I know this question has been answered lots already, I have tried the solutions but they are not working for me.
My error is the following:
Erro: LNK1104 cannot open file 'C:\Users\...\source\repos\ont lang.obj'
I am using the latest MSVC compiler and I am using Visual Studio.
I have tried going on task manager and locating tasks running it, but i couldn't find anything.
I have done Properties -> Linker -> General -> Additional Library Properties and assigned that C:\Users\...\source\repos\ont lang;%(AdditionalLibraryDirectories) but i am still getting an error. As you can see here
This was the solution in this question but I had no luck. I compiled it about 1 minute before and it worked fine but then I got the Link Error Message 1104. I have also tried this:
but I still had no luck. As i said before, it worked one minute, all I did to it was more code to the file and the next minute it didn't compile. I have also tried cleaning the project and rebuilding it again but still got the same issue. So does anyone know how I would go about resolving this error?
BTW: I have checked my file is actually real, here is proof:
Related
There are more than one C++ projects in a solution. Lets compile A, which will fail, and will have errors reported in Error List view. Now compile B (assume A is dependent on B), which will succeed. But, the errors rendered by compiling A doesn't go away.
Anyone encountered such issue? How to enable clearing the error-list view on each build (the way it is working for years). The Output window, however is clean on each new build.
Do you have 'Build Only' or 'Build + Intellisense' selected in the combo box? Many of my errors like this actually come from Intellisense (and tend to be bogus).
I currently have a similar problem with VS2015. I have a solution with c++ and c# wpf projects. Clean checkout, full build, no errors in Output but hundreds of errors appear in Error List. It reminds me of problems with earlier versions of VS back than the only fix was to close all open files but this time this is not helping either. In my case deleting the .suo file helped. See this for reference VS freaks out.
(edit) I read that Xamarin could cause the problem but uninstalling it and also uninstalling all the other addons delivered with VS2015 did not fix the problem. After a clean checkout and full build I got all the errors again.
On Visual Studio 2019, simply closing and restarting the application got rid of the warnings.
I have been trying out using Eclipse CDT for a course I am taking. Previously I have been using Visual Studio Express but since that requires me to be online and I have to use the IDE+compiler offline, I switched to Eclipse + Cygwin GCC.
Now everything was working prefectly, until I got an error about file paths in my make file. After reading some of the posts online, the issue seemed to be that Cygwin's make does not resolve absolute Windows file paths because of the ':' symbol and confuses it with a new target definition. The proposed fix was to download a fixed make file. I diligently did so and the programs would compile fine.
But after I went into the first debug session, everything froze. I aborted eclipse and tried a clean build but now the compilation wont happen AT ALL, which is very weird for me.
I can't find a post for a similar problem so I am really stuck now. I was currently working the assumption that my CDT may be corrupt or something so I downloaded Eclipse Luna just today and tried building using that, but no joy. Even a fresh project in a new workspace wont compile.
Appreciate the help in advance.
Did you try redownloading Eclipse? Sometimes Eclipse gets a fatal error glitch that makes it unable to compile anything. I've had this problem before, the only way i was able to fix it was to uninstall and re download the latest version. If this doesnt work, try switching to Bloodshed Dev C++ or codeblocks.
So it seems like an issue with the new make (v3.80). upgating it to v4.08 fixed the issue of not building.
Version 4.08 however does not fix the Windows file paths not being recognized properly and treated as a target definition. I am still getting the multiple target patterns. stop error.
EDIT: Found this on Stack overflow to solve the issue... should have searched better previously.
Very simple application fails with "multiple target patterns" from Eclipse
My QT5.1.1 project used to build with qt creator but when I came into work today it no longer worked. To my knowledge, nothing has changed since the last time I was on. A co-worker needed to use my workstation earlier this week and says that he did not change anything.
The error shows up as:
[ui_mainwindow.h] Error -1073741515
I did a Google search and tried a few things.
This page said to try a clean build and run qMake then rebuild. This did not work even after trying multiple times.
This page led to the suggestion of adding QT += widgets to the .pro file (although I did not believe this would work I tried anyways)
I also tried closing the project and re-opening it. I deleted the build directory and that didn't work either.
EDIT:
I added error code 135 because according to this answer on stack overflow the two are related. I have not encountered or seen this error code come up. I have downloaded the dependency walker but I am not sure how to use it.
After a clean start up I get the following pop up when opening a project.
Image of error pop up
It turns out that a coworker accidentally moved a bunch of DLLs out of my MinGW bin directory. I had to move them back.
I am trying to get the NetBeans IDE to work with the g++ compiler. I am downloading from cygwin. I've tried googling the problem and I have tried many things to get C++ to work on NetBeans. I can't figure out the magic trick so I am asking for your help.
I have two problems, I don't know if these problems are related to each other.
Problem one: I get this error when I try to run my small program.
Problem Two:I get a "Cannot find include file <iostream>". When I hold ctrl and hover over the include directory my compiler says Unresolved directive #include<iostream>
I followed this NetBeans Guide on how to install and configure C++ support. Following those directions I had received the two errors above.
Here is what my environment variable looks like: this
Here is what the C/C++ build tools look like for NetBeans: this
Here is the code I am trying to run; this
At the moment I am installing everything from the development tab in the cygwin setup program.
I've tried messing with different settings but the two problems were still there.
I've tried running NetBeans in admin mode but the two problems were still there
I've tried un-installing cygwin and installing minGW. That fixes problem number one, but the there is no output when the program runs.
I've tried adding C:\cygwin64\lib\gcc\x86_64-pc-cygwin\4.8.2\include\c++ to the "Include Directories and Headers" in Properties -> Build -> C++ Compiler. This resolved iostream, but the other directives under iostream had the same problem, that the other include files could not be found.
I've been at this problem for five hours or so. Any help would be appreciated.
Here is what I am running:
Windows 7 64 bit
NetBeans 7.4
If you need anything else, just ask.
The answer was that my firewall, comodo firewall, was sand boxing the files that needed to run. After disabling the sand boxing feature NetBeans ran fine.
Can anyone make any sense of this TFS build error? Googling produces few results and my research hasn't given me a solution.
Method not found: 'Void
Microsoft.TeamFoundation.TestManagement.Client.ModuleCoverage.set_Statistics(Microsoft.TeamFoundation.TestManagement.Client.CoverageStatistics)'.
For a previous build, where I was getting this same error, I changed Analyze Test Impact to False, and then the build worked. That's not working here though.
What does this even mean? Is it a bug? Does anyone know how to fix it?
My attempt at fixing the issue:
I did not get this exact error, but I got a similar error where built in methods were failing because of the wrong signature and missing methods, because someone installed Visual Studio 2012 on one of my servers. My guess is the new TFS Dlls that came with 2012 were GAC'd and took precedence over the 2010 dlls. I would verify this hasn't happened to you as well.
It appears that the error shown in the original question wasn't really the problem. We have now fixed this in two different solutions, two different ways.
In the first solution, the build succeeded by fixing the CA errors.
In the second solution, the build succeeded by fixing syntax in a post-build event.
I think the entire problem is that an error was showing that wasn't really the problem. I'm not sure why that method not found error would be the symptom, but it wasn't the cause.
Actually, that method not found error still shows in the build log, but the build succeeds, so sometimes you just have to move on...
I was getting this error in the webview but not in the build log file and the build was not failing. Applying the TFS 2010 SP1 patch fixed it for me.