I'm using gstreamer to make a picture-in-picture composition of two rtmp inputs into an rtmp output.
I've managed to create a pipeline that works very well when both streams are offline
However, when one of the rtmp streams is not live when starting the pipeline - the pipeline does not start.
Does anyone know how to overcome this issue, and make sure the pipeline is not blocked if one rtmp source is offline?
You may have to insert identity into compositor input sub-pipelines.
Simulating 2 sources on localhost with:
gst-launch-1.0 videotestsrc ! x264enc insert-vui=1 ! h264parse config-interval=1 ! mpegtsmux ! rtpmp2tpay ! udpsink port=5004
(and second source the same to port 5005), the following runs fine for 0, 1 or 2 sources active at launch time:
gst-launch-1.0 -v \
udpsrc port=5004 ! application/x-rtp,media=video,encoding-name=MP2T,clock-rate=90000,payload=33 ! rtpjitterbuffer latency=300 ! rtpmp2tdepay ! tsdemux ! h264parse ! avdec_h264 ! videoconvert ! identity ! queue ! comp.sink_0 \
udpsrc port=5005 ! application/x-rtp,media=video,encoding-name=MP2T,clock-rate=90000,payload=33 ! rtpjitterbuffer latency=300 ! rtpmp2tdepay ! tsdemux ! h264parse ! avdec_h264 ! videoconvert ! identity ! queue ! comp.sink_1 \
compositor name=comp sink_0::xpos=0 sink_0::ypos=0 sink_0::width=320 sink_0::height=240 sink_1::xpos=0 sink_1::ypos=240 sink_1::width=320 sink_1::height=240 ! video/x-raw,width=320,height=480 ! videoconvert ! xvimagesink
For rtmp, with mpeg audio from first source, it would be something like:
gst-launch-1.0 -v \
rtmpsrc <your source1 and options> ! flvdemux name=demux0 ! queue ! h264parse ! avdec_h264 ! videoconvert ! identity ! queue ! comp.sink_0 \
rtmpsrc <your source2 and options> ! flvdemux name=demux1 ! queue ! h264parse ! avdec_h264 ! videoconvert ! identity ! queue ! comp.sink_1 \
compositor name=comp sink_0::xpos=0 sink_0::ypos=0 sink_0::width=320 sink_0::height=240 sink_1::xpos=0 sink_1::ypos=240 sink_1::width=320 sink_1::height=240 ! video/x-raw,width=320,height=480 ! videoconvert ! autovideosink \
demux0. ! queue ! audio/mpeg ! decodebin ! audioconvert ! audioresample ! autoaudiosink
Related
I cant save audio from stream I get only video in file. I suspect that I do not need two filesink in pipeline or there is some problem two different mux.
I tried to use autoadiosink and autovideosink and they works successfully.
autoadiosink and autovideosink pipeline:
gst-launch-1.0 rtspsrc location=rtsp://184.72.239.149/vod/mp4:BigBuckBunny_115k.mov latency=0 droponlatency=1 name=rtp_source ! queue ! rtph264depay ! decodebin ! videoconvert ! autovideosink rtp_source. ! queue ! decodebin ! autoaudiosink
Save to file filesink pipeline:
gst-launch-1.0 rtspsrc location=rtsp://184.72.239.149/vod/mp4:BigBuckBunny_115k.mov latency=0 droponlatency=1 name=rtp_source ! queue ! rtph264depay ! decodebin ! vp8enc ! webmmux ! filesink location=BigBuckBunny_115k.webm rtp_source. ! "application/x-rtp, media=(string)audio" ! queue ! decodebin ! vorbisenc ! oggmux ! filesink location=BigBuckBunny_115k.webm
I want to get also audio in resulting file.
You just reuse the existing mux - so that the vorbis is put into the webmmux too:
gst-launch-1.0 rtspsrc location=rtsp://184.72.239.149/vod/mp4:BigBuckBunny_115k.mov \
latency=0 droponlatency=1 name=rtp_source ! queue ! rtph264depay ! decodebin ! \
vp8enc ! webmmux name=mux ! filesink location=BigBuckBunny_115k.webm rtp_source. ! \
application/x-rtp, media=(string)audio" ! queue ! decodebin ! vorbisenc ! mux.
I am using the following pipeline to convert an flv file to mp4.
gst-launch-1.0 -vvv -e filesrc location="c.flv" ! flvdemux name=demux \
demux.audio ! queue ! decodebin ! audioconvert ! faac bitrate=32000 ! mux. \
demux.video ! queue ! decodebin ! videoconvert ! video/x-raw,format=I420 ! x264enc speed-preset=superfast tune=zerolatency psy-tune=grain sync-lookahead=5 bitrate=480 key-int-max=50 ref=2 ! mux. \
mp4mux name=mux ! filesink location="c.mp4"
The problem is when (for example) audio is missing, the pipeline gets stuck. (Same thing happens if just hooking a fakesink to demux.audio).
I need a way for the filters to ignore missing tracks, or produce empty tracks.
I use the gstreamer to decode the H264, when I use the pipeline like this:
gst-launch-1.0 udpsrc uri=udp://0.0.0.0:15550 caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,payload=(int)33,encoding-name=(string)MP2T" ! .recv_rtp_sink_0 rtpbin latency=800 ! rtpmp2tdepay ! tsdemux name=demux demux. ! h264parse ! queue ! omxh264dec ! vspfilter ! video/x-raw,width=800,height=480 ! waylandsink sync=false max-lateness=-1 demux. ! aacparse ! queue max-size-buffers=8192000 max-size-time=2000000000 ! faad ! alsasink device=media
there would be only about 200ms delay.
And when I set the sync=true, like this:
gst-launch-1.0 udpsrc uri=udp://0.0.0.0:15550 caps="application/x-rtp,media=(string)video,clock-rate=(int)90000,payload=(int)33,encoding-name=(string)MP2T" ! .recv_rtp_sink_0 rtpbin latency=800 ! rtpmp2tdepay ! tsdemux name=demux demux. ! h264parse ! queue ! omxh264dec ! vspfilter ! video/x-raw,width=800,height=480 ! waylandsink sync=true max-lateness=-1 demux. ! aacparse ! queue max-size-buffers=8192000 max-size-time=2000000000 ! faad ! alsasink device=media
the dalay would reach 1200ms
I have no idea about it.
I'm trying to stream an arbitrary file with gstreamer, I have the following command line but it does not work (I will use python when I get this to work)
gst-launch-1.0 uridecodebin uri=file:///tmp/File.mkv name=decoder name=decbin \
! queue\
! videoconvert ! x264enc \
! mp4mux name=muxer ! udpsink host=127.0.0.1 port=1234 decbin. \
! queue \
! audioconvert ! lamemp3enc ! muxer.
and playing with
gst-launch-1.0 udpsrc port=1234 ! 'application/x-rtp,payload=96'\
! rtph264depay ! decodebin ! xvimagesink sync=false
I know I have to add rtph264pay and rtpmpapay but I don't know where.
I want to transcode and resize mp4.(mp4-h264_1920x1080/aac => mp4-h264_640x480/mp3) using gstreamer. I wrote down this command.
$ gst-launch-0.10 filesrc location=./gain_1.mp4 ! qtdemux name=demux demux.video_00 ! queue ! ffdec_h264 ! videoscale ! 'video/x-raw-yuv,width=640,height=480' ! x264enc ! queue ! qtmux name=mux mux.video_0 demux.audio_00 ! queue ! ffdec_aac ! lame bitrate=128 ! queue ! mux.audio_0 mux. ! filesink location=0000.mp4 –v -e
Setting pipeline to PAUSED ...
Pipeline is PREROLLING ...
Redistribute latency...
^CCaught interrupt -- handling interrupt.
Interrupt: Stopping pipeline ...
(gst-launch-0.10:17958): GLib-CRITICAL **: Source ID 1 was not found when attempting to remove it
ERROR: pipeline doesn't want to preroll.
Setting pipeline to NULL ...
Freeing pipeline ...
which didn't work.
Transcoding video-only works :
gst-launch-0.10 filesrc location=./gain_1.mp4 ! qtdemux name=demux demux.video_00 ! queue ! ffdec_h264 ! videoscale ! 'video/x-raw-yuv, width=640, height=480' ! x264enc ! queue ! mux. mp4mux name=mux ! filesink location=0000.mp4 –v -e
And transcoding audio-only too:
gst-launch-0.10 filesrc location=./gain_1.mp4 ! qtdemux name=demux demux.audio_00 ! ffdec_aac ! lame bitrate=128 ! queue ! mux. mp4mux name=mux ! filesink location=0000.mp4 –v -e
How can I transcode audio and video with the same command?
#Lionel.J I would like to suggest two improvements:
if possible, use gstreamer-1
your solution reads the source file twice. That's not necessary. Furthermore, the audio and video streams are not synchronized when you do this. You can read both audio and video streams out of qtdemux.
This is a pipeline which does the job with gstreamer-1 and reads the source only once:
gst-launch-1.0 -e filesrc location=/path/to/big_buck_bunny_720p_h264.mov ! \
decodebin name=decode ! \
videoscale ! 'video/x-raw,width=640,height=480' ! \
x264enc ! queue ! mp4mux name=mp4mux ! filesink location=0000.mp4 \
decode. ! audioconvert ! lamemp3enc bitrate=128 ! queue ! mp4mux.
Oh~
I solved this problem.
Next command did good work.
gst-launch-0.10 ffmux_mp4 name=mux ! \
filesink location=0000.mp4 \
filesrc location=./gain_1.mp4 ! qtdemux name=vdemux vdemux.video_00 ! queue ! ffdec_h264 ! videoscale ! 'video/x-raw-yuv, width=640, height=480' ! x264enc ! queue ! mux. \
filesrc location=./gain_1.mp4 ! qtdemux name=ademux ademux.audio_00 ! ffdec_aac ! lame bitrate=128 ! queue ! mux.`