I am installing VMware vSphre ESXi 7.0.2. But I cannot use web client (http://<ip_address>/ui)
When installed first time, I can connect with https://<IP_address> (It will be redirect to https://<IP_address>/ui ) and can create VM. But I found I cannot use some SDD/HDD. So I have re-installed ESXi after created the RAID partitions.
Re-Install was look OK, and I can see DCUI and set IP, DNS etc... After all set, I've tried to use https://<IP_address>. But it was timed out. (I have checked several things, then I found the ping does not work.)
I restarted the server then ping is OK. But when I try to connect with https://<IP_address> then the ping became "Destination net unreachable". (I have confirmed it with "-t" option.)
I thought it is firewall settings. So, I changed "--default-action" and "--enabled" but it still not working. Just in case, I have stop to use RAID disks and re-install it again (it is same as first installation), but it was same results.
There's likely still a networking-related misconfiguration. Use DCUI to verify IP/subnet mask/gateway/VLAN tag (if necessary) and that the appropriate NIC has been configured.
If those are set correctly, the DCUI also has some built-in testing options which allows you to do some outbound ping testing. By default it will check 3 hosts, including the gateway and usually two DNS names, but those can be changed to other options.
Related
I have an older dedicated PC running on my home network as a webserver. Trying to retire it by replacing it with a VM on a brand new workstation Santa brought me. Simple home hobbyist network consists of router, 10Gb switch and of course computing devices off of that.
The new machine is running Windows11 Pro, and via Hyper-V I have a CentOS 7 VM. I've configured the firewall to enable http service (and port 80) being accessible from outside my network. I'm running httpd. From behind my router/switch I can access the web server with no problem, from the host machine and other machines on my network). Alas - I'm unable to access this web server remotely/externally - even after turning of the VM's firewall and ensuring port forwarding was properly pointing to IP:80 from my router. I have been scouring the web/forums/etc. for days now - nothing I've tried seems to work.
Also, I was careful in ensuring the Hyper-V settings for a virtual switch are pointing to my actual hardware NIC and set accordingly as found here and other forums (see attached image for details).
From all the "experimentations" I've tried - it's seems like the port is just not being forwarded from my router properly. So it's really pointing towards my router at this point. BUT - I can and have configured real hardware before (over decades) with no problem. Since I'm NEWB to Hyper-V and VM's - I'm worried some setting may not be correct.
Thus - reaching out to anyone with similar experience who's solved this problem. Thanks in advance.
Here's a graphic in which I captured some of the many things I've tried to no avail.
settings, etc.
I red lot of post about this question without find the good answer. The situation is simple, I have a server (Go) running on Ubuntu 14.04 (VMware Workstation 12.1.0 Pro). It listens on the 8001/8002 ports. From the host of the VM (Windows 10), I can access it from the host (Windows 10) but from my Xamarin Application or the others computers, I can't access this server.
I tried lot of things such as port transfer, edit of the NAT propreties (of the VM) and edit of the vmnetnnat.conf file as well. I tested about bridge connection but I didn't find the way to make it works with this way. etc
I also did transfer port from my internet box to get the access by IP instead of private network address (192.168.XXX.XXX) but it didn't works too.
If anyone can help, thank !
By default your Workstation configures your VM in either NAT or Host-only or event in Custom network configuration what means your host computer (you Windows 10) is the only endpoint which can access this box without any additional configuration in your router.
I would suggest you the easiest way is to use "Bridge" configuration what you mentioned below by getting (perhaps DCHP) IP schema from your parent router (the one gives your Windows 10). Thus your VM will be available across your "Home network", Once done, check your ICMP (pings) from Windows 10 to your VM, make sure you can see it.
Second point is that your 8001/8002 ports might be closed by firewall (iptables) in your ubuntu / Windows 10. You probably want to check your both firewalls as your traffic is being routes by "Virtual router" of Workstation.
I don't know what's wrong with it. Here is a screenshot.
(first image is what i've done in terminal to log in my EC2 server
second image is what i've set in "System preference --> sharing --> remote login)
Yosemite is my OS. Please help me,
Assuming that you have the right key file, you could be running into some security settings issues. Check your security group and make sure that the server is accepting connections on port 22 from all addresses. Also, I generally use the IP address when SSHing into an EC2 box instead of a url, as it is much shorter and more concise. Also, make sure that your server is running Ubuntu. I know that different OS's on EC2 use different default usernames.
Your default username can be found at this page:
http://alestic.com/2014/01/ec2-ssh-username
In the end, your ssh command should be something like
ssh -i otkey.pem [username for your os]#[ip of your box]
Hope this helps!
You've got the right command for an ubuntu server. Check to make sure that security groups are configured and that you don't have Network Access Control Lists configured on your VPC. The configuration you made to the settings of your laptop are to open it up for people to log into your laptop, they don't do anything to facilitate you connecting out.
I am migrating my vCenter Server 5.5 to a new server (databases have already been moved to a new SQL server and all is OK on existing vCenter Server 5.5 implementation). When I begin the simple install process on the new vCenter Server host the Single Sign-On component presents me with an IP address of 10.10.10.117 as the ip address of the FQDN file01.xxxxxxxxx.com. This is the iSCSI interface address. I need it to use the 10.1.1.17 ip address that is the address of the production NIC that the ESXi 5.5 hosts will be communicating with. I have already changed the binding order of the NIC cards and flushed the DNS cache. I also added file01.xxxxxxxx.com with the proper IP address to the hosts file and also file01 to the hosts file. Still, during the install, 10.10.10.117 is discovered. Thanks in advance! Babak C.
Just to get a quick clarification...are you freshly installing vCenter 5.5? Or are you migrating an existing vCenter server to a new host and using the update utility to upgrade? I am assuming you are doing a fresh install based on your details about the SQL server and SSO. Here is my suggestion, in case it is a fresh install.
We had a similar problem with 5.5 on a new install where the IP address that was discovered during the actual vCenter Server install was that of the public facing NIC which we never use for management traffic (it's for internet access on the vC server, for update manager, etc.)
The strange thing is that there had NEVER been an entry in ANY of our DNS servers for that interface. So, after looking into it a little bit, I started thinking the IP that was returned during install was not a DNS result at all. Rather, it was (most likely) simply gathered from the interfaces on the Server based on binding order (e.g. which NIC has the default gateway.)
In order to save having to uninstall and clean up a major mess if the install completed wrong, we stopped and got in touch with VMware support. They suggested we clear all of the temporary files both in the standard "temporary" folder on windows as well as under /ApplicationData/vmware/xxx, where 'xxx' would be whatever product is giving you trouble and HAS NOT been FULLY INSTALLED* (e.g. you started the install and noticed the incorrect IP, so you terminated the installer and there is metadata and cached files remaining from the partially run install).
Basically, what we had to do, was clear the temporary files and then make sure the NIC Binding Priority was correct (so you should check in Network Adapters|(press-alt)|Advanced Settings. Make sure the correct binding is checked (e.g. if you don't use IPv6 on the private network, clear it) and make sure that the Windows Network is at the top of the priority list on the second pane of the advanced settings. This helps tremendously with SSO by making sure the Windows Network stack is the first queried when you are signing in and SSO must submit a kerberos ticket to the AD DC for validation.
It is possible, that once you delete the partial install files and temporary files and fix the network settings (probably be a good idea to reboot as well), the next time you run the installer you might have success.
I will try to check this post later to see if it helped you at all... or it I just succeeded in making your life even more difficult (which I certainly hope not!) :)
One more thing...prior to initializing the installer, open up a PS session, perform ipconfig /flushdns and then ping the hostname of your vCenter server in order to get it in the DNS cache. You should also perform the following:
nslookup
NS>{your vcenter server IP address}
/* make sure the resulting hostname is correct..this ensures your PTRs and rDNS is working correctly. vCenter HEAVILY relies on accurate reverse DNS configuration...then do the following lookup for forward DNS */
NS>{your vcenter server FQDN}
Hope it helps. Best of luck my friend!
SIETEC
I am a GIS tech trying to get migrate to Geoserver, unfortunately I am not very savvy on web hosting.
I installed the Windows version 2.3.1.
I was able to build by map and access it through localhost:8080\geoserver\www\
I take that to mean that the jetty server it working.
I understand that I should be able to replace my local IP address where "localhost" is and be able to access it from another computer via Http.
I can't figure out the next step. I have found great tutorials on every part of geoserver process except this. And the user guide does not get into this either.
My set up: Cable Modem > Router > PC with Geoserver
What I have tried: Setting up a virtual server on my router. I have tried changing by router to inbound port 8080 to private port 8080
I also tried 80 to 8080
and 80 to 80
I also tried windows firewall exception. and turning off windows firewall.
I read about using appache tomcat but I have not installed it because it seems that jetty is working (at least as a local host) and I don't want to put another program on 8080. And to my understanding it can work stand alone but I really honestly don't know no.
I am must be missing some vital piece of information on how to do this. I am hoping it is just so basic that it wasn't worth mentioning on tutorials.
Thanks
Karin
This would be a GeoServer configuration question, but since its deployed in jetty the solution is likely in the underlying jetty configuration. That being said it is a guess on my part (the jetty side of things) how they set up this distribution, but if you find a jetty.xml file, perhaps under an /etc directory then you should be able to edit that file and set a proper host in the configuration.
Seriously though, this has to be a pretty common GeoServer question so I bet they have some documentation floating around for setting this properly in their software distribution.
http://docs.geoserver.org/latest/en/user/webadmin/basics.html
That seems to indicate it might be dependent on your container configuration, in which case look through how ever they are configuring jetty for a Host setting that is likely hardcoded to 'localhost'