I have a client/server app which I have been developing on a single PC. Now it needs two serial ports, so I borrowed a PC from a friend.
When I build my app and try to run or debug it (whether in the Delphi IDE or from Windows File manager), it errors "The application was unable to start correctly (0xc000007b)".
Googling doesn't bring up much, but seems to indicate that this is nothing Delphi specific and happens with other apps. It seems to be caused by calling into a 32 bit DLL from a 64 bit app or vice versa.
both PCs are Windows 7, 64 bit
both have Delphi Xe2 starter edition which can only handle 32 bits
The app runs fine on my PC, but not on my friend's
Other Delphi apps run just fine on both PCs
Can anyone give me a hint as to how to track this down?
Normally we get the 0xC000007B error-code (which means STATUS_INVALID_IMAGE_FORMAT), if:
If a 32-bit app tried to load a 64-bit DLL.
Or if a 64-bit app tried to load a 32-bit DLL.
Or if a 64-bit app tried to run on a 32-bit Windows.
To really know, I would suggest to test whether there is a problem between your application and its dependencies using dependency walker
Note that all you need to do is open your App using said tool, and issues appear as red log-entries at buttom of screen.
(At least, at time of writting, namely 2022)
Also, make sure you run the correct version of Dependency Walker, for example, the x86 version will display incorrect results when openning x64 binaries.
A load time dependency could not be resolved. The easiest way to debug this is to use Dependency Walker. Use the Profile option to get diagnostics output of the load process. This will identify the point of failure and should guide you to a solution.
The most common cause of this error is trying to load a 64 bit DLL into a 32 bit process, or vice versa.
I tried all the things specified here and found yet another answer. I had to compile my application with 32-bit DLLs. I had built the libraries both in 32-bit and 64-bit but had my PATH set to 64-bit libraries. After I recompiled my application (with a number of changes in my code as well) I got this dreaded error and struggled for two days. Finally, after trying a number of other things, I changed my PATH to have the 32-bit DLLs before the 64-bit DLLs (they have the same names). And it worked. I am just adding it here for completeness.
It is a missing dll.
Possibly, your dll that works with com ports have an unresolved dll dependence.
You can use dependency walker and windows debugger. Check all of the mfc library, for example. Also, you can use nrCommlib - it is great components to work with com ports.
It has been mentioned in earlier answers that using dependency walker is the way to go, in my case (my application keeps failing with the error code), dependency walker showed a few dll that are NOT relevant!
Finally figured out that I can run profiling by going to "profile" menu and it will run the application and stop at the exact dll that's cause the problem! I found out a 32bit dll was picked because of path and fixed it.
I experienced the same problem developing a client-server app using Microsoft Visual Studio 2012.
If you used Visual Studio to develop the app, you must make sure the new (i.e. the computer that the software was not developed on) has the appropriate Microsoft Visual C++ Redistributable Package. By appropriate, you need the right year and bit version (i.e. x86 for 32 bit and x64 for 64 bit) of the Visual C++ Redistributable Package.
The Visual C++ Redistributable Packages install run-time components that are required to run C++ applications built using Visual Studio.
Here is a link to the Visual C++ Redistributable for Visual Studio 2015 .
You can check what versions are installed by going to Control Panel -> Programs -> Programs and Features.
Here's how I got this error and fixed it:
1) I developed a 32 bit application using Visual Studio 2012 on my computer.
Let's call my computer ComputerA.
2) I installed the .exe and the related files on a different computer we'll call ComputerB.
3) On ComputerB, I ran the .exe and got the error message.
4) On ComputerB, I looked at the Programs and Features and didn't see Visual C++ 2012 Redistributable (x64).
5) On ComputerB, I googled for Visual C++ 2012 Redistributable and selected and installed the x64 version.
6) On ComputerB, I ran the .exe on ComputerB and did not receive the error message.
I recently had an issue where I was developing an application (that used a serial port) and it worked on all the machines I tested it on but a few people were getting this error.
It turns out all the machines that the error happened on were running Win7 x64 and had NEVER ONCE been updated.
Running a Windows update fixed all of the machines in my particular case.
Actually this error indicates to an invalid image format. However, why this is happening and what the error code usually means? Actually this could be appear when you are trying to run a program that is made for or intended to work with a 64 bit Windows operating system, but your computer is running on 32 bit Operating system.
Possible Reasons:
Microsoft Visual C++
Need to restart
DirectX
.NET Framework
Need to Re-Install
Need to Run the application as an administrator
Source: http://www.solveinweb.com/solved-the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application/
This may be a case where debugging the debugger might be useful. Essentially if you follow the instructions here you can run two ide's and one will debug into the other. If you un your application in one, you can sometimes catch errors that you otherwise miss. Its worth a try.
I have seen the error trying to run VC++ debug executable on a machine which did not have Visual C++ installed. Building a release version and using that fixed it.
In my case the error occurred when I renamed a DLL after building it (using Visual Studio 2015), so that it fits the name expected by an executable, which depended on the DLL. After the renaming the list of exported symbols displayed by Dependency Walker was empty, and the said error message "The application was unable to start correctly" was displayed.
So it could be fixed by changing the output file name in the Visual Studio linker options.
You can have this if you are trying to manifest your application that it has a dependancy on the Microsoft.Windows.Common-Controls assembly. You do this when you want to load Version 6 of the common controls library - so that visual styles are applied to common controls.
You probably followed Microsoft's original documentation way back from Windows XP days, and added the following to your application's manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="X86"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Windows XP is no longer the OS, and you're no longer a 32-bit application. In the intervening 17 years Microsoft updated their documentation; now it's time for you to update your manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="*"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Raymond Chen has a lovely history of the Common Controls:
The history of the Windows XP common controls (archive)
The main problem, of course, is that a DLL file is missing, or, even more likely, corrupt. If this is the case, then I have some pretty good ideas (especially if you've downloaded and installed a DLL manually!)...
TLDR: Delete every manually copy/pasted DLL you've done, uninstall old redistributable installs, and reinstall new redistributables for both 32-bit and 64-bit installs.
What To Do
This solution of copying/pasting missing DLL's into system32, etc., used to work since I can remember in the 1990's, but it doesn't seem to work anymore (2020). So if you run into this problem recently, I suggest:
Within windows\system32 and windows\SysWOW64, delete all files that match ms*.dll, that the operating system will allow you delete as admin.
Uninstall all Visual C++ Redistributables that you have with Windows. This prevents the "You already have this!" dialogue showing up upon reinstall, as detailed in the next step when we re-install.
Reinstall the 2015-2019 Visual C++ Redistributable from a regularly available download site. If this does not work, download and install the others, but personally, the 2015-2019 covered everything for me. Regardless of your machine, install both x32 and x64 packages! (All Download Links: Collected VC++ Download Links; MSVCR120.dll Fix; MFC140U.dll Fix.)
How You Know It's Working
There's a lot of variation in coders experiencing this, so, the idea that there's one single, possible solution is often discarded, but let's be positive!
If deleting the matching ms*.dll files worked, then you will no longer get an error about error code 0xc000007b. Instead, you'll get a message about a missing .dll. This tells you that you're hitting the right code path!
If installing the redistributable works, then certain popular, DLL files should appear in the above-mentioned system32 and SysWO64 folders. For instance: MSVCR120.dll, MSVCR140.dll, MSVCR100.dll, MSVCP100.dll, MSVCP120.dll, MSVCP140.dll, and friends.
Last, Possible Best Chances
Sometimes things don't work according to plan (as we all in the Windows world know). You can also try the following!
Open the "Turn Windows Features on or off" tab in Windows (supported in Windows 8-10). Uncheck the .NET Framework installations. You'll see a small installation go by.
Restart the system. Go to the above feature again, recheck .NET Framework, and click "okay". If this works, you'll see a "installing and updating .NET framework" message that takes maybe a minute or so to go by. Once this is done, I recommend a reboot again.
Good luck!
Just solved this problem for my personal project (thanks to Dries for that). For me it was because the project path was too long. After saving the .sln to a shorter path (C:/MyProjects) and compiling from there it ran without the error.
Also download and unzip "Dependencies" into same folder where you put the wget.exe from
http://gnuwin32.sourceforge.net/packages/wget.htm
You will then have some lib*.dll files as well as wget.exe in the same folder and it should work fine.
(I also answered here https://superuser.com/a/873531/146668 which I originally found.)
I just ran into this issue. I searched for "C++" under my "Apps & Features" in Windows 10 control panel and noticed that some kind of update had just run a few days prior and installed VC++ Redistributable 2012-2017. The app that was running into the error message only required VC++ 2010. I uninstalled all of them and then reinstalled just 2010 x86/x64, and the error went away and the application functioned as expected.
That can happen if for some reason a x86 resource is loaded from a x64 machine. To avoid that explicitly, add this preprocessor directive to stdafx.h (of course, in my example the problematic resource is Windows Common Controls DLL.
#if defined(_WIN64)
#pragma comment(linker, "\"/manifestdependency:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='amd64' publicKeyToken='6595b64144ccf1df'\"")
#endif
It is possible that you have multiple versions of the dll(s) on your system. You can search your system to find out. The issue may be solved by simply changing the order of the directories in your path. This was my issue. (Cannot run Qt Creator GUI outside of Qt. "The application was unable to start correctly (0xc000007b)" error)
I ran into this issue when fetching code from my repository and compiling on a new machine. Copying over the entire repository and then compiling resulted in an executable which worked. Turns out a 32bit DLL accidentally wasn't checked in. As the people above state, use "Dependency Walker" to figure out where it goes wrong.
To make it more clear what to look for see the below screenshot, with in the background the exe trying to load the wrong DLL (notice the '64') resulting in "the application was unable to start correctly 0xc00007b" and in the foreground the exe which was simply copied over (which included the correct DLL).
I came here when I was searching for: "golang Windows (0xc00007b)"
I have an app written in Golang, which uses iconv. It worked on my machine, but not in someone else's machine.
The first error was the missing DLL: libiconv-2.dll, so I guess they downloaded it on the internet but it was the 32 bit and not 64 bit version, so the 0xc00007b error appeared.
I searched the DLL on my system but I did not have success until I searched on MinGW 64 path which in my case is: C:\msys64\mingw64\bin
The solution was to distribute the DLL with the .exe, which was in the MinGW folder.
Related
I have a client/server app which I have been developing on a single PC. Now it needs two serial ports, so I borrowed a PC from a friend.
When I build my app and try to run or debug it (whether in the Delphi IDE or from Windows File manager), it errors "The application was unable to start correctly (0xc000007b)".
Googling doesn't bring up much, but seems to indicate that this is nothing Delphi specific and happens with other apps. It seems to be caused by calling into a 32 bit DLL from a 64 bit app or vice versa.
both PCs are Windows 7, 64 bit
both have Delphi Xe2 starter edition which can only handle 32 bits
The app runs fine on my PC, but not on my friend's
Other Delphi apps run just fine on both PCs
Can anyone give me a hint as to how to track this down?
Normally we get the 0xC000007B error-code (which means STATUS_INVALID_IMAGE_FORMAT), if:
If a 32-bit app tried to load a 64-bit DLL.
Or if a 64-bit app tried to load a 32-bit DLL.
Or if a 64-bit app tried to run on a 32-bit Windows.
To really know, I would suggest to test whether there is a problem between your application and its dependencies using dependency walker
Note that all you need to do is open your App using said tool, and issues appear as red log-entries at buttom of screen.
(At least, at time of writting, namely 2022)
Also, make sure you run the correct version of Dependency Walker, for example, the x86 version will display incorrect results when openning x64 binaries.
A load time dependency could not be resolved. The easiest way to debug this is to use Dependency Walker. Use the Profile option to get diagnostics output of the load process. This will identify the point of failure and should guide you to a solution.
The most common cause of this error is trying to load a 64 bit DLL into a 32 bit process, or vice versa.
I tried all the things specified here and found yet another answer. I had to compile my application with 32-bit DLLs. I had built the libraries both in 32-bit and 64-bit but had my PATH set to 64-bit libraries. After I recompiled my application (with a number of changes in my code as well) I got this dreaded error and struggled for two days. Finally, after trying a number of other things, I changed my PATH to have the 32-bit DLLs before the 64-bit DLLs (they have the same names). And it worked. I am just adding it here for completeness.
It is a missing dll.
Possibly, your dll that works with com ports have an unresolved dll dependence.
You can use dependency walker and windows debugger. Check all of the mfc library, for example. Also, you can use nrCommlib - it is great components to work with com ports.
It has been mentioned in earlier answers that using dependency walker is the way to go, in my case (my application keeps failing with the error code), dependency walker showed a few dll that are NOT relevant!
Finally figured out that I can run profiling by going to "profile" menu and it will run the application and stop at the exact dll that's cause the problem! I found out a 32bit dll was picked because of path and fixed it.
I experienced the same problem developing a client-server app using Microsoft Visual Studio 2012.
If you used Visual Studio to develop the app, you must make sure the new (i.e. the computer that the software was not developed on) has the appropriate Microsoft Visual C++ Redistributable Package. By appropriate, you need the right year and bit version (i.e. x86 for 32 bit and x64 for 64 bit) of the Visual C++ Redistributable Package.
The Visual C++ Redistributable Packages install run-time components that are required to run C++ applications built using Visual Studio.
Here is a link to the Visual C++ Redistributable for Visual Studio 2015 .
You can check what versions are installed by going to Control Panel -> Programs -> Programs and Features.
Here's how I got this error and fixed it:
1) I developed a 32 bit application using Visual Studio 2012 on my computer.
Let's call my computer ComputerA.
2) I installed the .exe and the related files on a different computer we'll call ComputerB.
3) On ComputerB, I ran the .exe and got the error message.
4) On ComputerB, I looked at the Programs and Features and didn't see Visual C++ 2012 Redistributable (x64).
5) On ComputerB, I googled for Visual C++ 2012 Redistributable and selected and installed the x64 version.
6) On ComputerB, I ran the .exe on ComputerB and did not receive the error message.
I recently had an issue where I was developing an application (that used a serial port) and it worked on all the machines I tested it on but a few people were getting this error.
It turns out all the machines that the error happened on were running Win7 x64 and had NEVER ONCE been updated.
Running a Windows update fixed all of the machines in my particular case.
Actually this error indicates to an invalid image format. However, why this is happening and what the error code usually means? Actually this could be appear when you are trying to run a program that is made for or intended to work with a 64 bit Windows operating system, but your computer is running on 32 bit Operating system.
Possible Reasons:
Microsoft Visual C++
Need to restart
DirectX
.NET Framework
Need to Re-Install
Need to Run the application as an administrator
Source: http://www.solveinweb.com/solved-the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application/
This may be a case where debugging the debugger might be useful. Essentially if you follow the instructions here you can run two ide's and one will debug into the other. If you un your application in one, you can sometimes catch errors that you otherwise miss. Its worth a try.
I have seen the error trying to run VC++ debug executable on a machine which did not have Visual C++ installed. Building a release version and using that fixed it.
In my case the error occurred when I renamed a DLL after building it (using Visual Studio 2015), so that it fits the name expected by an executable, which depended on the DLL. After the renaming the list of exported symbols displayed by Dependency Walker was empty, and the said error message "The application was unable to start correctly" was displayed.
So it could be fixed by changing the output file name in the Visual Studio linker options.
You can have this if you are trying to manifest your application that it has a dependancy on the Microsoft.Windows.Common-Controls assembly. You do this when you want to load Version 6 of the common controls library - so that visual styles are applied to common controls.
You probably followed Microsoft's original documentation way back from Windows XP days, and added the following to your application's manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="X86"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Windows XP is no longer the OS, and you're no longer a 32-bit application. In the intervening 17 years Microsoft updated their documentation; now it's time for you to update your manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="*"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Raymond Chen has a lovely history of the Common Controls:
The history of the Windows XP common controls (archive)
The main problem, of course, is that a DLL file is missing, or, even more likely, corrupt. If this is the case, then I have some pretty good ideas (especially if you've downloaded and installed a DLL manually!)...
TLDR: Delete every manually copy/pasted DLL you've done, uninstall old redistributable installs, and reinstall new redistributables for both 32-bit and 64-bit installs.
What To Do
This solution of copying/pasting missing DLL's into system32, etc., used to work since I can remember in the 1990's, but it doesn't seem to work anymore (2020). So if you run into this problem recently, I suggest:
Within windows\system32 and windows\SysWOW64, delete all files that match ms*.dll, that the operating system will allow you delete as admin.
Uninstall all Visual C++ Redistributables that you have with Windows. This prevents the "You already have this!" dialogue showing up upon reinstall, as detailed in the next step when we re-install.
Reinstall the 2015-2019 Visual C++ Redistributable from a regularly available download site. If this does not work, download and install the others, but personally, the 2015-2019 covered everything for me. Regardless of your machine, install both x32 and x64 packages! (All Download Links: Collected VC++ Download Links; MSVCR120.dll Fix; MFC140U.dll Fix.)
How You Know It's Working
There's a lot of variation in coders experiencing this, so, the idea that there's one single, possible solution is often discarded, but let's be positive!
If deleting the matching ms*.dll files worked, then you will no longer get an error about error code 0xc000007b. Instead, you'll get a message about a missing .dll. This tells you that you're hitting the right code path!
If installing the redistributable works, then certain popular, DLL files should appear in the above-mentioned system32 and SysWO64 folders. For instance: MSVCR120.dll, MSVCR140.dll, MSVCR100.dll, MSVCP100.dll, MSVCP120.dll, MSVCP140.dll, and friends.
Last, Possible Best Chances
Sometimes things don't work according to plan (as we all in the Windows world know). You can also try the following!
Open the "Turn Windows Features on or off" tab in Windows (supported in Windows 8-10). Uncheck the .NET Framework installations. You'll see a small installation go by.
Restart the system. Go to the above feature again, recheck .NET Framework, and click "okay". If this works, you'll see a "installing and updating .NET framework" message that takes maybe a minute or so to go by. Once this is done, I recommend a reboot again.
Good luck!
Just solved this problem for my personal project (thanks to Dries for that). For me it was because the project path was too long. After saving the .sln to a shorter path (C:/MyProjects) and compiling from there it ran without the error.
Also download and unzip "Dependencies" into same folder where you put the wget.exe from
http://gnuwin32.sourceforge.net/packages/wget.htm
You will then have some lib*.dll files as well as wget.exe in the same folder and it should work fine.
(I also answered here https://superuser.com/a/873531/146668 which I originally found.)
I just ran into this issue. I searched for "C++" under my "Apps & Features" in Windows 10 control panel and noticed that some kind of update had just run a few days prior and installed VC++ Redistributable 2012-2017. The app that was running into the error message only required VC++ 2010. I uninstalled all of them and then reinstalled just 2010 x86/x64, and the error went away and the application functioned as expected.
That can happen if for some reason a x86 resource is loaded from a x64 machine. To avoid that explicitly, add this preprocessor directive to stdafx.h (of course, in my example the problematic resource is Windows Common Controls DLL.
#if defined(_WIN64)
#pragma comment(linker, "\"/manifestdependency:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='amd64' publicKeyToken='6595b64144ccf1df'\"")
#endif
It is possible that you have multiple versions of the dll(s) on your system. You can search your system to find out. The issue may be solved by simply changing the order of the directories in your path. This was my issue. (Cannot run Qt Creator GUI outside of Qt. "The application was unable to start correctly (0xc000007b)" error)
I ran into this issue when fetching code from my repository and compiling on a new machine. Copying over the entire repository and then compiling resulted in an executable which worked. Turns out a 32bit DLL accidentally wasn't checked in. As the people above state, use "Dependency Walker" to figure out where it goes wrong.
To make it more clear what to look for see the below screenshot, with in the background the exe trying to load the wrong DLL (notice the '64') resulting in "the application was unable to start correctly 0xc00007b" and in the foreground the exe which was simply copied over (which included the correct DLL).
I came here when I was searching for: "golang Windows (0xc00007b)"
I have an app written in Golang, which uses iconv. It worked on my machine, but not in someone else's machine.
The first error was the missing DLL: libiconv-2.dll, so I guess they downloaded it on the internet but it was the 32 bit and not 64 bit version, so the 0xc00007b error appeared.
I searched the DLL on my system but I did not have success until I searched on MinGW 64 path which in my case is: C:\msys64\mingw64\bin
The solution was to distribute the DLL with the .exe, which was in the MinGW folder.
I have a client/server app which I have been developing on a single PC. Now it needs two serial ports, so I borrowed a PC from a friend.
When I build my app and try to run or debug it (whether in the Delphi IDE or from Windows File manager), it errors "The application was unable to start correctly (0xc000007b)".
Googling doesn't bring up much, but seems to indicate that this is nothing Delphi specific and happens with other apps. It seems to be caused by calling into a 32 bit DLL from a 64 bit app or vice versa.
both PCs are Windows 7, 64 bit
both have Delphi Xe2 starter edition which can only handle 32 bits
The app runs fine on my PC, but not on my friend's
Other Delphi apps run just fine on both PCs
Can anyone give me a hint as to how to track this down?
Normally we get the 0xC000007B error-code (which means STATUS_INVALID_IMAGE_FORMAT), if:
If a 32-bit app tried to load a 64-bit DLL.
Or if a 64-bit app tried to load a 32-bit DLL.
Or if a 64-bit app tried to run on a 32-bit Windows.
To really know, I would suggest to test whether there is a problem between your application and its dependencies using dependency walker
Note that all you need to do is open your App using said tool, and issues appear as red log-entries at buttom of screen.
(At least, at time of writting, namely 2022)
Also, make sure you run the correct version of Dependency Walker, for example, the x86 version will display incorrect results when openning x64 binaries.
A load time dependency could not be resolved. The easiest way to debug this is to use Dependency Walker. Use the Profile option to get diagnostics output of the load process. This will identify the point of failure and should guide you to a solution.
The most common cause of this error is trying to load a 64 bit DLL into a 32 bit process, or vice versa.
I tried all the things specified here and found yet another answer. I had to compile my application with 32-bit DLLs. I had built the libraries both in 32-bit and 64-bit but had my PATH set to 64-bit libraries. After I recompiled my application (with a number of changes in my code as well) I got this dreaded error and struggled for two days. Finally, after trying a number of other things, I changed my PATH to have the 32-bit DLLs before the 64-bit DLLs (they have the same names). And it worked. I am just adding it here for completeness.
It is a missing dll.
Possibly, your dll that works with com ports have an unresolved dll dependence.
You can use dependency walker and windows debugger. Check all of the mfc library, for example. Also, you can use nrCommlib - it is great components to work with com ports.
It has been mentioned in earlier answers that using dependency walker is the way to go, in my case (my application keeps failing with the error code), dependency walker showed a few dll that are NOT relevant!
Finally figured out that I can run profiling by going to "profile" menu and it will run the application and stop at the exact dll that's cause the problem! I found out a 32bit dll was picked because of path and fixed it.
I experienced the same problem developing a client-server app using Microsoft Visual Studio 2012.
If you used Visual Studio to develop the app, you must make sure the new (i.e. the computer that the software was not developed on) has the appropriate Microsoft Visual C++ Redistributable Package. By appropriate, you need the right year and bit version (i.e. x86 for 32 bit and x64 for 64 bit) of the Visual C++ Redistributable Package.
The Visual C++ Redistributable Packages install run-time components that are required to run C++ applications built using Visual Studio.
Here is a link to the Visual C++ Redistributable for Visual Studio 2015 .
You can check what versions are installed by going to Control Panel -> Programs -> Programs and Features.
Here's how I got this error and fixed it:
1) I developed a 32 bit application using Visual Studio 2012 on my computer.
Let's call my computer ComputerA.
2) I installed the .exe and the related files on a different computer we'll call ComputerB.
3) On ComputerB, I ran the .exe and got the error message.
4) On ComputerB, I looked at the Programs and Features and didn't see Visual C++ 2012 Redistributable (x64).
5) On ComputerB, I googled for Visual C++ 2012 Redistributable and selected and installed the x64 version.
6) On ComputerB, I ran the .exe on ComputerB and did not receive the error message.
I recently had an issue where I was developing an application (that used a serial port) and it worked on all the machines I tested it on but a few people were getting this error.
It turns out all the machines that the error happened on were running Win7 x64 and had NEVER ONCE been updated.
Running a Windows update fixed all of the machines in my particular case.
Actually this error indicates to an invalid image format. However, why this is happening and what the error code usually means? Actually this could be appear when you are trying to run a program that is made for or intended to work with a 64 bit Windows operating system, but your computer is running on 32 bit Operating system.
Possible Reasons:
Microsoft Visual C++
Need to restart
DirectX
.NET Framework
Need to Re-Install
Need to Run the application as an administrator
Source: http://www.solveinweb.com/solved-the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application/
This may be a case where debugging the debugger might be useful. Essentially if you follow the instructions here you can run two ide's and one will debug into the other. If you un your application in one, you can sometimes catch errors that you otherwise miss. Its worth a try.
I have seen the error trying to run VC++ debug executable on a machine which did not have Visual C++ installed. Building a release version and using that fixed it.
In my case the error occurred when I renamed a DLL after building it (using Visual Studio 2015), so that it fits the name expected by an executable, which depended on the DLL. After the renaming the list of exported symbols displayed by Dependency Walker was empty, and the said error message "The application was unable to start correctly" was displayed.
So it could be fixed by changing the output file name in the Visual Studio linker options.
You can have this if you are trying to manifest your application that it has a dependancy on the Microsoft.Windows.Common-Controls assembly. You do this when you want to load Version 6 of the common controls library - so that visual styles are applied to common controls.
You probably followed Microsoft's original documentation way back from Windows XP days, and added the following to your application's manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="X86"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Windows XP is no longer the OS, and you're no longer a 32-bit application. In the intervening 17 years Microsoft updated their documentation; now it's time for you to update your manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="*"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Raymond Chen has a lovely history of the Common Controls:
The history of the Windows XP common controls (archive)
The main problem, of course, is that a DLL file is missing, or, even more likely, corrupt. If this is the case, then I have some pretty good ideas (especially if you've downloaded and installed a DLL manually!)...
TLDR: Delete every manually copy/pasted DLL you've done, uninstall old redistributable installs, and reinstall new redistributables for both 32-bit and 64-bit installs.
What To Do
This solution of copying/pasting missing DLL's into system32, etc., used to work since I can remember in the 1990's, but it doesn't seem to work anymore (2020). So if you run into this problem recently, I suggest:
Within windows\system32 and windows\SysWOW64, delete all files that match ms*.dll, that the operating system will allow you delete as admin.
Uninstall all Visual C++ Redistributables that you have with Windows. This prevents the "You already have this!" dialogue showing up upon reinstall, as detailed in the next step when we re-install.
Reinstall the 2015-2019 Visual C++ Redistributable from a regularly available download site. If this does not work, download and install the others, but personally, the 2015-2019 covered everything for me. Regardless of your machine, install both x32 and x64 packages! (All Download Links: Collected VC++ Download Links; MSVCR120.dll Fix; MFC140U.dll Fix.)
How You Know It's Working
There's a lot of variation in coders experiencing this, so, the idea that there's one single, possible solution is often discarded, but let's be positive!
If deleting the matching ms*.dll files worked, then you will no longer get an error about error code 0xc000007b. Instead, you'll get a message about a missing .dll. This tells you that you're hitting the right code path!
If installing the redistributable works, then certain popular, DLL files should appear in the above-mentioned system32 and SysWO64 folders. For instance: MSVCR120.dll, MSVCR140.dll, MSVCR100.dll, MSVCP100.dll, MSVCP120.dll, MSVCP140.dll, and friends.
Last, Possible Best Chances
Sometimes things don't work according to plan (as we all in the Windows world know). You can also try the following!
Open the "Turn Windows Features on or off" tab in Windows (supported in Windows 8-10). Uncheck the .NET Framework installations. You'll see a small installation go by.
Restart the system. Go to the above feature again, recheck .NET Framework, and click "okay". If this works, you'll see a "installing and updating .NET framework" message that takes maybe a minute or so to go by. Once this is done, I recommend a reboot again.
Good luck!
Just solved this problem for my personal project (thanks to Dries for that). For me it was because the project path was too long. After saving the .sln to a shorter path (C:/MyProjects) and compiling from there it ran without the error.
Also download and unzip "Dependencies" into same folder where you put the wget.exe from
http://gnuwin32.sourceforge.net/packages/wget.htm
You will then have some lib*.dll files as well as wget.exe in the same folder and it should work fine.
(I also answered here https://superuser.com/a/873531/146668 which I originally found.)
I just ran into this issue. I searched for "C++" under my "Apps & Features" in Windows 10 control panel and noticed that some kind of update had just run a few days prior and installed VC++ Redistributable 2012-2017. The app that was running into the error message only required VC++ 2010. I uninstalled all of them and then reinstalled just 2010 x86/x64, and the error went away and the application functioned as expected.
That can happen if for some reason a x86 resource is loaded from a x64 machine. To avoid that explicitly, add this preprocessor directive to stdafx.h (of course, in my example the problematic resource is Windows Common Controls DLL.
#if defined(_WIN64)
#pragma comment(linker, "\"/manifestdependency:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='amd64' publicKeyToken='6595b64144ccf1df'\"")
#endif
It is possible that you have multiple versions of the dll(s) on your system. You can search your system to find out. The issue may be solved by simply changing the order of the directories in your path. This was my issue. (Cannot run Qt Creator GUI outside of Qt. "The application was unable to start correctly (0xc000007b)" error)
I ran into this issue when fetching code from my repository and compiling on a new machine. Copying over the entire repository and then compiling resulted in an executable which worked. Turns out a 32bit DLL accidentally wasn't checked in. As the people above state, use "Dependency Walker" to figure out where it goes wrong.
To make it more clear what to look for see the below screenshot, with in the background the exe trying to load the wrong DLL (notice the '64') resulting in "the application was unable to start correctly 0xc00007b" and in the foreground the exe which was simply copied over (which included the correct DLL).
I came here when I was searching for: "golang Windows (0xc00007b)"
I have an app written in Golang, which uses iconv. It worked on my machine, but not in someone else's machine.
The first error was the missing DLL: libiconv-2.dll, so I guess they downloaded it on the internet but it was the 32 bit and not 64 bit version, so the 0xc00007b error appeared.
I searched the DLL on my system but I did not have success until I searched on MinGW 64 path which in my case is: C:\msys64\mingw64\bin
The solution was to distribute the DLL with the .exe, which was in the MinGW folder.
I have a client/server app which I have been developing on a single PC. Now it needs two serial ports, so I borrowed a PC from a friend.
When I build my app and try to run or debug it (whether in the Delphi IDE or from Windows File manager), it errors "The application was unable to start correctly (0xc000007b)".
Googling doesn't bring up much, but seems to indicate that this is nothing Delphi specific and happens with other apps. It seems to be caused by calling into a 32 bit DLL from a 64 bit app or vice versa.
both PCs are Windows 7, 64 bit
both have Delphi Xe2 starter edition which can only handle 32 bits
The app runs fine on my PC, but not on my friend's
Other Delphi apps run just fine on both PCs
Can anyone give me a hint as to how to track this down?
Normally we get the 0xC000007B error-code (which means STATUS_INVALID_IMAGE_FORMAT), if:
If a 32-bit app tried to load a 64-bit DLL.
Or if a 64-bit app tried to load a 32-bit DLL.
Or if a 64-bit app tried to run on a 32-bit Windows.
To really know, I would suggest to test whether there is a problem between your application and its dependencies using dependency walker
Note that all you need to do is open your App using said tool, and issues appear as red log-entries at buttom of screen.
(At least, at time of writting, namely 2022)
Also, make sure you run the correct version of Dependency Walker, for example, the x86 version will display incorrect results when openning x64 binaries.
A load time dependency could not be resolved. The easiest way to debug this is to use Dependency Walker. Use the Profile option to get diagnostics output of the load process. This will identify the point of failure and should guide you to a solution.
The most common cause of this error is trying to load a 64 bit DLL into a 32 bit process, or vice versa.
I tried all the things specified here and found yet another answer. I had to compile my application with 32-bit DLLs. I had built the libraries both in 32-bit and 64-bit but had my PATH set to 64-bit libraries. After I recompiled my application (with a number of changes in my code as well) I got this dreaded error and struggled for two days. Finally, after trying a number of other things, I changed my PATH to have the 32-bit DLLs before the 64-bit DLLs (they have the same names). And it worked. I am just adding it here for completeness.
It is a missing dll.
Possibly, your dll that works with com ports have an unresolved dll dependence.
You can use dependency walker and windows debugger. Check all of the mfc library, for example. Also, you can use nrCommlib - it is great components to work with com ports.
It has been mentioned in earlier answers that using dependency walker is the way to go, in my case (my application keeps failing with the error code), dependency walker showed a few dll that are NOT relevant!
Finally figured out that I can run profiling by going to "profile" menu and it will run the application and stop at the exact dll that's cause the problem! I found out a 32bit dll was picked because of path and fixed it.
I experienced the same problem developing a client-server app using Microsoft Visual Studio 2012.
If you used Visual Studio to develop the app, you must make sure the new (i.e. the computer that the software was not developed on) has the appropriate Microsoft Visual C++ Redistributable Package. By appropriate, you need the right year and bit version (i.e. x86 for 32 bit and x64 for 64 bit) of the Visual C++ Redistributable Package.
The Visual C++ Redistributable Packages install run-time components that are required to run C++ applications built using Visual Studio.
Here is a link to the Visual C++ Redistributable for Visual Studio 2015 .
You can check what versions are installed by going to Control Panel -> Programs -> Programs and Features.
Here's how I got this error and fixed it:
1) I developed a 32 bit application using Visual Studio 2012 on my computer.
Let's call my computer ComputerA.
2) I installed the .exe and the related files on a different computer we'll call ComputerB.
3) On ComputerB, I ran the .exe and got the error message.
4) On ComputerB, I looked at the Programs and Features and didn't see Visual C++ 2012 Redistributable (x64).
5) On ComputerB, I googled for Visual C++ 2012 Redistributable and selected and installed the x64 version.
6) On ComputerB, I ran the .exe on ComputerB and did not receive the error message.
I recently had an issue where I was developing an application (that used a serial port) and it worked on all the machines I tested it on but a few people were getting this error.
It turns out all the machines that the error happened on were running Win7 x64 and had NEVER ONCE been updated.
Running a Windows update fixed all of the machines in my particular case.
Actually this error indicates to an invalid image format. However, why this is happening and what the error code usually means? Actually this could be appear when you are trying to run a program that is made for or intended to work with a 64 bit Windows operating system, but your computer is running on 32 bit Operating system.
Possible Reasons:
Microsoft Visual C++
Need to restart
DirectX
.NET Framework
Need to Re-Install
Need to Run the application as an administrator
Source: http://www.solveinweb.com/solved-the-application-was-unable-to-start-correctly-0xc000007b-click-ok-to-close-the-application/
This may be a case where debugging the debugger might be useful. Essentially if you follow the instructions here you can run two ide's and one will debug into the other. If you un your application in one, you can sometimes catch errors that you otherwise miss. Its worth a try.
I have seen the error trying to run VC++ debug executable on a machine which did not have Visual C++ installed. Building a release version and using that fixed it.
In my case the error occurred when I renamed a DLL after building it (using Visual Studio 2015), so that it fits the name expected by an executable, which depended on the DLL. After the renaming the list of exported symbols displayed by Dependency Walker was empty, and the said error message "The application was unable to start correctly" was displayed.
So it could be fixed by changing the output file name in the Visual Studio linker options.
You can have this if you are trying to manifest your application that it has a dependancy on the Microsoft.Windows.Common-Controls assembly. You do this when you want to load Version 6 of the common controls library - so that visual styles are applied to common controls.
You probably followed Microsoft's original documentation way back from Windows XP days, and added the following to your application's manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="X86"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Windows XP is no longer the OS, and you're no longer a 32-bit application. In the intervening 17 years Microsoft updated their documentation; now it's time for you to update your manifest:
<!-- Dependancy on Common Controls version 6 -->
<dependency>
<dependentAssembly>
<assemblyIdentity
type="win32"
name="Microsoft.Windows.Common-Controls"
version="6.0.0.0"
processorArchitecture="*"
publicKeyToken="6595b64144ccf1df"
language="*"/>
</dependentAssembly>
</dependency>
Raymond Chen has a lovely history of the Common Controls:
The history of the Windows XP common controls (archive)
The main problem, of course, is that a DLL file is missing, or, even more likely, corrupt. If this is the case, then I have some pretty good ideas (especially if you've downloaded and installed a DLL manually!)...
TLDR: Delete every manually copy/pasted DLL you've done, uninstall old redistributable installs, and reinstall new redistributables for both 32-bit and 64-bit installs.
What To Do
This solution of copying/pasting missing DLL's into system32, etc., used to work since I can remember in the 1990's, but it doesn't seem to work anymore (2020). So if you run into this problem recently, I suggest:
Within windows\system32 and windows\SysWOW64, delete all files that match ms*.dll, that the operating system will allow you delete as admin.
Uninstall all Visual C++ Redistributables that you have with Windows. This prevents the "You already have this!" dialogue showing up upon reinstall, as detailed in the next step when we re-install.
Reinstall the 2015-2019 Visual C++ Redistributable from a regularly available download site. If this does not work, download and install the others, but personally, the 2015-2019 covered everything for me. Regardless of your machine, install both x32 and x64 packages! (All Download Links: Collected VC++ Download Links; MSVCR120.dll Fix; MFC140U.dll Fix.)
How You Know It's Working
There's a lot of variation in coders experiencing this, so, the idea that there's one single, possible solution is often discarded, but let's be positive!
If deleting the matching ms*.dll files worked, then you will no longer get an error about error code 0xc000007b. Instead, you'll get a message about a missing .dll. This tells you that you're hitting the right code path!
If installing the redistributable works, then certain popular, DLL files should appear in the above-mentioned system32 and SysWO64 folders. For instance: MSVCR120.dll, MSVCR140.dll, MSVCR100.dll, MSVCP100.dll, MSVCP120.dll, MSVCP140.dll, and friends.
Last, Possible Best Chances
Sometimes things don't work according to plan (as we all in the Windows world know). You can also try the following!
Open the "Turn Windows Features on or off" tab in Windows (supported in Windows 8-10). Uncheck the .NET Framework installations. You'll see a small installation go by.
Restart the system. Go to the above feature again, recheck .NET Framework, and click "okay". If this works, you'll see a "installing and updating .NET framework" message that takes maybe a minute or so to go by. Once this is done, I recommend a reboot again.
Good luck!
Just solved this problem for my personal project (thanks to Dries for that). For me it was because the project path was too long. After saving the .sln to a shorter path (C:/MyProjects) and compiling from there it ran without the error.
Also download and unzip "Dependencies" into same folder where you put the wget.exe from
http://gnuwin32.sourceforge.net/packages/wget.htm
You will then have some lib*.dll files as well as wget.exe in the same folder and it should work fine.
(I also answered here https://superuser.com/a/873531/146668 which I originally found.)
I just ran into this issue. I searched for "C++" under my "Apps & Features" in Windows 10 control panel and noticed that some kind of update had just run a few days prior and installed VC++ Redistributable 2012-2017. The app that was running into the error message only required VC++ 2010. I uninstalled all of them and then reinstalled just 2010 x86/x64, and the error went away and the application functioned as expected.
That can happen if for some reason a x86 resource is loaded from a x64 machine. To avoid that explicitly, add this preprocessor directive to stdafx.h (of course, in my example the problematic resource is Windows Common Controls DLL.
#if defined(_WIN64)
#pragma comment(linker, "\"/manifestdependency:type='win32' name='Microsoft.Windows.Common-Controls' version='6.0.0.0' processorArchitecture='amd64' publicKeyToken='6595b64144ccf1df'\"")
#endif
It is possible that you have multiple versions of the dll(s) on your system. You can search your system to find out. The issue may be solved by simply changing the order of the directories in your path. This was my issue. (Cannot run Qt Creator GUI outside of Qt. "The application was unable to start correctly (0xc000007b)" error)
I ran into this issue when fetching code from my repository and compiling on a new machine. Copying over the entire repository and then compiling resulted in an executable which worked. Turns out a 32bit DLL accidentally wasn't checked in. As the people above state, use "Dependency Walker" to figure out where it goes wrong.
To make it more clear what to look for see the below screenshot, with in the background the exe trying to load the wrong DLL (notice the '64') resulting in "the application was unable to start correctly 0xc00007b" and in the foreground the exe which was simply copied over (which included the correct DLL).
I came here when I was searching for: "golang Windows (0xc00007b)"
I have an app written in Golang, which uses iconv. It worked on my machine, but not in someone else's machine.
The first error was the missing DLL: libiconv-2.dll, so I guess they downloaded it on the internet but it was the 32 bit and not 64 bit version, so the 0xc00007b error appeared.
I searched the DLL on my system but I did not have success until I searched on MinGW 64 path which in my case is: C:\msys64\mingw64\bin
The solution was to distribute the DLL with the .exe, which was in the MinGW folder.
Is it possible that I need to install both a vcredist for vs2012 AND for vs2010?
I just had an error where my app couldn't load a .dll and it suddenly started working after I did an unrelated installation, which prompted me to guess that it must have installed an older vcredist which fixed the issue.
However I'm sure I'm using c++11 features.
Deployment is a job on its own. And I hate it, I hate the way you have to write installations on Windows. …So that feel better now…
You only need one vcredist. The one the linker decided to link your program to. If you have the "Windows SDK's" installed you will find the actual redist in:
C:\Program Files\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\vcredist_x86
If you install all updates including the not important ones, Microsoft will update your redist in that folder!
Maybe you have an executable, which do not want to run, you need the dependency walker. A tool, so usefully that Microsoft had to remove it from the Visual Studio. Download the program and open your exe in it. You do not need to understand what really happen. As long as no Dialog comes up during opening, everything is okay, even if there are exclamation marks in the bottom window. If a Dialog comes up with something like "Could not resolve" than look in the bottom window. Usually there is now in the lower window something like
"msvcr.dll" or "msvcr100.dll" or "msvcr110.dll".
If it includes an "d" before the extension like "msvcr100d.dll" the executable was compiled in debug mode and your journey ends on a system without installed compiler. If not, the name is telling you which vcredist you need:
msvcr100 = VS 2010 redist (32bit) (64bit)
msvcr110 = VS 2012 redist (32/64bit?)
sometimes it is not msvcr but it always starts with "ms". Of course the program will tell you every dll which is missing, not only microsofts and which command in the dll is used. This is sometimes extremely useful.
You have to do that with every dll in the folder of your executable as they can also have unresolveable dependencies.
Back to your first question. Your program can only link to msvcr100 or msvcr110, not to both, that is the reason you only need one vcredist per executable.
As mentioned in a commentary, A third party DLL can be guilty of using a different msvcp version. So yeah, you have to search all DLL's you use and you have to install both vcredist some times.
PS: There are always at least two of them, msvcr and msvcp.
I solved this problem as follows (on Windows 7):
I tried to load the library and it failed showing "The application failed to start because its side by side information is incorrect."
I opened "Computer management" window: Start -> right click on Computer->Manage.
In the "Computer management" window I selected "Event Viewer"->"Windows logs"->"Application".
The log corresponding to the error said that a DLL for a certain version of Microsoft.VC90.CRT was not found. In my case the version was 9.0.30729.6161 and the search for it in Google revealed I needed to install an "unusual" version of redistributables from here.
The dependency walker did not help for me (it only confused me by reporting unnecessary dependencies).
If you want to know which runtimes are needed, you can try using the "Dependencies" tool from lucasg on github (https://github.com/lucasg/Dependencies) which works on modern systems like win10.
You'll just have to look for MsVcR##.dll o VcRuntime###.dll (where # stands for a digit) in the dependency tree..
HTH
PS: The old-and-faithful "dependency walker" we've been using for years seems to be unable to handle the way newer OS handle delayed dependencies, marking them as "missing", while they are not missing, just delay loaded in a way it doesn't know...
If your OS is Vista or later (not XP), use the built-in SxStrace.exe to generate a log of which DLL's are being loaded and what module requires them. It will clearly show you if multiple CRT DLL versions are being loaded, and for what DLL's (3rd party or no).
The VS2012 redistributable is put into, e.g. "C:\Program Files (x86)\Microsoft Visual Studio 11.0\VC\redist".
-- David
I installed XP on a virtual machine, updated it to SP3 and then tested a small program compiled with Visual C++ 2008 on my real computer - however it didn't start but outputted only an error saying that a problem had been detected and that a reinstall of the application (mine is 10KB in size and doesn't even have an installation) could fix the problem.
What is required to run programs compiled with MSVC 9?
Can I just include some dlls for it to work everywhere?
Either link statially against the runtime library (select multithreaded instead of multithreaded-dll) or follow tommieb75's advice and install the MSVC9 runtime redistributable (copying to system32 or to the application's folder works as well, but is not the way to go, afaik). For small applications with no need for an installer, I'd prefer the first option. Deploying runtime installers is annoying.
You could be missing the MCVC9 runtime library, try copying that over to the Windows System32 folder...
It may depend against which DLLs your project is linked. Inspect the assemblies manifest and check if those DLLs are installed on your VM.
What does your program contains? Dependencies on dynamic C/C++ runtime? Then you need to either include the C++ redistributable runtime DLLs in your app, or change the program to use the static C++ runtime. Similarly, do you use ATL? MFC? Custom 3rd party libraries? They all add dependencies to your executable and Win32 will refuse to load your application.
One easy step is to check with Dependency Walker what dependencies your application has.
It could be a dll you application links against. The depends tool is a must have in every programmers toolbox for debugging dll dependency issues.
If you have the commercial rather than express msvc edition, what you really should do is copy the msvcmon redist components to your VM, run the remote debug monitor there, and attach to it from your desktop dev environment. This page explains the basic principal. Because it sounds like your app is causing an exception on XP.
If you can't remote debug and if dependency checker does not indicate a dll issue, then you could look in the systems application event log to see if there is any more information there. Or try install Dr Watson as a post mortem debugger. Open a command prompt and enter
drwtsn32 -i
to install Dr Watson as the post mortem debugger, and
drwtsn32
to get a config screen allowing you to browse for the location of crash dumps. You can load crash dump files directly with Dev Studio 2005 and later. (I don't think Dr Watson ships with Vista and Windows 7 anymore).