I need to build a regex that have the following:
Rules to be applied:
exactly 14 characters
only letters (latin characters) and numbers
at least 3 letters
Regex still confuses me so I am struggling to get the correct output. I want to use it with swift and swiftui in an app I am making
(?=(.*[a-zA-Z]){3,}([0-9]){0,}){14,14}$
I tried this. But I know it is not the way
I would use a positive lookahead for the length requirement:
^(?=.{14}$)(?:[A-Za-z0-9]*[A-Za-z]){3}[A-Za-z0-9]*$
This pattern says to match:
^ from the start of the input
(?=.{14}$) assert exact length of 14
(?:
[A-Za-z0-9]*[A-Za-z] zero or more alphanumeric followed by one alpha
)
[A-Za-z0-9]* any alphanumeric zero or more times
$ end of the input
You need to use
^(?=(?:[0-9]*[a-zA-Z]){3})[a-zA-Z0-9]{14}$
Details
^ - start of string
(?=(?:[0-9]*[a-zA-Z]){3}) - at least three repeations of a letter after any zero or more digits sequence required
[a-zA-Z0-9]{14} - fourteen letters/digits
$ - end of string.
See the regex demo.
Related
I would like to have an expression to validate the plates of monaco.
They are written as follows:
A123
123A
1234
I started by doing:
^[a-zA-Z0-9]{1}?[0-9]{2}?[a-zA-Z0-9]{1}$
But the case A12A which is false is possible with that.
You can use
^(?!(?:\d*[a-zA-Z]){2})[a-zA-Z\d]{4}$
See the regex demo. Details:
^ - start of string
(?!(?:\d*[a-zA-Z]){2}) - a negative lookahead that fails the match if there are two occurrences of any zero or more digits followed with two ASCII letters immediately to the right of the current location
[a-zA-Z\d]{4} - four alphanumeric chars
$ - end of string.
You can write the pattern using 3 alternatives specifying all the allowed variations for the example data:
^(?:[a-zA-Z][0-9]{3}|[0-9]{3}[a-zA-Z]|[0-9]{4})$
See a regex demo.
Note that you can omit {1} and
To not match 2 chars A-Z you can write the alternation as:
^(?:[a-zA-Z]\d{3}|\d{3}[a-zA-Z\d]|\d[a-zA-Z\d][a-zA-Z\d]\d)$
See another regex demo.
So it needs 3 connected digits and 1 letter or digit.
Then you can use this pattern :
^(?=.?[0-9]{3})[A-Za-z0-9]{4}$
The lookahead (?=.?[0-9]{3}) asserts the 3 connected digits.
Test on Regex101 here
I am trying to block any strings that contain more than 3 numbers and prevent special characters. I have the special characters part down. I'm just missing the number part.
For example:
"Hello 1234" - Not Allowed
"Hello 123" - Allowed
I've tried the following:
/^[!?., A-Za-z0-9]+$/
/((^[!?., A-Za-z]\d)([0-9]{3}+$))/
/^((\d){2}[a-zA-Z0-9,.!? ])*$/
The last one is the closest I got as it prevents any special characters and any numbers from being entered at all.
I've looked through previous posts, but am coming up short.
Edit for clarification
Essentially I'm trying to find a way to prevent customers from entering PII on a form. No submission should be allowed that contains more than 3 numbers in a string.
Hello1234 - Not allowed
12345 - Not allowed
1111 - not allowed
No where in the comment section when the user enters the string should there be more than 3 numbers in total.
About the patterns that you tried
^[!?., A-Za-z0-9]+$ The pattern matches 1+ times any of the listed, including 1 or more digits
((^[!?., A-Za-z]\d)([0-9]{3}+$)) If {3}+ is supported, the pattern matches a single char from the character class, 1 digit followed by 3 digits
^((\d){2}[a-zA-Z0-9,.!? ])*$ The pattern repeats 0+ times matching 2 digits and 1 of the listed in the character class
You can use a negative lookahead if that is supported to assert not 4 digits in a row.
^(?!.*\d{4})[a-zA-Z0-9,.!? ]+$
regex demo
If there can not be 4 digits in total, but 0-3 occurrences:
^[a-zA-Z,.!? ]*(?:\d[a-zA-Z,.!? ]*){0,3}$
Explanation
^ Start of string
[a-zA-Z,.!? ]* Match 0+ times any of the listed (without a digit)
(?:\d[a-zA-Z,.!? ]*){0,3} Repeat 0 - 3 times matching a single digit followed by optional listed chars (Again without a digit)
$ End of string
regex demo
If you don't want to match an empty string and a lookahead is supported:
^(?!$)[a-zA-Z,.!? ]*(?:\d[a-zA-Z,.!? ]*){0,3}$
See another regex demo
Here is my two cents:
^(?!(.*\d){4})[A-Za-z ,.!?\d]+$
See the online demo
^ - Start string anchor.
(?! - Open a negative lookahead.
( - Open capture group.
.*\d - Match anything other than newline up to a digit.
){4} - Close capture group and match it 4 times.
) - Close negative lookahead.
[A-Za-z ,.!?\d]+ - 1+ Characters from specified class.
$ - End string anchor.
I think it should cover what you described.
Assuming you mean <= 3 digits, this may be a naive one but how about
[ALLOWED_CHARS]*[0-9]?[ALLOWED_CHARS]*[0-9]?[ALLOWED_CHARS]*[0-9][ALLOWED_CHARS]*?
Fill [ALLOWED_CHARS] to whatever you define is not special character and nums.
I've run into some issues with this one and cannot find it in past questions.
Criteria:
Reject pure digits
Reject pure letters
Reject any symbols
Accept ONLY Alphanumeric combo
MUST be equal to 10 characters total
Here is what I have made and the problems with each:
^(?!^\d*$)[a-zA-Z\d]{10}$
This fails criteria #2
^[a-zA-Z0-9]{10}$
This fails criteria #1
I have tried some others that meet all criteria but fail the 10 char limit.
Any help is appreciated.
You may use a second lookahead:
^(?!\d+$)(?![a-zA-Z]+$)[a-zA-Z\d]{10}$
See the regex demo and the Regulex graph:
Details
^ - start of string
(?!\d+$) - a negative lookahead that makes sure the whole string is not composed of just digits
(?![a-zA-Z]+$) - the whole string cannot be all letters
[a-zA-Z\d]{10} - 10 letters or digits
$ - end of string.
Try this:
(?=^.{10}$)^([a-z]+\d[a-z0-9]*|\d+[a-z][a-z0-9]*)$
Demo
Explanation:
(?=^.{10}$)^([a-z]+\d[a-z0-9]*|\d+[a-z][a-z0-9]*)$
(?=^.{10}$) # there's exactly 10 characters following
^( | )$ # we match the entire string, containing either:
[a-z]+\d[a-z0-9]* # letters, followed by a number, followed by alphanumerics, or
\d+[a-z][a-z0-9]* # numbers, followed by a letter, followed by alphanumerics
Use lookahead to find at least one char of each type you require, and specify the length and char limitation in the "regular" part of your regex:
^(?=.*[a-zA-Z])(?=.*\d)[0-9a-zA-Z]{10}$
(?=.*[a-zA-Z])- Look ahead and find a letter,
(?=.*\d) - Look ahead and find a digit
[0-9a-zA-Z]{10} - exactly 10 digit/letter chars
I'm having issues with the validation of the chilean RUT/RUN with a regex expression in PCRE. I have the next regular expression but sadly can't make it work:
\b[0-9|.]{1,10}\-[K|k|0-9]
I need help to see what is wrong with the code. The application I need to use only uses PCRE.
Thank you.
You may use
^(\d{1,3}(?:\.\d{1,3}){2}-[\dkK])$
to match and capture (that is not usually necessary, but your app requires a capturing group to extract its contents) a whole string that matches the pattern. See the regex demo.
To match shorter strings that match this pattern inside a larger string, you may remove ^ and $ (see demo) or use \b word boundaries instead (see this demo).
Details:
^ - start of string
\d{1,3} - 1 to 3 digits
(?:\.\d{1,3}){2} - 2 sequences of a literal . and 1 to 3 digits
- - a hyphen
[\dkK] - a digit, k or K.
$ - end of string.
As they sometimes omit the dots, I used this one:
^(\d{1,2}(?:[\.]?\d{3}){2}-[\dkK])$
Details:
^ - start of string
\d{1,2} - 1 or 2 digits
(?:[.]?\d{3}){2} - 2 sequences of an optional '.' and 3 digits
- a hyphen
[\dkK] - a digit, k or K
$ - end of string
1234567-k OK
12345678-k OK
1.234.567-k OK
12.345.678-k OK
known issue:
12.345678-k and 12345.678-k still OK and I do not like this :(
You need to change to ^(\d{1,3}(?:\.\d{3}){2}-[\dkK])$ to capture only 2 sequence of 3 digits after the first sequence of 1-3 digits.
please consider being more specific in the REGEX build, since it matched wrong numbers, such as 17.87.335-2. Also the included one did't match formats without the dots or the hyphens.
Please consider using the following format: \b(\d{1,3}(?:(.?)\d{3}){2}(-?)[\dkK])\b
Modified prior version to try the other formats: https://regex101.com/r/2Us0j6/9
I need regex that only allows a maximum of 2 digits (or whatever the desired limit is actually) to be entered into an input field.
The requirements for the field are as follows:
Allow a-z A-Z
Allow 0-9
Allow - and . characters
Allow spaces (\s)
Do not allow more than 2 digits
Do not allow any other special characters
I have managed to put together the following regex based on several answers on SO:
^(?:([a-zA-z\d\s\.\-])(?!([a-zA-Z]*\d.*){3}))*$
The above regex is really close. It works successfully for the following:
test 12 test
test12
test-test.12
But it allows an input of:
123 (but not 1234, so it's close).
It only needs to allow an input of 12 when only digits are entered into the field.
I would like some help in finding a more efficient and cleaner (if possible) solution than my current regex - but it must still be regex, no JS.
You could use a positive lookahead like
(?=^(?:\D*\d\D*){2}$) # only two digits
^[- .\w]+$ # allowed characters
See a demo on regex101.com.
You may use a negative lookahead anchored at the start that will make the match fail once there are 3 digits found anywhere in the string:
^(?!(?:[^0-9]*[0-9]){3})[a-zA-Z0-9\s.-]*$
^^^^^^^^^^^^^^^^^^^^^^^
See the regex demo
Details:
^ - start of string
(?!(?:[^0-9]*[0-9]){3}) - the negative lookahead failing the match if exactly 3 following sequences are found:
[^0-9]* - zero or more chars other than digits
[0-9] - a digit (thus, the digits do not have to be adjoining)
[a-zA-Z0-9\s.-]* - 0+ ASCII letters, digits, whitespace, . or - symbols
$ - end of string.