I have a table ORDERS which contains column ORDER_DATE. I have created a Chart as a Bar type. I want the chart to show the amount of orders in a given date or range.
I'm following this Youtube tutorial which shows how to create a datepicker that returns a range in a Report. I'm trying to replicate this in a chart.
What I've done so far
Created datepicker items P5_DATE_FROM and P5_DATE_TO
Changed the Series Source Type to SQL Query
select ORDER_ID,
ORDER_NUMBER,
TO_CHAR(ORDER_DATE, 'YYYY-MM-DD') AS ORDERDATE,
STORE_ID,
FULL_NAME,
EMAIL,
CITY,
STATE,
ZIP_CODE,
CREDIT_CARD,
ORDER_ITEMS,
APEX$SYNC_STEP_STATIC_ID,
APEX$ROW_SYNC_TIMESTAMP
from ORDERS_LOCAL
where TO_CHAR(ORDER_DATE, 'YYYY-MM-DD') between :P5_DATE_FROM and :P5_DATE_TO
Source Page Items to Submit added P5_DATE_FROM,P5_DATE_TO
I basically followed the exact steps of the video. However, since the video is for a report and mine is for a chart, the chart isn't actually returning any data.
I think this is because for charts there are additional fields I need to configure. I noticed the video didn't cover Column Mapping and I'm a bit confused to what to enter here.
----------------UPDATE-------------
I've followed Koen's instructions from his answer. It seems like to TO_CHAR function was causing the error. I've updated the SQL Query to below:
select ORDER_ID,
ORDER_NUMBER,
ORDER_DATE,
STORE_ID,
FULL_NAME,
EMAIL,
CITY,
STATE,
ZIP_CODE,
CREDIT_CARD,
ORDER_ITEMS,
APEX$SYNC_STEP_STATIC_ID,
APEX$ROW_SYNC_TIMESTAMP
from ORDERS_LOCAL
where ORDER_DATE between TO_DATE(:P5_DATE_FROM,'YYYY-MM-DD') and TO_DATE(:P5_DATE_TO,'YYYY-MM-DD')
However, on the Page Designer I cannot save and run page until I select Column Mapping - Label and Value. I've set the Label as ORDER_DATE but I am unsure of what to select for the Value.
Setting the Value to ORDER_DATE shows an error Ajax call returned server error ORA-01403: no data found for CHART Count Orders by Date.
and selecting any other Value such as ORDER_NUMBER or ZIP_CODE populates the chart with the actual integer value of the column (ex: ZIP_CODE returns a chart of x-axis: date, y-axis: actual zip code numbers)
I see 2 possible issues.
You submit P5_DATE_FROM and P5_DATE_TO but the source has P1_DATE_FROM and P1_DATE_TO - not sure that is a typo but it should all be the same...
The where clause is wrong. This
from ORDERS_LOCAL
where TO_CHAR(ORDER_DATE, 'MM-DD-YYYY') between :P1_DATE_FROM and :P1_DATE_TO
should be
from ORDERS_LOCAL
where ORDER_DATE between TO_DATE(:P1_DATE_FROM,'MM-DD-YYYY') and TO_DATE(:P1_DATE_TO,'MM-DD-YYYY')
Reason: the column orders_local.order_date is of datatype DATE. If you convert it to a string using TO_CHAR then it will be a string comparison, not a date comparison.
Note that bind variables P1_DATE_FROM and P1_DATE_TO are strings - they're defined in the DOM on the html page and that has no concept of oracle datatypes so everything is just a string. If they're used as such in a date comparison, you're relying on implicit conversion by the database. It's safer to do explicit conversion using the TO_DATE function.
--UPDATE--
Your question starts with "I want the chart to show the amount of orders in a given date or range.". Well... there is your answer. The "Value" is the amount of orders on each day. Update your source query to include a count of the orders and group by day. Then make your value attribute the column that has the count.
Related
I have a table ORDERS which contains column ORDER_DATE. I have created a Chart as a Bar type.
Right now, the chart returns all the orders because I did not specify a Maximum Rows. The date on the x-axis and the number of orders on the y-axis.
How can I add a form for the user to select a range of dates and return only the values for those dates?
Example:
Doesn't necessarily have to be a calendar. A dropdown is fine as well. Or even a 'text' input since that is the easiest way.. I just need to know how to go about creating this feature. Your help is appreciated. Thank you.
First create a page item as date picker or some other plugin you already have to let users select a date or date range. (make sure that when user selects a date, the page item value is set by using a dynamic action or by a setting that your plugin has (set item value after selection kind of setting) )
Then create a new view with the source of your ORDERS table but it should have a where statement as it filters records by your page item such as:
select count(1)
from ORDERS
where order_date between :P1_DATE_FROM and :P1_DATE_TO
Set the source of the chart to this new view.
After user sets a value, refresh the chart by a dynamic action if it is not refreshed automatically.
In summary, the idea is to make your chart's source filtered by page items that users can change. Then refreshing the chart so that the new page item values are effective.
This question is a follow up to another SO question
I want a bar chart to show the amount of orders in a given date or range. Koen's updated answer shows:
'The "Value" is the amount of orders on each day. Update your source query to include a count of the orders and group by day. Then make your value attribute the column that has the count.'
How would I go about doing this?
Summary: I have a table ORDERS which contains column ORDER_DATE. I have created a Chart as a Bar type. I want the chart to show the amount of orders in a given date or range.
I'm following this Youtube tutorial which shows how to create a datepicker that returns a range in a Report. I'm trying to replicate this in a chart.
What I've done so far
Created datepicker items P5_DATE_FROM and P5_DATE_TO
Changed the Series Source Type to SQL Query
select ORDER_ID,
ORDER_NUMBER,
ORDER_DATE,
STORE_ID,
FULL_NAME,
EMAIL,
CITY,
STATE,
ZIP_CODE,
CREDIT_CARD,
ORDER_ITEMS,
APEX$SYNC_STEP_STATIC_ID,
APEX$ROW_SYNC_TIMESTAMP
from ORDERS_LOCAL
where ORDER_DATE between TO_DATE(:P5_DATE_FROM,'YYYY-MM-DD') and TO_DATE(:P5_DATE_TO,'YYYY-MM-DD')
Source Page Items to Submit added P5_DATE_FROM,P5_DATE_TO
I basically followed the exact steps of the video.
However, on the Page Designer I cannot save and run page until I select Column Mapping - Label and Value. I've set the Label as ORDER_DATE but I am unsure of what to select for the Value.
Setting the Value to ORDER_DATE shows an error Ajax call returned server error ORA-01403: no data found for CHART Count Orders by Date.
and selecting any other Value such as ORDER_NUMBER or ZIP_CODE populates the chart with the actual integer value of the column (ex: ZIP_CODE returns a chart of x-axis: date, y-axis: actual zip code numbers)
-----------UPDATE----------
Per Koen's answer, I've updated the Source SQL Query to below but I am now receiving an error.
And if I copy the exact query that Koen suggested, I run into below:
I did some messing around and found if I include APEX$SYNC_STEP_STATIC_ID and APEX$ROW_SYNC_TIMESTAMP the missing expression error goes away but instead I receive the GROUP BY error.
Something like this (untested) should work. Use TRUNC to ensure all orders on the same date are grouped (since date has a time portion, you'd have a different column for each different date time. Use ORDER_DATE as label and ORDER_COUNT as value.
select COUNT(ORDER_ID) AS ORDER_COUNT,
TRUNC(ORDER_DATE) AS ORDER_DATE,
from ORDERS_LOCAL
where ORDER_DATE between TO_DATE(:P5_DATE_FROM,'YYYY-MM-DD') and TO_DATE(:P5_DATE_TO,'YYYY-MM-DD')
GROUP BY TRUNC(ORDER_DATE)
I have a Microsoft List with a column named "Status" which is a column type with multiples choices.
I want the user to have today's date when he chose a certain choice from the column "Status".
For instance, when the status is "completed", then the column "Date of completion" shall display automatically today's date.
What would be the formula, and should it be entered in the column "Date of completion" parameter > column validation in the field "formula" ?
Or do I need to use power automate ?
Thanks for your help,
I would use column formatting for this.. I would use Power Automate for this.
Create a flow like below.
Use the When an item is created or modified trigger action.
In the Settings add a trigger expression like below (again change it to use the internal column names).
That expression checks if the Status field value is Completed and if the Date of Completion field is still empty.
#and(equals(triggerOutputs()?['body/Status/Value'], 'Completed'), empty(triggerOutputs()?['body/Dateofcompletion']))
In the Update Item use UtcNow for the Date of Completion field
utcNow()
I'm trying to obtain the MAX of a particular column in a Power BI Report and place this as a new Measure within each ROW of the same dataset. Please see the example below.
Is this possible in DAX and via DirectQuery/LiveConnection? The report is pointing to a tabular model but due to outside factors the measure must be created in the report.
Thanks
You can accomplish this a few ways. Essentially, you need override the filter context so that the MAX function isn't just running over whatever slice you're showing in the visual. Using CALCULATE or the iterator function MAXX, set the wrap the table in the ALL() function to override the context and calculate max over all rows.
= CALCULATE(MAX([Calendar`Year]), ALL('Smithfield_Fiscal_Calendar'))
or
= MAXX(ALL('Smithfield_Fiscal_Calendar'), [Calendar`Year])
To get the breakout by date, you'll need to include a Date table in your model. PowerBI makes this possible with a few different DAX options. As an example, go to your Model tab, click 'New Table' and put in the following expression:
MyCalendar = CALENDAR(DATE(2019,1,1), DATE (2019,1,10))
This is a little trivial -- you'd want to use a useful range of dates but this one matches your example above. Next, add a column to [MyCalendar]
CalendarMonthYear = month([date]) & "-" & year([date])
Go to your budget table and add a similar field
BudgetMonthYear = month([date]) & "-" & year([date])
Go into your Model view and create a relationship between CalendarMonthYear and BudgetMonthYear. This will associate every date in the date table with the particular budget row from your budget table.
Hope it helps.
I have a date field and a interactive grid. I am trying to generate the Interactive grid based on the value inputted in the date field.
I am trying to write the query as below :
select pap.effective_start_date , pap.effective_end_date
from per_all_people_f pap
where :SELECT_DATE between pap.effective_start_date and
pap.effective_end_date
Here, SELECT_DATE is the name of the Date field (datatype Date picker). I am writing a dynamic action on Change of Date field, and refreshing the interactive grid region.
But when I change the value in Date field, it doesn't return any rows.
I have done a similar change where my interactive grid was based on a dropdown. There I had to set the "page action on selection" to Submit, and it worked. But here, since it is a Date field, the "Page Action on selection" property doesn't appear on the page .
Can somebody please suggest, how can I achieve this.
You need to explicitly convert your bind variables, which are treated as strings, to dates.
to_date(:SELECT_DATE)
The format mask will come from the application properties, or you can be explicit with that, too.