I have a SharePoint list that I want to retrieve the column names from, based on the row value. The column names will then be matched against another SharePoint list.
In the below example I know the value of the Function column. Based on that, I want to know the column names of all columns where the checkbox in that row is checked.
I think I'm nearly there. I can filter the columns based on the job title and allowed values. The issue now is the "StartsWith". I want to filter the column names, but I don't know the name of the column to filter on. It has to loop trough all the columns. How do I do this?
Also I'm not sure if AllowedValues is the right way to filter the columns based on the value. Can someone verify this for me?
//Get job title
Set(selectedUserJobTitle, Office365Users.UserProfileV2(galleryDirectReports.Selected.userPrincipalName).jobTitle);
//Get questions starting with "Q", based on the selectedUserJobTitle and values being true
ClearCollect(colQuestions,
Sort(
Filter('Comp - Fuctions',
Function.Value = selectedUserJobTitle,
//TODO: Replace "Title" with actual column name
StartsWith(Title, "Q"),
AllowedValues = true
),
Title, Ascending
)
);
Related
In Power BI, I need to create a VLOOKUP alternative. From the research I've done, this is done with the LOOKUPVALUE function, but the problem is that function needs one specific SEARCH ITEM, which isn't super helpful in a VLOOKUP type scenario where you have a full column of values to search for?
Given these two tables, connected through the user_name and first_name columns:
...what's the formula needed in order to create a new column in the Employee_Table called phone_call_group by using the names as the search items in order to return the group they belong to? So how can I end up with this?
(Forget that the entries in each table are already sorted, needs to be dynamic). Will be back tomorrow to review solutions.
In Power BI you have relations between tables instead of Excel's VLOOKUP function.
In your case you just have to create a one-to-one relation between
'Phone_Call_Table'[user_name] and 'Employee_Table'['first_name]'
With that you can add a Calculated Column to your 'Employee_Table' using the following expression:
phone_call_group = RELATED(Phone_Call_Table[group])
and in the data view the table will look like this:
LOOKUPVALUE() is just a workaround if for other reasons you can't establish that relation. What you've been missing so far is that in a Calculated Column there is a Row Context which gives you exactly one value per row for the <search_value> (this is different from Measures):
alt_phone_call_group =
LOOKUPVALUE(
Phone_Call_Table[group],
Phone_Call_Table[user_name],
Employee_Table[first_name]
)
I have a table visual in PowerBI that summarizes work hours by employee. The first column shows the employee name.
When training managers on how to use it I want to anonymize by showing employee numbers instead of names.
I tried adding a what-if parameter Anonymous with values 0 and 1 and use IF() in the DAX of a calculated column but it is not working. It ignores the parameter value.
Person = IF(Anonym[Anonym value] = 0; Time[Name]; Time[Empno])
will always show Name.
Person = IF(Anonym[Anonym value] = 1; Time[Name]; Time[Empno])
will always show Empno.
Another option if you really need to use a column and needs it to be "dynamic" is to use a PowerQuery parameter and add a new column based on it and then create your conditional. The downside of this is that you will have to refresh your query everytime you want to change the parameter
I have imported a JSON file into PowerBI and it contains a column in which the values are of type "List". I am looking to expand that column into multiple columns.
Specifically, the data contains a Sprint Name, the start date and the end date of the sprint, along with some other values associated with each sprint.
Trying to use "Expand to new rows" duplicates each sprint instance, creating a table that looks like this, duplicating each sprint instance multiple times for each associated value:
Sprint Name Value
JAN(S1Dev) 2019-01-01
JAN(S1Dev) 2019-01-13
JAN(S1Dev) {attribute}
JAN(S1Dev) {attribute}
JAN(S2Dev) 2019-01-14
JAN(S2Dev) 2019-01-31
JAN(S2Dev) {attribute}
JAN(S2Dev) {attribute}
FEB(S1Test) 2019-02-01
FEB(S1Test) 2019-02-15
... ...
I would like to do something similar to the "expand" feature, which instead creates a new column with each attribute rather than a new row. This is currently vastly increasing the size of my table for no reason, while also making the data practically un-useable. Any help would be appreciated, cheers!
I have found a very simple solution to this, but as it took me some time to figure it out I will answer my own question instead of deleting it to help others in the future...
Upon importing the JSON data into PowerBI first select "Convert to Table" to view the data as a table with editable properties.
Next, click the arrows pointing away from each other at the top of the column of Lists, and select "Extract Values".
Select a delimiter to use for concatenating values, I am choosing a comma since I know that the data contained within the list does not have any commas in it. If your data contains commas within it, choose something else. Similarly, if your data contains one of the delimiters, do not choose that as the delimiter.
It should now display a comma-separated list where it previously displayed "List" in orange text.
Now, right-click on the column and select "Split Column" then choose "By Delimiter"
Select the delimiter that you previously chose, and under "split at" select "Each occurrence of the delimiter" then click OK.
Your column should now be split into multiple columns based on the list!
I am using Power BI to bring together data from several systems and display a dash board with data from all of the systems.
The dashboard has a couple of filters which are then used to display the data relating to one object across all systems.
When the dashboard is first loaded and none of the filter have been selected, the data cards display information from all rows in the table.
Is there a way to make a data card only display one row of data?
or
Be blank if there are more than one row of data?
There's no direct way to look at the number of rows in the visual, count them, and do something different if there's more than 1.
That said, there are a few things you can do.
HASONEFILTER
If you have a specific column in your table that, when selected, filters your results to a single row, then you can check if there's a filter on that column using HASONEFILTER. (If you have multiple alternative columns,any of which filter to a single row, that's ok too.)
You could then create a measure for each column that tests HASONEFILTER. If true, return the MAX of the column. (The reason for MAX is because measures always have to aggregate, but the MAX of a 1-row column will be the same as the value in that column.) If false, return either BLANK() or an empty string, depending on your preference.
E.g.
ColumnAMeasure = IF(HASONEFILTER(Sheet1[Slicer Column]),MAX(Sheet1[COLUMN A]), "")
ColumnBMeasure = IF(HASONEFILTER(Sheet1[Slicer Column]),MAX(Sheet1[COLUMN B]), "")
where Sheet1 is the name of the table and "Slicer Column" is the name of the column being used as a slicer
HASONEVALUE
If you have multiple columns that could be used as filters in combination (meaning that having a filter applied on "Slicer Column" doesn't guarantee only 1 row in the table), then rather than testing HASONEFILTER, you can test HASONEVALUE.
ColumnAMeasure = IF(HASONEVALUE(Sheet1[COLUMN A]),MAX(Sheet1[COLUMN A]), "")
ColumnBMeasure = IF(HASONEVALUE(Sheet1[Column B]),MAX(Sheet1[COLUMN B]), "")
Notice that HASONEVALUE tests the current column you're trying to display, rather than a slicer column like HASONEFILTER.
One side-effect of HASONEVALUE is that, if you're filtered to 3 rows, but all 3 rows have the same value for column A, then column A will display that value. (Whereas with HASONEFILTER, column A would stay blank until you're filtered to one thing.)
Low Tech
Both answers above depend on a measure existing for every column you want to display, so that you can test whether to display a blank row or not. That could become a pain if you have dozens of columns.
A lower-tech alternative is to add in an additional row with blanks for each column and then sort your table so that that row always appears first. (And shorten your visual so only the top row is visible.) Technically the other rows would be underneath and there'd be a scrollbar, but at least the initial display would be blank rather than showing a random row.
Hopefully something here has helped. Other people might have better solutions too. More information:
HASONEFILTER documentation: https://msdn.microsoft.com/en-us/library/gg492135.aspx
HASONEVALUE documentation: https://msdn.microsoft.com/en-us/library/gg492190.aspx
I have this table in Power BI, But I can't do another table.
How I can do this?
Now the values are grouped by date (different fields have information under one date, next the same fields are grouped by another date)
I want the values in the columns to be grouped by field (one field has date information next to it).
Edit1:
I can't set Date on the 2nd place in the grouping
Because date is column, traffic,orders,rev,costs- are values
You need to set Date on the 2nd place in the grouping, after a field containing traffic, orders, etc.
EDIT:
You need to unpivot these columns first, for example, in PowerQuery. Use Edit Query. This results in transforming your 4 columns to 2: Attribute and Value. Attribute will be your first grouping parameter. 2nd will be Date. Value column goes to values.
If you need your source query somewhere else, you may create new query for this very report only. It is done by first right-clicking original one and selecting Reference Query, and the doing any edits. This will keep original query intact.