I am trying to build qemu on Debian buster for amd64 with --target-list="i386-softmmu x86_64-softmmu".
But getting error
ERROR: pthread check failed
Make sure to have the pthread libs and headers installed.
Searched on internet and stackoverflow and checked that I have installed the following libraries that were told to provide the pthread libs and headers.
libc6 libc6-dev libpth-dev libpthread-stubs0-dev
What am I missing? Which Debian package to install to solve this issue?
Thanks in advance.
With Debian based distributions, the easiest way to ensure you have all the build dependencies installed is to make sure your apt sources.list includes deb-src lines, and then use "apt build-dep qemu". This will install everything needed to build the distro's version of QEMU, which is generally pretty much what you want for a build from source.
If you've done that and are still seeing issues: make sure you're building a recent QEMU and not some ancient version.
Related
I have a problem and I can't seem to find a solution to it. I am building a project using gnuradio and in the process of building an OOT module i always get the following error after $cmake ../ (I followed the instruction from the GNU site though)
$ cmake ../
-- Build type not specified: defaulting to release.
-- Could NOT find Boost
CMake Error at CMakeLists.txt:63 (message):
Boost required to compile trial
-- Configuring incomplete, errors occurred!
Please any help will be deeply appreciated (And please I am a noob so kindly have it easy on me).
Enable the debug output for the FindBoost module when invoking cmake, it'll help you pinpoint which packages are missing:
$ cmake -DBoost_DEBUG=ON ../
Here's a similar problem on kubuntu 14.04: https://github.com/antoinet/gr-acars2/issues/2.
The solution was to install the missing libboost-filesystem-dev and libboost-system-dev packages.
The basic issue is that 1 or more Boost components (e.g., system, threads, filesystem) is/are not being found, so you need to get it/them installed. How you do the install depends on your OS. So ... what OS are you trying to do this on?
Also, how did you install GNU Radio in the first place? Any package manager with its salt will make sure dependencies are installed correctly along with the actual package. If you used MacPorts or apt-get or yum to install GNU Radio, Boost should have been installed.
Related: Have you considered signing up for the GNU Radio discussion email list? This question would be quickly answered there. https://lists.gnu.org/mailman/listinfo/discuss-gnuradiosome
I get the following link error when I'm compiling a small function using ncurses for an Ubuntu 12.04 running on arm. The error is
arm-linux-gnueabihf/bin/ld: cannot find -ltinfo
A lot of hints are floating around on what to install, but I can't seem to find any packages that does the trick for my arm box.
I have done
sudo apt-get install libncurses5-dev
And this does not contain the tinfo library. Other suggestions usually result in the library is "not available but referred by another package" or "has no installation candidate".
All help is appreciated
/Henrik
As mentioned by lucasg
sudo apt-get install libtinfo-dev
solved the same problem for me.
When you cross compile the nurses library, configure this option --with-termlib. It shall install libtinfo into your target location.
I'm trying to install Octave-3.6.2 from source on Ubuntu 12.04 with KDE desktop but when I run the Octave configure script I get this error
BLAS library was detected but found incompatible with your Fortran 77
compiler settings
I used ./configure F77=gfortran as was suggested by numerous web searches and I've ensured that the alternatives system F77 files are moved out of harms way as per the comments in this SO post. The installed BLAS libraries are those installed by the package manager.
What does the error mean and how do I remedy it?
Try installing the Package liblapack-dev, libblas-dev, and if it exists, libblas-64. While not Ubuntu, I had the same issue and needed to install the fedora fc20 equivalent packages which are blas-devel, blas64-devel, lapack-devel, and lapack64-devel. The standard routine for getting the build dependencies is
sudo yum-builddep octave
While that installed most of the dependencies, I needed to follow with the following before it would completely configure. This is from an almost scratch Fedora fc20 install with updates as of 10/23/2014.
sudo yum install lapack64-devel lapack64
sudo yum install gl2ps-devel qrupdate-devel qt-devel qscintilla-devel java-devel
Although I did not explicitly list the blas-devel and blas64-devel packages, they were installed as dependencies of the libpack packages as was libpack-devel and plain libpack.
I suppose for Ubuntu it may be apt-get. Either way, here is another post that talks about an earlier version of Ubuntu.
BLAS and LAPACK libraries required for compiling
I fixed this problem by moving the BLAS to /usr/lib64.
for slackware recompile blas using -libdir=/usr/lib64
Run sudo apt-get build-dep octave
This will install all dependencies for octave
I was compiling octave-4.0.1 on openSUSE-12.3_x86-64 and met this problem. Before this, the blas lib (libblas3) was already installed. Then I installed the 32bit lib (libblas3-32bit), nothing changed. Then I installed the package named "blas-devel", it's resolved.
That package includes these files:
/usr/lib64/libblas.a
/usr/lib64/libblas.so
/usr/lib64/libblas_pic.a
I tried to compile wxWidgets-2.9.2 with opengl support by calling
configure --with-opengl
But it failed when the configure script tried to locate the lib files of opengl
checking for GL/gl.h... yes
checking for GL/glu.h... yes
checking for -lGL... no
checking for -lMesaGL... no
configure: error: OpenGL libraries not available
However, I checked /usr/lib and found that there is libGL.so in that directory. Actually, before trying to compile wxWidgets-2.9.2, I had written several opengl programs and all were successfully compiled and run. Could someone help me to fix this?
This is actually a bug in the configure script, please see
http://trac.wxwidgets.org/ticket/13375.
The solution is to download the latest codes from
http://svn.wxwidgets.org/svn/wx/wxWidgets/trunk/
Or you can select to overwrite only the configure,acinclude.m4 files.
Have you tried installing the free implementation?
sudo apt-get install libglw1-mesa libglw1-mesa-dev
Are you running proprietary drivers from Nvidia or something? I think it messes around with the OpenGL environment while installing. Perhaps, it is worth trying to go back the the opensource ones if this is the case.
There is also a know issue OpenGL libs not located by 'configure' in debian testing
First of all check if opengl libs are installed! them --->
we need to change Configure file on source! check this link:
http://trac.wxwidgets.org/ticket/13376
the same issues arise on ubuntu 12.04!
I also met the same problem when trying to compile wxWidgets3.1.0 --with-opengl on Debian Jessie x86_64. I tried
SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s#include#$wx_cv_std_libpath#g` /usr/$
wx_cv_std_libpath /usr/lib/i386-linux-gnu /usr/lib/x86_64-linux-gnu"
and
pkg-config --variable=libdir gl
/usr/lib/x86_64-linux-gnu
and
sudo apt-get install libglw1-mesa libglw1-mesa-dev
but:
OpenGL libraries not available
I then tried
sudo apt-get install glutg3-dev
but:
glutg3-dev is not found.
So I searched for the alternative to glutg3-dev in Jessie and I tried
sudo apt-get install freeglut3-dev
then it worked!
Installing mesa didn't help for me, but installing glutg3-dev did the trick
sudo apt-get install glutg3-dev
I installed the wxWidgets source code, compiled it and am linking the libraries thus obtained with my application code. Now I need to use OpenGL in my wxWidgets application. How do I enable this?
For building on Windows with project files:
Assume $(WXWIDGETSROOT) is the root directory of your wxWidgets installation.
Open the file $(WXWIDGETSROOT)\include\wx\msw\setup.h
Search for the #define for wxUSE_GLCANVAS.
Change its value from 0 to 1.
Recompile the library.
For building on Linux and other ./configure based platforms:
Just use ./configure --with-opengl
(A mashup answer from two partial answers given by others)
If you're using configure to build wxWidgets you just need to add --with-opengl to your command line.
Just to add a little bit... If you're on linux you need to watch the logs when running configure. If it can't find opengl dev packages then it will turn opengl off with one line of warning which is easy to miss.
run it like this to make it more obvious what development libraries you're actually missing (it looks like the --with-opengl is on by default in 3.0.0 and possibly earlier versions of wxwidgets, but it can't hurt to include it I suspect).
./configure --with-opengl > configure.log
Once configure can find all the dev libs you think you're going to use you need to rebuild wxwidgets:
make
sudo make install
I had to install these on linux mint to make wxwidget's configure happy as far as opengl was concerned (and should also work for ubuntu) to get the dev libs I needed.
sudo apt-get install mesa-common-dev
sudo apt-get install freeglut3-dev
(Assume $(WX_WIDGETS_ROOT) is the root directory of your wxWidgets installation.)
Open the file $(WX_WIDGETS_ROOT)\include\wx\msw\setup.h
Search and find the option wxUSE_GLCANVAS. Change its value from 0 to 1.
Recompile the library.