Hi there :) I'm struggling to add a validation regex to the URL Slug in my Content Type. I can set it manually e.g.
But I want to set it programmatically using the JS Management SDK. This is one of the things I have tried...
const mod: ContentTypeModels.IModifyContentTypeData[] = [
{
op: 'addInto',
path: '/elements/codename:page_url',
value: {
validation_regex: {
regex: '^[a-zA-Z-/]{1,60}$',
flags: 'i',
validation_message: 'URL slug must only contain (English/Latin) characters, forward slashes and hyphens',
is_active: true,
},
},
},
]
That gives me the error >> Invalid operation with index '0': Unexpected path part 'codename:page_url'
In the hope that the problem is just with the path I have tried several other permutations, without success.
Is what I want possible in place i.e. without deleting and re-adding the element? And if so how?
The addInto operation is for adding new elements, so if there is no url slug element you can add a new one and specify the regular expression:
[
{
"op": "addInto",
"path": "/elements",
"value":{
"depends_on": {
"element": {
"id": "d395c03d-2b20-4631-adc6-bc4cd9c88b0b"
}
},
"validation_regex": {
"regex": "^[a-zA-Z-/]{1,60}$",
"flags": "i",
"validation_message": "URL slug must only contain (English/Latin) characters, forward slashes and hyphens",
"is_active": true
},
"name": "some_slug",
"guidelines": null,
"is_required": false,
"type": "url_slug",
"codename": "some_slug"
}
]
For updating just regex of existing url slug element you need to use the replace operation instead:
[
{
"op": "replace",
"path": "/elements/codename:some_type/validation_regex",
"value":{
"regex": "^[a-zA-Z-/]{1,60}$",
"flags": "i",
"validation_message": "URL slug must only contain (English/Latin) characters, forward slashes and hyphens",
"is_active": true
}
}
]
You can find more info in our API reference -> https://kontent.ai/learn/reference/management-api-v2/#operation/modify-a-content-type
Related
I am setting up a flow to organize and save emails as PDF in a Dropbox folder. The first email that will arrive includes a 10 digit identification number which I extract along with an address. My flow creates a folder in Dropbox named in this format: 2023568684 : 123 Main St. Over a few weeks, additional emails arrive that I need to put into that folder. The subject always has a 10 digit number in it. I was building around each email and using functions like split, first, last, etc. to isolate the 10 digits ID. The problem is that there is no consistency in the subjects or bodies of the messages to be able to easily find the ID with that method. I ended up starting to build around each email format individually but there are way too many, not to mention the possibility of new senders or format changes.
My idea is to use List files in folder when a new message arrives which will create an array that I can filter to find the folder ID the message needs to be saved to. I know there is a limitation on this because of the 20 file limit but that is a different topic and question.
For now, how do I find a random 10 digit number in a randomly formatted email subject line so I can use it with the filter function?
For this requirement, you really need regex and at present, PowerAutomate doesn't support the use of regex expressions but the good news is that it looks like it's coming ...
https://powerusers.microsoft.com/t5/Power-Automate-Ideas/Support-for-regex-either-in-conditions-or-as-an-action-with/idi-p/24768
There is a connector but it looks like it's not free ...
https://plumsail.com/actions/request-free-license
To get around it for now, my suggestion would be to create a function app in Azure and let it do the work. This may not be your cup of tea but it will work.
I created a .NET (C#) function with the following code (straight in the portal) ...
#r "Newtonsoft.Json"
using System.Net;
using Microsoft.AspNetCore.Mvc;
using Microsoft.Extensions.Primitives;
using Newtonsoft.Json;
public static async Task<IActionResult> Run(HttpRequest req, ILogger log)
{
string requestBody = await new StreamReader(req.Body).ReadToEndAsync();
dynamic data = JsonConvert.DeserializeObject(requestBody);
string strToSearch = System.Text.Encoding.UTF8.GetString(Convert.FromBase64String((string)data?.Text));
string regularExpression = data?.Pattern;
var matches = System.Text.RegularExpressions.Regex.Matches(strToSearch, regularExpression);
var responseString = JsonConvert.SerializeObject(matches, new JsonSerializerSettings()
{
ReferenceLoopHandling = ReferenceLoopHandling.Ignore
});
return new ContentResult()
{
ContentType = "application/json",
Content = responseString
};
}
Then in PowerAutomate, call the HTTP action passing in a base64 encoded string of the content you want to search ...
The is the expression in the JSON ... base64(variables('String to Search')) ... and this is the json you need to pass in ...
{
"Text": "#{base64(variables('String to Search'))}",
"Pattern": "[0-9]{10}"
}
This is an example of the response ...
[
{
"Groups": {},
"Success": true,
"Name": "0",
"Captures": [],
"Index": 33,
"Length": 10,
"Value": "2023568684"
},
{
"Groups": {},
"Success": true,
"Name": "0",
"Captures": [],
"Index": 98,
"Length": 10,
"Value": "8384468684"
}
]
Next, add a Parse JSON action and use this schema ...
{
"type": "array",
"items": {
"type": "object",
"properties": {
"Groups": {
"type": "object",
"properties": {}
},
"Success": {
"type": "boolean"
},
"Name": {
"type": "string"
},
"Captures": {
"type": "array"
},
"Index": {
"type": "integer"
},
"Length": {
"type": "integer"
},
"Value": {
"type": "string"
}
},
"required": [
"Groups",
"Success",
"Name",
"Captures",
"Index",
"Length",
"Value"
]
}
}
Finally, extract the first value that you find which matches the regex pattern. It returns multiple results if found so if you need to, you can do something with those.
This is the expression ... #{first(body('Parse_JSON'))?['value']}
From this string ...
We're going to search for string 2023568684 within this text and we're also going to try and find 8384468684, this should work.
... this is the result ...
Don't have a Premium PowerAutomate licence so can't use the HTTP action?
You can do this exact same thing using the LogicApps service in Azure. It's the same engine with some slight differences re: connectors and behaviour.
Instead of the HTTP, use the Azure Functions action.
In relation to your action to fire when an email is received, in LogicApps, it will poll every x seconds/minutes/hours/etc. rather than fire on event. I'm not 100% sure which email connector you're using but it should exist.
Dropbox connectors exist, that's no problem.
You can export your PowerAutomate flow into a LogicApps format so you don't have to start from scratch.
https://learn.microsoft.com/en-us/azure/logic-apps/export-from-microsoft-flow-logic-app-template
If you're concerned about cost, don't be. Just make sure you use the consumption plan. Costs only really rack up for these services when the apps run for minutes at a time on a regular basis. Just keep an eye on it for your own mental health.
TO get the function URL, you can find it in the function itself. You have to be in the function ...
I am trying to get the value for the first group match of a pattern entity from the json response of Watson Assistant. The pattern is a simple regex to recognize sequences of numbers: ([0-9]+)
The json response looks like this:
"entity": "ID",
"location": [
18,
23
],
"value": "id",
"confidence": 1.0,
"groups": [
{
"group": "group_0",
"location": [
18,
23
]
}
]
},
{
"entity": "sys-number",
"location": [
18,
23
],
"value": "12345",
"confidence": 1.0,
"metadata": {
"numeric_value": 12345.0
}
}
]
So, the group is matched alright, but the field "value" is populated with the String literal from the entity config. I would expected to find the actual value there (which is the one the value field of the next entity, sys-number).
How do I need to change the config so that the value is included as-is in the value field (or somewhere else) and so that I don't have to extract the entity from the text string using the location values? Is it possible at all?
Thanks a lot
Cheers,
Martin
To access value of pattern based entity, you can either use <? #entity_name.literal ?> or <? #entity_name.groups[0] ?> - if there are more groups captured. You can find more info in the doc: https://cloud.ibm.com/docs/services/assistant?topic=assistant-entities
I have what seems to be a very simple problem though I can't get it to work.
I have a token stream of words and I want to remove any token that is a single word e.g. [the quick, brown, fox] should be outputted as [the quick].
I've tried using pattern_capture token filters and used many types of patterns but it only generates new tokens, and doesn't remove old ones.
Here is the analyzer I've built (abbreviated for clarity)
"analyzer": {
"job_analyzer": {
"type": "custom",
"tokenizer": "whitespace",
"char_filter": [
"some_custom_char_filter"
],
"filter": [
other filters....,
"dash_drop",
"trim",
"unique",
"drop_single_word"
]
}
},
"char_filter": {...},
"filter": {
"dash_drop": {
"type": "pattern_capture",
"preserve_original": false,
"patterns": [
"([^-]+)\\s?(?!-.+)",
"- (.+)"
]
},
"drop_single_word": {
"type": "pattern_capture",
"preserve_original": false,
"patterns": [**nothing here works**]
}
}
}
I know I'm using a whitespace tokenzier that breaks sentences into words, but not shown here is the use of shingles to create new nGrams.
The purpose of the dash_drop filter is used to split sentences with - into tokens without the - so for example: my house - my rules would split into [my house, my rules].
Any help is greatly apperciated.
I have a JSON with format variables in it, similar to string format, and I'd like to be able to load it with the variables replaced by actual values.
For example, if the JSON is:
[
{
"role": "President",
"name": "{first_name}",
"age": "{first_age}"
},
{
"role": "Vice President",
"name": "{second_name}",
"age": "{second_age}"
}
]
And the dictionary I'd like to format with is:
{"first_name": "Bob", "first_age": "50", "second_name": "Bill", "second_age": "35"}
I'd like to get:
[
{
"role": "President",
"name": "Bob",
"age": "50"
},
{
"role": "Vice President",
"name": "Bill",
"age": "35"
}
]
I tried converting the JSON to a string, using format, and then turning it back to a list of dictionaries:
from ast import literal_eval
literal_eval(str(raw_json).format(**json_params))
But the dictionaries' curly brackets confuse the format function and give me a KeyError exception. I suppose I could replace every pair of curly brackets which don't have a variable name between them with double curly brackets, but that's bound to go wrong and also not very Pythonic.
What would be the most elegant way to solve that issue?
What you are looking for is a templating engine.
Template is json string and data must be injected into this template.
Right tool to do that with python is jinja2
U2/Universe JSON document have the following UDOSetProperty, how would one set the value if it has multiple values? For example if I have multiple emails.
example: UDOSetProperty(udoHandle, "to", value)
"to": [
{
"email": "recipientEmail#example.com",
"name": "Recipient Name",
"type": "to"
}
],
Not sure if you are trying to add another "to" array element or if you want to add a 2nd "email" only.
So working with your example:
"to": [
{
"email": [ "recipientEmail#example.com",
"name": "Recipient Name",
"type": "to"
},
{
"email": [ "recipient2Email#example.com",
"name": "Recipient2 Name",
"type": "to"
}
],
If you wanted to create the above JSON from scratch, with the UDO commands, the steps would be:
Using the following functions should help you with what you are trying to do:
Create the initial/root object UDOCreate(UDO_OBJECT,
udoHandle)
Create the array UDOCreate(UDO_ARRAY,
thisArray)
( Use UDOCreate and UDOSetProperty to create the theEmailObject you
want to add to the array, and then add it to the object with
UDOArrayAppendItem( thisArray, theEmailObject )
Then add the array to the root object eith UDOSetProperty(udoHandle,
"TO", thisArray)
Note the part that is important is that there are several functions for dealing with arrays.
Mike
Created a program that builds the JSON with the U2 UDO functions, and added it to github:
https://github.com/RocketSoftware/multivalue-lab/blob/master/U2/Demos/UDO/JSON/The-Basics/arrayExample