I want to group the product name and cost per unit using measure. Can anyone help me with this?.
I have table like this - SUMMARIZE(Data,Data[Product name],Data[Cost Per Unit]) - How to calculate sum from this result.
For example I should get result like Chain - 500 by using measure
Hi create a new calculate table and use ADDCOLUMNS to do the aggregation
ADDCOLUMNS (
SUMMARIZE ( Data, Data[Product name], Data[Cost Per Unit] ),
"Sum of cost per unit", SUM ( Data[Cost Per Unit] )
)
Note:
This is not recommended please use power query group by as much as possible
Related
I am trying to calculate the TotalFTE, but I can't figure it out. I am fairly new to DAX and trying to make the best of it with some studycases.
The table contains a lot of columns, but these are the columns that are needed for the measure.
The measure should sum the highest FTE in a year per ID and ignore the blanks in ID.
I've build a measure that gives an error when I try to visulise the result in a card. My measure: TotalFTE = CALCULATE(MAX(Table[FTE]), FILTER(Table, DISTINCT(Table[ID])))
Any feedback?
Moving forward, please post data as tables in stack and refrain from provide the data as image.
Measure =
SUMX (
GROUPBY (
'Fact',
'Fact'[year],
'Fact'[ID],
"#Max", MAXX ( CURRENTGROUP (), 'Fact'[FTE] )
),
[#Max]
)
I am working in Power BI and I created a DAX measure that adds up two other DAX measures.
For one measure I need it to ignore the month slicer because I need the total for that category. Is it possible to do so?
Also, is it possible for it to ignore the slicer and still give me the total for unfiltered DAX measure + the date filter DAX measure?
DAX code:
Monthly Total Act =
CALCULATE (
SUM ( 'sheet1'[Amount] ),
FILTER ( 'sheet1', 'sheet1'[Type] = "ACT" ),
FILTER ( 'sheet1', 'sheet1'[Bill] = "Y" )`
)
Monthly Total of Acs =
CALCULATE (
SUM ( 'sheet1'[Amount] ),
FILTER ( 'sheet1', 'sheet1'[Type] = "ACR" ),
FILTER ( 'sheet1', 'sheet1'[Bill] = "Y" )`
)
Adding these two formulas together to get the total monthly.
The monthly total of ACS is where I encounter the problem. I need this to be unaffected by the slicer
The end goal is having the month total of ACS unaffected by the data slicer and add to the monthly total of Act that requires filter by the current month.
Yes, you can add this line as a third filter argument in the calculat function you want to ignore the month slicer:
ALL('tableName'[monthColumnUsedAsSlicer])
Then the monthe slicer will not affect calculations.
I am new in Power bi. I have a table where I have agents details. I have their scores as well. I have date wise data into table where the following columns are available -
I have created created measure for Average of Score where Metric is UES AGGREGATE -
I have to get the ranking of the advocate(s) for the Average Score (UES AGG). I have tried this measure for Ranking calculation -
Rank_UES = RANKX('RankSummary',[RKS_UESAGG])
I am getting wrong ranking. Please help me , how to solve the issue.
Thanking You.
Use ALL function with RANKX.
Rank_UES =
RANKX (
ALL ( 'RankSummary'[AgentfullName] ),
[RKS_UESAGG]
)
I do not know if your [RKS_UESAGG] get you what you want. Suppose you want average sales you make something like this:
Rank_UES =
RANKX (
ALL ( 'RankSummary'[AgentfullName] ),
AVERAGE ( 'RankSummary'[Amount] )
)
https://learn.microsoft.com/en-us/dax/rankx-function-dax
I have forecast and budget values for the year, and a new forecast is created every quarter. I need PowerBI to pick up the Metric Value (can be Budget, Q1F, Q2F and Q3F) for a given date based on data availability.
Example - If for a given date, data for Q3F is available, pick Q3F, else pick Q2F else Q1F else budget.
This is what my data looks like:
Date Metric Value
1/1/11 Budget 1.1
1/1/11 Q3F 1.2
1/1/11 Q2F 1.3
In this case the function should pick up Q3F since it's available.
One way to solve this would be by using both a SUMX and a SWITCH Statements.
To start with assign a constant to your forecasts, e.g. budget = 1, Q1F = 2 and so on as a column on your data. The idea more recent forecast will have a higher number, it will be used in the switch statement late. I am going to refer to it as forecast_ID in this example.
I am also assuming you have a calendar table, also that your forecasts are entered in entirely for the business and not in waves. E.g. Category A is still on budget, Category B is an updated forecast.
The idea of below, is that the SUMX iterates though each quarter that you are looking at, e.g. 2018 would run Q1, Q2, Q3, Q4 separately.
Within the context of each quarter, it is getting the MAX of your forecast IDs, which is then used in the switch to select the most recent forecast.
Measure :=
SUMX (
VALUES ( Calendar[Quarter] ),
SWITCH (
MAX ( table1[forecast_ID] ),
1, CALCULATE ( SUM ( table1[value] ), table1[Metric] = "Budget" ),
2, CALCULATE ( SUM ( table1[value] ), table1[Metric] = "Q1F" )
)
)
You could also then do something like MAX ( table1[forecast_ID] - 1) for finding the previous forecast dynamically.
If you always want to pull the most recent value then you can use LASTNONBLANK
As Marcus mentioned, the first step is to create a constant for your forecasts. I set up a separate table for this example.
Then you can create a relationship between the two tables based on Metric. Add a calculated column to your original table
MetricConstant = RELATED(Table2[Constant])
Now create a measure to pull the most recent value within each date period
Measure =
SUMX (
VALUES ( Table1[Date] ),
CALCULATE ( SUM ( Table1[Value] ), LASTNONBLANK ( Table1[MetricConstant], 1 ) )
)
Now when you pull in the Date and the Measure it will only show you the most recent available
EDIT-Updated based on comments. If you want to view which Metric is being used you need another measure
MetricMeasure = CALCULATE(MAX(Table1[Metric]),LASTNONBLANK(Table1[MetricConstant],1))
You could create an area chart based on that, and add this to the tooltip.
After googling for two pages, I'm struggling to find a simple way to create a cumulative sum measure by date and item in Power BI (using DAX). I have a table which contains:
Username
Date (DD-MM-YYYY)
Number of requests in that day
I have managed to obtain the cumulative sum by using the following expression (extracted from DAXPatterns):
CALCULATE (
SUM ( Table[Requests] ),
FILTER (
ALL ( 'Date'[Date] ),
'Date'[Date] <= MAX ( 'Date'[Date] )
)
)
But I would like to obtain a measure indicating how many requests have been made by a user up to a certain date.
Is there a simple way to do this?
Create calculated table using SUMMARIZECOLUMNS function and apply filter that you need on the top of that calculated table.
YourCalcTableName =
SUMMARIZECOLUMNS (
'UsernameTable'[Username],
'Date'[Date],
"Number Of Requests", SUMX ( 'UsernameTable', 'UsernameTable'[NumberOfRequests] )
)
This calculated table essencialy produces 3 column table with user name, date and number of requests sent by this user on this date.
SUMMARIZECOLUMNS