How to configure Coverity for IAR ARM (iccarm) - c++

I configured Coverity with
The build is successful, but I receive Recoverable errors in the system headers (see build-log.txt)
For me it’s not clear why these errors occur (build is successful) and how to configure Coverity that these errors don’t occur at all?
2022-10-20T13:38:11.227719Z|cov-build|66594|info|> cov-build 2022.3.3 (build d37b3c67c6 p-2022.3-push-69)
2022-10-20T13:38:11.227742Z|cov-build|66594|info|> Coverity Build Capture (64-bit) version 2022.3.3 on Linux 5.15.0-48-generic x86_64
2022-10-20T13:38:11.227742Z|cov-build|66594|info|> Internal version numbers: d37b3c67c6 p-2022.3-push-69
2022-10-20T13:38:11.227742Z|cov-build|66594|info|>
2022-10-20T13:38:11.227757Z|cov-build|66594|info|> Dumping from hostname : ci
2022-10-20T13:38:11.227757Z|cov-build|66594|info|>
2022-10-20T13:38:11.227764Z|cov-build|66594|info|> Platform info:
2022-10-20T13:38:11.227764Z|cov-build|66594|info|> Sysname = Linux
2022-10-20T13:38:11.227764Z|cov-build|66594|info|> Release = 5.15.0-48-generic
2022-10-20T13:38:11.227764Z|cov-build|66594|info|> Machine = x86_64
2022-10-20T13:38:11.227764Z|cov-build|66594|info|>
2022-10-20T13:38:11.227764Z|cov-build|66594|info|>
2022-10-20T13:38:11.227780Z|cov-build|66594|info|> cov-build command: cov-build --dir build/test/icc cmake --build .
2022-10-20T13:38:11.227786Z|cov-build|66594|info|> cov-build expanded command: cov-build --dir build/test/icc cmake --build .
2022-10-20T13:38:11.227957Z|cov-build|66594|info|> build command: /usr/bin/cmake --build .
2022-10-20T13:38:11.227966Z|cov-build|66594|info|> thunk command: /opt/coverity/cov-analysis-2022-3/bin/cov-internal-thunk.sh cmake --build .
2022-10-20T13:38:11.227966Z|cov-build|66594|info|>
2022-10-20T13:38:11.227974Z|cov-build|66594|info|> Set UseSharedCompilation to false.
2022-10-20T13:38:11.227982Z|cov-build|66594|info|> Set COVERITY_BIN to /opt/coverity/cov-analysis-2022-3/bin
2022-10-20T13:38:11.227993Z|cov-build|66594|info|> Set COVERITY_SITE_CC to iccarm
2022-10-20T13:38:11.227999Z|cov-build|66594|info|> Set COVERITY_SITE_CC_CAPTURE_DESCENDANTS to
2022-10-20T13:38:11.228005Z|cov-build|66594|info|> Set COVERITY_TEMP to /tmp/cov-repo/61cbee90e75bbbfcd24d03a3fa896a77
2022-10-20T13:38:11.228015Z|cov-build|66594|info|> Set COVERITY_COMMON_TEMP to /tmp
2022-10-20T13:38:11.228023Z|cov-build|66594|info|> Set COVERITY_IDIR to /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc
2022-10-20T13:38:11.228048Z|cov-build|66594|info|> Set COVERITY_OUTPUT to /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/build-log.txt
2022-10-20T13:38:11.228053Z|cov-build|66594|info|> Set COVERITY_LOG to /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/build-log.txt
2022-10-20T13:38:11.228061Z|cov-build|66594|info|> Set COVERITY_OUTPUT_ENCODING to US-ASCII
2022-10-20T13:38:11.228066Z|cov-build|66594|info|> Set COVERITY_SYSTEM_ENCODING to US-ASCII
2022-10-20T13:38:11.228073Z|cov-build|66594|info|> Set COVERITY_EMIT to /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/emit
2022-10-20T13:38:11.228095Z|cov-build|66594|info|> Set COVERITY_IS_COMPILER to 0
2022-10-20T13:38:11.228100Z|cov-build|66594|info|> Set COVERITY_TOP_PROCESS to 0
2022-10-20T13:38:11.228103Z|cov-build|66594|info|> Set COVERITY_IS_COMPILER_DESCENDANT to 0
2022-10-20T13:38:11.228107Z|cov-build|66594|info|> Set COVERITY_DISENGAGE_EXES to "qemuwrapper;qemu-aarch64;qemu-alpha;qemu-arm;qemu-armeb;qemu-cris;qemu-i386;qemu-m68k;qemu-microblaze;qemu-mips;qemu-mipsel;qemu-nios2;qemu-ppc;qemu-ppc64;qemu-ppc64abi32;qemu-sh4;qemu-sh4eb;qemu-sparc;qemu-sparc32plus;qemu-sparc64;qemu-x86_64"
2022-10-20T13:38:11.228123Z|cov-build|66594|info|>
2022-10-20T13:38:11.228123Z|cov-build|66594|info|>
2022-10-20T13:38:11.228123Z|cov-build|66594|info|> Dumping Environment Variables:
2022-10-20T13:38:11.228123Z|cov-build|66594|info|>
2022-10-20T13:38:11.228142Z|cov-build|66594|info|> JENKINS_HOME=/home/repo/.jenkins
2022-10-20T13:38:11.228146Z|cov-build|66594|info|> GIT_PREVIOUS_SUCCESSFUL_COMMIT=5ecdaedd1ad5f4173cc5aa22a7ff06a2d7aa659b
2022-10-20T13:38:11.228151Z|cov-build|66594|info|> CI=true
2022-10-20T13:38:11.228154Z|cov-build|66594|info|> RUN_CHANGES_DISPLAY_URL=http://unconfigured-jenkins-location/job/xxx/324/display/redirect?page=changes
2022-10-20T13:38:11.228158Z|cov-build|66594|info|> HOSTNAME=ci
2022-10-20T13:38:11.228167Z|cov-build|66594|info|> NODE_LABELS=built-in
2022-10-20T13:38:11.228171Z|cov-build|66594|info|> GIT_COMMIT=c8902b01612b12a90701b3949e8be64e65775ba7
2022-10-20T13:38:11.228175Z|cov-build|66594|info|> HOME=/home/repo
2022-10-20T13:38:11.228179Z|cov-build|66594|info|> HUDSON_COOKIE=94d36788-17b8-4a07-a30e-6e22a28d86dc
2022-10-20T13:38:11.228183Z|cov-build|66594|info|> JENKINS_SERVER_COOKIE=durable-d67ab9cc6fd15cde89a20cb1f752777478da5dc72dc942e65e59bab789c478c1
2022-10-20T13:38:11.228187Z|cov-build|66594|info|> WORKSPACE=/home/repo/.jenkins/workspace/xxx
2022-10-20T13:38:11.228190Z|cov-build|66594|info|> CROSS_ROOT=/opt/iarsystems/bxarm-9.30.1/arm
2022-10-20T13:38:11.228194Z|cov-build|66594|info|> NODE_NAME=built-in
2022-10-20T13:38:11.228198Z|cov-build|66594|info|> RUN_ARTIFACTS_DISPLAY_URL=http://unconfigured-jenkins-location/job/xxx/324/display/redirect?page=artifacts
2022-10-20T13:38:11.228201Z|cov-build|66594|info|> ASM=iasmarm
2022-10-20T13:38:11.228205Z|cov-build|66594|info|> STAGE_NAME=Icc Arm + Coverity
2022-10-20T13:38:11.228209Z|cov-build|66594|info|> EXECUTOR_NUMBER=0
2022-10-20T13:38:11.228213Z|cov-build|66594|info|> GIT_BRANCH=origin/master
2022-10-20T13:38:11.228217Z|cov-build|66594|info|> TERM=xterm
2022-10-20T13:38:11.228220Z|cov-build|66594|info|> RUN_TESTS_DISPLAY_URL=http://unconfigured-jenkins-location/job/xxx/324/display/redirect?page=tests
2022-10-20T13:38:11.228224Z|cov-build|66594|info|> BUILD_DISPLAY_NAME=#324
2022-10-20T13:38:11.228228Z|cov-build|66594|info|> HUDSON_HOME=/home/repo/.jenkins
2022-10-20T13:38:11.228232Z|cov-build|66594|info|> JOB_BASE_NAME=xxx
2022-10-20T13:38:11.228236Z|cov-build|66594|info|> PATH=/opt/coverity/cov-analysis-2022-3/bin:/opt/SEGGER/JLink_V766:/opt/iarsystems/bxarm-9.30.1/common/bin:/opt/iarsystems/bxarm-9.30.1/arm/bin:/opt/gcc-arm-none-eabi-10.3-2021.07/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
2022-10-20T13:38:11.228240Z|cov-build|66594|info|> TOOLCHAIN_FILE=../../../cmake/platforms/$TOOLCHAIN_FILENAME
2022-10-20T13:38:11.228244Z|cov-build|66594|info|> BUILD_ID=324
2022-10-20T13:38:11.228247Z|cov-build|66594|info|> BUILD_TAG=jenkins-xxx-324
2022-10-20T13:38:11.228251Z|cov-build|66594|info|> GIT_URL=file:///home/repo/repository
2022-10-20T13:38:11.228255Z|cov-build|66594|info|> BUILD_NUMBER=324
2022-10-20T13:38:11.228259Z|cov-build|66594|info|> JENKINS_NODE_COOKIE=a1e213c4-5eae-41f4-bff8-c26bcc76eacd
2022-10-20T13:38:11.228262Z|cov-build|66594|info|> CXX=iccarm
2022-10-20T13:38:11.228266Z|cov-build|66594|info|> RUN_DISPLAY_URL=http://unconfigured-jenkins-location/job/xxx/324/display/redirect
2022-10-20T13:38:11.228270Z|cov-build|66594|info|> HUDSON_SERVER_COOKIE=e67de7100ca0e18a
2022-10-20T13:38:11.228274Z|cov-build|66594|info|> JOB_DISPLAY_URL=http://unconfigured-jenkins-location/job/xxx/display/redirect
2022-10-20T13:38:11.228278Z|cov-build|66594|info|> JOB_NAME=xxx
2022-10-20T13:38:11.228282Z|cov-build|66594|info|> PWD=/home/repo/.jenkins/workspace/xxx/build/test/icc
2022-10-20T13:38:11.228286Z|cov-build|66594|info|> GIT_PREVIOUS_COMMIT=6ec26434a11544368ba767770e88c74dd3391906
2022-10-20T13:38:11.228290Z|cov-build|66594|info|> WORKSPACE_TMP=/home/repo/.jenkins/workspace/xxx#tmp
2022-10-20T13:38:11.228293Z|cov-build|66594|info|> CC=iccarm
2022-10-20T13:38:11.228297Z|cov-build|66594|info|> TOOLCHAIN_FILENAME=toolchain-iar-iccarm.cmake
2022-10-20T13:38:11.228301Z|cov-build|66594|info|> COVERITY_PREV_XML_CATALOG_FILES=
2022-10-20T13:38:11.228305Z|cov-build|66594|info|> COVERITY_TOP_CONFIG=/tmp/cov-repo/61cbee90e75bbbfcd24d03a3fa896a77/cov-configure/coverity_config.xml
2022-10-20T13:38:11.228309Z|cov-build|66594|info|> COVERITY_BUILD_INVOCATION_ID=1
2022-10-20T13:38:11.228313Z|cov-build|66594|info|> COVERITY_CONFIG_FILE=/opt/coverity/cov-analysis-2022-3/config/coverity_config.xml
2022-10-20T13:38:11.228317Z|cov-build|66594|info|> UseSharedCompilation=false
2022-10-20T13:38:11.228321Z|cov-build|66594|info|> COVERITY_BIN=/opt/coverity/cov-analysis-2022-3/bin
2022-10-20T13:38:11.228325Z|cov-build|66594|info|> COVERITY_SITE_CC=iccarm
2022-10-20T13:38:11.228332Z|cov-build|66594|info|> COVERITY_SITE_CC_CAPTURE_DESCENDANTS=
2022-10-20T13:38:11.228336Z|cov-build|66594|info|> COVERITY_TEMP=/tmp/cov-repo/61cbee90e75bbbfcd24d03a3fa896a77
2022-10-20T13:38:11.228340Z|cov-build|66594|info|> COVERITY_COMMON_TEMP=/tmp
2022-10-20T13:38:11.228344Z|cov-build|66594|info|> COVERITY_IDIR=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc
2022-10-20T13:38:11.228348Z|cov-build|66594|info|> COVERITY_REWRITE_FROM=
2022-10-20T13:38:11.228352Z|cov-build|66594|info|> COVERITY_REWRITE_TO=
2022-10-20T13:38:11.228356Z|cov-build|66594|info|> COVERITY_ENABLE_JAVA_ANNOTATION_FRAMEWORK_SUPPORT=1
2022-10-20T13:38:11.228360Z|cov-build|66594|info|> COVERITY_OUTPUT=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/build-log.txt
2022-10-20T13:38:11.228364Z|cov-build|66594|info|> COVERITY_LOG=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/build-log.txt
2022-10-20T13:38:11.228367Z|cov-build|66594|info|> COVERITY_OUTPUT_ENCODING=US-ASCII
2022-10-20T13:38:11.228371Z|cov-build|66594|info|> COVERITY_SYSTEM_ENCODING=US-ASCII
2022-10-20T13:38:11.228375Z|cov-build|66594|info|> COVERITY_EMIT=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/emit
2022-10-20T13:38:11.228379Z|cov-build|66594|info|> COVERITY_IS_COMPILER=0
2022-10-20T13:38:11.228383Z|cov-build|66594|info|> COVERITY_TOP_PROCESS=0
2022-10-20T13:38:11.228387Z|cov-build|66594|info|> COVERITY_IS_COMPILER_DESCENDANT=0
2022-10-20T13:38:11.228390Z|cov-build|66594|info|> COVERITY_DISENGAGE_EXES=qemuwrapper;qemu-aarch64;qemu-alpha;qemu-arm;qemu-armeb;qemu-cris;qemu-i386;qemu-m68k;qemu-microblaze;qemu-mips;qemu-mipsel;qemu-nios2;qemu-ppc;qemu-ppc64;qemu-ppc64abi32;qemu-sh4;qemu-sh4eb;qemu-sparc;qemu-sparc32plus;qemu-sparc64;qemu-x86_64
2022-10-20T13:38:11.228395Z|cov-build|66594|info|> COVERITY_COMPILER_PATH_MISMATCH_FILE=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/has_path_mismatches
2022-10-20T13:38:11.228399Z|cov-build|66594|info|> COVERITY_PATHLESS_CONFIGS_FILE=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/has_pathless_configs
2022-10-20T13:38:11.228405Z|cov-build|66594|info|>
2022-10-20T13:38:11.228405Z|cov-build|66594|info|>
2022-10-20T13:38:11.228405Z|cov-build|66594|info|> Dumping configuration:
2022-10-20T13:38:11.228405Z|cov-build|66594|info|>
2022-10-20T13:38:11.228415Z|cov-build|66594|info|> User/default configuration:
2022-10-20T13:38:11.228415Z|cov-build|66594|info|>
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Configuration read from: command-line
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: coverity
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: config
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: include Value: /opt/coverity/cov-analysis-2022-3/config/coverity_config.xml
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: config
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: prevent
2022-10-20T13:38:11.228421Z|cov-build|66594|info|> Node: dir Value: /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc
2022-10-20T13:38:11.228421Z|cov-build|66594|info|>
2022-10-20T13:38:11.228444Z|cov-build|66594|info|> Configuration read from: /opt/coverity/cov-analysis-2022-3/config/coverity_config.xml
2022-10-20T13:38:11.228444Z|cov-build|66594|info|> Node: coverity
2022-10-20T13:38:11.228444Z|cov-build|66594|info|> Node: cit_version Value: 1
2022-10-20T13:38:11.228444Z|cov-build|66594|info|> Node: config
2022-10-20T13:38:11.228444Z|cov-build|66594|info|> Node: include Value: /opt/coverity/cov-analysis-2022-3/config/template-iar_cxx_arm-config-0/coverity_config.xml
2022-10-20T13:38:11.228444Z|cov-build|66594|info|>
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Configuration read from: /opt/coverity/cov-analysis-2022-3/config/template-iar_cxx_arm-config-0/coverity_config.xml
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: coverity
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: cit_version Value: 1
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: config
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: build
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: compiler
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: template_compiler Value: true
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: comp_name Value: iccarm
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: comp_translator Value: iar_cxx:arm
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: comp_lang Value: C++
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: comp_generic Value: iar/arm
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: options
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: id Value: iar_cxx:arm-iccarm-.*
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: opt_preinclude_file Value: /opt/coverity/cov-analysis-2022-3/config/template-iar_cxx_arm-config-0/../user_nodefs.h
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: begin_command_line_config
2022-10-20T13:38:11.228461Z|cov-build|66594|info|> Node: md5 Value: 5f6642eb878a88db1dfb16309fb4338b
2022-10-20T13:38:11.228461Z|cov-build|66594|info|>
2022-10-20T13:38:11.230365Z|cov-build|66594|info|> Using LD_PRELOAD =
/opt/coverity/cov-analysis-2022-3/bin/libcapture-linux64-${PLATFORM}.so
[73713] EXECUTING: /opt/iarsystems/bxarm-9.30.1/arm/bin/ielfdumparm --source test.out
...
[73394] EXECUTING: grep dev
[STATUS] Compiling /home/repo/.jenkins/workspace/xxx/src/nodynalloc/new_del.cpp
/opt/coverity/cov-analysis-2022-3/bin/cov-emit --dir=/home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc --ignore_path=/tmp/cov-repo/61cbee90e75bbbfcd24d03a3fa896a77/cov-configure --ignore_path=/tmp/cov-repo/61cbee90e75bbbfcd24d03a3fa896a77/cov-repo/ab3163e8db5f4764170d37b222c3d703 --pre_preinclude /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/emit/ci/config/5092253b194ec0553c3a9de3b66cf08a/iar_cxx_arm-config-0/coverity-macro-compat.h --pre_preinclude /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/emit/ci/config/5092253b194ec0553c3a9de3b66cf08a/iar_cxx_arm-config-0/coverity-compiler-compat.h --c++ --dollar --allow_qualified_anonymous_unions --allow_global_anonymous_union --no_const_string_literals --unsigned_chars --trigraphs --enable_user_sections --add_type_modifier=__absolute,__big_endian --add_type_modifier=__little_endian --add_type_modifier=__packed,__pcrel --add_type_modifier=__sbrel,__global_reg --add_type_modifier=__coverity_16bit_float --allow_qualified_operator_new_return --lazy_hex_pp_number --short_enums --user_defined_literals --macro_preempts_udl_suffix --ppp_translator "replace/_Mem \*operator new(\[\])? _Mem/*operator new$1" --ppp_translator "replace/operator new mem/operator new" --ppp_translator replace/0.Infinity/1.0\/0.0 --ppp_translator replace/0.Na[Nn]/0.0\/0.0 --allow_injected_template_symbol --arg_dependent_overload --class_scope_noexcept --no_predefined_cplusplus -w --no_predefines --comp_ver 9030001 --char_bit_size=8 --wchar_t_keyword --no_multiline_string --ignore_calling_convention --no_enable_80bit_float --no_enable_128bit_float --macro_stack_pragmas --type_traits_helpers --rtti --inline_keyword --has_include_macro --has_include_next_macro --has_cpp_attribute_macro --no_predefines --preinclude /opt/coverity/cov-analysis-2022-3/config/template-iar_cxx_arm-config-0/../user_nodefs.h --c++17 --c++17 --no_rtti --no_exceptions --short_enums --gnu_version=50400 --macro_stack_pragmas --add_type_modifier=__data:1,__code --no_stdarg_builtin --sys_include /opt/iarsystems/bxarm-9.30.1/arm/inc/c --sys_include /opt/iarsystems/bxarm-9.30.1/arm/inc/c/aarch32 --sys_include /opt/iarsystems/bxarm-9.30.1/arm/inc/cpp --ppp_translator replace/(#include\s+)u8/$1 --ppp_translator replace/(#define\s+_DLIB_CONFIG_FILE_HEADER_NAME\s+)u8/$1 --ppp_translator replace/(#define\s+_DLIB_CONFIG_FILE_STRING\s+)u8/$1 --ppp_translator replace/(typedef\s+_Align_type<)::/$1 -DNDEBUG -U__EXCEPTIONS -D__coverity_undefine___EXCEPTIONS -D__FAR_RUNTIME_ATTRIBUTE__=__near_func -U__FOR_DEBUG__ -D__coverity_undefine___FOR_DEBUG__ -D__LITTLE_ENDIAN__=1 -U__PLACEMENT_DELETE -D__coverity_undefine___PLACEMENT_DELETE -U__RTTI -D__coverity_undefine___RTTI -U__STDC_VERSION__ -D__coverity_undefine___STDC_VERSION__ -U__coverity_undefine___STDC_VERSION__ -D__coverity_undefine___coverity_undefine___STDC_VERSION__ -U__cpp_exceptions -D__coverity_undefine___cpp_exceptions -U__cpp_rtti -D__coverity_undefine___cpp_rtti --type_sizes=dex8Pfilw4s2 --type_alignments=dex8Pfilw4s2 --size_t_type=j --ptrdiff_t_type=i /home/repo/.jenkins/workspace/xxx/src/nodynalloc/new_del.cpp
[73393] EXECUTING: /bin/mount
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xstddef0", line 16: warning #59:
function call is not allowed in a constant expression
#if _HAS_NOEXCEPT || !_HAS_EXCEPTIONS
^
[73399] EXECUTING: grep dev
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xstddef0", line 16: warning #59:
function call is not allowed in a constant expression
#if _HAS_NOEXCEPT || !_HAS_EXCEPTIONS
^
[73398] EXECUTING: /bin/mount
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xstddef0", line 16: warning #59:
function call is not allowed in a constant expression
#if _HAS_NOEXCEPT || !_HAS_EXCEPTIONS
^
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/yvals.h", line 159: warning #59:
function call is not allowed in a constant expression
#if _HAS_NOEXCEPT
^
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xstddef0", line 16: warning #59:
function call is not allowed in a constant expression
#if _HAS_NOEXCEPT || !_HAS_EXCEPTIONS
^
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xmemnew", line 7: warning #59: function
call is not allowed in a constant expression
#if __has_feature(cxx_noexcept)
^
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xmemnew", line 7: warning #59: function
call is not allowed in a constant expression
#if __has_feature(cxx_noexcept)
^
[73403] EXECUTING: /bin/mount
[73404] EXECUTING: grep dev
"/opt/iarsystems/bxarm-9.30.1/arm/inc/c/xmemnew", line 7: warning #59: function
call is not allowed in a constant expression
#if __has_feature(cxx_noexcept)
...
2022-10-20T13:38:39.392031Z|cov-build|66594|info|> Invoking cov-security-da with commands: /opt/coverity/cov-analysis-2022-3/bin/cov-security-da --dir /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc
2022-10-20T13:38:39.401624Z|cov-build|66594|info|> Dynamic analyzer took 9 ms
2022-10-20T13:38:39.401624Z|cov-build|66594|info|> Build time (cov-build overall): 00:00:28.195804
2022-10-20T13:38:39.401624Z|cov-build|66594|info|>
2022-10-20T13:38:39.402216Z|cov-build|66594|info|> Build time (C/C++ emits total): 00:06:17.288925
2022-10-20T13:38:39.402216Z|cov-build|66594|info|>
2022-10-20T13:38:39.402216Z|cov-build|66594|info|>
2022-10-20T13:38:39.402240Z|cov-build|66594|info|> Emitted 15 C/C++ compilation units (100%) successfully
2022-10-20T13:38:39.402240Z|cov-build|66594|info|> [WARNING] Recoverable errors were encountered during 12 of these C/C++ compilation units.
2022-10-20T13:38:39.402240Z|cov-build|66594|info|>
2022-10-20T13:38:39.402240Z|cov-build|66594|info|> 15 C/C++ compilation units (100%) are ready for analysis
2022-10-20T13:38:39.402240Z|cov-build|66594|info|> For more details, please look at:
2022-10-20T13:38:39.402240Z|cov-build|66594|info|> /home/repo/.jenkins/workspace/xxx/build/test/icc/build/test/icc/build-log.txt


Regarding the question in the title (how to configure for IAR), your cov-configure command line looks right to me.
The warning messages (function call is not allowed in a constant expression) are from the Coverity compiler, which believes the input is not valid C++, and hence is warning about it. But these warnings appear to be of a kind that will not cause any problem for analysis; the compiler just notes the problem but continues anyway, like with any other compiler warning. (When the analysis runs, if there is a consequence for fidelity, you would see RW.ROUTINE_NOT_EMITTED issues reported.)
Because the problem arises from inside the Coverity compiler, there isn't any easy way for the user to suppress these messages. My recommendation would be to create a minimal reproducer and send it to Coverity support for them to eventually fix in the product. If you really want to fix it yourself, you could probably fix it using a ppp_translator ("ppp" stands for "pre-preprocessor") element in the compiler configuration to rewrite the offending code on the fly, but that's a non-trivial undertaking.


Please see (contains a workaround and also the information with which release it shall be fixed)
https://community.synopsys.com/s/article/warning-59-function-call-is-not-allowed-in-a-constant-expression-if-HAS-NOEXCEPT

Related

conda-build fails to recognise libraries

I am trying to build a package using conda-build. This is my first time trying to build a conda package, and I am having far more problems than I expected too.
Here is my build.sh
CMAKE_PLATFORM_FLAGS+=(-DCMAKE_TOOLCHAIN_FILE="${RECIPE_DIR}/cross-linux.cmake")
cmake -DCMAKE_BUILD_TYPE=RelWithDebInfo -DCMAKE_INSTALL_PREFIX=$PREFIX ${CMAKE_PLATFORM_FLAGS[#]} .
make
cp surveyor.py random_pos_generator.py $PREFIX/bin/
cp add_filtering_info call_insertions clip_consensus_builder dc_remapper filter normalise reads_categorizer $PREFIX/bin/
And here is my meta.yaml:
{% set name = "insurveyor" %}
{% set version = "1.0.1" %}
package:
name: {{ name|lower }}
version: {{ version }}
source:
url: https://github.com/kensung-lab/INSurVeyor/archive/refs/tags/1.0.2.tar.gz
sha256: 33c85157892d3256abc96bb2a9053f05da9dcf55befeed720e965577db0b78b5
build:
skip: True # [not linux]
number: 0
requirements:
build:
- {{ compiler('c') }}
- {{ compiler('cxx') }}
- cmake >=3.5
- autoconf ==2.69
host:
- libcurl
- bzip2
- xz
- zlib
- libdeflate
- openssl
- htslib >=1.13
run:
- python
- numpy >=1.21.2
test:
source_files:
- demo/
about:
home: https://github.com/kensung-lab/INSurVeyor
summary: 'An insertion caller for Illumina paired-end WGS data.'
description: XXX
license: GPL-3.0-only
license_file: LICENSE
extra:
recipe-maintainers:
- Mesh89
And here is the output of the process:
https://justpaste.it/3gfzf
(stack overflow would think the log is spam)
There are plenty of worrying messages, for example:
Warning: rpath /home/user/anaconda3/conda-bld/insurveyor_1670384223059/_build_env/lib is outside prefix /home/user/anaconda3/conda-bld/insurveyor_1670384223059/_h_env_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_ (removing it)
Unknown format
WARNING :: Failed to get_static_lib_exports(/home/user/anaconda3/conda-bld/insurveyor_1670384223059/_h_env_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_placehold_/lib/libssl.a)
Unknown format
Binary doesn't have a program header
When I try to run any executable, I get
symbol lookup error: /lib/x86_64-linux-gnu/libp11-kit.so.0: undefined symbol: ffi_type_pointer, version LIBFFI_BASE_7.0
I have spent a long time trying to figure out what is wrong and I am completely lost. When I google the warning/error messages, I cannot find any results.
I wonder if there is something fundamental that I misunderstand about the build process.
For example, why does conda complain about the rpath of the executables pointing to the build environment? Why those "Unknown format" warnings regarding the static libraries?

Python3 C++ Module - Exception - GIL not held

I have created a minimal reproduction of an issue I am having, trying to create a C++ based Python3 module. The build environment is CMake, Visual Studio Pro 2019, WinSDK 10.0.18362, Python 3.9.4. When executing:
python3 -c "import pymod"
I will get an exception in release mode with a NULL access. In debug Python, I get additional information.
My CMakeLists.txt
cmake_minimum_required(VERSION 3.15)
project(pymod_minimal_repo_example)
find_package(Python3 COMPONENTS Interpreter Development)
add_library(pymod SHARED)
target_sources(pymod PRIVATE pymodmodule.cpp)
set_target_properties(pymod PROPERTIES SUFFIX ".pyd")
target_compile_options(pymod PRIVATE /Zi)
target_link_options(pymod PRIVATE /DEBUG:FULL)
target_link_libraries(pymod PRIVATE ${Python3_LIBRARIES})
target_include_directories(pymod PRIVATE ${Python3_INCLUDE_DIRS})
Following this python reference: https://docs.python.org/3.9/extending/extending.html#a-simple-example I created the following:
#define PY_SSIZE_T_CLEAN
#include <Python.h>
static struct PyModuleDef pymodmodule = {
PyModuleDef_HEAD_INIT, // m_base
"pymod", // m_name
NULL, // m_doc
-1, // m_size - submod not support must be static struct
NULL, // m_methods - no functions present
NULL, // m_slots - must be NULL
NULL, // m_traverse - not needed
NULL, // m_clear - not needed
NULL // m_free - not needed
};
PyMODINIT_FUNC PyInit_pymod(void) {
return PyModule_Create(&pymodmodule);
}
It is a functionally void module which does nothing, but should still run. Note that having m_methods defined, produces the same failure.
When the failure occurs, the following is output to the console:
E:\projects\pymod\build\Debug>python -c "import pymod"
Fatal Python error: _PyInterpreterState_GET: the function must be called with the GIL held, but the GIL is released (the current Python thread state is NULL)
Python runtime state: unknown
WinDbg jit debugger then catches the issue. A partial call stack shows my PyInit_pymod is called and when creating the python module, it cascades to a failure:
0:000> k
# Child-SP RetAddr Call Site
00 000000dc`abfed4a8 00007fff`71d51385 KERNELBASE!wil::details::DebugBreak+0x2
01 000000dc`abfed4b0 00007fff`71d511a8 python39_d!fatal_error_exit+0x15 [D:\a\1\s\Python\pylifecycle.c # 2201]
02 000000dc`abfed4e0 00007fff`71d4ea98 python39_d!fatal_error+0x1b8 [D:\a\1\s\Python\pylifecycle.c # 2286]
03 000000dc`abfed540 00007fff`71cbe730 python39_d!_Py_FatalErrorFunc+0x38 [D:\a\1\s\Python\pylifecycle.c # 2302]
04 000000dc`abfed580 00007fff`71aa8044 python39_d!_Py_FatalError_TstateNULL+0x10 [D:\a\1\s\Python\ceval.c # 251]
05 000000dc`abfed5b0 00007fff`71aa6cf2 python39_d!_PyInterpreterState_GET+0x34 [D:\a\1\s\Include\internal\pycore_pystate.h # 105]
06 000000dc`abfed5f0 00007fff`d0be13e7 python39_d!PyModule_Create2+0x12 [D:\a\1\s\Objects\moduleobject.c # 168]
>>>> 07 000000dc`abfed620 00007fff`751165dc pymod!PyInit_pymod+0x27 [E:\projects\pymod\pymodmodule.cpp # 19]
08 000000dc`abfed660 00007fff`751167ee python39!_PyImport_LoadDynamicModuleWithSpec+0x104 [C:\A\34\s\Python\importdl.c # 165]
09 000000dc`abfed6d0 00007fff`75116749 python39!_imp_create_dynamic_impl+0x86 [C:\A\34\s\Python\import.c # 2299]
0a 000000dc`abfed700 00007fff`750cb94b python39!_imp_create_dynamic+0x39 [C:\A\34\s\Python\clinic\import.c.h # 330]
0b 000000dc`abfed730 00007fff`750ad500 python39!cfunction_vectorcall_FASTCALL+0x9b [C:\A\34\s\Objects\methodobject.c # 426]
0c 000000dc`abfed7a0 00007fff`750ad2ef python39!PyVectorcall_Call+0x5c [C:\A\34\s\Objects\call.c # 248]
0d 000000dc`abfed800 00007fff`750ad418 python39!_PyObject_Call+0x4f [C:\A\34\s\Objects\call.c # 287]
0e (Inline Function) --------`-------- python39!PyObject_Call+0xc [C:\A\34\s\Objects\call.c # 293]
0f 000000dc`abfed830 00007fff`7508c65f python39!do_call_core+0xb8 [C:\A\34\s\Python\ceval.c # 5092]
10 000000dc`abfed880 00007fff`75083963 python39!_PyEval_EvalFrameDefault+0x5d6f [C:\A\34\s\Python\ceval.c # 3581]
11 (Inline Function) --------`-------- python39!_PyEval_EvalFrame+0x13 [C:\A\34\s\Include\internal\pycore_ceval.h # 40]
12 000000dc`abfedbb0 00007fff`750855a7 python39!_PyEval_EvalCode+0x2b3 [C:\A\34\s\Python\ceval.c # 4327]
13 000000dc`abfedc80 00007fff`7508823d python39!_PyFunction_Vectorcall+0x257 [C:\A\34\s\Objects\call.c # 396]
14 000000dc`abfedd80 00007fff`7508812f python39!_PyEval_EvalFrameDefault+0x194d [C:\A\34\s\Python\ceval.c # 3487]
15 000000dc`abfee0b0 00007fff`750888e5 python39!_PyEval_EvalFrameDefault+0x183f [C:\A\34\s\Python\ceval.c # 3504]
16 000000dc`abfee3e0 00007fff`750888e5 python39!_PyEval_EvalFrameDefault+0x1ff5 [C:\A\34\s\Python\ceval.c # 3518]
17 000000dc`abfee710 00007fff`750888e5 python39!_PyEval_EvalFrameDefault+0x1ff5 [C:\A\34\s\Python\ceval.c # 3518]
18 000000dc`abfeea40 00007fff`750854c4 python39!_PyEval_EvalFrameDefault+0x1ff5 [C:\A\34\s\Python\ceval.c # 3518]
I cannot find any information on the console message, nor the int3. I have tried full purge and reinstall/update of Python.
Can anyone offer some direction to help, or know the cause?
Edit: Modified that PyModule_pymod function to display Pre and Post msg to console. Debug build exceptions, Release appears not to:
PyMODINIT_FUNC PyInit_pymod(void) {
printf("Pre-PyModule_Create\n");
PyObject *obj = PyModule_Create(&pymodmodule);
printf("Post-PyModule_Create\n");
return obj;
}
Release:
E:\projects\pymod\build\Release>python -c "import pymod"
Pre-PyModule_Create
Post-PyModule_Create
Debug:
E:\projects\pymod\build\Debug>python -c "import pymod"
Pre-PyModule_Create
Fatal Python error: _PyInterpreterState_GET: the function must be called with the GIL held, but the GIL is released (the current Python thread state is NULL)
Python runtime state: unknown

I ran into the same issue as you, and while debugging TLS structures, I noticed that Visual Studio had loaded python310.dll instead of python310_d.dll.
To make a long story short, when you define the _DEBUG macro, Python.h will use python310_d.lib, so you need to run the debug version of Python:
python_d -c "import pymod"
I was confused further by the fact that I did not have this issue while using pybind11. As it turned out, pybind11 undefines the _DEBUG macro while including Python.h, so it is always using python310.lib instead of python310_d.lib, even for debugging builds.
As I do not see an option to use the python_d interpreter in Visual Studio, I ended up using the release library for debugging builds using the following code:
#if defined(_MSC_VER) && defined(_DEBUG)
#undef _DEBUG
#include <Python.h>
#define _DEBUG 1
#else
#include <Python.h>
#endif
As a sidenote, when you link against python310_d.dll, you will have to name your debug module pymod_d.pyd instead of pymod.pyd.

rmarkdown::render() failed to generate pdf, but the rstudio 'knitr' buttons works

I use tineytex package and have no problem knitting a pdf when I click on the knit button in rStudio. However, when I called rmarkdown::render() with the same .Rmd file as input, only an intermeidate .tex file was generated in the target folder.
Below is my code.
rmarkdown::render(input = "C:/Users/sqhuang/Pdf.Rmd",
output_format = "pdf_document",
output_file = "test.pdf",
output_dir = ot_path)
Below is the error messages that I got.
processing file: Pdf.Rmd
|......... | 14%
ordinary text without R code
|................... | 29%
label: setup (with options)
List of 1
$ echo: logi FALSE
|............................ | 43%
ordinary text without R code
|..................................... | 57%
label: cars
|.............................................. | 71%
ordinary text without R code
|........................................................ | 86%
label: pressure (with options)
List of 1
$ echo: logi FALSE
|.................................................................| 100%
ordinary text without R code
output file: Pdf.knit.md
"C:/PROGRA~1/Pandoc/pandoc" +RTS -K512m -RTS Pdf.utf8.md --to latex
--from markdown+autolink_bare_uris+ascii_identifiers+tex_math_single_backslash
--output pandoc15f027594a1c.tex --template "C:\PROGRA~1\R\R-36~1.1\library\RMARKD~1\rmd\latex\DEFAUL~3.TEX"
--highlight-style tango --pdf-engine pdflatex --variable graphics=yes --variable "geometry:margin=1in" --variable "compact-title:yes" This is pdfTeX, Version 3.14159265-2.6-1.40.20 (TeX Live 2019/W32TeX)
(preloaded format=pdflatex) restricted \write18 enabled. warning:
kpathsea: //enterprise2/Users4$/Sqhuang_a/My Documents: Unrecognized
variable construct $/'. warning: kpathsea:
//enterprise2/Users4$/Sqhuang_a/My Documents: Unrecognized variable
construct$/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents: Unrecognized variable construct $/'. warning: kpathsea:
//enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-config/web2c/pdftex: Unrecognized variable
construct$/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-var/web2c/pdftex: Unrecognized variable
construct $/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-home/web2c/pdftex: Unrecognized variable
construct$/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-config/web2c: Unrecognized variable construct
$/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-var/web2c: Unrecognized variable construct
$/'. warning: kpathsea: //enterprise2/Users4$/Sqhuang_a/My
Documents/.TinyTeX/texmf-home/web2c: Unrecognized variable construct
`$/'. entering extended mode Error: Failed to compile
\endeavor/apps_doc$/Applications/0_Support/GCS/Brett - Other
Duties/BAR/Steph/AL/Jul/test_report.tex. See
https://yihui.name/tinytex/r/#debugging for debugging tips.

I think I've figured out the problem (unfortunately, I seem to have ran into a further issue, but I think I've resolved this one anyway).
Basically, kpathsea is searching everywhere in your system for the needed packages. This means it's trying to search in directories that it can't read properly (because of the $ symbol amongst others). The solution was to find the texmf.cnf file which looks something like this:
% (Public domain.)
% This texmf.cnf file should contain only your personal changes from the
% original texmf.cnf (for example, as chosen in the installer).
%
% That is, if you need to make changes to texmf.cnf, put your custom
% settings in this file, which is .../texlive/YYYY/texmf.cnf, rather than
% the distributed file (which is .../texlive/YYYY/texmf-dist/web2c/texmf.cnf).
% And include *only* your changed values, not a copy of the whole thing!
%
TEXMFLOCAL = $SELFAUTOPARENT/texmf-local
TEXMFHOME = $HOME/.TinyTeX/texmf-home
TEXMFVAR = $HOME/.TinyTeX/texmf-var
TEXMFCONFIG = $HOME/.TinyTeX/texmf-config
OSFONTDIR = $SystemRoot/fonts//
ASYMPTOTE_HOME = $TEXMFCONFIG/asymptote
% Prefer external Perl for third-party TeXLive Perl scripts
% Was set to 1 if at install time a sufficiently recent Perl was detected.
TEXLIVE_WINDOWS_TRY_EXTERNAL_PERL = 0
TEXMFAUXTREES = C:/PROGRA~1/R/R-36~1.3/share/texmf,
When searching, kpathsea replaces the $HOME with a directory, which contains a $, e.g., for me $HOME gets replaced by my default Documents folder (which is on a shared network drive).
I replaced anywhere that had a $HOME/.TinyTeX with ./TinyTeX, which would make kpathsea search in the directory where I have actually installed the TinyTex (and, more specifically to not search in the default directory.)
Hope this helps anybody having this issue and provides some help for developers on how to maybe stop this problem in the future.

Can't Build Container Optimized OS | sed: -e expression #2, char 60: unknown option to `s' [duplicate]

This question already has answers here:
Using different delimiters in sed commands and range addresses
(3 answers)
Closed 1 year ago.
When following their documentation and running ./build_packages --board=lakitu, I get the following error.
Using ubuntu 16.0.4. Looks like a sed syntax error? Am I missing a variable? Does sed work differently in different operating systems or is something wrong with their documentation/scripts? Followed their documentation to the t and didn't add or configure anything. Waiting for a successful run first.
Looking at similar questions, they all appear to be syntax errors...
* Package: sys-boot/shim-14.0.20180308-r4
* Repository: lakitu
* USE: abi_x86_64 amd64 elibc_glibc kernel_linux userland_GNU
* FEATURES: network-sandbox sandbox splitdebug userpriv usersandbox
* Running stacked hooks for pre_pkg_setup
* sysroot_build_bin_dir ... [ ok ]
* Running stacked hooks for post_pkg_setup
* python_eclass_hack ... [ ok ]
* Running stacked hooks for pre_src_unpack
* python_multilib_setup ... [ ok ]
>>> Unpacking source...
>>> Unpacking shim-14.0.20180308.tar.gz to /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work
>>> Source unpacked in /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work
* Running stacked hooks for post_src_unpack
* asan_init ... [ ok ]
>>> Preparing source in /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a ...
>>> Source prepared.
>>> Configuring source in /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a ...
>>> Source configured.
>>> Compiling source in /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a ...
make -j8 ARCH=x86_64 CROSS_COMPILE=x86_64-cros-linux-gnu- EFI_INCLUDE=/build/lakitu//usr/include/efi EFI_PATH=/build/lakitu//usr/lib64 ARCH_LDFLAGS=--no-experimental-use-relr COMMITID=79cdb2a215de2ace7d1bf0a294165a04b726c70a DEFAULT_LOADER=\\\\grub-lakitu.efi shimx64.efi
sed -e "s,##VERSION##,14," \
-e "s,##UNAME##,Linux x86_64 Intel Xeon E312xx (Sandy Bridge, IBRS update) GenuineIntel GNU/Linux," \
-e "s,##COMMIT##,79cdb2a215de2ace7d1bf0a294165a04b726c70a," \
< /build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a/version.c.in > version.c
sed: -e expression #2, char 60: unknown option to `s'
make: *** [Makefile:183: version.c] Error 1
* ERROR: sys-boot/shim-14.0.20180308-r4::lakitu failed (compile phase):
* emake failed
*
* If you need support, post the output of `emerge --info '=sys-boot/shim-14.0.20180308-r4::lakitu'`,
* the complete build log and the output of `emerge -pqv '=sys-boot/shim-14.0.20180308-r4::lakitu'`.
* The complete build log is located at '/build/lakitu/tmp/portage/logs/sys-boot:shim-14.0.20180308-r4:20190531-002217.log'.
* For convenience, a symlink to the build log is located at '/build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/temp/build.log'.
* The ebuild environment file is located at '/build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/temp/environment'.
* Working directory: '/build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a'
* S: '/build/lakitu/tmp/portage/sys-boot/shim-14.0.20180308-r4/work/shim-79cdb2a215de2ace7d1bf0a294165a04b726c70a'

There's a , after Bridge
-e "s,##UNAME##,Linux x86_64 Intel Xeon E312xx (Sandy Bridge, IBRS update) GenuineIntel GNU/Linux," \
Change to
-e "s###UNAME###Linux x86_64 Intel Xeon E312xx (Sandy Bridge, IBRS update) GenuineIntel GNU/Linux#" \

perl Inline cpp not working windows 32 bit

I'm using perl Inline::CPP with this sample code from cpan documentation
use Inline CPP;
print "9 + 16 = ", add(9, 16), "\n";
print "9 - 16 = ", subtract(9, 16), "\n";
__END__
__CPP__
int add(int x, int y) {
return x + y;
}
int subtract(int x, int y) {
return x - y;
}
The Error Log
C:\strawberry\perl\bin\perl.exe C:\strawberry\perl\lib\ExtUtils\xsubpp -type
"C:\strawberry\perl\lib\ExtUtils\typemap" inline_pl_172d.xs > inline_pl_172
sc && C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e mv -- inline_pl_
d.xsc inline_pl_172d.c
Didn't find a 'MODULE ... PACKAGE ... PREFIX' line
g++ -c -s -O2 -DWIN32 -DPERL_TEXTMODE_SCRIPTS -DPERL_IMPLICIT_CONTEX
DPERL_IMPLICIT_SYS -fno-strict-aliasing -mms-bitfields -s -O2 -DVERSION=\
00\" -DXS_VERSION=\"0.00\" "-IC:\strawberry\perl\lib\CORE" inline_pl_17
c
inline_pl_172d.xs:28:2: error: 'MODULE' does not name a type
dmake: Error code 129, while making 'inline_pl_172d.o'
A problem was encountered while attempting to compile and install your Inline
CPP code. The command that failed was:
dmake > out.make 2>&1
The build directory was:
D:\university\phd\data\datamail\Chordata2\_Inline\build\inline_pl_172d
To debug the problem, cd to the build directory, and inspect the output files
at D:\university\phd\data\datamail\Chordata2\inline.pl line 0.
...propagated at C:/strawberry/perl/site/lib/Inline/C.pm line 772.
INIT failed--call queue aborted.
If the package is not installed well on my machine How to know and fix it ?

The your code works for me without modification once I installed Inline::CPP from CPAN...
c:\Perl>
c:\Perl>perl StackOverflow.pl
Set up gcc environment - 3.4.5 (mingw-vista special r3)
9 + 16 = 25
9 - 16 = -7
c:\Perl>
This is perl 5, version 16, subversion 3 (v5.16.3) built for MSWin32-x86-multi-thread
(with 1 registered patch, see perl -V for more detail)
Copyright 1987-2012, Larry Wall
Binary build 1603 [296746] provided by ActiveState http://www.ActiveState.com
Built Mar 13 2013 11:29:21
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl". If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
c:\Perl>
This is on a Win7 32 bit system running ActivePerl 5.16.3 multi-thread and Inline::CPP 0.46 using the default install settings in the Inline::CPP module setup. From the looks of things Perl appears to be using GCC 3.4.5 as the module compiler...
c:\Perl>gcc -v
Reading specs from C:/Perl/site/lib/auto/MinGW/bin/../lib/gcc/mingw32/3.4.5/specs
Configured with: ../gcc-3.4.5-20060117-3/configure --with-gcc --with-gnu-ld --with-gnu-as --host=mingw32 --target=mingw32 --prefix=/mingw --enable-threads --disable-nls --enable-languages=c,c++,f77,ada,objc,java --disable-win32-registry --disable-shared --enable-s
jlj-exceptions --enable-libgcj --disable-java-awt --without-x --enable-java-gc=boehm --disable-libgcj-debug --enable-interpreter --enable-hash-synchronization --enable-libstdcxx-debug
Thread model: win32
gcc version 3.4.5 (mingw-vista special r3)
c:\Perl>
The make utility used is dmake 4.11...
c:\Perl>dmake -V MAKE_VERSION
dmake.exe - Version 4.11-20080107-SHAY (Windows / MS Visual C++)
Copyright (c) 1990,...,1997 by WTI Corp.
Default Configuration:
MAXLINELENGTH := 32766
MAXPROCESSLIMIT := 4
MAXPROCESS := 1
.IMPORT .IGNORE: DMAKEROOT
.MAKEFILES : makefile.mk makefile
.SOURCE : .NULL
DMAKEROOT *= $(ABSMAKECMD:d)startup
MAKESTARTUP := $(DMAKEROOT)\startup.mk
Please read the NEWS file for the latest release notes.
c:\Perl>
Complete Inline::CPP CPAN module install log...
c:\Perl>cpan
Set up gcc environment - 3.4.5 (mingw-vista special r3)
cpan shell -- CPAN exploration and modules installation (v2.00)
Enter 'h' for help.
cpan> install Inline::CPP
Reading 'C:\Perl\cpan\Metadata'
Database was generated on Mon, 28 Oct 2013 11:08:37 GMT
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/01mailrc.txt.gz
Reading 'C:\Perl\cpan\sources\authors\01mailrc.txt.gz'
............................................................................DONE
Fetching with LWP:
http://ppm.activestate.com/CPAN/modules/02packages.details.txt.gz
Reading 'C:\Perl\cpan\sources\modules\02packages.details.txt.gz'
Database was generated on Tue, 05 Nov 2013 20:53:02 GMT
Warning: This index file is 40 days old.
Please check the host you chose as your CPAN mirror for staleness.
I'll continue but problems seem likely to happen.
............................................................................DONE
Fetching with LWP:
http://ppm.activestate.com/CPAN/modules/03modlist.data.gz
Reading 'C:\Perl\cpan\sources\modules\03modlist.data.gz'
............................................................................DONE
Writing C:\Perl\cpan\Metadata
Running install for module 'Inline::CPP'
Running make for D/DA/DAVIDO/Inline-CPP-0.46.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/D/DA/DAVIDO/Inline-CPP-0.46.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/D/DA/DAVIDO/CHECKSUMS
Checksum for C:\Perl\cpan\sources\authors\id\D\DA\DAVIDO\Inline-CPP-0.46.tar.gz ok
Scanning cache C:\Perl/cpan/build for sizes
...........................................................................-DONE
DEL(1/2): C:\Perl\cpan\build\Math-Polynomial-1.005-ahaC2G
DEL(2/2): C:\Perl\cpan\build\Math-Polynomial-1.005-ahaC2G.yml
Inline-CPP-0.46/
Inline-CPP-0.46/Makefile.PL
Inline-CPP-0.46/META.yml
Inline-CPP-0.46/README
Inline-CPP-0.46/MANIFEST
Inline-CPP-0.46/TESTED
Inline-CPP-0.46/Changes
Inline-CPP-0.46/MANIFEST.SKIP
Inline-CPP-0.46/t/
Inline-CPP-0.46/t/03prefix.t
Inline-CPP-0.46/t/02basic.t
Inline-CPP-0.46/t/14changes.t
Inline-CPP-0.46/t/11rewrite_config.t
Inline-CPP-0.46/t/04charptr.t
Inline-CPP-0.46/t/07perlcritic.t
Inline-CPP-0.46/t/00load_prereqs.t
Inline-CPP-0.46/t/01fn_cans.t
Inline-CPP-0.46/t/10kwalitee.t
Inline-CPP-0.46/t/06fn_regress.t
Inline-CPP-0.46/t/08cppguess.t
Inline-CPP-0.46/t/09pod_coverage.t
Inline-CPP-0.46/t/13version_numbers.t
Inline-CPP-0.46/t/12custom_libs.t
Inline-CPP-0.46/t/05pod.t
Inline-CPP-0.46/grammar/
Inline-CPP-0.46/grammar/Makefile.PL
Inline-CPP-0.46/grammar/grammar.pm
Inline-CPP-0.46/grammar/t/
Inline-CPP-0.46/grammar/t/03inline.t
Inline-CPP-0.46/grammar/t/02scope.t
Inline-CPP-0.46/grammar/t/10struct.t
Inline-CPP-0.46/grammar/t/01nherit.t
Inline-CPP-0.46/grammar/t/05virt.t
Inline-CPP-0.46/grammar/t/09purevt.t
Inline-CPP-0.46/grammar/t/11minhrt.t
Inline-CPP-0.46/grammar/t/15stvar.t
Inline-CPP-0.46/grammar/t/14const.t
Inline-CPP-0.46/grammar/t/00pod_coverage.t
Inline-CPP-0.46/grammar/t/16varlst.t
Inline-CPP-0.46/grammar/t/13vararg.t
Inline-CPP-0.46/grammar/t/12retlst.t
Inline-CPP-0.46/grammar/t/17memberarray.t
Inline-CPP-0.46/grammar/t/06deflt.t
Inline-CPP-0.46/grammar/t/07static.t
Inline-CPP-0.46/grammar/t/08anon.t
Inline-CPP-0.46/grammar/t/04const.t
Inline-CPP-0.46/CPP.pm
Inline-CPP-0.46/META.json
Inline-CPP-0.46/lib/
Inline-CPP-0.46/lib/Inline/
Inline-CPP-0.46/lib/Inline/CPP/
Inline-CPP-0.46/lib/Inline/CPP/Config.pm
Inline-CPP-0.46/lib/Inline/CPP.pod
CPAN.pm: Building D/DA/DAVIDO/Inline-CPP-0.46.tar.gz
Set up gcc environment - 3.4.5 (mingw-vista special r3)
Warning: prerequisite Inline version 0.53 not found. at Makefile.PL line 49.
Warning: prerequisite Inline::C version 0.53 not found. at Makefile.PL line 49.
This will configure and build Inline::C++.
What default C++ compiler would you like to use? [C:\Perl\site\bin\g++.exe]
What default libraries would you like to include? [-lstdc++]
Detected <iostream> style headers. ('.h' not needed.)
Checking if your kit is complete...
Looks good
Warning: prerequisite Inline 0.53 not found. We have 0.52.
Warning: prerequisite Inline::C 0.53 not found. We have 0.52.
Writing Makefile for Inline::CPP::grammar
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Inline::CPP
Writing MYMETA.yml and MYMETA.json
---- Unsatisfied dependencies detected during ----
---- DAVIDO/Inline-CPP-0.46.tar.gz ----
Inline::C [requires]
Inline [requires]
Running make test
Delayed until after prerequisites
Running make install
Delayed until after prerequisites
Running install for module 'Inline::C'
Running make for S/SI/SISYPHUS/Inline-0.53.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/S/SI/SISYPHUS/Inline-0.53.tar.gz
Fetching with LWP:
http://ppm.activestate.com/CPAN/authors/id/S/SI/SISYPHUS/CHECKSUMS
Checksum for C:\Perl\cpan\sources\authors\id\S\SI\SISYPHUS\Inline-0.53.tar.gz ok
Inline-0.53/
Inline-0.53/C/
Inline-0.53/C/C-Cookbook.pod
Inline-0.53/C/C.pm
Inline-0.53/C/C.pod
Inline-0.53/C/Changes
Inline-0.53/C/lib/
Inline-0.53/C/lib/Inline/
Inline-0.53/C/lib/Inline/C/
Inline-0.53/C/lib/Inline/C/ParseRecDescent.pm
Inline-0.53/C/lib/Inline/C/ParseRegExp.pm
Inline-0.53/C/Makefile.PL
Inline-0.53/C/README
Inline-0.53/C/rt/
Inline-0.53/C/rt/grammars.t
Inline-0.53/C/t/
Inline-0.53/C/t/00init.t
Inline-0.53/C/t/01syntax.t
Inline-0.53/C/t/02config.t
Inline-0.53/C/t/03typemap.t
Inline-0.53/C/t/04perlapi.t
Inline-0.53/C/t/05xsmode.t
Inline-0.53/C/t/06parseregexp.t
Inline-0.53/C/t/07typemap_multi.t
Inline-0.53/C/t/08taint.t
Inline-0.53/C/t/08taint_1.p
Inline-0.53/C/t/08taint_2.p
Inline-0.53/C/t/08taint_3.p
Inline-0.53/C/t/09parser.t
Inline-0.53/C/t/10callback.t
Inline-0.53/C/t/11default_readonly.t
Inline-0.53/C/t/12taint_old.t
Inline-0.53/C/t/14void_arg.t
Inline-0.53/C/t/15ccflags.t
Inline-0.53/C/t/16ccflagsex.t
Inline-0.53/C/t/17prehead.t
Inline-0.53/C/t/18quote_space.t
Inline-0.53/C/t/19INC.t
Inline-0.53/C/t/20eval.t
Inline-0.53/C/t/21read_DATA.t
Inline-0.53/C/t/22read_DATA_2.t
Inline-0.53/C/t/23validate.t
Inline-0.53/C/t/bar/
Inline-0.53/C/t/bar/find_me_in_bar.h
Inline-0.53/C/t/foo/
Inline-0.53/C/t/foo/find_me_in_foo.h
Inline-0.53/C/t/prehead.in
Inline-0.53/C/t/soldier_typemap
Inline-0.53/C/t/typemap
Inline-0.53/Changes
Inline-0.53/Inline-API.pod
Inline-0.53/Inline-FAQ.pod
Inline-0.53/Inline-Support.pod
Inline-0.53/Inline.pm
Inline-0.53/Inline.pod
Inline-0.53/kobes.log
Inline-0.53/lib/
Inline-0.53/lib/Inline/
Inline-0.53/lib/Inline/denter.pm
Inline-0.53/lib/Inline/Foo.pm
Inline-0.53/lib/Inline/MakeMaker/
Inline-0.53/lib/Inline/MakeMaker/Changes
Inline-0.53/lib/Inline/MakeMaker.pm
Inline-0.53/Makefile.PL
Inline-0.53/MANIFEST
Inline-0.53/modules/
Inline-0.53/modules/Math/
Inline-0.53/modules/Math/Simple/
Inline-0.53/modules/Math/Simple/Changes
Inline-0.53/modules/Math/Simple/Makefile.PL
Inline-0.53/modules/Math/Simple/MANIFEST
Inline-0.53/modules/Math/Simple/Simple.pm
Inline-0.53/modules/Math/Simple/test.pl
Inline-0.53/README
Inline-0.53/symbols.perl
Inline-0.53/t/
Inline-0.53/t/00init.t
Inline-0.53/t/01usages.t
Inline-0.53/t/02config.t
Inline-0.53/t/03errors.t
Inline-0.53/t/04create.t
Inline-0.53/t/05files.t
Inline-0.53/t/06rewrite_config.p
Inline-0.53/t/06rewrite_config.t
Inline-0.53/t/07rewrite2_config.p
Inline-0.53/t/07rewrite2_config.t
Inline-0.53/t/file
Inline-0.53/ToDo
CPAN.pm: Building S/SI/SISYPHUS/Inline-0.53.tar.gz
Set up gcc environment - 3.4.5 (mingw-vista special r3)
Checking if your kit is complete...
Looks good
Inline::C is packaged with Inline.pm because it is the most commonly used
Inline Language Support Module (ILSM).
See also: Inline::ASM, ::Awk, ::BC, ::Basic, ::Befunge, ::CPP (C++), ::CPR,
::Foo, ::Guile, ::Java, ::Octave, ::PERL, ::Python, ::Ruby, ::TT,
::Tcl and ::WebChat.
Config.pm indicates that your version of Perl was built with this C compiler:
C:\Perl\site\bin\gcc.exe
I have located this compiler on your system.
Do you want to install Inline::C? [y] y
Writing Makefile for Inline::C
Writing MYMETA.yml and MYMETA.json
Writing Makefile for Inline
Writing MYMETA.yml and MYMETA.json
Fixing Makefile for MSWin32
cp Inline.pod blib\lib\Inline.pod
cp lib/Inline/MakeMaker/Changes blib\lib\Inline\MakeMaker\Changes
cp lib/Inline/denter.pm blib\lib\Inline\denter.pm
AutoSplitting blib\lib\Inline\denter.pm (blib\lib\auto\Inline\denter)
cp Inline.pm blib\lib\Inline.pm
AutoSplitting blib\lib\Inline.pm (blib\lib\auto\Inline)
cp lib/Inline/Foo.pm blib\lib\Inline\Foo.pm
cp Inline-API.pod blib\lib\Inline-API.pod
cp lib/Inline/MakeMaker.pm blib\lib\Inline\MakeMaker.pm
cp Inline-FAQ.pod blib\lib\Inline-FAQ.pod
cp Inline-Support.pod blib\lib\Inline-Support.pod
cp lib/Inline/C/ParseRegExp.pm ..\blib\lib\Inline\C\ParseRegExp.pm
cp C-Cookbook.pod ..\blib\lib\Inline\C-Cookbook.pod
cp C.pm ..\blib\lib\Inline\C.pm
cp C.pod ..\blib\lib\Inline\C.pod
cp lib/Inline/C/ParseRecDescent.pm ..\blib\lib\Inline\C\ParseRecDescent.pm
SISYPHUS/Inline-0.53.tar.gz
C:\Perl\site\bin\dmake.exe -- OK
Running make test
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t
t/00init.t ............. ok
t/01usages.t ........... ok
t/02config.t ........... ok
t/03errors.t ........... ok
t/04create.t ........... ok
t/05files.t ............ ok
t/06rewrite_config.t ... ok
t/07rewrite2_config.t .. ok
All tests successful.
Files=8, Tests=19, 15 wallclock secs ( 0.11 usr + 0.06 sys = 0.17 CPU)
Result: PASS
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, '..\blib\lib', '..\blib\arch')" t/*.t
t/00init.t .............. ok
t/01syntax.t ............ ok
t/02config.t ............ ok
t/03typemap.t ........... ok
t/04perlapi.t ........... ok
t/05xsmode.t ............ ok
t/06parseregexp.t ....... ok
t/07typemap_multi.t ..... ok
t/08taint.t ............. ok
t/09parser.t ............
This test could take a couple of minutes to run
t/09parser.t ............ ok
t/10callback.t .......... ok
t/11default_readonly.t .. ok
t/12taint_old.t ......... Skipped - applies only to perl 5.6.x
t/12taint_old.t ......... ok
t/14void_arg.t .......... ok
t/15ccflags.t ........... ok
t/16ccflagsex.t ......... ok
t/17prehead.t ........... ok
t/18quote_space.t ....... ok
t/19INC.t ............... ok
t/20eval.t .............. ok
t/21read_DATA.t ......... ok
t/22read_DATA_2.t ....... ok
t/23validate.t .......... ok
All tests successful.
Files=23, Tests=71, 165 wallclock secs ( 0.12 usr + 0.05 sys = 0.17 CPU)
Result: PASS
SISYPHUS/Inline-0.53.tar.gz
C:\Perl\site\bin\dmake.exe test -- OK
Running make install
Prepending C:\Perl\cpan\build\Inline-0.53-JPPUvK/blib/arch C:\Perl\cpan\build\Inline-0.53-JPPUvK/blib/lib to PERL5LIB for 'install'
Installing C:\Perl\site\lib\Inline.pm
Installing C:\Perl\site\lib\Inline.pod
Installing C:\Perl\site\lib\Inline\C.pm
Installing C:\Perl\site\lib\Inline\MakeMaker.pm
Installing C:\Perl\site\lib\Inline\MakeMaker\Changes
Appending installation info to C:\Perl\lib/perllocal.pod
SISYPHUS/Inline-0.53.tar.gz
C:\Perl\site\bin\dmake.exe install -- OK
Inline is up to date (0.53).
Running make for D/DA/DAVIDO/Inline-CPP-0.46.tar.gz
Has already been unwrapped into directory C:\Perl\cpan\build\Inline-CPP-0.46-QMmSMq
CPAN.pm: Building D/DA/DAVIDO/Inline-CPP-0.46.tar.gz
cp lib/Inline/CPP/Config.pm blib\lib\Inline\CPP\Config.pm
cp CPP.pm blib\lib\Inline\CPP.pm
cp lib/Inline/CPP.pod blib\lib\Inline\CPP.pod
cp grammar.pm ..\blib\lib\Inline\CPP\grammar.pm
DAVIDO/Inline-CPP-0.46.tar.gz
C:\Perl\site\bin\dmake.exe -- OK
Running make test
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t/*.t
t/00load_prereqs.t ..... # $Config{osname}: MSWin32
# $Config{cc}: C:\Perl\site\bin\gcc.exe
# $Config{gccversion}: 3.4.5 (mingw-vista special r3)
t/00load_prereqs.t ..... ok
t/01fn_cans.t .......... ok
t/02basic.t ............ ok
t/03prefix.t ........... ok
t/04charptr.t .......... ok
t/05pod.t .............. skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/06fn_regress.t ....... ok
t/07perlcritic.t ....... skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/08cppguess.t ......... # ExtUtils::CppGuess not installed. This set of tests and diagnostics
# is more thorough when ExtUtils::CppGuess can be loaded.
# Detected basic defaults (Strawberry, etc.).
#
# Compiler guess:
t/08cppguess.t ......... 1/2 # Makefile.PL approach: [C:\Perl\site\bin\g++.exe].
#
# Linker guess:
# Makefile.PL approach: [-lstdc++].
t/08cppguess.t ......... ok
t/09pod_coverage.t ..... skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/10kwalitee.t ......... skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/11rewrite_config.t ... skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/12custom_libs.t ...... ok
t/13version_numbers.t .. skipped: Author Test: Set $ENV{RELEASE_TESTING} to a true value to run.
t/14changes.t .......... skipped: Author tests skipped. Set $ENV{RELEASE_TESTING} to run
All tests successful.
Files=15, Tests=29, 22 wallclock secs ( 0.09 usr + 0.05 sys = 0.14 CPU)
Result: PASS
C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, '..\blib\lib', '..\blib\arch')" t/*.t
t/00pod_coverage.t .. ok
t/01nherit.t ........ ok
t/02scope.t ......... ok
t/03inline.t ........ ok
t/04const.t ......... ok
t/05virt.t .......... ok
t/06deflt.t ......... ok
t/07static.t ........ ok
t/08anon.t .......... ok
t/09purevt.t ........ ok
t/10struct.t ........ ok
t/11minhrt.t ........ ok
t/12retlst.t ........ ok
t/13vararg.t ........ ok
t/14const.t ......... ok
t/15stvar.t ......... ok
t/16varlst.t ........ ok
t/17memberarray.t ... ok
All tests successful.
Test Summary Report
-------------------
t/11minhrt.t (Wstat: 0 Tests: 38 Failed: 0)
TODO passed: 28-31
Files=18, Tests=79, 89 wallclock secs ( 0.14 usr + 0.00 sys = 0.14 CPU)
Result: PASS
DAVIDO/Inline-CPP-0.46.tar.gz
C:\Perl\site\bin\dmake.exe test -- OK
Running make install
Prepending C:\Perl\cpan\build\Inline-CPP-0.46-QMmSMq/blib/arch C:\Perl\cpan\build\Inline-CPP-0.46-QMmSMq/blib/lib to PERL5LIB for 'install'
Installing C:\Perl\site\lib\Inline\CPP.pm
Installing C:\Perl\site\lib\Inline\CPP.pod
Installing C:\Perl\site\lib\Inline\CPP\Config.pm
Installing C:\Perl\site\lib\Inline\CPP\grammar.pm
Appending installation info to C:\Perl\lib/perllocal.pod
DAVIDO/Inline-CPP-0.46.tar.gz
C:\Perl\site\bin\dmake.exe install -- OK
cpan> exit
Lockfile removed.
c:\Perl>
Hopes this helps.