Related
I have values for postage, pricing and postage service (only if). I have two choices for postage service (express and eco), price depends on a weight, but service depends on a price (fast service for items over £5, eco - under).
Service: if product price(A2)
<5=eco; >5=express
Service price(C2) by weight(B2):
<=1000gr= £2 eco or £3 express
1001-1250gr= £5 eco or £6 express
1251-5000gr=£9 eco or £11 express
Cells A2 and B2 always display a value, need a formula for C2 to display the price of service calculated by weight, but if item over £5 must display express service price if less - eco.
I have tried:
>IF(AND(OR(B2<=1000),A2<5),2,IF(AND(OR(B2>1000,B2<=1250),A2<5),5,IF(AND(OR(B2>1250,B2<=5000),A2<5),9)))
>IF(AND(OR(B2<=1000),A2<5),2)+IF(AND(OR(B2>=1001,B2<=1250),A2<5),5)+IF(AND(OR(B2>2000),A2<5),9)
Didn't start adding A2>5, because nothing works anyway! Tried many more, but no luck.
Would appreciate any help because stuck and ran out of options :(
Thanks!
There are a couple of ways to accomplish this. The preferred method is to build a small cross-reference table for your surcharges and use the VLOOKUP function to return the values.
However, this question was about hard-coded values in a conditional statement, so I will address that with a LOOKUP function and arrayed constants.
The standard formula in C2 is,
=LOOKUP(B2,{0,1001,1251},{2,5,9})+SIGN(A2)*LOOKUP(B2,{0,1001,1251},{1,1,2})
Fill down as necessary.
In the following image, custom number formats were used on columns A and B ([Color9]\Exp\r\e\s\s - [$£-809]#,##0.00;;[Color10]\Eco - [$£-809]#,##0.00; and 0\g\r_)). Weights >5000 in column B trigger a conditional formatting in column C that displays too heavy.
I keep receiving an error message that my IF statement has too many arguments. I have used this formula in other excel workbooks and it has worked. Can anyone see what the problem is? Thank you for your help!
=IF(OR(AD2="22",AD2="23",AD2="39",AD2="540",AD2="541",AD2="836"),"1",IF(OR(AD2="335",AD2="312",AD2="364",AD2="367",AD2="311",AD2="336",AD2="365",AD2="319",AD2="368",AD2="488",AD2="498",AD2="461",AD2="501",AD2="505",AD2="531",AD2="462",AD2="489",AD2="491",AD2="491",AD2="493",AD2="507",AD2="457",AD2="460",AD2="499",AD2="503",AD2="509",AD2="513",AD2="539",AD2="612",AD2="613",AD2="568",AD2="821",AD2="827",AD2="829",AD2="835",AD2="845",AD2="846",AD2="615",AD2="620",AD2="614",AD2="691",AD2="719",AD2="873",AD2="877",AD2="32",AD2="427",AD2="373",AD2="465",AD2="502",AD2="511",AD2="466",AD2="475",AD2="481",AD2="500",AD2="504",AD2="462",AD2="489",AD2="491",AD2="493",AD2="507",AD2="503",AD2="513",AD2="539",AD2="607",AD2="610",AD2="608",AD2="609",AD2="611",AD2="579",AD2="769",AD2="795",AD2="827",AD2="831",AD2="834",AD2="837",AD2="838",AD2="839",AD2="840",AD2="841",AD2="842",AD2="843",AD2="851",AD2="852",AD2="853",AD2="854",AD2="856",AD2="857",AD2="860",AD2="861",AD2="868",AD2="869",AD2="870",AD2="871"),"2",IF(OR(AD2="521",AD2="524",AD2="535",AD2="536",AD2="557",AD2="558",AD2="805"),"3","4")))
It seems that the error probably has to do with the limits of version you are using.
Since the formula contains fixed equivalences, I suggest to create a Define Name range then Vlookup cell AD2 to the table in order to obtain the related value:
=IFERROR(VLOOKUP(AD2,_Table,2,0),"4")
This formula should work fine in Excel 2007 and later (I just tested it in 2010 with no issues). The maximum number of arguments allowed in a function in these versions is 255. For earlier versions of Excel though, the max is 30. Since you did not specify which version of Excel you are using, I cannot be 100% sure if this is the problem though but I suspect this is what is going on. I recommend you upgrade to a more current version of the software, but if that's not an option you could always break out the function among multiple cells (In particular, it's the 2nd nested if statement, with ~90 parameters that is causing this...).
We’re using JCo 3.0 to connect to RFCs and read data from SAP R/3. We use one RFC RFC_READ_TABLE often and use a second custom RFC to read employee information. My questions revolve around a third RFC RSAQ_REMOTE_QUERY_CALL. I'm calling an ad-hoc query I built in SAP using this RFC but I’m not getting the expected results. The main problem is that it appears that SAP is ignoring one of my selection criteria and using what was saved in SAP when I originally built it. The date criterion stored in my ad-hoc is 6/23/2013. If I pass in 6/28/2013 from JCo, I get the same results as if I had passed 6/23/2013 from JCo.
We have built several ad-hoc queries whose only criteria is a personnel number and call them successfully using RFC RSAQ_REMOTE_QUERY_CALL.
Background on my ad-hoc query: reporting period of today, joining together four aspects of an employee’s information: their latest action (hire, rehire, etc.), organization (e.g. company), pay (e.g. pay scale level) and communication (e.g. email). The query will run every workday.
Here are my questions:
My ad-hoc has three selection criteria. The first two are simple strings. The third is a date. The date will vary each time the query runs. We are referencing the first criteria using SP$00001, the second with SP$00002 and the third with SP$00003. The order of the criteria changes from the ad-hoc to SQ01 (what was SP$00001 in the ad-hoc is now SP$00003). Shouldn’t we reference them in the order defined in the ad-hoc (e.g. SP$00001)?
The two simple string selections are using OPTION “EQ”. The date criteria is using OPTION GT (greater than). Is “GT” correct?
We have some limited accessibility to SAP. Is there a way to see which SP$ parameters are mapped to which criteria?
If my ad-hoc was saved with five criteria but four of them never change when I call the ad-hoc from JCo, do I just need to set the value of the one or do I need to set the other four as well?
Do I have to call this ad-hoc using a variant (function.getImportParameterList().setValue(“VARIANT”, “VARIANT_NAME”))?
Does the Reporting Period have an impact on the date criteria? I have tried changing the Reporting Period to be PNPBEGDA = today and PNPENDDA = today and noticed no change.
Is there a way in SAP to get a “declaration” of your ad-hoc (name, inputs, outputs, criteria)? I have looked at JCoFunction.toXml() and JCoFunctionTemplate. These are good if you want to see something at runtime before it goes to SAP, but I’m looking for something I can use on the JCo end to help me write Java code that matches the ad-hoc.
I have looked at length on the web for answers to my questions and have not found anything that is useful. If there is anything which would help me, please let me know.
Thanks,
LM
Since I don't know much about SQnn, I won't be able to answer all of your questions...
I don't know, sorry.
It should be, at least it's the usual operator for greater than.
Yes - set an external breakpoint right inside the function module and trace its execution while performing the RFC call. Warning: At least basic ABAP knowledge required.
I don't know, sorry.
I don't know either, sorry.
That would depend on the query, I suspect...
JCo won't be able to help you out there - it doesn't know about queries, it only knows function modules. There might be other RSAQ_* function modules to get that information though.
I played with setting up a variant in SQ01 for my query. I added some settings in the variant that solved my problem and answered several of my questions in my post. The main thing I did was add a dynamically calculated date as part of my criteria. Here's how:
1. In SQ01, access menu "Go To" -> "Maintain Variants".
2. Choose your variant and in subobjects, choose "Attributes" and click "Change".
3. In the displayed list, find your date criterion.
4. Choose "D" in Selection Variable, choose a comparison option (mine was GT for greater than), and a "Name of a Variable" (really, this is the type of dynamic date calculation you need).
5. Go back to the Subobjects panel, choose "Values" and click "Change".
6. Enter any other criteria you need in the "Program selections" section.
7. Save the variant.
By doing this, I don't need to pass anything into the query from JCo. Also, SAP will automatically update the date criteria you entered in step #4 above.
So to to answer my questions from my original post:
1 and 4. It doesn't matter because I'm no longer passing anything in from JCo.
2. "GT" is Greater Than.
3 and 7. If anyone knows, I'd really like to find out.
5. Use the name you as it is in SAP (step #2 above).
6. I still don't know, but it's not holding me up.
I'm posting this in case anyone out there needs this type of information. Thanks to Esti and vwegert for helping me out.
I am creating a pivot table in excel sheet by aspose.cells. I want the values to be formatted as Accounting, with a symbol, a comma and 2 decimal places. Is this possible with aspose.cells? Please suggest how to do this with Aspose.Cells and c#.
If you need Accounting number formatting for the PivotField, you may try to use the following numeric formatting using PivotField.Number attribute instead.
pivotTable.DataFields[0].Number = 43; //You may also try it with 44 if it suits your needs.
Alternatively you may try to use the following formatting string for NumberFormat custom attribute of PivotField. You may also check in MS Excel to get your desired custom strings to try with NumberFormat property.
_($* #,##0.00_);_($* (#,##0.00);_($* "-"??_);_(#_)
If you still face any confusion/issue, can you please share the sample Excel file in which you may manually set the desired number formatting for the Pivot Table fields in MS Excel, and share the file with us, so that we can test the scenario at our end.
Furthermore, can you please share the code/sample application with the template files (input, output and expected output file etc.). The files can also be shared in Aspose.Cells product support forum.
Please try using PivotField.NumberFormat property to specify his desired formatting, see the code segment below for reference:
//Specify the number formatting to the first data field added.
pivotTable.DataFields[0].NumberFormat = "$#,##0.00";
Moreover, we also recommend you use our latest version of Aspose.Cells for .NET 7.4.0 in which we made some more enhancements regarding PivotTables.
PS, I am working as Support developer / Technical Evangelist at Aspose.
I want to store rows that have 65536 columns in a Sqlite database, and I am doing that using C++ and QT.
My question is: Since the default maximum number of columns seems to be 2000 no more, how to configure this parameter from C++ and Qt?
Thank you.
The SQLLite homepage has some explanation on this:
2.Maximum Number Of Columns
The SQLITE_MAX_COLUMN compile-time parameter is used to set an upper
bound (...)
and
The default setting for SQLITE_MAX_COLUMN is 2000. You can change it
at compile time to values as large as 32767. On the other hand, many
experienced database designers will argue that a well-normalized
database will never need more than 100 columns in a table.
Like that, even if you increased it, you could only achieve half of what you want. Apart from that I can only refer to Styne666's comment on your post.