I have a few different projects I work on. I use AWS and I use Kubernetes. I have a number of AWS credentials stored in my ~/.aws/credentials each with a label like
[account-1]
aws_access_key = x
aws_secret_access_key = y
[account-2]
aws_access_key = x
aws_secret_access_key = y
How can i toggle between them and easily set my config?
Currently I type aws configure in the terminal and manually paste the key/secret/regionn every time i want to switch between them.
When you hit the aws configure command, every time a new profile will be created in the ~/.aws/credentials. You can generate all the required profiles single time and then set environment variable based on the project you're working.
For example,
while working on project 1, set the environment variable
export AWS_PROFILE=account-1
and while working on project 2, set the environment variable
export AWS_PROFILE=account-2
If you are using zsh and oh-my-zsh with the aws plugin, you have the asp command.
asp account-1
and if your theme is set up nicely, your commandline prompt will tell you what account you're in.
In addition to #Gunjan answer you can also pass the profile name like this
$ aws ecr get-login-password --region us-east-1 --profile account-1
If you want to connect to multiple eks clusters
$ aws eks --region us-east-1 update-kubeconfig --name account-1-eks --region eu-west-1 --profile account-1
You need to have proper IAM permissions to run this command
This command will generate a kube config file in ~/.kube
move that file to some another location and add alias in your bash_profile or .zshrc like this line
account-1-eks='export KUBECONFIG=:/path/to/the/account-1-eks.config
Now reload your shell and you can switch using the alias like account-1-eks
You can repeat the steps for multiple accounts
Related
I have an assumed role which I assumed using aws sts assume-role CLI command.
I want to "unassume" this role and switch back to my aws credentials configured in my local system.
How do I acheive this?
I have tried doing so by going to the console and clicking the "Revoke Active Sessions" button, but that doesn't seem to be working. I tried rm -r ~/.aws/cli/cache too but in vain. Please help
There's a few things you can do:
You can unset the AWS environment variables in your terminal:
unset AWS_ACCESS_KEY_ID
unset AWS_SECRET_ACCESS_KEY
unset AWS_SESSION_TOKEN
You can reconfigure your aws configuration:
aws configure
However, you'll need to make sure there are no environment variables set for your AWS credentials. By default, the AWS CLI looks at your environment variables, then your config file, then your credentials file for credentials to use in CLI commands.
ok so I am baffled by this aws cli behavior. Basically what is going on is that when I set my AWS creds related in environment variable, AWS CLI forces me to pass --profile flag each time I use the CLI.
So basically when AWS_ACCESS_KEY_ID AND AWS_SECRET_ACCESS_KEY then I cannot run commands like aws s3 ls without passing --profile flag to it even though my profile is [default]
Also, jus to note the environment variable values and the values inside my /.aws/credentials
file is exactly same. Also, I tried to set both AWS_PROFILE and AWS_DEFAULT_PROFILE to default hoping that if all values such as keys,secret and profile are set in environment variable then I do not have to pass any --profile flag explicitly. Not having to pass this flag explicitly is very important for me at this point because if I am running an application which connects with aws and picks up default credentials, there is no easy way to pass profile information to that app.
my credentials file look like following:
[default]
aws_access_key_id = AKIA****
aws_secret_access_key = VpR***
My config file looks like following:
[default]
region = us-west-1
output = json
And my environment variables do have the same values for corresponding entries. for key, secret and profile at least.
Any idea on how to solve this issue?
The AWS CLI looks for credentials using a series of providers in a particular order. (https://docs.aws.amazon.com/cli/latest/userguide/cli-chap-configure.html#config-settings-and-precedence)
Specifically:
Command line options – You can specify --region, --output, and --profile as parameters on the command line.
Environment variables – You can store values in the environment variables: AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, and AWS_SESSION_TOKEN. If they are present, they are used.
CLI credentials file – This is one of the files that is updated when you run the command aws configure. The file is located at ~/.aws/credentials on Linux or macOS, or at C:\Users\USERNAME\.aws\credentials on Windows. This file can contain the credential details for the default profile and any named profiles.
CLI configuration file – This is another file that is updated when you run the command aws configure. The file is located at ~/.aws/config on Linux or macOS, or at C:\Users\USERNAME\.aws\config on Windows. This file contains the configuration settings for the default profile and any named profiles.
Container credentials – You can associate an IAM role with each of your Amazon Elastic Container Service (Amazon ECS) task definitions. Temporary credentials for that role are then available to that task's containers. For more information, see IAM Roles for Tasks in the Amazon Elastic Container Service Developer Guide.
Instance profile credentials – You can associate an IAM role with each of your Amazon Elastic Compute Cloud (Amazon EC2) instances. Temporary credentials for that role are then available to code running in the instance. The credentials are delivered through the Amazon EC2 metadata service. For more information, see IAM Roles for Amazon EC2 in the Amazon EC2 User Guide for Linux Instances and Using Instance Profiles in the IAM User Guide.
Another potential option for you would be to unset any colliding variables in your env and rely on the aws credentials file to provide the appropriate access credentials from the default entry.
I am trying to configure AWS CONFIGURE via AWS CLI on my laptop having Windows 10 professional. This is not the first time I am configuring AWS CONFIGURE. I already have many profiles settings.
I have enough free system memory and storage and have sufficient rights to run aws configure. I am using Python 3.6
Here is the detail, how I am trying to setup AWS CONFIGURE.
When I run this command again, it asks all the values again.
Even if I run an AWS CLI command using this new profile; to create a lambda function ( aws lambda create-function xxxxxxxxx --profile lambdaprofile ).
It gives below error.
The config profile (lambdaprofile) could not be found.
Please help me.
Some times this issue happens and AWS CLI is unable to set new profile and settings in config file.
Here is a fix of this issue.
Run below command from windows console.
notepad %USERPROFILE%\.aws\credentials
You will see last line of credentials file with overlapping line.
e.g in your particular case, it would be showing like below.
region = us-east-1[lambdaprofile]
aws_access_key_id = AKIAIGCOZJBAKIAIGCOZJB
aws_secret_access_key = gHZWwhUxRLtwQRUknGgHZWwhUxRLtwQRUknG
region = use-east-1
Similar issue would be in config file, which can be checked by opening this file.
notepad %USERPROFILE%\.aws\config
To fix this issue set [lambdaprofile] to new line, preferably add another empty line before [lambdaprofile]. It should look like below.
region = us-east-1
[lambdaprofile]
aws_access_key_id = AKIAIGCOZJBAKIAIGCOZJB
aws_secret_access_key = gHZWwhUxRLtwQRUknGgHZWwhUxRLtwQRUknG
region = use-east-1
Also do the same fix in config file. After fixing it, if you will run aws configure --profile lambdaprofile it should show the previously saved values in credentials and config files.
You may also check if values are saved or not with below command.
aws configure list --profile lambdaprofile
Alternately to the fix detail mentioned above, you can also set new profile directly with AWS CONFIGURE SET
e.g in your particular case.
aws configure --profile lambdaprofile set aws_access_key_id AKIAIGCOZJBAKIAIGCOZJB
aws configure --profile lambdaprofile set aws_secret_access_key gHZWwhUxRLtwQRUknGgHZWwhUxRLtwQRUknG
aws configure --profile lambdaprofile set region use-east-1
or
aws configure set profile.lambdaprofile.aws_access_key_id AKIAIGCOZJBAKIAIGCOZJB
aws configure set profile.lambdaprofile.aws_secret_access_key gHZWwhUxRLtwQRUknGgHZWwhUxRLtwQRUknG
aws configure set profile.lambdaprofile.region use-east-1
When I pull a clean Alphine Linux Docker image, install aws-cli on it and try to authenticate myself with aws ecr get-authorization-token --region eu-central-1 I keep getting the following error:
An error occurred (UnrecognizedClientException) when calling the
GetAuthorizationToken operation: The security token included in the
request is invalid.
I've already checked the timezone which seem to be okay, and the command works properly on my local machine.
These are the commands I run to set up aws-cli:
apk add --update python python-dev py-pip
pip install awscli --upgrade
export AWS_ACCESS_KEY_ID=XXXXXXXXXXXXXXXXXXXX
export AWS_SECRET_ACCESS_KEY=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Is there something obvious I'm missing?
You don't have permission to access those resources until you get permission to aws-cli, for that you can use the below steps.
Log into your AWS account, click on your account name, select my security credentials, click on access keys and download the credentials
Open your PowerShell as administrator and follow the commands.
$ aws configure
$ AWS Access Key ID [****************E5TA]=xxxxxxxxxx
$ AWS Secret Access Key [****************7gNT]=xxxxxxxxxxxxxx
It was an access issue after all! Turns out that if you create a new IAM user with full admin access it can't by default access the ECR registry you created using a different account. Using the IAM credentials from that other account resolved the issue.
In my case, my ~/.aws/credentials file had an old aws_session_token that was not updated by the aws configure CLI command. Once I opened the file with vi ~/.aws/credentials and deleted the aws_session_token entry, I no longer encountered the UnrecognizedClientException. I'm guessing that the AWS CLI first gives priority to the aws_session_token over the aws access key id and aws secret access key when running AWS CLI commands, if aws_session_token is present in the ~/.aws/credentials file.
Create a new account with AmazonEC2ContainerRegistryFullAccess permission.
Add this account to the .credentials file like this:
[ecr-user]
aws_access_key_id = XXX
aws_secret_access_key = XXX
Then next use following command:
aws ecr get-login-password --profile ecr-user
What worked for me is:
on the first part of pipe add the param --profile < your-profile-name >
and after that in every ECR command you need to provide that parameter.
My issue was caused by the fact that I had inactivated my access key in the AWS IAM Management Console earlier as part of an exercise I was doing. Once I reactivated it, the problem was resolved.
(Make sure you're in the right AWS region, too.)
I had same error message however I was using session based AWS access . The solution is to add all the keys given by AWS including session token.
aws_access_key_id="your-key-id"
aws_secret_access_key="your-secret-access-key"
aws_session_token="your-session-token"
add it into ~/.aws/credentials for profile you are using .
After a couple of hours , this is my conclusion :
If you want to use AWS_PROFILE makes sure that the rest of AWS env vars are unset (NOT empty only ... MUST be UNSET).
profile=$AWS_PROFILE
unset $(printenv |grep AWS_ | cut -f1 -d"=");
export AWS_PROFILE=${profile};
Then :
# with aws cli >= 1.x
$(aws ecr get-login --no-include-email --region ${aws_region})
# with aws cli >= 2.x
registry=${aws_account_id}.dkr.ecr.${aws_region}.amazonaws.com
aws ecr get-login-password --region ${aws_region} | docker login --username AWS --password-stdin ${registry}
Resolved issue after following below:
Go to AWS IAM Management Console
Generate credential in section "Access keys (access key ID and secret access key)"
Run command aws configure and set same downloaded credentials in Cdrive-User-directory.aws\credentials
It wasn't working for me. Out of sheer desperation, I copied the lines starting with export and posted them in the terminal and pressed enter.
Thereafter I wrote aws configure and filled in the details from https://MYCOMPANY.awsapps.com/start#/ >> Account >> Clicked "Command line or programmatic access".
Default region name: eu-north-1
Default output format: text
And then the login succeeded. Don't ask my why.
open the file ~/.aws/credentials (or c:\Users\{user}\.aws\credentials on Windows)
It might look something like the following:
[default]
aws_access_key_id = XXXXX
aws_secret_access_key = XXXXX
aws_session_token = XXXXX
Update the aws_access_key_id and aws_secret_access_key with new values and remove the aws_session_token. You can also update aws_access_key_id and aws_secret_access_key via the aws configure command, but this doesn't remove the session token.
Try running echo $varname to see if the environment variables are set correctly:
echo $AWS_ACCESS_KEY_ID
echo $AWS_SECRET_ACCESS_KEY
echo $AWS_DEFAULT_REGION
If they are incorrectly set, run unset varname:
unset AWS_ACCESS_KEY_ID
unset AWS_SECRET_ACCESS_KEY
unset AWS_DEFAULT_REGION
In my case, the region I wanted to use was not enabled. Addressed by enabling it at Account > AWS Regions -> enable (and wait patiently for some minutes).
An update, --profile must be added, I solve this.
I've got two different apps that I am hosting (well the second one is about to go up) on Amazon EC2.
How can I work with both accounts at the command line (Mac OS X) but keep the EC2 keys & certificates separate? Do I need to change my environment variables before each ec2-* command?
Would using an alias and having it to the setting of the environment in-line work? Something like: alias ec2-describe-instances1 = export EC2_PRIVATE_KEY=/path; ec2-describe-instances
You can work with two accounts by creating two profiles on the aws command line.
It will prompt you for your AWS Access Key ID, AWS Secret Access Key and desired region, so have them ready.
Examples:
$ aws configure --profile account1
$ aws configure --profile account2
You can then switch between the accounts by passing the profile on the command.
$ aws dynamodb list-tables --profile account1
$ aws s3 ls --profile account2
Note:
If you name the profile to be default it will become default profile i.e. when no --profile param in the command.
More on default profile
If you spend more time using account1, you can make it the default by setting the AWS_DEFAULT_PROFILE environment variable. When the default environment variable is set, you do not need to specify the profile on each command.
Linux, OS X Example:
$ export AWS_DEFAULT_PROFILE=account1
$ aws dynamodb list-tables
Windows Example:
$ set AWS_DEFAULT_PROFILE=account1
$ aws s3 ls
How to set "manually" multiple AWS accounts ?
1) Get access - key
AWS Console > Identity and Access Management (IAM) > Your Security Credentials > Access Keys
2) Set access - file and content
~/.aws/credentials
[default]
aws_access_key_id={{aws_access_key_id}}
aws_secret_access_key={{aws_secret_access_key}}
[{{profile_name}}]
aws_access_key_id={{aws_access_key_id}}
aws_secret_access_key={{aws_secret_access_key}}
3) Set profile - file and content
~/.aws/config
[default]
region={{region}}
output={{output:"json||text"}}
[profile {{profile_name}}]
region={{region}}
output={{output:"json||text"}}
4) Run - file with params
Install command-line app - and use AWS Command Line it, for example for product AWS EC2
aws ec2 describe-instances -- default
aws ec2 describe-instances --profile {{profile_name}} -- [{{profile_name}}]
Ref
https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html
IMHO, the easiest way is to edit .aws/credentials and .aws/config files manually.
It's easy and it works for Linux, Mac and Windows. Just read this for more detail (1 minute read).
.aws/credentials file:
[default]
aws_access_key_id=AKIAIOSFODNN7EXAMPLE
aws_secret_access_key=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
[user1]
aws_access_key_id=AKIAI44QH8DHBEXAMPLE
aws_secret_access_key=je7MtGbClwBF/2Zp9Utk/h3yCo8nvbEXAMPLEKEY
.aws/config file:
[default]
region=us-west-2
output=json
[profile user1] <-- 'profile' in front of 'profile_name' (not for default)!!
region=us-east-1
output=text
You should be able to use the following command-options in lieu of the EC2_PRIVATE_KEY (and even EC2_CERT) environment variables:
-K <private key>
-C <certificate>
You can put these inside aliases, e.g.
alias ec2-describe-instances1 ec2-describe-instances -K /path/to/key.pem
Create or edit this file:
vim ~/.aws/credentials
List as many key pairs as you like:
[default]
aws_access_key_id=AKIAIOSFODNN7EXAMPLE
aws_secret_access_key=wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY
[user1]
aws_access_key_id=AKIAI44QH8DHBEXAMPLE
aws_secret_access_key=je7MtGbClwBF/2Zp9Utk/h3yCo8nvbEXAMPLEKEY
Set a local variable to select the pair of keys you want to use:
export AWS_PROFILE=user1
Do what you like:
aws s3api list-buckets # any aws cli command now using user1 pair of keys
You can also do it command by command by including --profile user1 with each command:
aws s3api list-buckets --profile user1
# any aws cli command now using user1 pair of keys
More details: Named profiles for the AWS CLI
The new aws tools now support multiple profiles.
If you configure access with the tools, it automatically creates a default in ~/.aws/config.
You can then add additional profiles - more details at: Getting started with the AWS CLI
I created a simple tool, aaws, to switch between AWS accounts.
It works by setting the AWS_DEFAULT_PROFILE in your shell. Just make sure you have some entries in your ~/.aws/credentials file and it will easily switch between multiple accounts.
/tmp
$ aws s3 ls
Unable to locate credentials. You can configure credentials by running "aws configure".
/tmp
$ aaws luk3
[luk3] 🔐 /tmp
$ aws s3 ls
2013-11-05 21:40:04 luk3thomas.com
I wrote a toolkit to switch default AWS profile.
The mechanism is physically moving the profile key to the default section in config and credentials files.
The better solution today should be one of the following ways:
Use aws command option --profile.
Use environment variable AWS_PROFILE.
I don't remember why I didn't use the solution of --profile, maybe I was not realized its existence.
However the toolkit can still be useful by doing other things. I'll add a soft switch flag by using the way of AWS_PROFILE in the future.
$ xsh list aws/cfg
[functions] aws/cfg/move
[functions] aws/cfg/set
[functions] aws/cfg/activate
[functions] aws/cfg/get
[functions] aws/cfg/delete
[functions] aws/cfg/list
[functions] aws/cfg/copy
Repo: https://github.com/xsh-lib/aws
Install:
curl -s https://raw.githubusercontent.com/alexzhangs/xsh/master/boot | bash && . ~/.xshrc
xsh load xsh-lib/aws
Usage:
xsh aws/cfg/list
xsh aws/cfg/activate <profilename>
You can write shell script to set corresponding values of environment variables for each account based on user input. Doing so, you don't need to create any aliases and, furthermore, tools like ELB tools, Auto Scaling Command Line Tools will work under multiple accounts as well.
To use an IAM role, you have to make an API call to STS:AssumeRole, which will return a temporary access key ID, secret key, and security token that can then be used to sign future API calls. Formerly, to achieve secure cross-account, role-based access from the AWS Command Line Interface (CLI), an explicit call to STS:AssumeRole was required, and your long-term credentials were used. The resulting temporary credentials were captured and stored in your profile, and that profile was used for subsequent AWS API calls. This process had to be repeated when the temporary credentials expired (after 1 hour, by default).
More details: How to Use a Single IAM User to Easily Access All Your Accounts by Using the AWS CLI