When I Click On WampServer Icon TO Start WampServer, It Shows the Below Errors-
The configuration file contains a syntax error on line 14; [EParseError] No tray icon was specified. Please assign a tray icon using the Trayicon directives in the [Config] section.
How do I Open WampServer Without Reinstalling?
Close The Window That Showing Error Message or Exit Error Window from Task Manager.
Run C:\wamp64\restart_wampserver.bat
and Reopen Wamp Application
Related
How to fix this error
Im using mingw and when ever im trying to execute a program this error occurs.
Go to settings option [shown as manage] click on settings and then type "save" on the search bar. Scroll down a bit and you will find an unchecked box for the option-"save code before running" under the code runner. Check that box and now run your c file as usual.
I am working on a Hybrid App (Web UI with Native Service) of API version 4.0 for my Gear S3 Frontier. After successful compilation of the App, In order to track the cause of application crash, when I launch it on emulator W-4.0-circle-x86-preview in debug mode, it gives an error message.
Error Message:
Cannot launch application with GDBClient.
Error in final launch sequence
Failed to execute MI command:
source G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\.gdbcommand
Error message from debugger back end:
G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\.gdbcommand:5: Error in sourced command file:\nG:Computer ScienceApp DevelopmentMyAppGalaxyWatchAppMyAppNative ServiceDebugMyAppservice: No such file or directory.
G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\.gdbcommand:5: Error in sourced command file:\nG:Computer ScienceApp DevelopmentMyAppGalaxyWatchAppMyAppNative ServiceDebugMyAppservice: No such file or directory.
GDBCommand File Contents:
set sysroot C:\Tizen\TizenStudio\tizen-studio\platforms\tizen-4.0\wearable\rootstraps\wearable-4.0-emulator.core
set debug-file-directory C:\Tizen\TizenStudio\tizen-studio\platforms\tizen-4.0\wearable\rootstraps\wearable-4.0-emulator.core\usr\lib\debug
set solib-search-path G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug
dir C:\Tizen\TizenStudio\tizen-studio\platforms\tizen-4.0\wearable\rootstraps\wearable-4.0-emulator.core\usr\src\debug
file "G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\MyAppservice"
sharedlibrary
During the web search I found some of the GDBClient errors but couldn't find the solution to this one.
I've also tried setting the path of GDB Debugger to i386-linux-gnueabi-gdb-7.8 and GDB Command File to the absolute path of .gdbcommand which should be run.
It seems like the problem lies with this line:
file "G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\MyAppservice"
Try to remove spaces from the directory name. Change Computer Science to something like Computer_Science and App_Development to App_Development. Then right-click on your project and go to Debug As -> Debug Configurations..., then delete the active debug configuration and again create new one.
You may also try by removing the whole line file "G:\Computer Science\App Development\MyApp\GalaxyWatchApp\MyApp\Native Service\Debug\MyAppservice" from the .gdbcommand file manually and check if it fixes the issue.
According to Microsoft, "If [the system] cannot locate the DLL, the system terminates the process and displays a dialog box that reports the error. " This is the result I get when I run my application outside of the command line, but I do not get the same system error when I run the application from a shell environment such as command prompt or powershell.
Is there a way to show the same error message when the application is run from a command line interface?
https://msdn.microsoft.com/en-us/library/aa271571(v=vs.60).aspx
SetErrorMode(GetErrorMode() & ~SEM_FAILCRITICALERRORS);
but I don't think you want to do this, as you do not know in which environment the user will run your application.
It is usually now a good idea to popup a dialogbox in e.g. a service environment.
What is the problem with examining the error code of whatever is failing e.g. LoadLibrary() and reacting to this error?
How can I start the wamp server on windows 7 using wamp version 2.4?
Following is the error message I get:
The configuration file contains a syntax error on line 24:
[EParseError][config] section directive "ImageList" already specified.
Error:
The configuration file contains a syntax error on line 7;
[EParseError] No tray icon was specified. Please assign a tray icon by
using on the of the Tray icon directives in the [Config] section.
Caused by:
Computer abruptly shutting down while server is running
Fix:
• Go to the wamp/scripts folder
• Open console/cmd as admin
• run: php refresh.php
• Done!
Make sure you have php in your system environment settings
then go to the wamp/scripts folder
open console
run:
php refresh.php
answer from here solved my issue, referenced above info from this stack answer
ISSUE
You have a duplicate entry on C:\wamp\wampmanager.ini
ImageList=images_off.bmp or something like that.
FIX
Remove one of them (probably line 24)
It sounds like you have been playing with \wamp\wampmanager.tpl
Never play with wampmanager.tpl unless you have taken a copy first!
WAMPServer rebuilds \wamp\wampmanager.ini using a script that uses \wamp\wampmanager.tpl among other files as input, each time you start WAMPServer or when you use the wampmanager menus and click refresh.
So to fix your problem edit of wampmanager.tpl to remove the duplicated line and then do:
rightclick wampmanager icon -> refresh
Or just exit wampmanager and restart it.
to rebuild the \wamp\wampmanager.ini file
Take a backup of your Wampmanager.ini file in your wamp installation directory (in my case it is c:\Wamp64). Then rename it or move it to some other folder.
Get the wampmanager.ini from a new installation or any similar installation if you already have, then paste it in the same path. It will work like charm. This may change any of the settings you had earlier but it will make your wamp working without reinstalling it.
Wamp Manager folder
Wamp Manager configuration file in CMD prompt
It is interesting that this error shows up after initial install of the current version 3.2.6 found on aviatechno (without being able to tamper with any installed configuration file, the .ini in the installation is broken). It reports an error with line 27: WAMPMARIADBOFF.
[Services]
Name: APACHESERVICE
WAMPMARIADBOFFName: MARIADBSERVICE
WAMPMYSQLOFFName: MYSQLSERVICE
Use the new ini repair tool you can find on the aviatechno website
which corrects the lines in the ini file as:
[Services]
Name: wampapache
Name: wampmysqld
Name: wampmariadb
...
Action: service; Service: wampapache; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmysqld; ServiceAction: startresume; Flags: ignoreerrors
Action: service; Service: wampmariadb; ServiceAction: startresume; Flags: ignoreerrors
Only do this on new installs
Even after that wampserver does not start or does not start the services. To repair: stop the background process AeTrayMenu, head over to the folder c:\wamp64 removing its content and reinstall.
This did the trick for me.
Hey guys I really need help.
I have recently started programming C++ again and I am trying to get Code Blocks up and running but it keeps failing because of this error.
"ERROR: You need to specify a debugger program in the debuggers's settings."
Understandably this means there isn't a debugger program so I have to download one. I tried to find the gdb.exe for MinGW but I can't find it at all. I just end up with the MinGW's Installation Manager and being left confused.
Are there any tutorials about using the MinGW written for beginners or anyone willing to help?
Thanks in advance.
Steps to add gdb.exe
Open MinGW Installation Manager
select package "mingw32-gdb" from the list.
Then select "Apply Changes" in Installation menu.
This will automatically install gdb.exe in the path C:\MinGW\bin.
Please let me suggest you debugger program TDM-GCC. For download and install visit
http://wiki.codeblocks.org/index.php?title=MinGW_installation
Because a debugger program (toolchain) is very complex undertaking, is not standard in Code::Blocks. You must download it and install on Code::Blocks.
Note: It is impossible copy and paste images here. In the case linked page changes, I, or another one, should suggest new link.
However following are instructions according to images and my experience.
Download TDM-GCC from https://jmeubank.github.io/tdm-gcc/download/ click [tdm64-gcc-10.3.0-2.exe] and run it.
In Wizard Action window - Click [Create].
In Select Edition window - If MinGW/TDM (32-bit) is not checked, check it. Click [Next>].
In Licence Changes window - Click [Next>].
In New Instalation: Instalation Directory window - If text box is "C:\TDM-GCC-32", it's okay. If is not, click [Browse ...], and navigate: C:\ > TDM-GCC-32 > click [OK]. Now text box is C:\TDM-GCC-32. Click [Next>].
If a small window appears saying The directory TDM-GCC-32 is not empty! Are you sure you want to install here?. Click [Yes].
In New Installation: Download Mirror window - Click [Next>].
In New Installation: Choose Components window - Check whether Add to PATH box is checked. Actually is checked. Click [Install].
In Installing window - Wait till [Next] become black. Then click it. Even if Instalation Failed window appears click [Next].
In Completing the TDM-GCC Setup Wizard window - Click [Finish].
Go to Code Blocks > Settings > Compiler.
10a. In Global compiler settings window click "Toolchain executables". Just below, find "Compiler's installation directory". If the below text field is C:\TDM-GCC-32, it's okay. If not, click the [...] at the end of the field. In "Select directory" wizard, navigate to C:\TDM-GCC-32. Now "Folder:" should be TDM-GCC-32. Click [Select a folder] in "Select directory" wizard.
10b. In Global compiler settings. Below red "Note:..." find "Program Files" > "Debuger". If text field reads "GDB/CDB debuger : Default", it's okay, click [OK]. If not, click the down arrow at the end of the field > choose "GDB/CDB debuger : Default". Check that text field is "GDB/CDB debuger : Default". Click [OK].
Go to Code Blocks > Settings > Debugger... . In Common window, left list, click "Default". If "Executable path:"'s text field is "C:\TDM-GCC-32\bin\gdb32.exe", it's okay, click [OK]. If not, click [...] button and navigate C: > TDM-GCC-32 > bin > click gdb32 (or gdb32.exe) file > click [open] in "Select executable file" wizard. "Executable path:" should be C:\TDM-GCC-32\bin\gdb32.exe. Click [OK]. Now you can debug your program.
If Debugger does not function, close Code Blocks and restart them.
Regards.
Hey guys I suggest a better way. Download "gdb.exe" from the Internet and copy it to the below path.
C:\MinGW\Bin
It's really works. I did it.