I was going to install libevent on CentOS 7. So I went to https://libevent.org/ to download the newest version of libevent(libevent-2.1.12-stable.tar.gz). The operations were:
mkdir -r /opt/libevent
cd /opt/libevent
tar -zxvf libevent-2.1.12-stable.tar.gz
cd libevent-2.1.12-stable
./configure --prefix=/usr/local/libevent
make
make install
When I run ./configure --prefix=/usr/local/libevent, it gave some errors below:
checking that generated files are newer than configure... done
configure: creating ./config.status
./configure: line 19401: cannot create temp file for here-document: No such file or directory
configure: error: write failure creating ./config.status
And line 19401 of configure is:
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
The value of $CONFIG_STATUS was empty:
[root#centos libevent-2.1.12-stable]# echo $CONFIG_STATUS
[root#centos libevent-2.1.12-stable]#
Does anybody know how to solve it?
Related
I want to install aclocal -I m4 in ubuntu 14.04 when i run the command its showing
First installed
sudo apt-get install autotools-dev
then,
sudo apt-get install aclocal
same error also getting.
I needed to install all of the following packages to get aclocal running:
apt install automake
apt install autoconf
apt install m4
apt install perl
apt install libtool
This was the error message that I received when I tried to install ssdeep:
WARNING: 'aclocal-1.13' is missing on your system.
You should only need it if you modified 'acinclude.m4' or
'configure.ac' or m4 files included by 'configure.ac'.
The 'aclocal' program is part of the GNU Automake package:
<http://www.gnu.org/software/automake>
It also requires GNU Autoconf, GNU m4 and Perl in order to run:
<http://www.gnu.org/software/autoconf>
<http://www.gnu.org/software/m4/>
<http://www.perl.org/>
Makefile:426: recipe for target 'aclocal.m4' failed
make: *** [aclocal.m4] Error 127
/bin/sh: 1: libtoolize: not found
/usr/bin/m4:aclocal.m4:1069: cannot open `m4/libtool.m4': No such file or directory
/usr/bin/m4:aclocal.m4:1070: cannot open `m4/ltoptions.m4': No such file or directory
/usr/bin/m4:aclocal.m4:1071: cannot open `m4/ltsugar.m4': No such file or directory
/usr/bin/m4:aclocal.m4:1072: cannot open `m4/ltversion.m4': No such file or directory
/usr/bin/m4:aclocal.m4:1073: cannot open `m4/lt~obsolete.m4': No such file or directory
autom4te: /usr/bin/m4 failed with exit status: 1
automake: error: autoconf failed with exit status: 1
Failed while building ssdeep lib with configure and make.
Retry with autoreconf ...
Failed to reconfigure the project build.
Install it from source, you avoid a lot of troubles compiling other software in the future. aclocal package does NOT exist, and is part of automake package.
$ sudo apt-get install automake
Will install aclocal
I recommend compiling from script, it will update to the latest version
#!/bin/bash
VERSION=1.15
wget ftp://ftp.gnu.org/gnu/automake/automake-${VERSION}.tar.gz &> /dev/null
if [ -f "automake-${VERSION}.tar.gz" ]; then
tar -xzf automake-${VERSION}.tar.gz
cd automake-${VERSION}/
./configure
make && make install
echo -e "\e[1;39m[ \e[1;32mOK\e[39m ] automake-${VERSION} installed\e[0;39m"
else
echo -e "\e[1;39m[ \e[31mError\e[39m ] cannot fetch file from ftp://ftp.gnu.org/gnu/automake/ \e[0;39m"
exit 1
fi
I'm attempting to build nxlog with some updated libraries:
Latest APR (1.5.2)
Non-Heartbleed vulnerable OpenSSL sources
PCRE 8.37
Zlib 1.2.8
After building all the dependencies I'm a little stuck on getting nxlogs to build, specifically I'm stuck on the step where I run ./configure
At first it couldn't find apr-1-config, so I added /local/apr/bin to the path.
Then it couldn't fine libapr-1 so I added /local/apr/lib to the path, this is where the problems started. When APR built there wasn't a "libapr-1" file in /local/apr/lib, only libapr-1.a, libapr-1.la, libapr-1.dll.a.
Did I build APR incorrectly?
I'm trying to build this on windows
List of steps to get where I am:
Install MINGW using MinGW Installation Manager
Add packages:
mingw-developer-toolkit
mingw-base
mingw-expat bin
mingw32-libexpat dev
msys-libopenssl dev
msys-automake
msys-autoconf
Setup msys fstab (c:/mingw /mingw)
Install Python (2.5)
Add Python and mingw to system path (C:\Python25;C:\MinGW\bin;C:\MinGW\msys\1.0\bin)
Get and build APR source (I could not get APR iconv to compile)
Download:
http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.11.tar.gz
http://mirror.nexcess.net/apache//apr/apr-1.5.2-win32-src.zip
http://mirror.nexcess.net/apache//apr/apr-util-1.5.4-win32-src.zip
http://sourceforge.net/projects/pcre/files/pcre/8.37/pcre-8.37.zip/download
http://zlib.net/zlib128.zip
Build:
Extract all files to c:\mingw\msys\1.0\src
Compile libiconv
cd libiconv-1.11
./configure CFLAGS="-O2 -s -mms-bitfields -march=i686" CXXFLAGS="-O2 -s -mms-bitfields -march=i686"
make && make install
Compile APR
cd apr
./buildconf
./configure CFLAGS="-O0 -s -mms-bitfields -march=i686" CXXFLAGS="-O0 -s -mms-bitfields -march=i686"
make && make install
cd ..
Compile APR-UTIL
cd apr-util-1.5.4
./buildconf --with-apr=/usr/src/apr-1.5.2
./configure CFLAGS="-O2 -s -mms-bitfields -march=i686" CXXFLAGS="-O2 -s -mms-bitfields -march=i686" --with-apr=/usr/src/apr-1.5.2
make && make install
cd ..
Compile PCRE
cd pcre-.37
./configure
make && make install
(make threw an error corrected with make clean, autoconf -i --force, started back at step 1)
cd ..
Compile ZLIB
cd zlib-1.2.8
make -f win32/Makefile.gcc
Compile nxlog
cd nxlog-ce-2.8.1248
./configure
This is where the problems began. First it couldn't find apr-1-config.
Fixed by adding /local/apr/bin to path.
Now it can't find libapr-1, adding /local/apr/lib to the path doesn't help. There is no libapr-1 file in the MinGW directory tree; thought I do see libapr-1.a libapr-1.la libapr.dll.a. Ideas? I assume this is supposed to be a script file to respond to queries about the library's interfaces?
I'm using fpm to create a deb package, but when I install that deb package, it is installed into the wrong location, my fpm command is:
fpm -f -s "dir" -t "deb" -a "all" -n "my_project" -v 1 -C "/tmp/tmpjWTuVp" /tmp/tmpjWTuVp/my_project
The folder i want to package up exists at /tmp/tmpjWTuVp/my_project, but every time i install it with:
dpkg -i my_package.deb
it installs it into /tmp/tmpjWTuVp/my_project, ideally i'd like it to install into /var/lib/my_project. I have tried --installdir and --root with my dpkg command, but it complains with cannot access archive: No such file or directory
Other information:
I'm installing onto an ubuntu box
I'm very new to deb packaging, so may have missed something obvious
I'm not bound to fpm and happy to hear other viable suggestions
inside my_project is a python virtualenv and my django project
I have randomly found the answer to this immediately after writing this question...
basically the last, unnamed argument within the fpm command can contain an equals separator which defines the directory to come from, and to install to, so the command I ended up using was:
fpm -f -s "dir" -t "deb" -a "all" -n "my_project" -v 1 -C "/tmp/tmpjWTuVp" my_project=/var/lib/my_project
Notice the my_project=/var/lib/my_project, the left side is the directory name of my project (relative, because I used -C to change directory to /tmp/tmpjWTuVp before looking for packages) and on the right side is where I want to install to on the remote machine...
I'm trying to get openmp to run in my program on Mavericks, however when I try to compile using the flag -fopenmp I get the following error:
ld: library not found for -lgomp
clang: error: linker command failed with exit code 1 (use -v to see invocation)
The command I am running is:
gcc myProgram.cpp -fopenmp -o myProgram
Also, when I run gcc I get Clang warnings which I find to be very strange. And looking into /usr/bin/gcc it does not appear to link to Clang.
Any suggestions on how to fix my Clang errors and get openmp to compile?
The gcc command in the latest Xcode suite is no longer the GCC frontend to LLVM (based on the very old GCC 4.2.1) but rather a symlink to clang. Clang does not (yet) support OpenMP. You have to install separately another version of GCC, e.g. by following this tutorial or by using any of the available software package management systems like MacPorts and Homebrew.
I just recently attacked this problem and have scripted the process of getting everything working based on the official instructions.
The script will download everything into ~/code for easy maintenance and will append the correct environment variables to your ~/.profile file. For advanced users, pick a nice location you want the lib, bin and include installed and move them manually. The script depends on knowing the latest OpenMP runtime from Intel, which can be altered at the top of the script.
The script should work out of the box with vanilla Mavericks, except for one small problem. In the OpenML runtime make script, it does not reliably accept clang when specified and continues with the default GCC. As such, if you don't have GCC installed (which is not normal on out of the box Mavericks), it will fail to build. To fix this, you must comment out two lines (as noted in the script) based on the libomp_20131209_oss.tgz build of OpenMP. Newer builds of OpenML might break this script, so use at your own peril on newer versions.
Simply save this script into a file, run 'chmod +x filename.sh', and run './filename.sh' from terminal. It will take a while to build LLVM and Clang, so be patient.
EDIT: This script will most likely fail on Yosemite and I am having issues using the built clang2 after the update to the dev builds of OSX 10.10.
INTEL_OPENMP_LATEST_BUILD_LINK=https://www.openmprtl.org/sites/default/files/libomp_20131209_oss.tgz
DEST_FOLDER = ~/code
CLANG_INCLUDE=${DEST_FOLDER}/llvm/include
CLANG_BIN=${DEST_FOLDER}/llvm/build/Debug+Asserts/bin
CLANG_LIB=${DEST_FOLDER}/llvm/build/Debug+Asserts/lib
OPENMP_INCLUDE=${DEST_FOLDER}/libomp_oss/exports/common/include
OPENMP_LIB=${DEST_FOLDER}/libomp_oss/exports/mac_32e/lib.thin
mkdir ${DEST_FOLDER}
cd ${DEST_FOLDER}
git clone https://github.com/clang-omp/llvm
git clone https://github.com/clang-omp/compiler-rt llvm/projects/compiler-rt
git clone -b clang-omp https://github.com/clang-omp/clang llvm/tools/clang
cd llvm
mkdir build
cd build
../configure
make
cd Debug+Asserts/bin
mv clang clang2
rm -rf clang++
ln -s clang2 clang2++
echo "LLVM+Clang+OpenMP Include Path : " ${CLANG_INCLUDE}
echo "LLVM+Clang+OpenMP Bin Path : " ${CLANG_BIN}
echo "LLVM+Clang+OpenMP Lib Path : " ${CLANG_LIB}
cd ${DEST_FOLDER}
curl ${INTEL_OPENMP_LATEST_BUILD_LINK} -o libomp_oss_temp.tgz
gunzip -c libomp_oss_temp.tgz | tar xopf -
rm -rf libomp_oss_temp.tgz
cd libomp_oss
echo "You need to do one or two things:"
echo "1.) [Required] Comment out line 433 from libomp_oss/src/makefile.mk"
echo "2.) [Optional] If you do not have GCC installed (not normal on vanilla Mavericks), you must comment out lines 450-451 in libomp_oss/tools/check-tools.pl. Have you done this or want to compile anyway?"
select yn in "Yes" "No"; do
case $yn in
Yes ) make compiler=clang; break;;
No ) exit;;
esac
done
echo "OpenMP Runtime Include Path : " ${OPENMP_INCLUDE}
echo "OpenMP Runtime Lib Path : " ${OPENMP_LIB}
(echo 'export PATH='${CLANG_BIN}':$PATH';
echo 'export C_INCLUDE_PATH='${CLANG_INCLUDE}':'${OPENMP_INCLUDE}':$C_INCLUDE_PATH';
echo 'export CPLUS_INCLUDE_PATH='${CLANG_INCLUDE}':'${OPENMP_INCLUDE}':$CPLUS_INCLUDE_PATH';
echo 'export LIBRARY_PATH='${CLANG_LIB}':'${OPENMP_LIB}':$LIBRARY_PATH';
echo 'export DYLD_LIBRARY_PATH='${CLANG_LIB}':'${OPENMP_LIB}':$DYLD_LIBRARY_PATH}') >> ~/.profile
source ~/.profile
echo "LLVM+Clang+OpenMP is now accessible through [ clang2 ] via terminal and does not conflict with Apple's clang"
If you are running homebrew you can fix this problem by calling:
brew install clang-omp
The compiler will be available under clang-omp++ name
Just worked through this problem. Here's the answer plus how to get it worked with Xcode.
Grab the latest version of openMP runtime library from
https://www.openmprtl.org/download
unzip and compile it by
mkdir build && cd build && cmake .. && make && sudo make install
install it by
sudo cp ./libiomp5.dylib /usr/lib/
sudo cp ./omp.h /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/
Grab openmp/clang from Git following the instructions on http://clang-omp.github.io/
compile openmp/clang
cd llvm && mkdir build && cd build && ../configure --enable-optimized && make -j
sudo make install
normally it would install clang/clang++ into /usr/local/bin, we need replace the Apple clang with our version
cd /usr/bin
sudo mv clang clang-apple
sudo mv clang++ clang++-apple
sudo ln -s /usr/local/bin/clang ./clang
sudo ln -s /usr/local/bin/clang++ ./clang++
cd /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
sudo mv clang clang-apple
sudo mv clang++ clang++-apple
sudo ln -s /usr/local/bin/clang ./clang
sudo ln -s /usr/local/bin/clang++ ./clang++
cd /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/include/c++/v1
sudo mv -f * ../../
Create a project in Xcode, using the Hello World code on clang-openmp website for test. After created, add "-fopenmp" to Custom Compiler Flags -> Other C Flags in project settings; add /usr/lib/libiomp5.dylib to the build phases of project (project settings -> Build Phases -> Drag /usr/lib/libiomp5.dylib into Link Binary with Libraries)
It should work. Yosemite + Xcode 6 is tested.
Note: the custom clang is NOT as stable as Apple's. Switch back if you meet strange instruction error after compiled.
This is again one these nice Debian packaging problems.
I have an app that installs to /opt (the install location is actually irrelevant, the same problem occurs with /usr):
OPT=1 ./configure && make && make install
I took a working Debian packaging from my other app, that used CMake, but the configuring, build and installation were similar. I modified the rules file a bit to build my new app:
build: build-stamp
build-stamp:
dh_testdir
# Add here commands to compile the package.
OPT=1 ./configure && $(MAKE) -j$(shell cat /proc/cpuinfo | grep processor | wc -l)
touch build-stamp
I left the installation part untouched:
install: build
dh_testdir
dh_testroot
dh_prep
dh_installdirs
# Add here commands to install the package into debian/<packagename>
DESTDIR=`pwd`/debian/`dh_listpackages` $(MAKE) install
Now, the problem is that when I try to build the package, it tries to install
to the real /opt and crashes:
mkdir: cannot create directory ‘/opt/snm’: Permission denied
make[1]: *** [install_target] Error 1
make: *** [install] Error 2
dpkg-buildpackage: error: fakeroot debian/rules binary gave error exit status 2
debuild: fatal error at line 1361:
dpkg-buildpackage -rfakeroot -D -us -uc -i -b failed
I just can't figure out why my packaging doesn't work with my new app. Or alternatively, why it DID work with the other app :)
It seems that my install step was just ignoring the DESTDIR given by the Debian rules file.