We have the following code snippet that processes eCheck charge via Authorize.net (using their SDK for .NET Framework). Every once in a while, the "response" stays null after all the retries. No error code is returned. Does anyone have an idea why this happens and how to fix it?
var request = new createTransactionRequest {transactionRequest = transactionRequest};
var controller = new createTransactionController(request);
controller.Execute();
var response = controller.GetApiResponse();
short retryCount = 2;
short i = 0;
while(response == null && i < retryCount)
{
System.Threading.Thread.Sleep(TimeSpan.FromSeconds(2));
response = controller.GetApiResponse();
i++;
}
Related
How can I Place an order from the cart and clear the cart?
I want to do this in my own controller and not by the checkout page.
I try to use this, but it doesn't work
//place order
var processPaymentRequest = HttpContext.Session.Get<ProcessPaymentRequest>("OrderPaymentInfo");
if (processPaymentRequest == null)
{
//Check whether payment workflow is required
if (_orderProcessingService.IsPaymentWorkflowRequired(cart))
return RedirectToRoute("CheckoutPaymentInfo");
processPaymentRequest = new ProcessPaymentRequest();
}
GenerateOrderGuid(processPaymentRequest);
processPaymentRequest.StoreId = _storeContext.CurrentStore.Id;
processPaymentRequest.CustomerId = _workContext.CurrentCustomer.Id;
processPaymentRequest.PaymentMethodSystemName =
_genericAttributeService.GetAttribute<string>(_workContext.CurrentCustomer,
NopCustomerDefaults.SelectedPaymentMethodAttribute,
_storeContext.CurrentStore.Id);
HttpContext.Session.Set<ProcessPaymentRequest>("OrderPaymentInfo",
processPaymentRequest);
var placeOrderResult = _orderProcessingService.PlaceOrder(processPaymentRequest);
You can use PlaceOrder method in IOrderProcessingService to place an order. CheckoutController also uses this method. For using it, you have to create a ProcessPaymentRequest by yourself. here is a sample code for such a task (I use the code placed in the CheckoutController which doing the same job):
var processPaymentRequest = HttpContext.Session.Get<ProcessPaymentRequest>("OrderPaymentInfo");
if (processPaymentRequest == null)
{
//Check whether payment workflow is required
if (_orderProcessingService.IsPaymentWorkflowRequired(cart))
return RedirectToRoute("CheckoutPaymentInfo");
processPaymentRequest = new ProcessPaymentRequest();
}
//prevent 2 orders being placed within an X seconds time frame
if (!IsMinimumOrderPlacementIntervalValid(_workContext.CurrentCustomer))
throw new Exception(_localizationService.GetResource("Checkout.MinOrderPlacementInterval"));
//place order
processPaymentRequest.StoreId = _storeContext.CurrentStore.Id;
processPaymentRequest.CustomerId = _workContext.CurrentCustomer.Id;
processPaymentRequest.PaymentMethodSystemName = _workContext.CurrentCustomer.GetAttribute<string>(
SystemCustomerAttributeNames.SelectedPaymentMethod,
_genericAttributeService, _storeContext.CurrentStore.Id);
//____this is main line of code____
var placeOrderResult = _orderProcessingService.PlaceOrder(processPaymentRequest);
if (placeOrderResult.Success)
{
HttpContext.Session.Set<ProcessPaymentRequest>("OrderPaymentInfo", null);
//do payment process:
var postProcessPaymentRequest = new PostProcessPaymentRequest
{
Order = placeOrderResult.PlacedOrder
};
_paymentService.PostProcessPayment(postProcessPaymentRequest);
if (_webHelper.IsRequestBeingRedirected || _webHelper.IsPostBeingDone)
{
//redirection or POST has been done in PostProcessPayment
return Content("Redirected");
}
return RedirectToRoute("CheckoutCompleted", new { orderId = placeOrderResult.PlacedOrder.Id });
}
I have written a webservice using spring webflux and reactive mongodb connectors, but my client side could be non spring based client.
So, how do I write a plain java code to consume flex at client side?
ServerSide code:
#GetMapping(value = "/findAll")
public Flux<Security> findAll() {
Flux<Security> flux = service.findAll();
return flux;
}
Client side code:
public static void sendRequest() {
try {
long start = System.currentTimeMillis();
for (int i = 0; i <= 100; i++) {
long start1 = System.currentTimeMillis();
URL url = new URL("http://localhost:8080/findAll/");
HttpURLConnection conn = (HttpURLConnection) url.openConnection();
conn.setRequestMethod("GET");
conn.setRequestProperty("Accept", "application/stream+json");
if (conn.getResponseCode() == 200) {
// url = new URL("http://localhost:8182/status/");
String json = "";
try (BufferedReader br = new BufferedReader(new InputStreamReader((conn.getInputStream())))) {
json = br.lines().collect(Collectors.joining());
}
conn.disconnect();
System.out.println("size of each Security: " + json.length());
ArrayList<Security> list = getListOfsecurities(json);
System.out.println(list.get(0).getIsin());
}
}
The above client side gives me an empty array.
I don't think it is possible. It's an asynchronous response.At least you have to use Java 5 Futures to invoke asynchronous response.
I am using Salesforce with DocuSign to try and create an envelope via templates.
DocuSignAPI.EnvelopeTemplates templates = soapService.requestTemplates(accountId, false);
String templateId = templates.EnvelopeTemplateDefinition[0].TemplateID;
DocuSignAPI.EnvelopeTemplate template = soapService.requestTemplate(templateId, false);
DocuSignAPI.EnvelopeInformation envelopeInformation = new DocuSignAPI.EnvelopeInformation();
envelopeInformation.Subject = 'XXXXXXXXXXX';
envelopeInformation.AccountId = accountId;
envelopeInformation.EmailBlurb = 'XXXXXXXXXXXXX';
DocuSignAPI.TemplateReference templateReference = new DocuSignAPI.TemplateReference();
templateReference.RoleAssignments = new DocuSignAPI.ArrayOfTemplateReferenceRoleAssignment();
templateReference.Template = template.EnvelopeTemplateDefinition.TemplateID;
templateReference.TemplateLocation = 'Server';
DocuSignAPI.Recipient recipient = new DocuSignAPI.Recipient();
recipient.ID = currentRecipientIndex + 1;
recipient.Type_x = 'Signer';
recipient.Email = 'XXXXXXXXXXXXXXXX';
recipient.UserName = 'XXXXXXXXXXXXXXXXX';
recipient.RoutingOrder = 1;
DocuSignAPI.ArrayOfRecipient1 recipients = new DocuSignAPI.ArrayOfRecipient1();
recipients.Recipient = new DocuSignAPI.Recipient[1];
recipients.Recipient.add(recipient);
DocuSignAPI.TemplateReferenceRoleAssignment trra = new DocuSignAPI.TemplateReferenceRoleAssignment();
trra.RoleName='Stake holder';
trra.RecipientID = recipient.ID;
templateReference.RoleAssignments.RoleAssignment = new DocuSignAPI.TemplateReferenceRoleAssignment[1];
templateReference.RoleAssignments.RoleAssignment.add(trra);
DocuSignAPI.ArrayOfTemplateReference arrayOfTemplateReference = new DocuSignAPI.ArrayOfTemplateReference();
arrayOfTemplateReference.TemplateReference = new DocuSignAPI.TemplateReference[1];
arrayOfTemplateReference.TemplateReference.add(templateReference);
DocuSignAPI.EnvelopeStatus status = soapService.createEnvelopeFromTemplates(arrayOfTemplateReference, recipients, envelopeInformation, true);
However, upon running the code, I get the following error:
Web service callout failed: WebService returned a SOAP Fault: Unspecified_Error faultcode=soap:Server faultactor=https://demo.docusign.net/api/3.0/dsapi.asmx
And this references the DocuSignAPI where the WebServiceCallout is invoked. Given the ambiguity of the error, I would appreciate any thoughts on what could be causing this.
As an update to this post, I was able to find the error. The indexing for Apex starts at 0 not 1 (unlike MatLab which is what caused my confusion). Because I was starting at index 1, the XML request was passing 'null' values at the 0th index, causing the error. Starting at 0, removed the null values from the XML and the request went through.
Within NetSuite when trying to close out Return Authorization line items i receive the following error message:
INSUFFICIENT_PERMISSION
"You do not have permissions to set a value for element item.quantityreceived due to one of the following reasons: 1) The field is read-only; 2) An associated feature is disabled; 3) The field is available either when a record is created or updated, but not in both cases."
Here is the code:
//Pull down the RA in order to work with the line items in question
RecordRef rec = new RecordRef();
rec.internalId = internalId;
rec.type = RecordType.returnAuthorization;
rec.typeSpecified = true;
ReadResponse response = _service.get(rec);
//create the object from the response record returned
ReturnAuthorization ra = (ReturnAuthorization)response.record;
//cancel the order by updating the qty of each item to zero.
WriteResponse res = null;
ReturnAuthorizationItem[] raItemList = ra.itemList.item;
for (int lineCounter = 0; lineCounter < raItemList.Length; lineCounter++)
{
//only if the qty received is zero are we closing out the item(setting qty to zero)
if (raItemList[lineCounter].quantityReceived == 0)
{
raItemList[lineCounter].quantity = 0;
raItemList[lineCounter].quantitySpecified = true;
}
}
//create a new object and add all the changes in order to update the order lines
ReturnAuthorization updRa = new ReturnAuthorization();
updRa.internalId = internalId;
updRa.itemList = new ReturnAuthorizationItemList();
updRa.itemList.item = new ReturnAuthorizationItem[raItemList.Length];
updRa.itemList.item = raItemList;
res = _service.update(updRa);
I am trying to update the line quantity to zero, which in affect will close the Return Authorization if everything has been zeroed out. Question is how do i correct this permissions issue in order to run this update. I have tried setting other fields on this same call. No matter which field i try and update i get the same error message. This is running under an admin account and all permissions look fine as far as i can see. In fact i am running this very same logic against the SaleOrder object to close out Sales Orders with no issues.
Any help would be much appreciated.
Thanks,
Billy
You can't directly edit that line item field. That field is maintained by Netsuite and reflects Item Receipts received against the RA.
If you want to close the RA without receiving just set the line item column field "Closed" to true.
After looking at this a little closer here is the solution:
Replace the if statement in the loop with this:
//only if the qty received and returned are zero do we close out the item(setting qty to zero)
if (raItemList[lineCounter].quantityReceived == 0 && raItemList[lineCounter].quantityBilled == 0)
{
raItemList[lineCounter].quantity = 0;
raItemList[lineCounter].quantitySpecified = true;
raItemList[lineCounter].isClosed = true;
raItemList[lineCounter].isClosedSpecified = true;
raItemList[lineCounter].quantityReceivedSpecified = false;
raItemList[lineCounter].quantityBilledSpecified = false;
raItemList[lineCounter].costEstimateSpecified = false;
}
else
{
raItemList[lineCounter].quantityReceivedSpecified = false;
raItemList[lineCounter].quantityBilledSpecified = false;
raItemList[lineCounter].costEstimateSpecified = false;
}
I am guessing that the fields i had to specific as false are fields that cannot be edited, hence the need to disclude them from the update.
This is a better sample. Note the comment re orderline
/Pull down the RA in order to work with the line items in question
RecordRef rec = new RecordRef();
rec.internalId = internalId;
rec.type = RecordType.returnAuthorization;
rec.typeSpecified = true;
ReadResponse response = _service.get(rec);
//create the object from the response record returned
ReturnAuthorization ra = (ReturnAuthorization)response.record;
//cancel the order by updating the qty of each item to zero.
WriteResponse res = null;
ReturnAuthorizationItem[] raItemList = ra.itemList.item;
ReturnAuthorization updRa = new ReturnAuthorization();
updRa.internalId = internalId;
updRa.itemList = new ReturnAuthorizationItemList();
ReturnAuthorizationItem[] updateItems = new ReturnAuthorizationItem[raItemList.Length];
for (int lineCounter = 0; lineCounter < raItemList.Length; lineCounter++)
{
updateItems[lineCounter].line = raItemList[lineCounter].line; // you'll need to test this. Setting only the line should result in no changes to the RA line items that are not to be closed. use the &xml=T view before and after to make sure orderline (hidden) is still populated properly.
//only if the qty received is zero are we closing out the item(setting qty to zero)
if (raItemList[lineCounter].quantityReceived == 0)
{
updateItems[lineCounter].isClosed = true;
// raItemList[lineCounter].quantitySpecified = true; // is quantitySpecified a field? it wasn't as of the 2012.2 endpoint
}
}
//create a new object and add all the changes in order to update the order lines
updRa.itemList.item = updateItems;
res = _service.update(updRa);
Environment: C#, .Net 3.5, Sql Server 2005
I have a method that works in a stand-alone C# console application project. It creates an XMLElement from data in the database and uses a private method to send it to a web service on our local network. When run from VS in this test project, it runs in < 5 seconds.
I copied the class into a CLR project, built it, and installed it in SQL Server (WITH PERMISSION_SET = EXTERNAL_ACCESS). The only difference is the SqlContext.Pipe.Send() calls that I added for debugging.
I am testing it by using an EXECUTE command one stored procedure (in the CLR) from an SSMS query window. It never returns. When I stop execution of the call after a minute, the last thing displayed is "Calling GetResponse() using http://servername:53694/odata.svc/Customers/". Any ideas as to why the GetResponse() call doesn't return when executing within SQL Server?
private static string SendPost(XElement entry, SqlString url, SqlString entityName)
{
// Send the HTTP request
string serviceURL = url.ToString() + entityName.ToString() + "/";
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(serviceURL);
request.Method = "POST";
request.Accept = "application/atom+xml,application/xml";
request.ContentType = "application/atom+xml";
request.Timeout = 20000;
request.Proxy = null;
using (var writer = XmlWriter.Create(request.GetRequestStream()))
{
entry.WriteTo(writer);
}
try
{
SqlContext.Pipe.Send("Calling GetResponse() using " + request.RequestUri);
WebResponse response = request.GetResponse();
SqlContext.Pipe.Send("Back from GetResponse()");
/*
string feedData = string.Empty;
Stream stream = response.GetResponseStream();
using (StreamReader streamReader = new StreamReader(stream))
{
feedData = streamReader.ReadToEnd();
}
*/
HttpStatusCode StatusCode = ((HttpWebResponse)response).StatusCode;
response.Close();
if (StatusCode == HttpStatusCode.Created /* 201 */ )
{
return "Created # Location= " + response.Headers["Location"];
}
return "Creation failed; StatusCode=" + StatusCode.ToString();
}
catch (WebException ex)
{
return ex.Message.ToString();
}
finally
{
if (request != null)
request.Abort();
}
}
The problem turned out to be the creation of the request content from the XML. The original:
using (var writer = XmlWriter.Create(request.GetRequestStream()))
{
entry.WriteTo(writer);
}
The working replacement:
using (Stream requestStream = request.GetRequestStream())
{
using (var writer = XmlWriter.Create(requestStream))
{
entry.WriteTo(writer);
}
}
You need to dispose the WebResponse. Otherwise, after a few calls it goes to timeout.
You are asking for trouble doing this in the CLR. And you say you are calling this from a trigger? This belongs in the application tier.
Stuff like this is why when the CLR functionality came out, DBAs were very concerned about how it would be misused.