I'm trying to write a custom installer for a project, which acts like a one in all .exe.
The project persists of a mariadb installer, a xampp installer and some other php files.
I want the result to be a single executable file which contains both of the installer files and all of the other files, which it then extracts and does futher stuff to, which isn't important for the issue.
The .exe files are just for temporary use while they are installing their content via a silent install.
I read about the concept of embedded files but didn't find working examples of that for visual studio 2022.
What would be a good approach to archieve that?
Related
I am new to this coding world. So forgive me if any dumb question is asked or I made any mistakes
I am making a cpp tool which works well on my machine & also on others too. But inside it there is a function which works with some BAT & VBS files stored in a separate folder. Now the problem is when I am sharing the EXE file it is not working as the folder directory can not be found on other devices.
Now how can i solve this scenario? Is there a way to make installer for the console app which will copy the necessary files and folders in to the user's C drive? Or can I include the files into the EXE and extract them to a folder so the the program can use those?
Is there any possible solution for this ?
I am using Visual Studio Code & mingw gcc compiler for building the app
How about creating installer using setup creator(https://installforge.net). You can package multiple files in the installer and select installation directory to something like c:/program files/your_application_name.
That way your executable and other files will be in the same folder and it will also create a start menu shortcut
One straightforward solution I can think of is to include the dependency files with the exe when you share it to others.
Another way is to embed the dependency files as resource files into your executable when you build it in Visual Studio, then extract them when you run the exe (A little difficult to implement)
Or just create an installer like this
I want to package my executable file and other needed files into an install file (using NSIS) so that other people can install and use. There are a few file types I am uncertain of whether they are needed for installation or if it is safe to delete them.
Here is a random example of the files in the project folder as well as the Debug file automatically generated by VS:
I have already deleted the .user file as I know that is not needed, but not sure when it comes to .vcxproj, .tlog, .build.cppclean, .idp, and .pdb files. Also, do I need to keep the .obj files as well as the .cpp files?
This is my first time trying to do this, I am just messing around to seeing how it all works so thanks in advance.
You generally only need the .exe. Your app might depend on custom .dlls or the C++ run-time library in which case you would bundle the custom .dlls and/or the C++ redistributable.
Your screen shots are of a debug build and you normally want to distribute a release build instead because it is often smaller and contains more optimized code.
.obj files contain the machine code for each source file and is used by the linker when it merges all the required code into your .exe.
.pdb files contain debugging information. You should not distribute them but it is helpful to store them for yourself in case you need to debug a released version of your application.
The rest of the files in Debug and Release can also be ignored.
If your project is open source then you could include the c/c++ files and the Visual Studio project files. Or you could just upload them to Github.
In NSIS you could do something like this
InstallDir $ProgramFiles\MyApp
Page Directory
Page InstFiles
Section
SetOutPath $InstDir
File myproject\Release\MyApp.exe
File mylibrary\Release\*.dll
SectionEnd
It is a good idea to test your installer on a freshly installed Windows instance. Ideally the minimal version you require, Windows 7 etc. This should allow you to verify that you have included all the files required by your application.
I am new to Visual Studio, and I am trying to figure out the best way to organize my projects.
I am writing an application using the sfml library, and I have various resources (images/sounds) that I am using. I dropped these into the project folder, and everything works fine when I launch my application from Visual Studio.
I am wondering though, how does this translate to when a program is deployed? If I go into my solution's debug folder, and try launching the exe, it is unable to locate any of the resource files. Am I suppose to tell Visual Studio to copy files to an appropriate directory, and if so how?
Thanks for any advice or links.
For slightly more complicated "deployment" scenario, you can use post-build scripts to copy the correct files into the output directory and even package it into a zip file, for example.
If you find yourself writing more than one page of batch you may want to consider the options below, because batch is a PITA to debug.
Recent MSVS project files are actually MSBuild files (just open the .vcxproj file in Notepad or Vim). For instance you can use the Copy task, invoke arbitrary programs using the Exec task, etc. It can be a bit more sophisticated than the batch script in post-build scripts. MSBuild 4 can use Property Functions making it quite expressive. Useful reference if you do this
For a "full blown" project, you'll want to roll a dedicated build system using a dedicated MSBuild file, NAnt or even higher level wrappers like Rake.
As a less popular alternative, in a previous project I built a small dedicated "builder" .exe project in the solution and have other projects depend on it. Then in the post-build scripts of the other projects I just invoke the builder projects with arguments to make it perform certain tasks. The advantage is that you can write C# (or F# or VB.NET) and not have to fight the build system (as much) and I think it works quite well for small-mid sized projects.
for my project, I direct everything into one directory.
Go to ur project configuration, change General->Output directory, General->intermediate directory, and Debugging->Working directory to one directory. The reason you cannot locate the resource files is because the debug directory is not the same as the output directory.
I'm a fairly experienced C# dev, but have very little C++ knowledge. I have set my self a project to get a custom Firefox build running, and be able to control it from C# code.
I have got so far as getting and building the Firefox source, and creating a Visual Studio solution for the exe. This means I can now run via F5 in Visual studio. If I open a source file, I can set break points and have them hit.
What I'm not sure how to do, is load the entire source, as if I were working with a C# .NET solution. As I understand it, there are no project files with the Firefox source, as it is not windows specific source. I have followed an online example that suggests creating using 'project from existing code' option in VS, which resulted in VS grinding to a halt as there were so many files.
What are the steps to getting the code into an environment (preferably Visual Studio) that makes it simple(ish) to edit, debug and navigate the source code.
Note: Instructions I have been working through so far are here: https://cs.senecac.on.ca/~david.humphrey/writing/debugging-firefox.html
From you question, I beleive you are almost there. You have a working build ? That means you have :
A Solution File (*.sln)
A Project file (*.vcxproj or *.vcproj depending on yoru visual studio version)
With that in hand, what works best for me is this layout (adapted to your needs) :
Starting from a root folder of you liking, say MyProject
Create a new Empty solution there
Move the folder with your working build in a subdirectory, like MyProject\MyCustomFirefox
In Visual Studio "Add an existing project" and find your vcxproj file
In the same solution, create a C# project like you always do, in a directory at the same level as your FF build, like MyProject\MyFirefoxController
In short the solution file is pretty much alone in the root directory, and each project is in its own directory.
You will also need to adjust build options so that the output files (a DLL or an EXE) is seen by your C# project. While your are at it, make the C# project dependent on your Firefox build : it will instruct the msbuild to rebuild one if you change the other.
This will not work with the Express edition, I beleive. They are single language.
If you have a command line build path, which is creating a VS-debuggable executable, you could try adding all the source files to the project, but marking them 'exclude from build'. Then add a 'post-build step' to call the command line tools.
You may have to do a little more tweaking in the project properties to get the command line output recognized as the output to debug, but theoretically this could work.
I'm working on a little game called freegemas, it's an open source version of the classic Bejeweled written in C++ and using gosu as the graphic API. I've been developing it under Ubuntu Linux as usual, but the other day I wanted to give it a try and I compiled it on Windows using Visual Studio 2005 (which I had never used before). The program worked flawlessly.
To compile it on Windows I manually copied all the source and header files to a new project on MSVC, but I would like to adapt the SVN so I don't have to recreate the project every time I want to compile it.
Therefore, the question would be: What's the best way of organizing the svn so I can have, on the one hand, a Makefile to compile the project in Linux, and, on the other side, the MSVC project's files? Right now I've got a simple folder called trunk with all header, source and resource files on it.
I've never used Visual Studio before, so I don't know which files are the most important either. Maybe some of those files are auto-generated and do not need to be svn-versioned.
Thanks in advance.
You could just keep the project files in a seperate directory "winbuild" or similar. Still, to maintain them would require manual interaction (ie adding every new file manually). The only files you would need to upload to svn are the *.vcproj (for MSVC 2005/2008) and *.vcxproj (MSVC 2010).
Alternatively, you could opt for a cross-platform solution like CMake, which could generate makefiles and Visual Studio project files from a common CMakeLists.txt, which is the only "project file" that would have to be maintained (instead of your makefile). Especially for a simple (?) project like yours (some headers+sources). There would be no need to include any makefiles or vcproj files at all, just the CMakelists.txt file would suffice.
There are others like CMake (SCons, boost.jam, jam, premake, etc.)
It should be feasable, but requires some testing and trial-and-error.