I'm facing a issue, status code is:401
"creating ec2 instance: authfailure: aws was not able to validate the provided access credentials │ status code: 401, request id: d103063f-0b26-4b84-9719-886e62b0e2b1"
the instance code:
resource "aws_instance" "test-EC2" {
instance_type = "t2.micro"
ami = "ami-07ffb2f4d65357b42"
}
I have checked the AMI region still not working
any help would be appreciated
I am looking for a way to create and destroy tokens via the management console provided by AWS. I am learning about terraform AWS provider which requires an access key, a secret key and a token.
As stated in the error message :
creating ec2 instance: authfailure: aws was not able to validate the provided access credentials │ status code: 401, request id: d103063f-0b26-4b84-9719-886e62b0e2b1".
It is clear that terraform is not able to authenticate itself using terraform AWS-provider.
You have to have a provider block in your terraform configuration to use one of the supported ways to get authenticated.
provider "aws" {
region = var.aws_region
}
In general, the following are the ways to get authenticated to AWS via the AWS-terraform provider.
Parameters in the provider configuration
Environment variables
Shared credentials files
Shared configuration files
Container credentials
Instance profile credentials and region
For more details, please take a look at: https://registry.terraform.io/providers/hashicorp/aws/latest/docs#authentication-and-configuration
By default, if you are already programmatically signed in to your AWS account AWS-terraform provider will use those credentials.
For example:
If you are using aws_access_key_id and aws_secret_access_key to authenticate yourself then you might have a profile for these credentials. you can check this info in your $HOME/.aws/credentials config file.
export the profile using the below command and you are good to go.
export AWS_PROFILE="name_of_profile_using_secrets"
If you have a SSO user for authentication
Then you might have a sso profile available in $HOME/.aws/config In that case you need to sign in with the respective aws sso profile using the below command
aws sso login --profile <sso_profile_name>
If you don't have a SSO profile yet you can also configure it using the below commands and then export it.
aws configure sso
[....] # configure your SSO
export AWS_PROFILE=<your_sso_profile>
Do you have an aws provider defined in your terraform configuration?
provider "aws" {
region = var.aws_region
profile = var.aws_profile
}
if you are running this locally, please have an IAM user profile set (use aws configure) and export that profile in your current session.
aws configure --profile xxx
export AWS_PROFILE=xxx
once you have the profile set, this should work.
If you are running this deployment in any pipleine like Github Action, you could also make use of OpenId connect to avoid any accesskey and secretkey.
Please find the detailed setup for OpenId connect here.
We would like to integrate Azure Active Directory (Azure AD) with AWS EKS Identity Provider Configuration using OIDC.
Currently, I am not sure about Terraform AWS provider module does have the feature of OIDC integration with Azure AD directly.
I am looking similar configure of terraform AWS provider module.
For example:
oidc {
client_id = “spn:xxxxxxxxxxxx”
groups_claim = “xxx”
groups_prefix = “aad:”
identity_provider_config_name = “eks-oidc”
issuer_url = “xxxxxx”
username_claim = “xxx”
username_prefix = “aad:”
}
The above configuration template getting from the below link for a different provider.
https://registry.terraform.io/providers/atlantis-eeveebank/aws/latest/docs/resources/eks_identity_provider_config
how can I achieve this through terraform?
Is it the only way to configure the OIDC identity provider to our cluster using eksctl?
https://docs.amazonaws.cn/en_us/eks/latest/userguide/authenticate-oidc-identity-provider.html
Regards,
Nataraj.R
Looks like this is supported via Cognito?
https://aws.amazon.com/blogs/containers/introducing-oidc-identity-provider-authentication-amazon-eks/
https://registry.terraform.io/providers/hashicorp/aws/latest/docs/resources/cognito_identity_provider
Might be worth having a look around there and seeing if that meets your needs.
Ian.
I am deploying OIDC provider to GCP via terraform. I am using this doc as instruction to set it up:
https://registry.terraform.io/providers/hashicorp/google/latest/docs/resources/identity_platform_default_supported_idp_config
It works and I am able to deploy an identity to GCP identity platform. The configuration looks like below:
resource "google_identity_platform_default_supported_idp_config" "idp_config" {
enabled = true
idp_id = "playgames.google.com"
client_id = "client-id"
client_secret = "secret"
}
The problem I have is that I can't find where I can add Authorised Domains. When I open this identity on GCP console, I can add the domain on the right panel like below screenshot. But how can I configure them via terraform?
Terraform now supports cloud run as documented here,
and I'm trying the example code below.
resource "google_cloud_run_service" "default" {
name = "tftest-cloudrun"
location = "us-central1"
provider = "google-beta"
metadata {
namespace = "my-project-name"
}
spec {
containers {
image = "gcr.io/cloudrun/hello"
}
}
}
Although it deploys the sample hello service with no error, when I access to the auto-generated URL, it returns 403(Forbidden) response.
Is it possible to create public cloud run api using terraform?
(When I'm creating the same service using GUI, GCP provides "Allow unauthenticated invocations" option under "Authentication" section, but there seems to be no equivalent option in terraform document...)
Just add the following code to your terraform script, which will make it publicly accessable
data "google_iam_policy" "noauth" {
binding {
role = "roles/run.invoker"
members = [
"allUsers",
]
}
}
resource "google_cloud_run_service_iam_policy" "noauth" {
location = google_cloud_run_service.default.location
project = google_cloud_run_service.default.project
service = google_cloud_run_service.default.name
policy_data = data.google_iam_policy.noauth.policy_data
}
You can also find this here
Here the deployment is only based on Knative serving spec. Cloud Run managed implements these specs but have its own internal behavior, like role check linked with IAM (not possible with Knative and a K8S cluster, this is replaced by Private/Public service). The namespace on Cloud Run managed is the projectId, a workaround to identify the project for example, not a real K8S namespace.
So, the latest news that I have from Google (I'm Cloud Run Alpha Tester) which tells they are working with Deployment Manager and Terraform for integrating Cloud Run in them. I don't have deadline, sorry.
I am configuring S3 backend through terraform for AWS.
terraform {
backend "s3" {}
}
On providing the values for (S3 backend) bucket name, key & region on running "terraform init" command, getting following error
"Error configuring the backend "s3": No valid credential sources found for AWS Provider. Please see https://terraform.io/docs/providers/aws/index.html for more information on providing credentials for the AWS Provider
Please update the configuration in your Terraform files to fix this error
then run this command again."
I have declared access & secret keys as variables in providers.tf. While running "terraform init" command it didn't prompt any access key or secret key.
How to resolve this issue?
When running the terraform init you have to add -backend-config options for your credentials (aws keys). So your command should look like:
terraform init -backend-config="access_key=<your access key>" -backend-config="secret_key=<your secret key>"
I also had the same issue, the easiest and the secure way is to fix this issue is that configure the AWS profile. Even if you properly mentioned the AWS_PROFILE in your project, you have to mention it again in your backend.tf.
my problem was, I have already set up the AWS provider in the project as below and it is working properly.
provider "aws" {
region = "${var.AWS_REGION}"
profile = "${var.AWS_PROFILE}"
}
but end of the project I was trying to configure the S3 backend configuration file. therefore I have run the command terraform init and I also got the same error message.
Error: error configuring S3 Backend: no valid credential sources for S3 Backend found.
Note that is not enough for the terraform backend configuration. you have to mention the AWS_PROFILE in the backend file as well.
Full Solution
I'm using the terraform latest version at this moment. it's v0.13.5.
please see the provider.tf
provider "aws" {
region = "${var.AWS_REGION}"
profile = "${var.AWS_PROFILE}" # lets say profile is my-profile
}
for example your AWS_PROFILE is my-profile
then your backend.tf should be as below.
terraform {
backend "s3" {
bucket = "my-terraform--bucket"
encrypt = true
key = "state.tfstate"
region = "ap-southeast-2"
profile = "my-profile" # you have to give the profile name here. not the variable("${var.AWS_PROFILE}")
}
}
then run the terraform init
I've faced a similar problem when renamed profile in AWS credentials file. Deleting .terraform folder, and running terraform init again resolved the problem.
If you have set up custom aws profile already, use the below option.
terraform init -backend-config="profile=your-profile-name"
If there is no custom profile,then make sure to add access_key and secret_key to default profile and try.
Don't - add variables for secrets. It's a really really bad practice and unnecessary.
Terraform will pick up your default AWS profile, or use whatever AWS profile you set AWS_PROFILE too. If this in AWS you should be using an instance profile. Roles can be done too.
If you hardcode the profile into your tf code then you have to have the same profile names where-ever you want to run this script and change it for every different account its run against.
Don't - do all this cmdline stuff, unless you like wrapper scripts or typing.
Do - Add yourself a remote_state.tf that looks like
terraform {
backend "s3" {
bucket = "WHAT-YOU-CALLED-YOUR-STATEBUCKET"
key = "mykey/terraform.tfstate"
region = "eu-west-1"
}
}
now when your terraform init:
Initializing the backend...
Successfully configured the backend "s3"! Terraform will automatically
use this backend unless the backend configuration changes.
The values in the provider aren't relevant to the perms for the remote_state and could even be different AWS accounts (or even another cloud provider).
Had the same issue and I was using export AWS_PROFILE as I always had. I checked my credentials which were correct.
Re-running aws configure fixed it for some reason.
I had same issue and below is my usecase.
AWS account 1: Management account (IAM user created here and this user will assume role into Dev and Prod account)
AWS account 2: Dev environment account (Role is created here for the trusted account in this case Management account user)
AWS account 3: Prod environment account (Role is created here for the trusted account in this case Management account user)
So I created a dev-backend.conf and prod-backend.conf file with the below content. The main point that fixed this issue is passing the "role_arn" value in S3 backend configuration
Defining below content in dev-backend.conf and prod-backend.conf files
bucket = "<your bucket name>"
key = "< your key path>"
region = "<region>"
dynamodb_table = "<db name>"
encrypt = true
profile = "< your profile>" # this profile has access key and secret key of the IAM user created in Management account
role_arn = "arn:aws:iam::<dev/prod account id>:role/<dev/prod role name >"
Terraform initialise with dev s3 bucket config from local state to s3 state
$ terraform init -reconfigure -backend-config="dev-backend.conf"
Terraform apply using dev environment variables file
$ terraform apply --var-file="dev-app.tfvars"
Terraform initialise with prod s3 bucket config from dev s3 bucket to prod s3 bucket state
$ terraform init -reconfigure -backend-config="prod-backend.conf"
Terraform apply using prod environment variables file
$ terraform apply --var-file="prod-app.tfvars"
I decided to put an end to this issue for once and for all, since there is a bunch of different topics about this same issue. This issue mainly arises because of different forms of authentication used while developing locally versus running a CI/CD pipeline. People tend to mix different authentication options together without taking into account the order of precedence.
When running locally you should definitely use the aws cli, since you don’t wanna have to set access keys every time you run a build. If you happen to work with multiple accounts locally you can tell the aws cli to switch profiles:
export AWS_PROFILE=my-profile
When you want to run (the same code) in a CI/CD pipeline (e.g. Github Actions, CircleCI), all you have to do is export the required environment variables within your build pipeline:
export AWS_ACCESS_KEY_ID="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
export AWS_SECRET_ACCESS_KEY="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
export AWS_REGION="eu-central-1"
This only works if you do not set any hard-coded configuration within the provider block. Because the AWS Terraform provider documentation learns us the order of authentication. Parameters in the provider configuration are evaluated first, then come environment variables.
Example:
terraform {
required_providers {
aws = {
source = "hashicorp/aws"
version = "~> 4.0"
}
}
}
provider "aws" {}
terraform {
backend "s3" {}
}
Before you plan or apply this, you'll have to initialize the backend:
terraform init \
-backend-config="bucket=${TFSTATE_BUCKET}" \
-backend-config="key=${TFSTATE_KEY}" \
-backend-config="region=${TFSTATE_REGION}"
Best practices:
When running locally use the aws cli to authenticate. When running in a build pipeline, use environment variables to authenticate.
Keep your Terraform configuration as clean as possible, so try to avoid hard-coded settings and keep the provider block empty, so that you'll be able to authenticate dynamically.
Preferably also keep the s3 backend configuration empty and initialize this configuration from environment variables or a configuration file.
The Terraform documentation recommends including .terraform.lock.hcl in your version control so that you can discuss potential changes to your external dependencies via code review.
Setting AWS_PROFILE in a build pipeline is basically useless. Most of the times you do not have the aws cli installed during runtime. If you would somehow need this, then you should probably think of splitting this into separate build pipelines.
Personally, I like to use Terragrunt as a wrapper around Terraform. One of the main reasons is that it enables you to dynamically set the backend configuration. This is not possible in plain Terraform.
If someone is using localstack, for me only worked using this tip https://github.com/localstack/localstack/issues/3982#issuecomment-1107664517
backend "s3" {
bucket = "curso-terraform"
key = "terraform.tfstate"
region = "us-east-1"
endpoint = "http://localhost:4566"
skip_credentials_validation = true
skip_metadata_api_check = true
force_path_style = true
dynamodb_table = "terraform_state"
dynamodb_endpoint = "http://localhost:4566"
encrypt = true
}
And don't forget to add the endpoint in provider:
provider "aws" {
region = "us-east-1"
skip_credentials_validation = true
skip_requesting_account_id = true
skip_metadata_api_check = true
s3_force_path_style = true
endpoints {
ec2 = "http://localhost:4566"
s3 = "http://localhost:4566"
dynamodb = "http://localhost:4566"
}
}
in my credentials file, 2 profile names are there one after another caused the error for me. when I removed 2nd profile name this issue was resolved.
I experienced this issue when trying to apply some Terraform changes to an existing project. The terraform commands have been working fine, and I even ran worked on the project couple of hours before the issue started.
I was encountering the following errors:
❯ terraform init
Initializing modules...
Initializing the backend...
╷
│ Error: error configuring S3 Backend: IAM Role (arn:aws:iam::950456587296:role/MyRole) cannot be assumed.
│
│ There are a number of possible causes of this - the most common are:
│ * The credentials used in order to assume the role are invalid
│ * The credentials do not have appropriate permission to assume the role
│ * The role ARN is not valid
│
│ Error: NoCredentialProviders: no valid providers in chain. Deprecated.
│ For verbose messaging see aws.Config.CredentialsChainVerboseErrors
I had my organization VPN turned on when running the Terraform commands, and this caused the commands to fail.
Here's how I fixed it
My VPN caused the issue, this may not apply to everyone.
Turning off my VPN fixed it.