I have an S3 bucket, and I want to know which AWS resources have permission to access it (security audit). There is nothing in the bucket policy itself - permissions are defined using IAM policies on the resources.
I have a LOT of different components on this project. Is there a way to find all the resources that have permissions for this bucket? Or do I have to check the IAM policies on every single resource in the account?
Related
I have an IAM user that has full S3 access (i.e. can perform any S3 actions on any S3 resource within the AWS account). This user has created a bucket and put some files in it. The bucket has a policy which just contains an Allow rule that grants access to a different IAM user, in the same AWS account. Public access is turned off for the bucket.
Should the first user be able to access objects in this bucket? If so, is that because they created the bucket, or because they're in the account that owns the bucket? Is it possible to limit access to a bucket for users within the same AWS account?
S3 is one of the few services with resource policies, in this case they are called bucket policies.
A user in the same account has access to a (S3) resource if
nothing explicitly denies the access AND
either the bucket policy grants access OR the user / entity has a policy attached that grants access
If you wanted to restrict a bucket to a single user / entity you would
need to write a bucket policy that specifies that using a Deny statement for every user except the target one AND
either add a statement to the bucket policy or a policy attached to the user / entity granting access to the bucket.
The standard doc for understanding policy evaluation logic is this. There are other, more complicated ways to achieve your goal using e.g. permission boundaries and SCPs but they are probably overkill in your situation.
After creating an S3 bucket in AWS - I want to find out how permissions for Read and Write access to the S3 bucket should be provided?
I am thinking that IAM user permissions and S3 bucket permissions are different. What I am mean is - an IAM user with no permissions on AWS can be granted access to the S3 bucket by just adding him to the S3 buckets permissions for read or read+write accordingly. And S3 permissions have got nothing to do with IAM permissions>
Is the above understanding correct? Please correct and elaborate if the above is wrong?
And S3 permissions have got nothing to do with IAM permissions
This is not the case. The effective permission for the bucket and its objects are union of the IAM identity based permissions (i.e. those attached to IAM user,role, group) plus bucket policies plus other permissions (SCPs, IAM boundaries), which I don't mention for simplicity.
By default bucket and objects are private. You can Allow access to them using either IAM policies, bucket policies or both. Effective permissions will be the union of all these individual permissions. This means that you can use bucket policy to grant access to object1 and IAM policy to grant access to object2 to the same IAM user. The said user will be able to access both objects.
This behavior changes when there is Deny, as deny always wins. So an IAM user can have Allow in IAM policies to a given bucket, but the bucket can have Deny for that user. The result will be Deny always.
Subsequently, all these mean that bucket polices and IAM permissions should be considered together and are inter-connected with each other. Thus, you can't say that "S3 permissions have got nothing to do with IAM permissions".
An IAM User has no permissions by default. If they wish to do anything via an authenticated API call, they must be granted permission to do so.
Even if an Amazon S3 bucket policy grants access to an IAM User, they cannot access content in Amazon S3 unless their IAM permissions allow them to make the associated API call (eg ListBuckets or GetObject).
Please note that I am referring to an authenticated API call, not an Anonymous HTTP requests via a web browser URL.
A Bucket Policy can grant "public access" by referring to "Principal": "*" (which means that even unauthenticated users can retrieve content via a URL), or it can grant access to specific IAM Users and IAM Roles. However, if that user/role doesn't have permission to call any S3 Actions, then they cannot access the bucket.
A Deny policy from either IAM or a Bucket Policy takes precedence over Allow. So, an IAM User with permission to access a bucket can be denied by the Bucket Policy, and vice versa.
In AWS IAM is the place to generate all policies and to assign them to users and/or roles.
As a general rule, AWS recommends using S3 bucket policies or IAM policies for access control.
"S3 ACLs are a legacy access control mechanism that predates IAM. However, if you already use S3 ACLs and you find them sufficient,
there is no need to change."
By default, a user/role is assuming the policies provided by an SCP which stands for "service control policy". It is very similar to the policies you probably faced but this is provided by the account level/or organization level.
Among all options to generate and assume policies, there is a logical "and" which mean that in case there is at least 1 "deny" among the policies it will restrict access of a user/role to a specific bucket for instance in your case
I keep seeing posts that refer to setting a policy and while they mention S3 buckets the policy they are often referring to are IAM policies.
In my case I want to control access to my S3 bucket only by an actual "S3 bucket policy".
My current path is :::mybucket, which has /thing1/ and /thing2/
If I wanted a bucket policy that allows a CLI user the ability to list and get /thing1/* but not /thing2/* how would this be done? I've tried my policy with all kinds of conditions, paths etc but nothing seems to work...
I always get confused in two but I wanted to add a IAM policy on S3 bucket.
Basically I have created an output bucket for Amazon transcriptions but it seems I need to add IAM role to allow Transcription job to write to the bucket. I think if I can attach AmazonTranscribeFullAccess to S3 bucket, it will work but I am unable to attach this policy. Could you please advise how can I add this policy on the new bucket?
There are a few concepts you will want to dig deeper into to understand the difference between IAM policies and S3 bucket policies. A detailed guide is: https://docs.aws.amazon.com/AmazonS3/latest/dev/how-s3-evaluates-access-control.html
You can attach IAM policies to Users, Groups and Roles, and you can attach bucket policies to S3 buckets.
Try adding S3 access to the user/role that you are using to run the transcribe job.
I have been reading a number of docs and watched number of videos, but I am still very confused about IAM Roles and Bucket policies. Here is what confuses me:
1) I create a bucket. At that time I can make it public or keep it private. If I make it public, then anyone, or any Application, can "see" the objects in the bucket. I think the permissions can be set to add/delete/get/list objects in the bucket. If this is the case, then why do I ever need to add any IAM Role for S3 buckets, or, add any Bucket policy (???)
2) At the time I create a bucket, can I give very specific permissions to only certain users/applications/EC2 instances etc to all or part of the bucket? e.g. App1 on EC2-X can access subfolder A in bucket B1.
3) Coming to IAM Roles, an EC2 role that gives full S3 access- what does it mean? Full access to any bucket? How can I restrict an app running on an EC2 to only certain buckets, with only certain restricted permissions (see #2) above)? Do all Apps on the EC2 have full access to all buckets? At the time of creating a bucket, can the permissions be so set that an IAM Role can be overruled?
4) Finally, what do Bucket Policies do in addition to the above IAM Roles? e.g is 'AllowS3FullAccess' a "Bucket Policy", or an "IAM Policy"? Why differentiate between types of policies- policies are just that- they define some permissions/rules on some objects/resources,as I see it.
Thanks for any clarifications.
- a newcomer to AWS
I think you are confusing permissions for resources with IAM entities.
i) There are resources (S3 bucket, EC2 instances etc.) owned by the AWS account and these resources can be accessed by IAM users, IAM roles or other AWS Services (can be from same or different account)
ii) We manage who can access and their permission level with policies
iii) Policies can be identity based (attached to IAM user/group/role) or resource based (attached to S3 bucket, SNS topic)
iv) Resource based policy will have a Principal element but the identity based policies will not have that (because the attached IAM entity is the Principal)
v) Permissions start from default deny, allow overrides the default deny and an explicit deny overrides any allow
vi) Final access will be determined by combination of all policies
To answer your questions:
1> We cannot add (or attach) an IAM role with an S3 bucket. If you want your bucket should be public (which is not recommended but need to do it till some extent if it's in use for static website), then you can keep it public
2> It is not possible while creating the bucket. You have to do it after creating the bucket via IAM and/or S3 bucket policy
3> If an IAM role has AmazonS3FullAccess, the role can (Effect:Allow) call any S3 API (s3:) for any S3 resource (Resource:) in your account (provided they don't have cross account access).
If multiple applications run on an instance with an IAM role attached and are using credentials provided by the role, their permission will be same.
4> I don't know where you got the reference AllowS3FullAccess but we cannot confirm unless we know the exact JSON. If it is attached to a bucket or has the Principal element, it is a bucket policy.
You can use IAM and Bucket policies based on your need. Usually bucket policies are used for cross account access or if you want to manage S3 permission policies in a single place.