I am using HERE-Android-SDK to build a simple navigation solution with offline maps.
While using the offline mode for the search addresses and calculation of a route, I can see that there are results returned from the address-search, which are not included in the installed offline map datasets. Is there anything additional which I need to do, in order to get only search results which are located inside the offline-map data installed on my device?
I am using the following code snippets.
download offline maps for a specific country:
mapsLoader.selectDataGroup(MapPackage.SelectableDataGroup.TruckAttributes)
mapsLoader.installMapPackages(listOf(mapPackageId))
search request for addresses:
val term = "New York"
val center = GeoCoordinate(lastWayPoint.latitude, lastWayPoint.longitude)
val request = SearchRequest(term)
request.connectivity = Request.Connectivity.OFFLINE
request.locale = Locale.GERMAN
request.setSearchCenter(center)
request.collectionSize = 5
request.execute { data, error ->
if (error != ErrorCode.NONE) return
// handle search results here
}
Thanks for all of your help in advance!
Related
Is there any way to parametise the Datasource for the 'source' field in the Template Builder?
We have a multisite setup. As part of this it would save a lot of time and irritation if we could point our Droptrees and Treelists point at the appropriate locations rather than common parents.
For instance:
Content
--Site1
--Data
--Site2
--Data
Instead of having to point our site at the root Content folder I want to point it at the individual data folders, so I want to do something like:
DataSource=/sitecore/content/$sitename/Data
I can't find any articles on this. Is it something that's possible?
Not by default, but you can use this technique to code your datasources:
http://newguid.net/sitecore/2013/coded-field-datasources-in-sitecore/
You could possibly use relative paths if it fits with the rest of your site structure. It could be as simple as:
./Data
But if the fields are on random items all over the tree, that might not be helpul.
Otherwise try looking at:
How to use sitecore query in datasource location? (dynamic datasouce)
You might want to look at using a Querable Datasource Location and plugging into the getRenderingDatasource pipeline.
It's really going to depend on your use cases. The thing I like about this solution is there is no need to create a whole bunch of controls which effectively do he same thing as the default Sitecore ones, and you don't have to individually code up each datasource you require - just set the query you need to get the data. You can also just set the datasource query in the __standard values for the templates.
This is very similar to Holger's suggestion, I just think this code is neater :)
Since Sitecore 7 requires VS 2012 and our company isn't going to upgrade any time soon I was forced to find a Sitecore 6 solution to this.
Drawing on this article and this one I came up with this solution.
public class SCWTreeList : TreeList
{
protected override void OnLoad(EventArgs e)
{
if (!String.IsNullOrEmpty(Source))
this.Source = SourceQuery.Resolve(SContext.ContentDatabase.Items[ItemID], Source);
base.OnLoad(e);
}
}
This creates a custom TreeList control and passes it's Source field through to a class to handle it. All that class needs to do is resolve anything you have in the Source field into a sitecore query path which can then be reassigned to the source field. This will then go on to be handled by Sitecore's own query engine.
So for our multi-site solution it enabled paths such as this:
{A588F1CE-3BB7-46FA-AFF1-3918E8925E09}/$sitename
To resolve to paths such as this:
/sitecore/medialibrary/Product Images/Site2
Our controls will then only show items for the correct site.
This is the method that handles resolving the GUIDs and tokens:
public static string Resolve(Item item, string query)
{
// Resolve tokens
if (query.Contains("$"))
{
MatchCollection matches = Regex.Matches(query, "\\$[a-z]+");
foreach (Match match in matches)
query = query.Replace(match.Value, ResolveToken(item, match.Value));
}
// Resolve GUIDs.
MatchCollection guidMatches = Regex.Matches(query, "^{[a-zA-Z0-9-]+}");
foreach (Match match in guidMatches)
{
Guid guid = Guid.Parse(match.Value);
Item queryItem = SContext.ContentDatabase.GetItem(new ID(guid));
if (item != null)
query = query.Replace(match.Value, queryItem.Paths.FullPath);
}
return query;
}
Token handling below, as you can see it requires that any item using the $siteref token is inside an Site Folder item that we created. That allows us to use a field which contains the name that all of our multi-site content folders must follow - Site Reference. As long at that naming convention is obeyed it allows us to reference folders within the media library or any other shared content within Sitecore.
static string ResolveToken(Item root, string token)
{
switch (token)
{
case "$siteref":
string sRef = string.Empty;
Item siteFolder = root.Axes.GetAncestors().First(x => x.TemplateID.Guid == TemplateKeys.CMS.SiteFolder);
if (siteFolder != null)
sRef = siteFolder.Fields["Site Reference"].Value;
return sRef;
}
throw new Exception("Token '" + token + "' is not recognised. Please disable wishful thinking and try again.");
}
So far this works for TreeLists, DropTrees and DropLists. It would be nice to get it working with DropLinks but this method does not seem to work.
This feels like scratching the surface, I'm sure there's a lot more you could do with this approach.
Given a TFS build detail (IBuildDetail) with .Status of PartialSuccess, and .TestStatus of Failed how might I go about retrieving the list of tests (MSTest) that have failed on that build?
I have a working sandbox in which I can contact TFS via the SDK and retrieve the latest PartialSuccess build, but can't seem to find which service might have this unit test data and how I might go about querying it.
Can anyone shed some light?
This article is a great resource, actually it was the only one I had found available when I was searching something similar.In general you need access to ITestManagementService.Given you already have connection to a teamProjectCollection and a buildDetail, something like this should work out for you :
var tstService = (ITestManagementService)teamProjectCollection.GetService(typeof(ITestManagementService));
ITestManagementTeamProject testManagementTeamProject = tstService.GetTeamProject(buildDetail.TeamProject);
IEnumerable<ITestRun> testRuns = testManagementTeamProject.TestRuns.ByBuild(buildDetail.Uri);
foreach (var testRun in testRuns)
{
ITestCaseResultCollection testcases = testRun.QueryResultsByOutcome(TestOutcome.Failed);
foreach (var testcase in testcases)
{
Console.WriteLine("TestCase ID: " + testcase.TestCaseId);
Console.WriteLine("TestCase Title: " + testcase.TestCaseTitle);
Console.WriteLine("Error Message: " + testcase.ErrorMessage);
}
}
(This code is basically a copy from the article above, it is work by Anuj Chaudhary)
Remember to add "Microsoft.TeamFoundation.TestManagement.Client" in your ref list.
I installed and configured the Poll Module to work fine. The website I am working on will have a Poll instance on a page either as a left rail or a right rail item. The Polls would be setup in a separate folder. On the page item there will be a multilist field which will point to the Polls folder and the user can select whichever poll they choose to. The folder will also contain different sublayouts which will could be selected to be displayed on the rail. I have some custom code which will look at the above mentioned multilist field and show these rail items.
I don't know how to display a Poll programmatically. I haven't found any code samples and also not sure where to set the sublayout. Should I set it on the Poll template itself and then let use code to display it? How can I achieve this in code? Any code samples would be helpful.
Hoping that you will this time accept the answer, I wrote the following for you (based on the OMS Poll module:
Read out the field on your item:
Sitecore.Data.Fields.ReferenceField selectedPoll = (Sitecore.Data.Fields.ReferenceField)Sitecore.Context.Item.Fields["Poll"];
Get the pollItem:
if (selectedPoll.TargetItem != null)
{
Item pollItem = selectedPoll.TargetItem;
if (pollItem != null)
{
Check if the poll is opened or closed and place:
Sitecore.Data.Fields.CheckboxField pollClosed = (Sitecore.Data.Fields.CheckboxField)pollItem.Fields["Closed"];
if (pollClosed.Checked == false)
{
// Set the header of the snippetBlock
ltPollHeader.Text = pollItem.Name;
PollVotingSublayout pollSublayout = (PollVotingSublayout)LoadControl("/sitecore modules/Shell/Poll Module/Controls/PollVotingSublayout.ascx");
pollSublayout.Attributes.Add("sc_parameters", "PollPath=" + pollItem.Paths.FullPath);
pollSublayout.CurrentPoll = (PollItem)pollItem;
this.pollRegion.Controls.Add(pollSublayout);
phPollSnippet.Visible = true;
int blockPos = 0;
if (snippetField != null)
{
if (snippetField.GetItems().Any())
{
blockPos = 1;
}
}
string cssClass = String.Empty;
if (blockPos == 0)
{
cssClass = "snippetColHomeFirst";
}
this.SetClass("snippetColHome", cssClass);
}
Hope that you can make up something using this snippets. Good luck!
There should be a user account called "poll" on the sitecore domain. This account is normally used internal by the poll. In the comment of this account is stated: "Please do not remove this account". the account should have the Sitecore Minimal Page Editor role. I don't know the poll user credentials, but you might find that by either using reflector or opening cs files that you can get by downloading the source.
I have an application where people can give a phone number and it will send SMS texts to the phone number through EMail-SMS gateways. For this to work however, I need the phone company of the given number so that I send the email to the proper SMS gateway. I've seen some services that allow you to look up this information, but none of them in the form of a web service or database.
For instance, http://tnid.us provides such a service. Example output from my phone number:
Where do they get the "Current Telephone Company" information for each number. Is this freely available information? Is there a database or some sort of web service I can use to get that information for a given cell phone number?
What you need is called a HLR (Home Location Register) number lookup.
In their basic forms such APIs will expect a phone number in international format (example, +15121234567) and will return back their IMSI, which includes their MCC (gives you the country) and MNC (gives you the phone's carrier). The may even include the phone's current carrier (eg to tell if the phone is roaming). It may not work if the phone is currently out of range or turned off. In those cases, depending on the API provider, they may give you a cached result.
The site you mentioned seems to provide such functionality. A web search for "HLR lookup API" will give you plenty more results. I have personal experience with CLX's service and would recommend it.
This would be pretty code intensive, but something you could do right now, on your own, without APIs as long as the tnid.us site is around:
Why not have IE open in a hidden browser window with the URL of the phone number? It looks like the URL would take the format of http://tnid.us/search.php?q=########## where # represents a number. So you need a textbox, a label, and a button. I call the textbox "txtPhoneNumber", the label "lblCarrier", and the button would call the function I have below "OnClick".
The button function creates the IE instance using MSHtml.dll and SHDocVW.dll and does a page scrape of the HTML that is in your browser "object". You then parse it down. You have to first install the Interoperability Assemblies that came with Visual Studio 2005 (C:\Program Files\Common Files\Merge Modules\vs_piaredist.exe). Then:
1> Create a new web project in Visual Studio.NET.
2> Add a reference to SHDocVw.dll and Microsoft.mshtml.
3> In default.aspx.cs, add these lines at the top:
using mshtml;
using SHDocVw;
using System.Threading;
4> Add the following function :
protected void executeMSIE(Object sender, EventArgs e)
{
SHDocVw.InternetExplorer ie = new SHDocVw.InternetExplorerClass();
object o = System.Reflection.Missing.Value;
TextBox txtPhoneNumber = (TextBox)this.Page.FindControl("txtPhoneNumber");
object url = "http://tnid.us/search.php?q=" + txtPhoneNumber.Text);
StringBuilder sb = new StringBuilder();
if (ie != null) {
ie.Navigate2(ref url,ref o,ref o,ref o,ref o);
ie.Visible = false;
while(ie.Busy){Thread.Sleep(2);}
IHTMLDocument2 d = (IHTMLDocument2) ie.Document;
if (d != null) {
IHTMLElementCollection all = d.all;
string ourText = String.Empty;
foreach (object el in all)
{
//find the text by checking each (string)el.Text
if ((string)el.ToString().Contains("Current Phone Company"))
ourText = (string)el.ToString();
}
// or maybe do something like this instead of the loop above...
// HTMLInputElement searchText = (HTMLInputElement)d.all.item("p", 0);
int idx = 0;
// and do a foreach on searchText to find the right "<p>"...
foreach (string s in searchText) {
if (s.Contains("Current Phone Company") || s.Contains("Original Phone Company")) {
idx = s.IndexOf("<strong>") + 8;
ourText = s.Substring(idx);
idx = ourText.IndexOf('<');
ourText = ourText.Substring(0, idx);
}
}
// ... then decode "ourText"
string[] ourArray = ourText.Split(';');
foreach (string s in ourArray) {
char c = (char)s.Split('#')[1];
sb.Append(c.ToString());
}
// sb.ToString() is now your phone company carrier....
}
}
if (sb != null)
lblCarrier.Text = sb.ToString();
else
lblCarrier.Text = "No MSIE?";
}
For some reason I don't get the "Current Phone Company" when I just use the tnid.us site directly, though, only the Original. So you might want to have the code test what it's getting back, i.e.
bool currentCompanyFound = false;
if (s.Contains("Current Telephone Company")) { currentCompanyFound = true }
I have it checking for either one, above, so you get something back. What the code should do is to find the area of HTML between
<p class="lt">Current Telephone Company:<br /><strong>
and
</strong></p>
I have it looking for the index of
<strong>
and adding on the characters of that word to get to the starting position. I can't remember if you can use strings or only characters for .indexOf. But you get the point and you or someone else can probably find a way to get it working from there.
That text you get back is encoded with char codes, so you'd have to convert those. I gave you some code above that should assist in that... it's untested and completely from my head, but it should work or get you where you're going.
Did you look just slightly farther down on the tnid.us result page?
Need API access? Contact sales#tnID.us.
[Disclosure: I work for Twilio]
You can retrieve phone number information with Twilio Lookup.
If you are currently evaluating services and functionality for phone number lookup, I'd suggest giving Lookup a try via the quickstart.
I am trying to publish programmatically in Sitecore. Publishing works fine. But doing so programmatically doesn't clear the sitecore cache. What is the best way to clear the cache programmatically?
I am trying to use the webservice that comes with the staging module. But I am getting a Bad request exception(Exception: The remote server returned an unexpected response: (400) Bad Request.). I tried to increase the service receivetimeout and sendtimeout on the client side config file but that didn't fix the problem. Any pointers would be greatly appreciated?
I am using the following code:
CacheClearService.StagingWebServiceSoapClient client = new CacheClearService.StagingWebServiceSoapClient();
CacheClearService.StagingCredentials credentials = new CacheClearService.StagingCredentials();
credentials.Username = "sitecore\adminuser";
credentials.Password = "***********";
credentials.isEncrypted = false;
bool s = client.ClearCache(true, dt, credentials);
I am using following code to do publish.
Database master = Sitecore.Configuration.Factory.GetDatabase("master");
Database web = Sitecore.Configuration.Factory.GetDatabase("web");
string userName = "default\adminuser";
Sitecore.Security.Accounts.User user = Sitecore.Security.Accounts.User.FromName(userName, true);
user.RuntimeSettings.IsAdministrator = true;
using (new Sitecore.Security.Accounts.UserSwitcher(user))
{
Sitecore.Publishing.PublishOptions options = new Sitecore.Publishing.PublishOptions(master, web,
Sitecore.Publishing.PublishMode.Full, Sitecore.Data.Managers.LanguageManager.DefaultLanguage, DateTime.Now);
options.RootItem = master.Items["/sitecore/content/"];
options.Deep = true;
options.CompareRevisions = true;
options.RepublishAll = true;
options.FromDate = DateTime.Now.AddMonths(-1);
Sitecore.Publishing.Publisher publisher = new Sitecore.Publishing.Publisher(options);
publisher.Publish();
}
In Sitecore 6, the CacheManager class has a static method that will clear all caches. The ClearAll() method is obsolete.
Sitecore.Caching.CacheManager.ClearAllCaches();
Just a quick note, in Sitecore 6.3, that is not needed anymore. Caches are being cleared automatically after a change happens on a remote server.
Also, if you are on previous releases, instead of clearing all caches, you can do partial cache clearing.
There is a free shared source component called Stager that does that.
http://trac.sitecore.net/SitecoreStager
If you need a custom solution, you can simply extract the source code from there.
I got this from Sitecore support. It clears all caches:
Sitecore.Context.Database = this.WebContext.Database;
Sitecore.Context.Database.Engines.TemplateEngine.Reset();
Sitecore.Context.ClientData.RemoveAll();
Sitecore.Caching.CacheManager.ClearAllCaches();
Sitecore.Context.Database = this.ShellContext.Database;
Sitecore.Context.Database.Engines.TemplateEngine.Reset();
Sitecore.Caching.CacheManager.ClearAllCaches();
Sitecore.Context.ClientData.RemoveAll();
Out of the box solution provided by Sitecore to clean caches (ALL of them) is utilized by the following page: http://sitecore_instance_here/sitecore/admin/cache.aspx and code behind looks like the following snippet:
foreach (var cache in Sitecore.Caching.CacheManager.GetAllCaches())
cache.Clear();
Via the SDN:
HtmlCache cache = CacheManager.GetHtmlCache(Context.Site);
if (cache != null) {
cache.Clear();
}