I'm using Acumatica customization Acumatica-LotSerialNbrAttribute
This customization adds a new screen for look for InventoryID and LotSerialNbr and visualize its attributes.
I'm trying to add this window to the acumatica mobile app.
Here my code:
add screen IN202501 {
add container "InventoryLotSerialContainers" {
add field "InventoryID"
add field "LotSerialNbr"
add group "Attributes" {
displayName = "Attributes"
collapsable = True
add attributes "AttributesAttributes"
}
add recordAction "Save" {
behavior = Save
}
add recordAction "Cancel" {
behavior = Cancel
}
attachments {
}
}
}
And the screen is visible on the mobile app with the 2 selectors
Then I select Inventory and when I select Lot Serial Nbr, the first selector is in blank, causing that I can't review the attributtes neither save the information.
Here the InventoryID selector in blank.
Hope you can help me to successfully publish this screen on acumatica mobile app.
Thanks.
Attributes are a grid style representation in Acumatica. That means you need a container that will show multiple records. I'm getting rusty on mobile pretty quickly, but I believe your definition is set to display a single value value only.
Try adding a separate container for attributes:
add container "AttributesAttributes" {
add field "Attribute"
add field "Value"
}
This should open into a view of multiple records, showing all of your attributes. By specifying the Attribute and Value fields, you should see both data elements in the container.
Related
I'm trying to customize a page so that the edit button (the pencil icon one) directs the user to a specific page. In my case, the edit button is linked to a BAccountID field :
By default, it opens the Business Account's page (page CR303000):
I would like it to open a different page that I created that has a similar BAccount view (page AR303001) :
Can this be done ? And how ? I can't seem to find the code behind this logic.
The target graph is declared in the PXPrimaryGraph attribute decorating the DAC.
BAccount DAC is a special case that uses a more complex attribute (CRCacheIndependentPrimaryGraphList) that inherits from PXPrimaryGraph.
[CRCacheIndependentPrimaryGraphList(new Type[]{
typeof(CR.BusinessAccountMaint),
typeof(EP.EmployeeMaint),
typeof(AP.VendorMaint),
typeof(AP.VendorMaint),
typeof(AR.CustomerMaint),
typeof(AR.CustomerMaint),
typeof(AP.VendorMaint),
typeof(AR.CustomerMaint),
typeof(CR.BusinessAccountMaint)},
new Type[]{
typeof(Select<CR.BAccount, Where<CR.BAccount.bAccountID, Equal<Current<BAccount.bAccountID>>,
And<Current<BAccount.viewInCrm>, Equal<True>>>>),
typeof(Select<EP.EPEmployee, Where<EP.EPEmployee.bAccountID, Equal<Current<BAccount.bAccountID>>>>),
typeof(Select<AP.VendorR, Where<AP.VendorR.bAccountID, Equal<Current<BAccount.bAccountID>>>>),
typeof(Select<AP.Vendor, Where<AP.Vendor.bAccountID, Equal<Current<BAccountR.bAccountID>>>>),
typeof(Select<AR.Customer, Where<AR.Customer.bAccountID, Equal<Current<BAccount.bAccountID>>>>),
typeof(Select<AR.Customer, Where<AR.Customer.bAccountID, Equal<Current<BAccountR.bAccountID>>>>),
typeof(Where<CR.BAccountR.bAccountID, Less<Zero>,
And<BAccountR.type, Equal<BAccountType.vendorType>>>),
typeof(Where<CR.BAccountR.bAccountID, Less<Zero>,
And<BAccountR.type, Equal<BAccountType.customerType>>>),
typeof(Select<CR.BAccount,
Where2<Where<
CR.BAccount.type, Equal<BAccountType.prospectType>,
Or<CR.BAccount.type, Equal<BAccountType.customerType>,
Or<CR.BAccount.type, Equal<BAccountType.vendorType>,
Or<CR.BAccount.type, Equal<BAccountType.combinedType>>>>>,
And<Where<CR.BAccount.bAccountID, Equal<Current<BAccount.bAccountID>>,
Or<Current<BAccount.bAccountID>, Less<Zero>>>>>>)
},
VerifyRightsBy = new [] { typeof(CR.BusinessAccountMaint) })]
There is no way to easily customize this attribute. To change it would you need to replace the BAccount DAC with another one. The preferred method for your use case is to avoid usage PXPrimaryGraph attribute by using a regular action button.
The action button can be configured to show the pencil icon:
Make PXButton appear as pencil icon
And it can be displayed beside the field using PXLayout Merge property or you can use LinkCommand to redirect:
https://stackoverflow.com/a/60446714/7376238
I have multiple File Browser Item fields on one page of Application in Oracle Apex.
What happens: When I miss any Item for which validation error fires, I want to hold that file to the browser but I usually loose it if I get that validation error. Is there a solution for the same like other Items fields hold previous value except File Browser Item field. Please see below ss:
Anshul,
APEX 4.2 is very old and no longer supported. A later (or preferably latest) version of APEX will behave differently as Dan explained above.
Can you import your application into apex.oracle.com (which is running APEX 20.1) and you will probably see better results. Based on this you can hopefully use it as justification to upgrade your environment.
Regards,
David
Go to your page-level attributes and a function like the following in the Function and Global Variable Declaration:
function validateItems(request) {
var $file1 = $('#P68_FILE_1');
var $file2 = $('#P68_FILE_2');
var errorsFound = false;
if ($file1.val() === '') {
errorsFound = true;
// Show item in error state
}
if ($file2.val() === '') {
errorsFound = true;
// Show item in error state
}
if (!errorsFound) {
// I think doSubmit was the name of the function back then. If not, try apex.submit
doSubmit(request);
} else {
// Show error message at top of page, I'll use a generic alert for now
alert('You must select a file for each file selector.');
}
}
Then, right-click the Create button and select Create a Dynamic Action. Set the name of the Dynamic Action to Create button clicked.
For the Action, set Type to Execute JavaScript Code. Enter the following JS in code:
validateItems('CREATE');
Finally, ensure that Fire on Initialization is disabled.
Repeat the process for the Save button, but change the request value passed to validateItems to SAVE.
In Sitecore Content editor/Page editor, when I add items to TreelistEx I would like the TreelistEx to allow only 12 items. To achieve this solution, I have added a Regex ^.{0,467}$ in the validation field inside the template section in which I want to limit the items.
I have referred this article
This Regex works properly in Content editor. But for the page editor whenever I add an items in treelistEx it works fine for the first time but again if I add/remove items it gives me validation message for both greater and less number of items just after on click of "Ok"and items are also not saved.
Ideally it should give validation message if number of items are greater than 12 and only on Click of "save" button same as it is working in Content editor. How can I solve this Regex validation problem in Page editor? I am using Sitecore 8.1
I also had the same issue a while ago and because of the limited time i had i implemented a not so ideal way but you can implement it if you want.
Let the user add the items and then just grab the first 12 in your code. It will be something like this:
Create a method to get the multicast item (For flexibility).
public static MultilistField GetMultilistField(Item item, string fieldName)
{
if (item != null && !string.IsNullOrWhiteSpace(fieldName))
{
MultilistField field = item.Fields[fieldName];
if (field != null)
{
return field;
}
}
return null;
}
Get the items within the Miltilist field.
MultilistField field = GetMultilistField[DatasourceItem, "fieldName"];
var returnList = field.GetItems().Where(c => c.TemplateName.Equals("someValidationIfYouWant")).ToList().Take(12);
I have a SPEAK UI dialog with a ListControl bound to a custom JSON datasource. This works and the ListControl is correctly populated. My JSON data looks something like this:
[
{
"itemId":"{BA26159A-194D-4A3C-9D1A-DA9472F11BE0}",
"selected":true
},
{
"itemId":"{E651D0CD-0E7E-4903-8E26-0D1D5A168E69}",
"selected":false
},
{
"itemId":"{E651D0CD-0E7E-4903-8E26-0D1D5A168E70}",
"selected":false
}
]
Is there a way to ensure the relevant row of the ListControl is selected ("selected":true) when the dialog loads?
You can set the ListControl's selected item ID like this: this.MediaResultsListControl.viewModel.set({selectedItemId:"ITEMID"})
(Sitecore.Speak.app instead of this during dubuging in the console)
If you call this.MediaResultsListControl.viewModel.selectedItemId() you can see the selected item has been set by the above method.
Wondering on page load, if you can set the ListControls selected item id, from the page code manually using this method?
Looking at the JS for the list control. It calls this on click of a row. Wonder if you can replace this to trigger selected row?
selectRow: function (row, rowModel) {
this.$el.find(".active").removeClass("active");
row.addClass("active");
this.model.set("selectedItem", rowModel);
this.model.set("selectedItemId", rowModel.get("itemId"));
},
How to enable the multilist to be control in content editor?
for example I have a list of item, item1 to item10. In the standard template value, I defined item1,2,3. After I have deploy the solution, how am I going to enable users in content editor mode or page editor mode to select item7,8,9 and 10?
And also, after I tested/rendered the multilist, only RAW VALUES are being rendered, is there any possible to render the item name such as item1? Do I need to customize the multilist?
The multilist control should be directly visible to the user in the Content Editor, you do not need to do anything else. Since you defined some items in standard values then those will be "pre-selected" when that item is first created. The user can then add the additional items as required.
To allow users to select values from the Page Editor you can Use Sitecore EditFrame in PageEdit
The reason the item is being rendered as the raw value is because you need to get the item and then iterate over the target id's. There is an example of this here here
//Get a multilist field from the current item
Sitecore.Data.Fields.MultilistField multilistField = Sitecore.Context.Item.Fields["myMultilistField"];
if (multilistField != null)
{
//Iterate over all the selected items by using the property TargetIDs
foreach (ID id in multilistField.TargetIDs)
{
Item targetItem = Sitecore.Context.Database.Items[id];
litItemTitle = targetItem.DisplayName;
// Do something with the target items
// ...
}
}
You can use the following instead for the datasource of a repeater
Sitecore.Data.Fields.MultilistField multilistField = Sitecore.Context.Item.Fields["myMultilistField"];
Sitecore.Data.Items.Item[] items = multilistField.GetItems();