I'm trying to implement two-way multicast UDP communication using Boost.Asio.
Actually what I need is client-server architecture.
I used these tutorials and examples and modified them:
https://www.boost.org/doc/libs/1_71_0/doc/html/boost_asio/example/cpp11/multicast/receiver.cpp
https://www.boost.org/doc/libs/1_71_0/doc/html/boost_asio/example/cpp11/multicast/sender.cpp
https://www.boost.org/doc/libs/1_71_0/doc/html/boost_asio/example/cpp11/futures/daytime_client.cpp
https://www.boost.org/doc/libs/1_71_0/doc/html/boost_asio/tutorial/tutdaytime6.html
Futures daytime client and daytime server works perfectly fine, unless I use multicast address for it, which I have to. It just doesn't communicate.
I modified client's daytime function and server example's constructor to look like this:
Client:
void get_daytime(boost::asio::io_context& io_context,
const boost::asio::ip::address& listenAddress,
const boost::asio::ip::address& multicastAddress)
{
try
{
udp::socket socket(io_context);
boost::asio::ip::udp::endpoint listenEndpoint(listenAddress, multicastPort);
socket.open(listenEndpoint.protocol());
socket.set_option(boost::asio::ip::udp::socket::reuse_address(true));
socket.bind(listenEndpoint);
socket.set_option(boost::asio::ip::multicast::join_group(multicastAddress));
std::array<char, 1U> send_buf = {{ 0 }};
std::future<std::size_t> send_length =
socket.async_send_to(boost::asio::buffer(send_buf),
listenEndpoint,
boost::asio::use_future);
send_length.get();
std::array<char, 128U> recv_buf{};
udp::endpoint sender_endpoint;
std::future<std::size_t> recv_length =
socket.async_receive_from(
boost::asio::buffer(recv_buf),
sender_endpoint,
boost::asio::use_future);
std::cout.write(
recv_buf.data(),
recv_length.get()); // Blocks until receive is complete.
}
catch (std::system_error& e)
{
std::cerr << e.what() << std::endl;
}
}
Server:
udp_server(boost::asio::io_context& io_context,
const boost::asio::ip::address& listenAddress,
const boost::asio::ip::address_v4& multicastAddress)
: socket_(io_context)
{
boost::asio::ip::udp::endpoint listenEndpoint(listenAddress, multicastPort);
socket_.open(listenEndpoint.protocol());
socket_.set_option(boost::asio::ip::udp::socket::reuse_address(true));
socket_.bind(listenEndpoint);
socket_.set_option(boost::asio::ip::multicast::join_group(multicastAddress));
start_receive();
}
How should I modify the code in order to make it work over multicast? Thanks.
I found a solution to my problem. I didn't have to modify getDaytime() function, though my udp_server() constructor now looks like this:
udp_server(boost::asio::io_context& io_context)
: socket_(io_context, udp::endpoint(boost::asio::ip::make_address("0.0.0.0"), 60000))
{
socket_.set_option(boost::asio::ip::multicast::join_group(boost::asio::ip::make_address("239.192.0.1")));
start_receive();
}
Related
i want, to get the url content (http://127.0.0.1:1337/test/test), so in this case "/test/test", how i can do that?
using tcp = boost::asio::ip::tcp;
void ts3plugin_initWebsocket() {
try
{
auto const address = boost::asio::ip::make_address("127.0.0.1");
auto const port = static_cast<unsigned short>(std::atoi("1337"));
boost::asio::io_context ioc{ 1 };
tcp::acceptor acceptor{ ioc, {address, port} };
while (true) {
tcp::socket socket{ ioc };
acceptor.accept(socket);
ts3Functions.logMessage("Connected", LogLevel_INFO, "Plugin", 1);
}
}
catch (const std::exception& e)
{
char msg[512];
snprintf(msg, sizeof(msg), "Error: %s", e.what());
ts3Functions.logMessage(msg, LogLevel_INFO, "Plugin", 1);
}
}
This has little to do with Asio, and everything with HTTP. You want to make a GET request, see e.g. https://developer.mozilla.org/en-US/docs/Web/HTTP/Methods/GET
Going by the naming you might also want to upgrade to Websocket protocol over HTTP. Instead of figuring out how to do all that, perhaps just go by one of the Beast examples:
https://www.boost.org/doc/libs/1_78_0/libs/beast/doc/html/beast/examples.html
I'm having problems with the udp broadcast subsection of an application. I am using boost 1.62.0 under windows 10.
void test_udp_broadcast(void)
{
boost::asio::io_service io_service;
boost::asio::ip::udp::socket socket(io_service);
boost::asio::ip::udp::endpoint remote_endpoint;
socket.open(boost::asio::ip::udp::v4());
socket.set_option(boost::asio::ip::udp::socket::reuse_address(true));
socket.set_option(boost::asio::socket_base::broadcast(true));
remote_endpoint = boost::asio::ip::udp::endpoint(boost::asio::ip::address_v4::any(), 4000);
try {
socket.bind(remote_endpoint);
socket.send_to(boost::asio::buffer("abc", 3), remote_endpoint);
} catch (boost::system::system_error e) {
std::cout << e.what() << std::endl;
}
}
I receive:
send_to: The requested address is not valid in its context
From the catch.
I've attempted to change the endpoint from any() to broadcast(), however this only throws the same error on bind().
I normally program under linux, and this code works on my normal target. So I'm scratching my head as to what I'm doing wrong here. Can anyone give me a poke in the right direction?
I believe you want to bind your socket to a local endpoint with any() (if you wish to receive broadcast packets - see this question), and send to a remote endpoint using broadcast() (see this question).
The following compiles for me and does not throw any errors:
void test_udp_broadcast(void)
{
boost::asio::io_service io_service;
boost::asio::ip::udp::socket socket(io_service);
boost::asio::ip::udp::endpoint local_endpoint;
boost::asio::ip::udp::endpoint remote_endpoint;
socket.open(boost::asio::ip::udp::v4());
socket.set_option(boost::asio::ip::udp::socket::reuse_address(true));
socket.set_option(boost::asio::socket_base::broadcast(true));
local_endpoint = boost::asio::ip::udp::endpoint(boost::asio::ip::address_v4::any(), 4000);
remote_endpoint = boost::asio::ip::udp::endpoint(boost::asio::ip::address_v4::broadcast(), 4000);
try {
socket.bind(local_endpoint);
socket.send_to(boost::asio::buffer("abc", 3), remote_endpoint);
} catch (boost::system::system_error e) {
std::cout << e.what() << std::endl;
}
}
I'm writing a secure SSL echo server with boost ASIO and coroutines. I'd like this server to be able to serve multiple concurrent clients, this is my code
try {
boost::asio::io_service io_service;
boost::asio::spawn(io_service, [&io_service](boost::asio::yield_context yield) {
auto ctx = boost::asio::ssl::context{ boost::asio::ssl::context::sslv23 };
ctx.set_options(
boost::asio::ssl::context::default_workarounds
| boost::asio::ssl::context::no_sslv2
| boost::asio::ssl::context::single_dh_use);
ctx.use_private_key_file(..); // My data setup
ctx.use_certificate_chain_file(...); // My data setup
boost::asio::ip::tcp::acceptor acceptor(io_service,
boost::asio::ip::tcp::endpoint(boost::asio::ip::tcp::v4(), port));
for (;;) {
boost::asio::ssl::stream<boost::asio::ip::tcp::socket> sock{ io_service, ctx };
acceptor.async_accept(sock.next_layer(), yield);
sock.async_handshake(boost::asio::ssl::stream_base::server, yield);
auto ec = boost::system::error_code{};
char data_[1024];
auto nread = sock.async_read_some(boost::asio::buffer(data_, 1024), yield[ec]);
if (ec == boost::asio::error::eof)
return; //connection closed cleanly by peer
else if (ec)
throw boost::system::system_error(ec); //some other error, is this desirable?
sock.async_write_some(boost::asio::buffer(data_, nread), yield[ec]);
if (ec == boost::asio::error::eof)
return; //connection closed cleanly by peer
else if (ec)
throw boost::system::system_error(ec); //some other error
// Shutdown gracefully
sock.async_shutdown(yield[ec]);
if (ec && (ec.category() == boost::asio::error::get_ssl_category())
&& (SSL_R_PROTOCOL_IS_SHUTDOWN == ERR_GET_REASON(ec.value())))
{
sock.lowest_layer().close();
}
}
});
io_service.run();
}
catch (std::exception& e)
{
std::cerr << "Exception: " << e.what() << "\n";
}
Anyway I'm not sure if the code above will do: in theory calling async_accept will return control to the io_service manager.
Will another connection be accepted if one has already been accepted, i.e. it's already past the async_accept line?
It's a bit hard to understand the specifics of your question, since the code is incomplete (e.g., there's a return in your block, but it's unclear what is that block part of).
Notwithstanding, the documentation contains an example of a TCP echo server using coroutines. It seems you basically need to add SSL support to it, to adapt it to your needs.
If you look at main, it has the following chunk:
boost::asio::spawn(io_service,
[&](boost::asio::yield_context yield)
{
tcp::acceptor acceptor(io_service,
tcp::endpoint(tcp::v4(), std::atoi(argv[1])));
for (;;)
{
boost::system::error_code ec;
tcp::socket socket(io_service);
acceptor.async_accept(socket, yield[ec]);
if (!ec) std::make_shared<session>(std::move(socket))->go();
}
});
This loops endlessly, and, following each (successful) call to async_accept, handles accepting the next connection (while this connection and others might still be active).
Again, I'm not sure about your code, but it contains exits from the loop like
return; //connection closed cleanly by peer
To illustrate the point, here are two applications.
The first is a Python multiprocessing echo client, adapted from PMOTW:
import socket
import sys
import multiprocessing
def session(i):
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_address = ('localhost', 5000)
print 'connecting to %s port %s' % server_address
sock.connect(server_address)
print 'connected'
for _ in range(300):
try:
# Send data
message = 'client ' + str(i) + ' message'
print 'sending "%s"' % message
sock.sendall(message)
# Look for the response
amount_received = 0
amount_expected = len(message)
while amount_received < amount_expected:
data = sock.recv(16)
amount_received += len(data)
print 'received "%s"' % data
except:
print >>sys.stderr, 'closing socket'
sock.close()
if __name__ == '__main__':
pool = multiprocessing.Pool(8)
pool.map(session, range(8))
The details are not that important (although it's Python, and therefore easy to read), but the point is that it opens up 8 processes, and each engages the same asio echo server (below) with 300 messages.
When run, it outputs
...
received "client 1 message"
sending "client 1 message"
received "client 2 message"
sending "client 2 message"
received "client 3 message"
received "client 0 message"
sending "client 3 message"
sending "client 0 message"
...
showing that the echo sessions are indeed interleaved.
Now for the echo server. I've slightly adapted the example from the docs:
#include <cstdlib>
#include <iostream>
#include <memory>
#include <utility>
#include <boost/asio.hpp>
using boost::asio::ip::tcp;
class session :
public std::enable_shared_from_this<session> {
public:
session(tcp::socket socket) : socket_(std::move(socket)) {}
void start() { do_read(); }
private:
void do_read() {
auto self(
shared_from_this());
socket_.async_read_some(
boost::asio::buffer(data_, max_length),
[this, self](boost::system::error_code ec, std::size_t length) {
if(!ec)
do_write(length);
});
}
void do_write(std::size_t length) {
auto self(shared_from_this());
socket_.async_write_some(
boost::asio::buffer(data_, length),
[this, self](boost::system::error_code ec, std::size_t /*length*/) {
if (!ec)
do_read();
});
}
private:
tcp::socket socket_;
enum { max_length = 1024 };
char data_[max_length];
};
class server {
public:
server(boost::asio::io_service& io_service, short port) :
acceptor_(io_service, tcp::endpoint(tcp::v4(), port)),
socket_(io_service) {
do_accept();
}
private:
void do_accept() {
acceptor_.async_accept(
socket_,
[this](boost::system::error_code ec) {
if(!ec)
std::make_shared<session>(std::move(socket_))->start();
do_accept();
});
}
tcp::acceptor acceptor_;
tcp::socket socket_;
};
int main(int argc, char* argv[]) {
const int port = 5000;
try {
boost::asio::io_service io_service;
server s{io_service, port};
io_service.run();
}
catch (std::exception& e) {
std::cerr << "Exception: " << e.what() << "\n";
}
}
This shows that this server indeed interleaves.
Note that this is not the coroutine version. While I once played with the coroutine version a bit, I just couldn't get it to build on my current box (also, as sehe notes in the comments below, you might anyway prefer this more mainstream version for now).
However, this is not a fundamental difference, w.r.t. your question. The non-coroutine version has callbacks explicitly explicitly launching new operations supplying the next callback; the coroutine version uses a more sequential-looking paradigm. Each call returns to asio's control loop in both versions, which monitors all the current operations which can proceed.
From the asio coroutine docs:
Coroutines let you create a structure that mirrors the actual program logic. Asynchronous operations don’t split functions, because there are no handlers to define what should happen when an asynchronous operation completes. Instead of having handlers call each other, the program can use a sequential structure.
It's not that the sequential structure makes all operations sequential - that would eradicate the entire need for asio.
i have an understanding problem how boost asio handles this:
When I watch my request response on client side, I can use following boost example Example
But I don't understand what happens if the server send every X ms some status information to the client. Have I open a serperate socket for this or can my client difference which is the request, response and the cycleMessage ?
Can it happen, that the client send a Request and read is as cycleMessage? Because he is also waiting for async_read because of this Message?
class TcpConnectionServer : public boost::enable_shared_from_this<TcpConnectionServer>
{
public:
typedef boost::shared_ptr<TcpConnectionServer> pointer;
static pointer create(boost::asio::io_service& io_service)
{
return pointer(new TcpConnectionServer(io_service));
}
boost::asio::ip::tcp::socket& socket()
{
return m_socket;
}
void Start()
{
SendCycleMessage();
boost::asio::async_read(
m_socket, boost::asio::buffer(m_data, m_dataSize),
boost::bind(&TcpConnectionServer::handle_read_data, shared_from_this(), boost::asio::placeholders::error));
}
private:
TcpConnectionServer(boost::asio::io_service& io_service)
: m_socket(io_service),m_cycleUpdateRate(io_service,boost::posix_time::seconds(1))
{
}
void handle_read_data(const boost::system::error_code& error_code)
{
if (!error_code)
{
std::string answer=doSomeThingWithData(m_data);
writeImpl(answer);
boost::asio::async_read(
m_socket, boost::asio::buffer(m_data, m_dataSize),
boost::bind(&TcpConnectionServer::handle_read_data, shared_from_this(), boost::asio::placeholders::error));
}
else
{
std::cout << error_code.message() << "ERROR DELETE READ \n";
// delete this;
}
}
void SendCycleMessage()
{
std::string data = "some usefull data";
writeImpl(data);
m_cycleUpdateRate.expires_from_now(boost::posix_time::seconds(1));
m_cycleUpdateRate.async_wait(boost::bind(&TcpConnectionServer::SendTracedParameter,this));
}
void writeImpl(const std::string& message)
{
m_messageOutputQueue.push_back(message);
if (m_messageOutputQueue.size() > 1)
{
// outstanding async_write
return;
}
this->write();
}
void write()
{
m_message = m_messageOutputQueue[0];
boost::asio::async_write(
m_socket,
boost::asio::buffer(m_message),
boost::bind(&TcpConnectionServer::writeHandler, this, boost::asio::placeholders::error,
boost::asio::placeholders::bytes_transferred));
}
void writeHandler(const boost::system::error_code& error, const size_t bytesTransferred)
{
m_messageOutputQueue.pop_front();
if (error)
{
std::cerr << "could not write: " << boost::system::system_error(error).what() << std::endl;
return;
}
if (!m_messageOutputQueue.empty())
{
// more messages to send
this->write();
}
}
boost::asio::ip::tcp::socket m_socket;
boost::asio::deadline_timer m_cycleUpdateRate;
std::string m_message;
const size_t m_sizeOfHeader = 5;
boost::array<char, 5> m_headerData;
std::vector<char> m_bodyData;
std::deque<std::string> m_messageOutputQueue;
};
With this implementation I will not need boost::asio::strand or? Because I will not modify the m_messageOutputQueue from an other thread.
But when I have on my client side an m_messageOutputQueue which i can access from an other thread on this point I will need strand? Because then i need the synchronization? Did I understand something wrong?
The differentiation of the message is part of your application protocol.
ASIO merely provides transport.
Now, indeed if you want to have a "keepalive" message you will have to design your protocol in such away that the client can distinguish the messages.
The trick is to think of it at a higher level. Don't deal with async_read on the client directly. Instead, make async_read put messages on a queue (or several queues; the status messages could not even go in a queue but supersede a previous non-handled status update, e.g.).
Then code your client against those queues.
A simple thing that is typically done is to introduce message framing and a message type id:
FRAME offset 0: message length(N)
FRAME offset 4: message data
FRAME offset 4+N: message checksum
FRAME offset 4+N+sizeof checksum: sentinel (e.g. 0x00, or a larger unique signature)
The structure there makes the protocol more extensible. It's easy to add encryption/compression without touch all other code. There's built-in error detection etc.
I apologize in advance if the question has been previously answered, but I've searched and found nothing that helps me. As indicated by the question's title, I'm trying to broadcast a package from a server to a set of clients listening for any message.
The client will count the number of messages it receives during one second.
The server side of things goes like this:
class Server
{
public:
Server(boost::asio::io_service& io)
: socket(io, udp::endpoint(udp::v4(), 8888))
, broadcastEndpoint(address_v4::broadcast(), 8888)
, tickHandler(boost::bind(&Server::Tick, this, boost::asio::placeholders::error))
, timer(io, boost::posix_time::milliseconds(20))
{
socket.set_option(boost::asio::socket_base::reuse_address(true));
socket.set_option(boost::asio::socket_base::broadcast(true));
timer.async_wait(tickHandler);
}
private:
void Tick(const boost::system::error_code&)
{
socket.send_to(boost::asio::buffer(buffer), broadcastEndpoint);
timer.expires_at(timer.expires_at() + boost::posix_time::milliseconds(20));
timer.async_wait(tickHandler);
}
private:
udp::socket socket;
udp::endpoint broadcastEndpoint;
boost::function<void(const boost::system::error_code&)> tickHandler;
boost::asio::deadline_timer timer;
boost::array<char, 100> buffer;
};
It is initialized and run in the following way:
int main()
{
try
{
boost::asio::io_service io;
Server server(io);
io.run();
}
catch (const std::exception& e)
{
std::cerr << e.what() << "\n";
}
return 0;
}
This (apparently) works fine. Now comes the client...
void HandleReceive(const boost::system::error_code&, std::size_t bytes)
{
std::cout << "Got " << bytes << " bytes\n";
}
int main(int argc, char* argv[])
{
if (argc != 2)
{
std::cerr << "Usage: " << argv[0] << " <host>\n";
return 1;
}
try
{
boost::asio::io_service io;
udp::resolver resolver(io);
udp::resolver::query query(udp::v4(), argv[1], "1666");
udp::endpoint serverEndpoint = *resolver.resolve(query);
//std::cout << serverEndpoint.address() << "\n";
udp::socket socket(io);
socket.open(udp::v4());
socket.bind(serverEndpoint);
udp::endpoint senderEndpoint;
boost::array<char, 300> buffer;
auto counter = 0;
auto start = std::chrono::system_clock::now();
while (true)
{
socket.receive_from(boost::asio::buffer(buffer), senderEndpoint);
++counter;
auto current = std::chrono::system_clock::now();
if (current - start >= std::chrono::seconds(1))
{
std::cout << counter << "\n";
counter = 0;
start = current;
}
}
}
catch (const std::exception& e)
{
std::cerr << e.what() << "\n";
}
This works when running both the server and client on the same machine, but doesn't when I run the server on a machine different from that of where I run the client.
First thing is, it seems odd to me that I have to resolve the server's address. Perhaps I don't know how broadcasting really works, but I thought the server would send a message using its socket with the broadcast option turned on, and it would arrive to all the sockets in the same network.
I read you should bind the client's socket to the address_v4::any() address. I did, it doesn't work (says something about a socket already using the address/port).
Thanks in advance.
PS: I'm under Windows 8.
I am a bit surprised this works on the same machine. I would not have expected the client, listening to port 1666, to receive data being sent to the broadcast address on port 8888.
bind() assigns a local endpoint (composed of a local address and port) to the socket. When a socket binds to an endpoint, it specifies that the socket will only receive data sent to the bound address and port. It is often advised to bind to address_v4::any(), as this will use all available interfaces for listening. In the case of a system with multiple interfaces (possible multiple NIC cards), binding to a specific interface address will result in the socket only listening to data received from the specified interface[1]. Thus, one might find themselves obtaining an address through resolve() when the application wants to bind to a specific network interface and wants to support resolving it by providing the IP directly (127.0.0.1) or a name (localhost).
It is important to note that when binding to a socket, the endpoint is composed of both an address and port. This is the source of my surprise that it works on the same machine. If the server is writing to broadcast:8888, a socket bound to port 1666 should not receive the datagram. Nevertheless, here is a visual of the endpoints and networking:
.--------.
.--------.|
.--------. address: any address: any .--------.||
| | port: any / \ port: 8888 | |||
| server |-( ----------->| address: broadcast |----------> )-| client ||'
| | \ port: 8888 / | |'
'--------' '--------'
The server binds to any address and any port, enables the broadcast option, and sends data to the remote endpoint (broadcast:8888). Clients bound to the any address on port 8888 should receive the data.
A simple example is as follows.
The server:
#include <boost/asio.hpp>
int main()
{
namespace ip = boost::asio::ip;
boost::asio::io_service io_service;
// Server binds to any address and any port.
ip::udp::socket socket(io_service,
ip::udp::endpoint(ip::udp::v4(), 0));
socket.set_option(boost::asio::socket_base::broadcast(true));
// Broadcast will go to port 8888.
ip::udp::endpoint broadcast_endpoint(ip::address_v4::broadcast(), 8888);
// Broadcast data.
boost::array<char, 4> buffer;
socket.send_to(boost::asio::buffer(buffer), broadcast_endpoint);
}
The client:
#include <iostream>
#include <boost/asio.hpp>
int main()
{
namespace ip = boost::asio::ip;
boost::asio::io_service io_service;
// Client binds to any address on port 8888 (the same port on which
// broadcast data is sent from server).
ip::udp::socket socket(io_service,
ip::udp::endpoint(ip::udp::v4(), 8888 ));
ip::udp::endpoint sender_endpoint;
// Receive data.
boost::array<char, 4> buffer;
std::size_t bytes_transferred =
socket.receive_from(boost::asio::buffer(buffer), sender_endpoint);
std::cout << "got " << bytes_transferred << " bytes." << std::endl;
}
When the client is not co-located with the server, then it could be a variety of network related issues:
Verify connectivity between the server and client.
Verify firewall exceptions.
Verify broadcast support/exceptions on the routing device.
Use a network analyzer tool, such as Wireshark, to verify that the time to live field in the packets is high enough that it will not be discarded during routing.
1. On Linux, broadcast datagrams received by an adapter will not be passed to a socket bound to a specific interface, as the datagram's destination is set to the broadcast address. On the other hand, Windows will pass broadcast datagrams received by an adapter to sockets bound to a specific interface.