enter image description here
Input-
Code value Min Max
A abc 10 null
A abc Null 20
Output-
Code value Min Max
A abc 10 20
You can use an aggregator transformation to remove nulls and get single row. I am providing solution based on your data only.
use an aggregator with below ports -
inout_Code (group by)
inout_value (group by)
in_Min
in_Max
out_Min= MAX(in_Min)
out_Max = MAX(in_Max)
And then attach out_Min, out_Max, code and value to target.
You will get 1 record for a combination of code and value and null values will be gone.
Now, if you have more than 4/5/6/more etc. code,value combinations and some of min, max columns are null and you want multiple records, you need more complex mapping logic. Let me know if this helps. :)
Related
I have a formula that do almost what I need. I'm trying to get a list of values with a condition depending about one value, is objetive 1 is equal or over to 80 show me the list of objetives equal or over 80. My formula is this one:
=ARRAYFORMULA(IF(('Product Prioritization Matrix'!C7:C >= 80), 'Product Prioritization Matrix'!B7:B,""))
My problem comes when I try to put this in just one cell in the last image will show what I need visualy.
The next images will show the sheets:
My formula
Expected result
I think a JOIN(... , FILTER( structure will work for this:
=JOIN(", ",FILTER(Sheet1!B:B,Sheet1!C:C>=80))
New to Informatica.
For Ex: This is a Flat file to Flat file load.
I have a expression that has calculated the data to the sample given below:
The some CUST has one entry with N flag and some has two with N and Y.
I need only the 1 and N or 2 and Y occurrence to be on target table, as sated below, pls let me know how to do it in Informatica.
Source
CUST-111|N|1
CUST-222|N|1
CUST-222|Y|2
CUST-333|N|1
CUST-444|N|1
CUST-555|N|1
CUST-555|Y|2
CUST-666|N|1
CUST-666|Y|2
Target:
CUST-111|N|1
CUST-222|Y|2
CUST-333|N|1
CUST-444|N|1
CUST-555|Y|2
CUST-666|Y|2
Thanks a lot guys
You can first calculate count of customer. Then, if count =1 and flag = N, pass it to target else if count >1, then pass to target only the record with flag =Y.
Steps below -
Sort data by Cust ID (CID)
Use Aggregator to calculate count.
Use CUST_ID as group by. Create a new output port
out_FLAG_CNT = COUNT(*).
Use joiner to join step 2 and step1. Join condition is Cust ID.
Then use a filter with below condition-
IIF (out_FLAG_CNT>1 AND FLAG='Y',TRUE, IIF( out_FLAG_CNT=1 AND FLAG='N', TRUE, FALSE))
Finally link this data to target.
|-->Agg( count by CID)-|
SQ --> SRT (Sort by CID) -->|---------------------->|JNR (on CID) -->FIL (Cond above) --> Target
Pls note, if you have more than 1 N or more than 1 Y data, then above will not work and you need to attach another aggregator in the end.
I have one sheet with data on my facebook ads. I have another sheet with data on the products in my store. I'm having trouble with some countifs where I'm counting how many times my product ID exists in a row where multiple numbers are. They are formatted like this: /2032/2034/2040/1/
It's easy on the rows where only one product ID exists but some rows have multiple ID's separated by a /. And I need to see if the ID exists as a exact match alone or somewhere between the /'s.
Rows with facebook ads data:
A1: /2032/2034/2040/1/
A2: /1548/84/2154/2001/
A3: /2032/1689/1840/2548/
Row with product data:
B1: 2034
C1: I need a countifs here that checks how many times B1 exists in column A. Lets say I have thousands of rows with different variations of A1 where B1 could standalone. How do I count this? I always need exact matches.
You can compare the number you want (56) with the REGEX #MonkeyZeus commented whith a little change -> "(?:^|/)"&B1&"(?:/|$)" so the end result is:
=IF(REGEXMATCH(A1, "(?:^|/)"&B1&"(?:/|$)"), true, false)
Example:
UPDATE
If you need to count the total of 56 in X rows you can change the "True / False" of the condition for "1 / 0" and then do a =SUM(C1:C5) on the last row:
=IF(REGEXMATCH(A1, "(?:^|/)"&B1&"(?:/|$)"), 1, 0)
UPDATE 2
Thanks for contributing. Unfortunately I'm not able to do it this way
since I have loads of data to do this on. Is there a way to do it with
a countif in a single cell without adding a extra step with "sum"?
In that case you can do:
=COUNTA(FILTER(A:A, REGEXMATCH(A:A, "(?:^|/)"&B2&"(?:/|$)")))
Example:
UPDATE 3
With the following condition you check every single possibility just by adding another COUNTIF:
=COUNTIF(A:A,B1) + COUNTIF(A:A, "*/"&B1) + COUNTIF(A:A, B1&"/*") + COUNTIF(A:A, "*/"&B1&"/*")
Hope this helps!
try:
=COUNTIF(SPLIT(A1, "/"), B1)
UPDATE:
=ARRAYFORMULA(IF(A2<>"", {
SUM(IF((REGEXMATCH(""&DATA!C:C, ""&A2))*(DATA!B:B="carousel"), 1, )),
SUM(IF((REGEXMATCH(""&DATA!C:C, ""&A2))*(DATA!B:B="imagepost"), 1, ))}, ))
I have a spreadsheet set up with tv program titles in column B, the next 20 or so columns are tracking different information about that title. I need to count the number of blank cells in column R relating to the range in column B that contains titles (ie, up to the first blank row in column B.)
I can easily set up a formula to count the number of empty cells in a given range in column R, the problem is as I add more titles to the sheet I would have to keep updating the range in the formula [a simple =COUNTIF(R3:R1108, "")]. I've done a little googling of the problem but haven't quite found anything that fits the situation. I thought I would be able to get the following to work but I didn't fully understand what was going on with them and they weren't giving the expected results.
I've tried these formulas:
=ArrayFormula(sum(MIN("B3:B"&MIN(IF((R3:R)>"",ROW(B3:B)-1)))))
=ArrayFormula(sum(INDIRECT("B3:B"&MIN(IF((R3:R)>"",ROW(B3:B)-1)))))
And
=if(SUM(B3:B)="","",SUM(R3:R))
All of the above formulas give "0" as the result. Based on the COUNTIF formula I have set up it should be 840, which is a number I would expect. Currently, there are 1106 rows containing data and 840 is a reasonable number to expect in this situation.
Is this what you're looking for?
=COUNTBLANK(INDIRECT(CONCATENATE("R",3,":R",(3+COUNTA(B3:B)))))
This counts the number of non-blank rows in the B column (starting at B3), and uses that to determine the rows to perform COUNTBLANK in, in column R (starting at R3). CONCATENATE is a way to give it a range by adding strings together, and the INDIRECT allows for the range reference to be a string.
a proper way would be:
=ARRAYFORMULA(COUNTBLANK(INDIRECT(ADDRESS(3, 18, 4)&":"&
ADDRESS(MAX(IF(B3:B<>"", ROW(B3:B), )), 18, 4)))
or shorter:
=ARRAYFORMULA(COUNTBLANK(INDIRECT("R3:"&
ADDRESS(MAX(IF(B3:B<>"", ROW(B3:B), )), 18, 4))))
or shorter:
=ARRAYFORMULA(COUNTBLANK(INDIRECT("R3:R"&MAX(IF(B3:B<>"", ROW(B3:B), ))))
Hey guys anyone know how to create number of rows based on the count value without using java transformation in informatica 9.6(For flat file).Please help me with that
You can create an auxiliary table with n rows for each possible count value between 1 and N:
1
2
2
3
3
3
...
...
N rows with the last value
...
N rows with the last value
Join this table to the source data using the n count value as the key and you will get n copies of each source row.