I tried to uninstall following this guide: https://guide.macports.org/chunked/installing.macports.uninstalling.html#installing.macports.uninstalling.users
When I put in the last command lines in terminal it does not work and says:
zsh: no matches found: /Library/LaunchDaemons/org.macports.*
What's the issue here?
I opened /opt/local/bin and there's still files in there.
At the bottom of the page you will find the following note:
"Depending on which version of MacPorts you have and which ports you have installed, not all of the above paths will exist on your system; this is OK."
Apparently you do not have any files in that directory. Try removing /Library/LaunchDaemons/org.macports.* from the command.
Related
I am trying to install simplecpp from this website "https://www.cse.iitb.ac.in/~ranade/simplecpp/"
I am following the mac version.
but when I try to cp file "/usr/include/xlocale.h ./" it gives an error "cp: /usr/include/xlocale.h: No such file or directory"
Please, someone, install and tells me if I am doing wrong or there is an error with the commands given in the website.
Run locate xlocale.h to find where that file exists on your machine, and copy it from one of those locations. For example on some Macs it is in /Library/Developer/CommandLineTools/SDKs/usr/include/xlocale.h if you have XCode and its "Command Line Tools" installed.
I'm using MinGW64 via an MSYS2 download and am currently trying to install the Solar Geometry 2 library (http://www.oie.mines-paristech.fr/Valorisation/Outils/Solar-Geometry/) for use. I'm following their install README, which states to navigate to the directory and "configure" (I've been typing "./configure". However, when I do so, I get the following message in my terminal:
$ ./configure
configure: loading site script /mingw64/etc/config.site
/mingw64/etc/config.site: line 13: config.site:13: default build_alias set to x6_64-w64-mingw32: command not found
/mingw64/etc/config.site: line 20: config.site:20: default prefix set to /mingw4: No such file or directory
configure: error: cannot find install-sh or install.sh in . ./.. ./../..
When I initially installed MSYS2 I set up the etc/fstab file as recommended. However, I'm quite new to MSYS so I'm assuming I botched something in my setup. I haven't edited anything in the config.site file mentioned in the errors, so I'm wondering if it's something in there.
Any help is greatly appreciated, thank you
No where in the directions for "Solar Geometry" do I see reference to MSys or MSys2.
I suggest you install the compiler toolchain and base development file. No idea if you editing /etc/fstab will cause problems. I do not normmaly edit it!
Install MinGW Package build packages. You might need more packages installed.
pacman -S --needed base-devel mingw-w64-x86_64-toolchain
I'm trying to install Mathtex on my Ubuntu 16.04 server for my engineering wiki. It has been a nightmare, just as it was in the past when I tried this.
First, I've installed mathtex via apt-get. That complains of a missing directory. After manually creating those directory it moves on to complain of another. Finally complains of a missing cache directory. I create the cache just like the others and mathtex still complains that the cache directory is missing...
Then I attempt to install via the instructions on the website (http://www.forkosh.com/mathtex.html). In other words, install the dependencies LaTeX and dvipng. Then compile the program using cc (although I use gcc). I've gotten this to work in previous installations of Ubuntu - 12.04 or 14.04 - but can't find those instructions anymore. I was paying for a service until this summer when they went out of business.
Here is the compile line:
cc mathtex.c –DLATEX=\"$(which latex)\" –DDVIPNG=\"$(which dvipng)\" –o mathtex.cgi
Here is the return:
cc: error: –DLATEX="/usr/bin/latex": No such file or directory
cc: error: –DDVIPNG="/usr/bin/dvipng": No such file or directory
cc: error: –o: No such file or directory
I've also tried replacing $(which latex) with $(which pdftex) (/usr/bin/latex is a symbolic link to /usr/bin/pdftex) and /usr/bin/pdftex, /usr/bin/tex, /usr/bin, and /usr/bin/. Same result, the error says there is no such file or directory for all of them.
Googling this error only returns help for people who can't get Ubuntu to recognize gcc as the cc compiler. That's not my issue though.
Did you copy that command from a document? You have the wrong kind of dashes on your options.
Delete the – (en dash) and replace it with -.
Okay so i'm trying to install Homebrew, so that I can I can install nodejs and npm. However I'm using this command from brew.sh;
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Once I install Homebrew It keeps returning this error
It appears Homebrew is already installed. If your intent is to reinstall you
should do the following before running this installer again:
ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall)"
The current contents of /usr/local are bin CODEOFCONDUCT.md etc lib libexec Library LICENSE.txt README.md sbin share .git .github .gitignore
omz_urlencode:42: failed to load module `zsh/regex': dlopen(/usr/local/Cellar/zsh/5.2/lib/zsh/regex.so, 9): image not found
omz_urlencode:42: -regex-match not available for regex'
I honestly have no idea what's happening here. I'm not sure If I have to symlink Homebrew up or what. But I have tried everything I know so far (which isn't much). If anyone could be kind enough to give me instructions as what too look for to solve the issue, I'm all ears.
Thank you for listening!
It seems it's a bug that have been corrected in recent version of OMZ, you should update it.
You get the output:
zsh: command not found: homebrew
Because homebrew is not a command. Try brew -v instead.
To resolve:
Warning: node-5.10.1 already installed, it's just not linked
Use brew link node
Okay so I think I have made some progress, It may have been for some weird reason I didn't have permission writes to run the 'brew link < package > ' so i ran the following command:
'sudo chown -R /usr/local/share/systemtap/tapset && brew doctor'
Once I ran 'brew link node' it successfully created 7 symlinks for the node directory on the following path;
'Linking /usr/local/Cellar/node/5.10.1... 7 symlinks created'
However, when I installed live-server via npm; I typed 'live-server -v' and it again returned 'zsh: command not found: live-server'. In addition to this it keeps telling me I have 'unbrewed dylibs':
Warning: Unbrewed dylibs were found in /usr/local/lib.
If you didn't put them there on purpose they could cause problems when
building Homebrew formulae, and may need to be deleted.
Unexpected dylibs:
/usr/local/lib/libociei.dylib
So im still unsure what the exact issue is.
P.S. Apologies for not posting this correctly, as im trying to see where I can seperate it into commands like you corrected in the first post, if you could link me to a post where it tells me how to use it properly i'll be more than happy to read it.
Thanks,
When I use gdb xxx, while loading, this is the result:
dl-debug.c:74: No such file or directory.
dl-debug.c:74: No such file or directory.
dl-debug.c:74: No such file or directory.
dl-debug.c:74: No such file or directory.
dl-debug.c:74: No such file or directory.
lots of it, how can I solve it?
I've searched this in the internet, but all the answers are not the resolution.
Some might recommended that apt-get source glibc or apt-get install libc-source, but NO HELP.
I've tried to find /usr | grep dl-debug.c, but, this file is not on my Linux.
Any help?
I've solved this problem.
Firstly, use "apt-get install eglibc-source" to get the source file, while "glibc-source" is not a valid package.
Secondly, locate your source file .tar.xz (mine is in /usr/src), uncompressed it.
Finally, run gdb, and type "directory /usr/src/glibc-xxx(your location)/elf", and "dl-debug.c" is in this directory.
Also, adding "directory /usr/src/glibc-xxx(your location)/elf" in ~/.gdbinit might help u a lot.
It worked great! The file ~/.gdbinit didn't exist in my case. I create it with:
echo "directory /usr/src/glibc/eglibc-2.11.1/elf" >> ~/.gdbinit
Having done this I didn't had to type it in anymore. I tested it with gdb and gdb -tui.
Maybe this helps also for this bug:https://bugs.launchpad.net/ubuntu/+source/gdb/+bug/571356
I am running on Ubuntu 3.13.0-66 with gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04)