the same problem with boost_serialization here is what i found out after couple of googling..
first this library need to be compiled separately :
so after downloading the boost library ,extract it and execute sudo ./bootstrap.sh' then
sudo ./b2 --with-system
after this step you should be find a result when executing locate boost_system
then to link it manually I did:
both should work
g++ boostexample.cpp -o run /PATH/libboost_serialization.a
g++ boostexample.cpp -o run -L/PATH/ -lboost_serialization
well this is a little work around and I'm still looking for how to link the library properly
I hope this helped :)
where are the opengl libraries get stored on ubuntu9.10 : i need this to mention in my make file and what are all the link files i need to mention
Install these to get OpenGL working:
sudo apt-get install mesa-common-dev
sudo apt-get install freeglut3
sudo apt-get install freeglut3-dev
The OpenGL files should be in:
/usr/include/GL/
The Terminal (Compiler) reads (e.g. g++) from:
/usr/bin/
Compile like this (you might need to link more libraries, but test this):
g++ filename -lglut -lGL -lGLU
/usr/lib/libGL.so
link with -lGL
You should not need to mention their location explicitly in your Makefile since they should be in the standard library search path (probably in /usr/lib).
Like sisis wrote you should just need to add -lGL to the linker flags to link against libGL.so which might actually come from different sources: mesa or some fancy graphics card driver.
They're part of mesa, as libGL*.so.* and the like, usually in /usr/lib*.