I have the following regex pattern to find an email address in my code:
/[\._a-zA-Z0-9-]+#[\._a-zA-Z0-9-]{8,}/i
I want to make sure it does not match a certain string if it includes:
abc
xyz
Just to exclude the abc I have tried:
/(?!.*abc)[\._a-zA-Z0-9-]+#[\._a-zA-Z0-9-]{8,}/i
But that is horribly slow.
You need to "anchor" the regex to a position that can be found by the regex engine in an optimal way. The best way is to "tie" it to a word boundary position, and that should work here since emails start with word chars:
/\b(?!\S*abc)[\w.-]+#[\w.-]{8,}/i
BTW, [_a-zA-Z0-9] is equal to \w in JavaScript regex. Details:
\b - a word boundary
(?!\S*abc) - a negative lookahead that fails the match if there are zero or more non-whitespace chars and then abc immediately to the right of the current location
[\w.-]+ - one or more word, . or - chars
# - a # char
[\w.-]{8,}- eight or more word, . or - chars.
You can do it in two steps. Use a regular expression to find the email address, then check that it doesn't contain any of the prohibited strings.
if (preg_match('/[\._a-zA-Z0-9-]+#[\._a-zA-Z0-9-]{8,}/i', $text, $match) && !preg_match('/abc|xyz/i', $match[0])) {
$email = $match[0];
}
Related
PCRE Regex: Is it possible for Regex to check for a pattern match within only the first X characters of a string, ignoring other parts of the string beyond that point?
My Regex:
I have a Regex:
/\S+V\s*/
This checks the string for non-whitespace characters whoich have a trailing 'V' and then a whitespace character or the end of the string.
This works. For example:
Example A:
SEBSTI FMDE OPORV AWEN STEM students into STEM
// Match found in 'OPORV' (correct)
Example B:
ARKFE SSETE BLMI EDSF BRNT CARFR (name removed) Academy Networking Event
//Match not found (correct).
Re: The capitalised text each letter and the letters placement has a meaning in the source data. This is followed by generic info for humans to read ("Academy Networking Event", etc.)
My Issue:
It can theoretically occur that sometimes there are names that involve roman numerals such as:
Example C:
ARKFE SSETE BLME CARFR Academy IV Networking Event
//Match found (incorrect).
I would like my Regex above to only check the first X characters of the string.
Can this be done in PCRE Regex itself? I can't find any reference to length counting in Regex and I suspect this can't easily be achieved. String lengths are completely arbitary. (We have no control over the source data).
Intention:
/\S+V\s*/{check within first 25 characters only}
ARKFE SSETE BLME CARFR Academy IV Networking Event
^
\- Cut off point. Not found so far so stop.
//Match not found (correct).
Workaround:
The Regex is in PHP and my current solution is to cut the string in PHP, to only check the first X characters, typically the first 20 characters, but I was curious if there was a way of doing this within the Regex without needing to manipulate the string directly in PHP?
$valueSubstring = substr($coreRow['value'],0,20); /* first 20 characters only */
$virtualCount = preg_match_all('/\S+V\s*/',$valueSubstring);
The trick is to capture the end of the line after the first 25 characters in a lookahead and to check if it follows the eventual match of your subpattern:
$pattern = '~^(?=.{0,25}(.*)).*?\K\S+V\b(?=.*\1)~m';
demo
details:
^ # start of the line
(?= # open a lookahead assertion
.{0,25} # the twenty first chararcters
(.*) # capture the end of the line
) # close the lookahead
.*? # consume lazily the characters
\K # the match result starts here
\S+V # your pattern
\b # a word boundary (that matches between a letter and a white-space
# or the end of the string)
(?=.*\1) # check that the end of the line follows with a reference to
# the capture group 1 content.
Note that you can also write the pattern in a more readable way like this:
$pattern = '~^
(*positive_lookahead: .{0,20} (?<line_end> .* ) )
.*? \K \S+ V \b
(*positive_lookahead: .*? \g{line_end} ) ~xm';
(The alternative syntax (*positive_lookahead: ...) is available since PHP 7.3)
You can find your pattern after X chars and skip the whole string, else, match your pattern. So, if X=25:
^.{25,}\S+V.*(*SKIP)(*F)|\S+V\s*
See the regex demo. Details:
^.{25,}\S+V.*(*SKIP)(*F) - start of string, 25 or more chars other than line break chars, as many as possible, then one or more non-whitespaces and V, and then the rest of the string, the match is failed and skipped
| - or
\S+V\s* - match one or more non-whitespaces, V and zero or more whitespace chars.
Any V ending in the first 25 positions
^.{1,24}V\s
See regex
Any word ending in V in the first 25 positions
^.{1,23}[A-Z]V\s
Given any URL, like:
https://stackoverflow.com/v1/summary/1243PQ/details/P1/9981
How do I extract the numeric or alphanumeric part of the URL? I.e. the following strings from the url given above:
1. v1
2. 1243PQ
3. P1
4. 9981
To rephrase, a regex to extract strings from a string (URL) which have at least 1 digit and 0 or more alphabet characters, separated by '/'.
I tried to capture a repeating group (^[a-zA-Z0-9]+)+ and ([a-zA-Z]{0,100}[0-9]{1,100})+ but it didn't work. In hindsight intuition does say this shouldn't work. I am unsure how do I match patterns over a group and not just a single character.
If I understand what you really want:
Extracting parts with only numbers or with numbers following alphabets
then; I can suggest this regex:
\b[a-zA-Z]*[0-9]+[a-zA-z]*\b
Regex Demo
I use \b to assert position of a word boundary or a part.
As numbers are required and alphabets can comes before or after that I use above regex.
If following alphabets are not required then I can suggest this regex:
\b[a-zA-z0-9]*[0-9]+[a-zA-Z0-9]*\b
Regex Demo
I believe this should work for you:
(\d*\w+\d+\w*)
EDIT: actually, this should be sufficient
(\w+\d+\w*)
or
(\w*\d+\w*)
Well, you could do this:
(\w*\d+\w*) with the g (global) regex option
On the example URL, it would look like this:
const regex = /(\w*\d+\w*)/g;
const url = 'https://stackoverflow.com/v1/summary/1243PQ/details/P1/9981';
console.log(url.match(regex))
Try \/[a-zA-Z]*\d+[a-zA-Z0-9]*
Explanation:
\/ - match / literally
[a-zA-Z]* - 0+ letters
\d+ - 1+ digits - thanks to this, we require at least one digits
[a-zA-Z0-9]* - 0+ letters or digits
Demo
It will captrure together with / at the beginning, so you need to trim it.
I am trying to make an regex in PCRE for string detection. The kind of strings I want to detect are abcdef001, zxyabc003. A word with first 6 characters are a-zA-Z and last two or three are digits 0-9; and this string could be anywhere in the whole text.
E.g - "User activity from server1, user id abcdef009, time 10.20am".
How do I go about this?
Try this:
/[a-zA-Z]{6}[0-9]{2,3}/
If you want to limit it to whole words, try:
/\b[a-zA-Z]{6}[0-9]{2,3}\b/
\b - word boundry
[a-zA-Z]{6} - six letters
[0-9]{2,3} - either 2 or 3 numbers
\b - word boundry
Use regex pattern
/[a-z]{6}\d{2,3}/i
I want to match entire words (or strings really) that containing only defined characters.
For example if the letters are d, o, g:
dog = match
god = match
ogd = match
dogs = no match (because the string also has an "s" which is not defined)
gods = no match
doog = match
gd = match
In this sentence:
dog god ogd, dogs o
...I would expect to match on dog, god, and o (not ogd, because of the comma or dogs due to the s)
This should work for you
\b[dog]+\b(?![,])
Explanation
r"""
\b # Assert position at a word boundary
[dog] # Match a single character present in the list “dog”
+ # Between one and unlimited times, as many times as possible, giving back as needed (greedy)
\b # Assert position at a word boundary
(?! # Assert that it is impossible to match the regex below starting at this position (negative lookahead)
[,] # Match the character “,”
)
"""
The following regex represents one or more occurrences of the three characters you're looking for:
[dog]+
Explanation:
The square brackets mean: "any of the enclosed characters".
The plus sign means: "one or more occurrences of the previous expression"
This would be the exact same thing:
[ogd]+
Which regex flavor/tool are you using? (e.g. JavaScript, .NET, Notepad++, etc.) If it's one that supports lookahead and lookbehind, you can do this:
(?<!\S)[dog]+(?!\S)
This way, you'll only get matches that are either at the beginning of the string or preceded by whitespace, or at the end of the string or followed by whitespace. If you can't use lookbehind (for example, if you're using JavaScript) you can spell out the leading condition:
(?:^|\s)([dog]+)(?!\S)
In this case you would retrieve the matched word from group #1. But don't take the next step and try to replace the lookahead with (?:$|\s). If you did that, the first hit ("dog") would consume the trailing space, and the regex wouldn't be able to use it to match the next word ("god").
Depending on the language, this should do what you need it to do. It will only match what you said above;
this regex:
[dog]+(?![\w,])
in a string of ..
dog god ogd, dogs o
will only match..
dog, god, and o
Example in javascript
Example in php
Anything between two [](brackets) is a character class.. it will match any character between the brackets. You can also use ranges.. [0-9], [a-z], etc, but it will only match 1 character. The + and * are quantifiers.. the + searches for 1 or more characters, while the * searches for zero or more characters. You can specify an explicit character range with curly brackets({}), putting a digit or multiple digits in-between: {2} will match only 2 characters, while {1,3} will match 1 or 3.
Anything between () parenthesis can be used for callbacks, say you want to return or use the values returned as replacements in the string. The ?! is a negative lookahead, it won't match the character class after it, in order to ensure that strings with the characters are not matched when the characters are present.
Trying to learn regular expressions. As a practice, I'm trying to find every word that appears exactly one time in my document -- in linguistics this is a hapax legemenon (http://en.wikipedia.org/wiki/Hapax_legomenon)
So I thought the following expression give me the desired result:
\w{1}
But this doesn't work. The \w returns a character not a whole word. Also it does not appear to be giving me characters that appear only once (it actually returns 25873 matches -- which I assume are all alphanumeric characters). Can someone give me an example of how to find "hapax legemenon" with a regular expression?
If you're trying to do this as a learning exercise, you picked a very hard problem :)
First of all, here is the solution:
\b(\w+)\b(?<!\b\1\b.*\b\1\b)(?!.*\b\1\b)
Now, here is the explanation:
We want to match a word. This is \b\w+\b - a run of one or more (+) word characters (\w), with a 'word break' (\b) on either side. A word break happens between a word character and a non-word character, so this will match between (e.g.) a word character and a space, or at the beginning and the end of the string. We also capture the word into a backreference by using parentheses ((...)). This means we can refer to the match itself later on.
Next, we want to exclude the possibility that this word has already appeared in the string. This is done by using a negative lookbehind - (?<! ... ). A negative lookbehind doesn't match if its contents match the string up to this point. So we want to not match if the word we have matched has already appeared. We do this by using a backreference (\1) to the already captured word. The final match here is \b\1\b.*\b\1\b - two copies of the current match, separated by any amount of string (.*).
Finally, we don't want to match if there is another copy of this word anywhere in the rest of the string. We do this by using negative lookahead - (?! ... ). Negative lookaheads don't match if their contents match at this point in the string. We want to match the current word after any amount of string, so we use (.*\b\1\b).
Here is an example (using C#):
var s = "goat goat leopard bird leopard horse";
foreach (Match m in Regex.Matches(s, #"\b(\w+)\b(?<!\b\1\b.*\b\1\b)(?!.*\b\1\b)"))
Console.WriteLine(m.Value);
Output:
bird
horse
It can be done in a single regex if your regex engine supports infinite repetition inside lookbehind assertions (e. g. .NET):
Regex regexObj = new Regex(
#"( # Match and capture into backreference no. 1:
\b # (from the start of the word)
\p{L}+ # a succession of letters
\b # (to the end of a word).
) # End of capturing group.
(?<= # Now assert that the preceding text contains:
^ # (from the start of the string)
(?: # (Start of non-capturing group)
(?! # Assert that we can't match...
\b\1\b # the word we've just matched.
) # (End of lookahead assertion)
. # Then match any character.
)* # Repeat until...
\1 # we reach the word we've just matched.
) # End of lookbehind assertion.
# We now know that we have just matched the first instance of that word.
(?= # Now look ahead to assert that we can match the following:
(?: # (Start of non-capturing group)
(?! # Assert that we can't match again...
\b\1\b # the word we've just matched.
) # (End of lookahead assertion)
. # Then match any character.
)* # Repeat until...
$ # the end of the string.
) # End of lookahead assertion.",
RegexOptions.Singleline | RegexOptions.IgnorePatternWhitespace);
Match matchResults = regexObj.Match(subjectString);
while (matchResults.Success) {
// matched text: matchResults.Value
// match start: matchResults.Index
// match length: matchResults.Length
matchResults = matchResults.NextMatch();
}
If you are trying to match an English word, the best form is:
[a-zA-Z]+
The problem with \w is that it also includes _ and numeric digits 0-9.
If you need to include other characters, you can append them after the Z but before the ]. Or, you might need to normalize the input text first.
Now, if you want a count of all words, or just to see words that don't appear more than once, you can't do that with a single regex. You'll need to invest some time in programming more complex logic. It may very well need to be backed by a database or some sort of memory structure to keep track of the count. After you parse and count the whole text, you can search for words that have a count of 1.
(\w+){1} will match each word.
After that you could always perfrom the count on the matches....
Higher level solution:
Create an array of your matches:
preg_match_all("/([a-zA-Z]+)/", $text, $matches, PREG_PATTERN_ORDER);
Let PHP count your array elements:
$tmp_array = array_count_values($matches[1]);
Iterate over the tmp array and check the word count:
foreach ($tmp_array as $word => $count) {
echo $word . ' ' . $count;
}
Low level but does what you want:
Pass your text in an array using split:
$array = split('\s+', $text);
Iterate over that array:
foreach ($array as $word) { ... }
Check each word if it is a word:
if (!preg_match('/[^a-zA-Z]/', $word) continue;
Add the word to a temporary array as key:
if (!$tmp_array[$word]) $tmp_array[$word] = 0;
$tmp_array[$word]++;
After the loop. Iterate over the tmp array and check the word count:
foreach ($tmp_array as $word => $count) {
echo $word . ' ' . $count;
}