I am trying to update setuptools on my Dockerfile in order to solve the vulnerability
CVE-2022-40897.
However, when going to the Jfrog of the project, with neither of them appears the setuptools with a higher version than when neither of these options is followed.
I have tried the following options:
RUN apk add --upgrade py3-setuptools
RUN apk upgrade --no-cache py3-setuptools
RUN python -m ensurepip RUN pip install --no-cache --upgrade pip setuptools
Any ideas of how can I force setuptools to be updated on the Dockerfile?
The vulnerability is fixed in setuptools version 65.5.1. To specify the new version of setuptools in your Dockerfile, include the following:
RUN pip install setuptools>=65.5.1
Alternatively, if your project contains a "requirements.txt" file, then you can add the following line to that file:
setuptools>=65.5.1
Related
I'm trying to install psycopg2-binary (pip3 install psycopg2-binary) inside the virtual environment of my Django project on Centos 7 with preinstalled Postgresql 12 and have the well-known error:
Error: pg_config executable not found.
pg_config is required to build psycopg2 from source. Please add the directory
containing pg_config to the $PATH or specify the full executable path with the
option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
If you prefer to avoid building psycopg2 from source, please install the PyPI
'psycopg2-binary' package instead.
I tried to install python3-devel postgresql-libs postgresql-server postgresql-devel postgresql-contrib, but still have this error.
pip3 install psycopg2, pip install psycopg2 - the same problem.
PS The problem was solved via updating pip (pip install --upgrade pip).
you can try it this method, is very useful
sudo apt-get install postgresql postgresql-dev python-dev
I posted the question below, but none of the answers I was pointed to worked, though they look like they should.
I activated (again) the virtualenv. It still tells me that pip can't be found by apt when doing an 'apt install' command. But here is where I am now, and very confused.
I pointed my directory to "/home/.../q7root/bin/pip" and did an "ls". It shows a sub-directory with pip in it (or, I think, a link to it - I'm not the best at Unix). When I type "which pip" I get the path to this point ('q7root/pip'). bit if I just type "pip" at the CLI I get I get this error:
[![pip error][1]][1]
I have looked at my PATH, and this q7root/bin is the first place to look on the path. And, despite trying mightily with all the references people gave me, pip3 never gets installed.
But even pip is challenged. "which pip" points to this copy in the virtual environment site, but typing "pip" as a command tells me 'No module named pip.'
So pip seems to need more stuff installed (?), or there is some mess. Any advice?
Original Question:
At the suggestion of others working on what was a functional Django project, I upgraded to a more recent version of Ubuntu (18).
However, when I first try to run it it blows up at line 3 of the initial script module when asked to import django as a package.
I tried pip -r requirements.txt, but the system said pip was an unknown package. I dropped down and used apt to load pip onto my machine (sudo apt-get pip), then tried using pip itself (pip update pip) which failed.:
[![Pip load error message][2]][2]
I also tried pip install django, and got this:
[![django not found][3]][3]
I would have thought an OS upgrade would not require re-installing all currently installed packages (seems like a no-brainer to do the work of installing everything that had been installed). But right now I am terribly stuck...obviously, having 'pip' let's you (at least) have a basic CLI tool.
Any advice?
[1]: https://i.stack.imgur.com/OPfgc.png
[2]: https://i.stack.imgur.com/shLOc.png
[3]: https://i.stack.imgur.com/bEhDB.png
It depends on the version of python.
Python 3
sudo apt update
sudo apt install python3-pip
Python 2
sudo apt update
sudo apt install python-pip
How to Install Pip on Ubuntu 18.04
Start with a fresh Ubuntu install. I think you've run too many commands for your current setup to be reproduceable.
Install python3 and python3-venv.
sudo apt update
sudo apt install python3 python3-venv
Use the venv module to create the virtual env.
python3 -m venv myenv
source myenv/bin/activate
You now have access to pip in the venv.
It's OK to upgrade pip in the virtual env, I suggest you don't ever upgrade the system pip otherwise you might hit issues like this.
(myenv) python -m pip --version
(myenv) python -m pip install --upgrade pip
Now you can use pip to install your requirements in the virtual env.
(myenv) python -m pip install -r requirements.txt
In the above commands I've used python -m pip instead of pip. This is the recommended way, as it ensures that you are using the version of pip that matches python.
In the end, this was a state of deep computer confusion. I was already disk-limited so I bought a new computer, and this error did not recur with the same code being used.
I made a model with ImageField(). But whenever I run python manage.py it says you need to install pillow.ERRORS:
sho.Product.image: (fields.E210) Cannot use ImageField because Pillow is not installed.
HINT: Get Pillow at https://pypi.org/project/Pillow/ or run command "python -m pip
install Pillow".
It did tell you how to fix it , You dont have the pillow library installed so the imagefield wont work unless you run python -m pip install Pillow . Running the command will solve the problem
I think you are using old version of Django old version don't support for ImageField() without installing pillow. just update the Django package by running following command
you must do the following:
1- Update pip
python -m pip install --upgrade pip
2- If you already install Django update by using the following command
pip install --upgrade Django
or you can uninstall it using the following command
pip uninstall Django
3- If you don't install it yet use the following command
python -m pip install Django
4- Type your code
Enjoy
Install Pillow library, pip install Pillow
in your models.py import Pillow as below
from PIL import Image
I have Anaconda2, which come with Spyder.
I want to install an autopep8 for Spyder but I don't know which and how
Normally you can install it using:
pip install spyder.autopep8
So in anaconda (apparently there is no conda build for sypder.autopep8 ) so you just need to make sure you have pip installed in your conda environment and then use pip to install it:
conda install pip
pip install spyder.autopep8
or if you want to install it directly from the github repo:
pip install git+ssh://git#github.com/spyder-ide/spyder-autopep8
If you install directly from git, there is not way for it to give you a distribution not found error.
After that do shift+F8 in spyder to autopep8.
Otherwise, if you are using a .yml file for your conda environment, you just need to add
- pip
- pip:
- git+ssh://git#github.com/spyder-ide/spyder-autopep8
to your environment file and then run
conda env update -f environment.yml
from the command line.
I've just learned how to use virtualenv and I installed Django 1.4.5. I'm assuming that the virtualenv created a clean slate for me to work on so with the Django 1.4.5 installed, I copied all my previous files into the virtualenv environment.
I tried to run the server but I get an error saying "no module named MySQLdb". I think this means that I forgot to install MySQL-python. I tried to install it via
pip install MySQL-python
But I get this error
Downloading/unpacking MySQL-python
Running setup.py egg_info for package MySQL-python
The required version of distribute (>=0.6.28) is not available,
and can't be installed while this script is running. Please
install a more recent version first, using
'easy_install -U distribute'.
(Currently using distribute 0.6.24 (/home/bradford/Development/Django/django_1.4.5/lib/python2.7/site-packages/distribute-0.6.24-py2.7.egg))
Complete output from command python setup.py egg_info:
The required version of distribute (>=0.6.28) is not available,
and can't be installed while this script is running. Please
install a more recent version first, using
'easy_install -U distribute'.
(Currently using distribute 0.6.24 (/home/bradford/Development/Django/django_1.4.5/lib/python2.7/site-packages/distribute-0.6.24-py2.7.egg))
----------------------------------------
Command python setup.py egg_info failed with error code 2 in /home/bradford/Development/Django/django_1.4.5/build/MySQL-python
Not quite sure how to go about fixing this problem =/ any help much appreciated!
I recently had exactly this issue (just not in relation to Django). In my case I am developing on Ubuntu 12.04 using the default pip and distribute versions, which are basically a little out of date for MySQL-python.
Because you are working in an isolated virtualenv, you can safely follow the suggested instruction without affecting your Python installation.
So you can...
workon your_virtualenv #activate your virtualenv, you do use virtualenvwrapper, right?
easy_install -U distribute #update distribute on your virtualenv
pip install MySQL-python #install your package
If for some reason upgrading distribute is not an option, you could try installing an older version of MySQL-python as follows (you'd have to check this version is compatible with your version of Django):
pip install MySQL-python==x.y.z #where x.y.z is the version you want
Spent an hour looking through stackoverflow. Evntually found answer in the other question. This is what saved me:
sudo apt-get install libmysqlclient-dev
mysql_config goes with the package.
When doing in a virtualenv :
pip install MySQL-python
I got
EnvironmentError: mysql_config not found
To install mysql_config, as Artem Fedosov said, first install
sudo apt-get install libmysqlclient-dev
then everything works fine in virtualenv
MySQL driver for Python (mysql-python) needs libmysqlclient-dev. You can get it with:
sudo apt-get update
sudo apt-get install libmysqlclient-dev
If python-dev is not installed, you may have to install it too:
sudo apt-get install python-dev
Now you can install MySQL driver:
pip install mysql-python
Here is a more detailed documentation for MySQL in Django:
http://codex.themedelta.com/how-to-install-django-with-mysql-in-a-virtualenv-on-linux/
I had to do this:
pip install mysql-python
inside the virtualenv
The commands are always run in ubuntu:
easy_install -U distribute
later
sudo apt-get install libmysqlclient-dev
and finally
pip install MySQL-python
The suggested solutions didn't work out for me, because I still got compilation errors after running
`$ sudo apt-get install libmysqlclient-dev`
so I had to run
apt-get install python-dev
Then everything worked fine for me with
apt-get install python-dev
Try this:
Version Python 2.7
MySQL-python package, you should use either MySQL_python‑1.2.5‑cp27‑none‑win32.whl or
MySQL_python‑1.2.5‑cp27‑none‑win_amd64.whl depending on whether you have installed 32-bit or 64-bit Python.
pip install MySQL_python‑1.2.5‑cp27‑none‑win32.whl
if you are using mysqlclient package, then use
mysqlclient‑1.4.6‑cp27‑cp27m‑win32.whl or
mysqlclient‑1.4.6‑cp27‑cp27m‑win_amd64.whl
pip install mysqlclient‑1.4.6‑cp27‑cp27m‑win32.whl
https://www.lfd.uci.edu/~gohlke/pythonlibs/#mysqlclient