This is a fairly general question regarding the Code::Blocks IDE, more specifically, version 20.03. It is fairly simple to create a console application of any kind using this IDE for some purpose. However, based on my experiences, it requires a little more effort to run this file on its own, outside the building environment of the IDE. A solution to this, which can be found online, is adding to Windows environment variables, the path to three DLL files, which come with the software when installed. They are titled as follows:
libgcc_s_seh-1.dll
libstdc++-6.dll
libwinpthread-1.dll
I would simply like to know why these files are required in specific and perhaps what the code they house does, purely for understanding purposes.
Related
I've used C++ for several courses in university but the libraries we used in these courses were quite simple to install. When we came across libraries which required a bit more complex installation, our teachers always provided detailed instructions.
This time I'm doing a project on my own. I have downloaded libraries for my own projects in the past. Sometimes the install was easier, sometimes I had to search for hours to do things most people here would do in 5 minutes.
I did some studying to remember some stuff about the compiling process, what dynamic and static libraries are, etc. I feel I understand the most part but it didn't really help me with my efforts to install some libraries. Some people in Github provide instructions for newbies like me, but others, understandably, don't.
I'm saying a lot so I'll get to the point. I will provide links for the library I'm trying to install but in case I'm not allowed to, please let me know so I can rewrite this in a way that is allowed.
I'm trying to install libccd so I can then install fcl. In the instructions 3 ways are mentioned:
Using Makefile
Using autotools
Using Cmake
In all 3 methods, I see specific commands like this :
First of all, where am I supposed to write these commands?
I don't even know how to search this. So, I tried installing with methods I've previously used.
Here are the steps I took:
Downloaded the whole repository.
Made a solution for Visual Studio with Cmake-gui (that's all I know how to do with Cmake,unfortunately it usually was enough so I never learnt more)
Compiled the code in Release mode, which should give me a lib file.
Now,in my own project, I added the relevant include directories of the repository I downloaded and the library directory for the lib file which was produced.
I'm not sure about my last step. I'm pretty sure if I did the installation as proposed in the link(and as required by fcl), I would have a new folder for the library including just an include folder and a lib folder. Now I'm just searching for the correct include files and the lib file in subfolders of subfolders hoping I include the right ones. I'm a bit lost.
I'd really like some general steps(if there are) to installing a library. I know each library has its own ways but I assume the general idea with Cmake or Makefile should be the same. I have tried searching online but I didn't come across a good or detailed enough tutorial. I really don't wanna waste any more days trying to install libraries and I don't want to end up asking here again.
UPDATE:
It looks like there is no standard way to install libraries. Since I'm getting 'close votes' I'll include a specific question:
Are the steps I took correct? What should I do next?
I'm trying to install libccd so I can then install fcl. In the instructions 3 ways are mentioned:
Using Makefile
Using autotools
Using Cmake
In all 3 methods, I see specific commands like this :
First of all, where am I supposed to write these commands?
These instructions are for a UNIX-like system. Makefiles, autotools... these are UNIX things. You'd typically write those build commands into a console window on something like Linux or a Mac.
CMake is a bit more cross-platform. You can find out how to invoke CMake on other SO questions.
You can get Makefiles and such to work on Windows, using projects like Cygwin and MSYS. I'd generally recommend you avoid that unless you really need it.
I'm not sure about my last step. I'm pretty sure if I did the installation as proposed in the link(and as required by fcl), I would have a new folder for the library including just an include folder and a lib folder. Now I'm just searching for the correct include files and the lib file in subfolders of subfolders hoping I include the right ones. I'm a bit lost.
This is where no "general" advice exists. Different authors put their output in different places. If their instructions didn't include this information, you're already doing the right thing. If you get really stuck, you can always just ask them.
I'd really like some general steps(if there are) to installing a library.
No such thing exists, but where these industry-standard tools are involved, you can usually go on general documentation for those tools, or from memory.
I also suggest you shop around for a general book on programming, as general principles should be covered in any good one of those.
I'm lost here and I have no clue how to proceed. This is not a question about how to make my program work, this is a question about how to stop wasting my time.
My programming environment is Visual Studio 2013 on windows, in C++.
I use 3 libraries extensively, namely: boost (using dynamic linking), OpenCV, and Qt.
During the development, I have configured VS to look at those 3 libraries by default for include and .lib. I have also added the 3 folders containing all the dlls to my PATH environment variable.
It works, but it is sometime painful, let me explain you when.
First hassle: Anytime I have a LNK error telling me I miss a function, it is usually on OpenCV since it has only one include file referencing all the functions. I have to look at OpenCV's source code to see what module this function belongs to and to know what I must link my program to.
Second Hassle: When comes the time to deploy my application, I have to ship it with all the relevant dlls. To know which one I need, I open dependency walker and try to forget nothing, I have then to test it on a different computer because 102% of the time I have missed a couple, and then I have to configure my Installer generator to include all those one by one.
Third Hassle: To ease a little bit the process of configuring a new development machine, I have recently switched to NuGet. It is great, I add boost with a couple of clicks to any project. But now my boost DLLs are everywhere, I have one folder per boost library, and since there are dozens of those I can't even add them all at once to my PATH now, so I have to move them manually to the appropriate folder, and that is really not what I want to do with my not-so-precious-but-who-are-you-to-judge time
I have looked around and couldn't find any good practice regarding this issue, maybe because they are too obvious, or too specific to a particular setup.
How do you do? How would you do if you were me?
We put all our external dependencies in version control along with the code. This ensures that all code can build "out of the box" on any of our development machines and also ensures that for any given version of the code, we know exactly which dependencies is has.
The best way to check for missing dependencies is how have a good automated test suite, if you've got comprehensive converge then if your tests pass you must have deployed the required libraries.
In terms of linking to the appropriate libraries, unfortunately, that just sounds like an issue with the structure of OpenCV (I'm not familiar with OpenCV). I tend to use dumpbin under Windows and nm under Linux to easily grep for symbols when I get link errors with an unfamiliar library.
The situation is the following: I have the source code of one programm (lets call it programA) (written in C and C++), as well as the CMakeLists.txt and CTestConfig.cmake files. I already installed programA using CMake's graphical user interface and, as it is obvious, it worked. It created the .exe file (I'm working on Windows 7 OS).
The problem is that, right now, I've been asked to edit the program (and so, I must be able to edit the code and degugging it as changes are made). I also need to compile it but not in .exe anymore but in .dll so I can add it to a website we have.
I've read in forums that CMake can compile programA into a .dll if I need to, but as I would need to make some changes I consider that CMake debugging is not as useful and easy as using entirely VS. From the little I know from CMake language, the CMakeLists.txt is mainly used to check the OS of the user as well as adding some libraries in case they are not found.
I have to admit I have no idea in programming CMake directives, as I have been working with ASP.NET, C, C++ and C# mostly. Then, my idea is to try to work only in visual studio 2010 instead of using cmake as well, so once I have the program 'adapted' to VS and can be compiled just using VS, I'm ready to start my job. So the question I have is how can I perform the same task CMake did just using Visual Studio (Is there any way of implementing CMake directives in VS?), can VS compile by receiving as an argument something similar to that CMake.txt file (though it needs to be translated into another language)?
To skip the use of CMake I tried to copy the source code into a new project in VS. However as it does not use the CMake directives when compiling, it gives several errors, most of them related to the fact that some headers.h can't be found (cause they might be in a subfolder). And there are so many subfolders to add the paths to the predefined directories of search that it would take ages.
I'm sorry I can't be more precise in my explanation. I'm good at programming little projects on my own, but it's the first time I have to work on other's programm. Please don't hesitate to ask if anything was not properly understood
I would appreciate a lot any suggestion / advice /guidance you can give.
To make a dll, use add_library command and the SHARED keyword
add_library(mylib SHARED ${files})
this is easy with CMake, don't go back in visual that will be harder at the end
The Good News
Fortunately, cmake can generate VS Projects automaticaly for you (this tutorial s specific for OpenTissue, but Steps 1 to 3 should be the same for you).
The [not so] Bad News
Depending on the complexity of the project, VS Projects automaticaly generated by cmake can get pretty nasty, to the point of illegibility. It will, for example, hard link any library dependencies using the specific paths of your machine, so the project will most certainly not be portable across setups. In any case, that's the intended bahavior, because the primary idea of supporting this generator is simply making it work, thus allowing users to easily compile projects using MSVC, so there's not much you can do here. Nonetheless, it should work in your machine and will certainly be a great starting point for you, just create a project yourself from scratch copying the relevant parts out of the automatic generated version.
I'm a C++ beginner and I'm starting to develop my first cross-platform C++ project. I need to use platform-specific calls (Win32 and POSIX) so I need to compile frequently both in Windows and Linux.
Whit single-platform projects I'm using, until now, KDevelop in Linux and Visual Studio 2012 in Windows.
How can I use two different IDEs in two different Operating Systems with the same project?
Should I use a single, cross-platform, IDE?
Should I learn CMake (or similar) and configure it to work with both IDEs?
Could/Should I host my code in the web and sync automatically with offline projects?
Alternatives?
Thanks in advance to everyone.
EDIT:
Just for clarification, the project will be a simple server for a scholastic protocol. There will be a client asking for upload/retrieve some files to/from the server.
With scholastic I mean that, for example, I have to use pthreads/win32 threads instead of an higher level C++ threads library.
Maybe - really depends on what you feel most comfortable with. As the project is non-graphical, all the IDE gives you is editing of files and compilation. So you can build the project on one machine with the IDE there, and then move the sources to another machine for compiling there.
I personally would just have two makefiles, one for Linux and one for Widnows. Makes life fairly simple [you could have a "outer" makefile that picks the right one based on some clever method].
Yes, you should find a version control system that works for both Windows and Linux (git, mercurial, subversion, bazaar and several others). That way, not only do you have a central repository [you can use either of your machines as "server" for any of these], but it also allows you to keep track of your changes. Definitely worthwile doing!
There are hundreds of different alternatives. But the simpler you keep it, and the less complicated your tools are, the more time you get to spend on actually programming your project, rather than, for example, figure out why CMake isn't building the way you want it to.
Also, make sure that you separate out all your system-specific code to one file per architecture. That way, it's easy to port to another architecture later, and it makes MOST of your code compile on both systems.
Typically, it's easy to adjust the IDE-specific project/build files to added/moved/deleted source files. Therefore, using a cross-platform IDE isn't that important.
You can do that, I think that CMake can also create project files for some IDEs that can then be used to build the project.
Ahem, if you want to host it online or not is your choice. What you should definitely do is to use some kind of version control. A bug-tracking system is also helpful. If you want to open-source the code anyway, using one of the existing hosting facilities is a clear yes.
Not really.
One comment though: You will have much more trouble making the C++ code portable. Building on top of a toolkit like Qt is a tremendous help. If you want to stay closer to standard C++, at least consider using Boost for stuff like threads, smart pointers, filesystem access. Good luck!
My recent experience suggest to take a look at Qt. The IDE (QtCreator) it's very good, and available on all major platforms.
I've used for a fairly simple project, that uses fairly complex components, like OpenCV and ZBar. I develop on Linux, copy the source to Windows, and recompile.
I had some trouble to setup OpenCV on both platforms, so I can't say it's super easy, but it's working. Since you already know KDevelop, you should already know Qt.
I also put much value in recent trend that see Qt5 as the platform for Ubuntu on smartphones. I really hope to see this developing.
HTH
How can I use two different IDEs in two different Operating Systems with the same project?
Should I use a single, cross-platform, IDE?
No. I think this is a case of asking the wrong question. To make a cross-platform project, what matters is your build scripts and the system-neutral nature of your code. Sometimes it might help to have project files for your preferred IDE, but maintaining multiple project files for multiple IDEs will only make things more difficult and complex for you. Instead, you should focus on finding a build system that minimizes the amount of time you spend on project maintenance.
For that, CMake and PreMake seem to be two of the best tools to make that happen.
There are dozens of alternatives (like SCons, Cook, kbuild, Jam and Boost Jam, and many others), but since CMake and PreMake both generate project files and build scripts, they might be the best solutions.
Your mileage will vary.
Could/Should I host my code in the web and sync automatically with offline projects?
You should have robust source control that works everywhere you do. Git and Mercurial seem to work best if you use some kind of "cloud" hosting like Github or BitBucket, but they by no means require it. Depending on your work environment and team size, you may prefer Subversion or PerForce or something else, but that's up to you and your team.
it will help, you will quite likely need to debug on many platforms... Qt Creator, Netbeans and Eclipse come to mind.
Yes. cmake, or qmake for Qt maybe
Not technical question. Just use version control! github and gitorious are easy choices for open source project though.
Qt is a no-brainer choice for cross-platform C++ GUI app, and also decent choice for network app with no GUI.
I am currently working on an opensource C++ project. I don't have much experience in C++ as my daily job mainly involves with Java. I am now planning to release my C++ project and I would like to know how should I should I arrange the packaging of my project. E.g, in Java, all the class files are packaged into jar file. So what is the equivalent approach in C++? Is there any good practise for organizing the source code/binary? My target platform is Linux by the way.
Another question is I am currently using Eclipse CDT plugin for development and building. So is there anyway that I can extract build script from Eclipse project and use it as generic build script? Is there any good reference regarding C++ build/packaging? Thanks in advance.
Edited
To clarify a bit more, I think the release of my project can be considered as an application. It's a command line tool for software configuration management.
I am currently working on an opensource C++ project.
That simplifies many things. You should supply the build scripts for you project and support them for different use cases (learn about Makefiles, there are similar concepts like "target").
I don't have much experience in C++ as my daily job mainly involves with Java.
Most of the things you're used to have (and ask for right now) in Java are invented because they lack in C/C++. Learn at least something about dynamic(shared)/static libraries (.so and .a files to be simple).
I am now planning to release my C++ project and I would like to know how should I should I arrange the packaging of my project.
The "packaging of a C++ project" is something informal. You may supply the sources, build scripts and some project-files for the well-known IDEs.
EDIT: you've specified that you're building the command-line application. I believe all you need is to start from a simple Makfile for that application. The reference Makefile can be automatically generated by Eclipse. If you are planning to deploy your application as a stand-alone software, then you have to earn about packaging (rpm, deb, tgz).
E.g, in Java, all the class files are packaged into jar file.
There are no such thing as a C++ "package" compatible accross compilers (even the "modules" were rejected in the latest C++11 standard)
because there is no binary standard to encode C++ classes (ABI). On linux you're most likely going to use GCC (or Intel's compiler, or LLVM's CLang, or custom build of OpenWatcom or...),
but the version of standard library you are linking to makes the release of binary builds close to useless.
That is the reason for redistibuting source code.
So what is the equivalent approach in C++?
No clear answer here.
Is there any good practise for organizing the source code/binary?
Look at the large-scale projects, see the way they organize their builds. The term "build engineer" as an occupation emphasizes the difficulties of large-scale projects compilation/linking.
My target platform is Linux by the way.
This is also something of an incomplete description. "Linux" is a blurry term. You should speak about the Linux distribution, compiler toolchain and package manager. E.g., Ubuntu 12, amd64, GCC 4.6 toolchain, APT package manager.
There are different "linuxes" built around the same kernel source. There are different compilers. There are at least three major package managers to consider: Debian/Ubuntu(deb,apt), Red Hat(rpm), Slackware(tgz).
Another question is I am currently using Eclipse CDT plugin for development and building. So is there anyway that I can extract build script from Eclipse project
There's a sort of "meta-technique": you write a "description" of your project and then a tool generates the project-file and build scripts for your sources. Have a look at CMake. Since you're on "linux", try looking at the somewhat standard way of autotools (autoconf).
Is there any good reference regarding C++ build/packaging?
You should start by building your application and then move on to the deployment issues. C/C++ is a hard-to-learn legacy with a lot of subtleties which are avoided in Java.