I tried to install and start the Tomcat on my AWS EC2 instance.
However, I failed to run tomcat server after installed it.
I followed the following article for that
https://blog.devops4me.com/aws-tutorial-how-to-install-tomcat-in-aws-ec2-install/
And after finished step 6, and reloaded tomcat server, I tried to restart tomcat service like step 7. However, my terminal showed as below:
Feb 14 20:17:07 ip-172-31-54-104.ec2.internal systemd[1]: tomcat.service: control process exited, code=exited status=203
Feb 14 20:17:07 ip-172-31-54-104.ec2.internal systemd[1]: Failed to start Tomcat Server.
Feb 14 20:17:07 ip-172-31-54-104.ec2.internal systemd[1]: Unit tomcat.service entered failed state.
Feb 14 20:17:07 ip-172-31-54-104.ec2.internal systemd[1]: tomcat.service failed.
Feb 14 20:17:10 ip-172-31-54-104.ec2.internal systemd[1]: [/etc/systemd/system/tomcat.service:22] Missing '='.
Feb 14 20:17:22 ip-172-31-54-104.ec2.internal systemd[1]: tomcat.service holdoff time over, scheduling restart.
Feb 14 20:17:22 ip-172-31-54-104.ec2.internal systemd[1]: tomcat.service failed to schedule restart job: Unit is not loaded properly: Bad message.
Feb 14 20:17:22 ip-172-31-54-104.ec2.internal systemd[1]: Unit tomcat.service entered failed state.
Feb 14 20:17:22 ip-172-31-54-104.ec2.internal systemd[1]: tomcat.service failed.
I don't really understand how this work, and tried to search error on internet, but still doesn't have any clue of how to solve this problem, if anyone can give me a hint, that would be great, thank you!
Related
so this is the problem I have installed open jdk 8 for jenkins. jenkins is insalled and running given
● jenkins.service - LSB: Start Jenkins at boot time
Loaded: loaded (/etc/init.d/jenkins; generated)
Active: active (exited) since Thu 2021-10-21 19:22:55 UTC; 20min ago
Docs: man:systemd-sysv-generator(8)
Process: 437 ExecStart=/etc/init.d/jenkins start (code=exited, status=0/SUCCESS)
Oct 21 19:22:52 ip-172-31-30-187 systemd[1]: Starting LSB: Start Jenkins at boot time...
Oct 21 19:22:53 ip-172-31-30-187 jenkins[437]: Correct java version found
Oct 21 19:22:53 ip-172-31-30-187 jenkins[437]: * Starting Jenkins Automation Server jenkins
Oct 21 19:22:54 ip-172-31-30-187 su[619]: (to jenkins) root on none
Oct 21 19:22:54 ip-172-31-30-187 su[619]: pam_unix(su-l:session): session opened for user jenkins by (u>
Oct 21 19:22:54 ip-172-31-30-187 su[619]: pam_unix(su-l:session): session closed for user jenkins
Oct 21 19:22:55 ip-172-31-30-187 jenkins[437]: ...done.
Oct 21 19:22:55 ip-172-31-30-187 systemd[1]: Started LSB: Start Jenkins at boot time.
however, using serverip:8080 brings up nothing
used this tutorial https://www.youtube.com/watch?v=B6K1IF-489M&t=36s
port 8080 is also added to security group
this problem was not solved but making a fresh ec2 instance and installing Jenkins by following that tutorial did the trick
I am using centos 7.
How did I check the log.
journalctl -xe
What I got from the log.(I saw the same log every 10 seconds.)
Oct 02 10:19:51 lp01.localdomain systemd[1]: zabbix-agent.service holdoff time over, scheduling restart.
Oct 02 10:19:51 lp01.localdomain systemd[1]: Starting Zabbix Agent...
-- Subject: Unit zabbix-agent.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit zabbix-agent.service has begun starting up.
Oct 02 10:19:51 lp01.localdomain zabbix_agentd[8985]: zabbix_agentd [8987]: cannot open "/var/log/zabbix/zabbix_agentd.log": [13] Permission denied
Oct 02 10:19:51 lp01.localdomain systemd[1]: PID file /run/zabbix/zabbix_agentd.pid not readable (yet?) after start.
Oct 02 10:19:51 lp01.localdomain systemd[1]: zabbix-agent.service never wrote its PID file. Failing.
Oct 02 10:19:51 lp01.localdomain systemd[1]: Failed to start Zabbix Agent.
-- Subject: Unit zabbix-agent.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit zabbix-agent.service has failed.
--
-- The result is failed.
Oct 02 10:19:51 lp01.localdomain systemd[1]: Unit zabbix-agent.service entered failed state.
Oct 02 10:19:51 lp01.localdomain systemd[1]: zabbix-agent.service failed.
So I checked "/var/log/zabbix/zabbix_agentd.log" file first.
ll /var/log/zabbix/zabbix_agentd.log
But it said No such file or directory.
ls: cannot access /var/log/zabbix/zabbix_agentd.log: No such file or directory
and then I checked "/run/zabbix/zabbix_agentd.pid" file.
ll /run/zabbix/zabbix_agentd.pid
It also said No such file or directory.
ls: cannot access /run/zabbix/zabbix_agentd.pid: No such file or directory
You have new mail in /var/spool/mail/root
I checked if Selinux is running.
getenforce
and it said Selinux is Disabled..
My questions are
How can I start zabbix?
If I can't start zabbix, can I stop zabbix from starting-failing every 10 seconds?
Thank you.
add permission to the directory - /var/log/zabbix/ & /var/log/zabbix-agent/
chmod 707 /var/log/zabbix/
chmod 707 /var/log/zabbix-agent/
or
change owner of the directory?
chown zabbix:zabbix /var/log/zabbix/
chown zabbix:zabbix /var/log/zabbix-agent/
And then, would stop service zabbix?
systemctl stop zabbix-agent
I'm trying to follow this tutorial but keep getting an error when I try to install RStudio on the main cluster. (see section Installing RStudio Server..., item 3).
When I run the line
$ sudo gdebi rstudio-server-1.2.1335-amd64.deb
The installation starts but then fails with
Jun 03 03:10:16 cluster-c141-m systemd[1]: Starting RStudio Server...
Jun 03 03:10:16 cluster-c141-m rserver[20313]: /usr/lib/rstudio-server/bin/rserver: error while loading shar…ectory
Jun 03 03:10:16 cluster-c141-m systemd[1]: rstudio-server.service: Control process exited, code=exited status=127
Jun 03 03:10:16 cluster-c141-m systemd[1]: Failed to start RStudio Server.
Jun 03 03:10:16 cluster-c141-m systemd[1]: rstudio-server.service: Unit entered failed state.
Jun 03 03:10:16 cluster-c141-m systemd[1]: rstudio-server.service: Failed with result 'exit-code'.
Thanks for any suggestions.
You are installing the rstudio-server for Debian 8. Install the Debian 9 version.
The tutorial could use an update.
There is an initialization action to take care of installation of rstudio (in case you want to create another cluster later): https://github.com/GoogleCloudPlatform/dataproc-initialization-actions/tree/master/rstudio
I've been working on systemctl for a while and it's just not working.
I have tested with gunicorn and it works perfectly, but when I'm doing this
systemctl daemon-reload
systemctl enable flaskapp
systemctl start flaskapp
However, I've been getting issues like this
Dec 2 16:17:15 localhost systemd[1]: Started flaskapp.
Dec 2 16:17:15 localhost systemd[2130]: flaskapp.service: Failed at step EXEC spawning /home/flaskappuser/flaskapp/flaskvenv/bin/gunicorn: Permission denied
Dec 2 16:17:15 localhost systemd[1]: flaskapp.service: Main process exited, code=exited, status=203/EXEC
Dec 2 16:17:15 localhost systemd[1]: flaskapp.service: Unit entered failed state.
Dec 2 16:17:15 localhost systemd[1]: flaskapp.service: Failed with result 'exit-code'.
Dec 2 16:17:15 localhost systemd[1]: flaskapp.service: Service hold-off time over, scheduling restart.
Dec 2 16:17:15 localhost systemd[1]: Stopped flaskapp.
Dec 2 16:17:15 localhost systemd[1]: flaskapp.service: Start request repeated too quickly.
Dec 2 16:17:15 localhost systemd[1]: Failed to start flaskapp.
Dec 2 16:17:21 localhost systemd[1]: supervisor.service: Service hold-off time over, scheduling restart.
Dec 2 16:17:21 localhost systemd[1]: Stopped Supervisor process control system for UNIX.
Dec 2 16:17:21 localhost systemd[1]: Started Supervisor process control system for UNIX.
I tried with sudo and it doesn't work either. I have searched everything online but no result. Can anyone help me with this?
I´m using docker tools on windows.
create command was working perfectly last week and I managed to create a number of machines on Digital Ocean. Then I tried today with no success. I repeated the same command with different regions and I always get the same result:
λ docker-machine create -d digitalocean --digitalocean-access-token=MYTOKEN --digitalocean-region=ams2 vmname
Running pre-create checks...
Creating machine...
(fernu) Creating SSH key...
(fernu) Creating Digital Ocean droplet...
(fernu) Waiting for IP address to be assigned to the Droplet...
Waiting for machine to be running, this may take a few minutes...
Detecting operating system of created instance...
Waiting for SSH to be available...
Detecting the provisioner...
Provisioning with ubuntu(systemd)...
Installing Docker...
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
Error creating machine: Error running provisioning: ssh command error:
command : sudo systemctl -f start docker
err : exit status 1
output : Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details.
If I execute the suggested command:
root#fernu:~# systemctl status docker.service
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)
Drop-In: /etc/systemd/system/docker.service.d
└─10-machine.conf
Active: inactive (dead) (Result: exit-code) since Fri 2017-06-30 20:56:13 UTC; 8min ago
Docs: https://docs.docker.com
Process: 4943 ExecStart=/usr/bin/docker daemon -H tcp://0.0.0.0:2376 -H unix:///var/run/docker.sock --storage-driver aufs --tlsverify --tlscacert /etc/docker/ca.pem --tlscert /etc/docker/server.pem --tlskey /etc/docker/server-key.pem --label provider=digitalocean (code=exited, status=1/FAILURE)
Main PID: 4943 (code=exited, status=1/FAILURE)
Jun 30 20:56:13 fernu systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE
Jun 30 20:56:13 fernu systemd[1]: Failed to start Docker Application Container Engine.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Unit entered failed state.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Failed with result 'exit-code'.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Service hold-off time over, scheduling restart.
Jun 30 20:56:13 fernu systemd[1]: Stopped Docker Application Container Engine.
Jun 30 20:56:13 fernu systemd[1]: docker.service: Start request repeated too quickly.
Jun 30 20:56:13 fernu systemd[1]: Failed to start Docker Application Container Engine.
Any help would be appreciated
Update
It´s working with ubuntu 14:
--digitalocean-image=ubuntu-14-04-x64 so it seams like a problem with the default image (ubuntu-16-04-x64)
This seems to be hitting a lot of people. TL;DR: There is a bug in docker-machine v0.12.0 and this issue can be resolved by upgrading.
Logging in to the DigitalOcean instance and running journalctl -xe provides more information:
-- Unit docker.service has begun starting up.
Jul 07 20:03:52 docker-sandbox docker[4930]: `docker daemon` is not supported on Linux. Please run `do
Jul 07 20:03:52 docker-sandbox systemd[1]: docker.service: Main process exited, code=exited, status=1/
Jul 07 20:03:52 docker-sandbox systemd[1]: Failed to start Docker Application Container Engine.
-- Subject: Unit docker.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
The key here is docker daemon is not supported on Linux. A bug in docker-machine's version comparison code caused an incorrect systemd unit file to be produced (located at /etc/systemd/system/docker.service.d/10-machine.conf) on certain versions of Ubuntu.
A fix has been committed and a new release (v0.12.1) was made.
You can grab the latest release at: https://github.com/docker/machine/releases/tag/v0.12.1