I am trying to setup c++ in Eclipse IDE. I have installed the C++ Development Tools and C++ Development Tools SDK. I have read "Before you begin" in "C/C++ Development Guide". I have installed MinGW on the page it provides. It installes it to C:\MinGW which Eclipse said it could recognize. I create a new makefile C++ project with MinGW selected as my tool chain. I had to uncheck "Show toolchains only if they are supported on the platform". It doesn't work. I have spent hours on trying to make this work.
You need to tell Eclipse where to gcc.exe and g++.exe.
In your case I would expect that to be C:\MinGw\mingw32\bin or C:\MinGw\bin.
If there's no gcc.exe and g++.exe there, it would appear your MinGW setup is broken.
Note that plain MinGW is a not very well maintained or up to date. I would recommend switching to MinGW-w64, which exists for both Windows 32-bit and 64-bit. A standalone build for Windows of recent MinGW-w64 can be downloaded from https://winlibs.com/. Just extract the file (no installer needed) and point to the mingw32\bin or mingw64\bin folder to find the compiler toolchain.
Related
I tried installing CygWin64, but I cannot find any executables to build my code with in the C:\cygwin64 directory created.
I tried Win-Builds but the setup doesn't load with any mirror I give it. It tries to connect 3 times then aborts.
I tried MinGW-W64-Builds, but I cannot figure out how to install it. I can see a .sh file there, but I believe that is for Linux, so I do not know why because it says it is for Windows
Is there even a way to use 64-bit GCC on Windows? I am trying to tie it to a Code::Blocks IDE as that one only comes with the 32-bit version of MinGW.
Check out out the MinGW-w64 + GCC personal build at http://winlibs.com/.
No installation required, just unzip.
Examples on how to use are on the site, including on how to integrate with Code::Blocks IDE.
I just downloaded eclipse c/c++ IDE developer and made a C++ project. but then under problems tab, this comes up and I cannot proceed to do anything else from there.
sh-c "autoreconf-i"
Alright, I downloaded the MinGW. While installing, I clicked download original repository catalogues, accepted the agreement, and when it asked me to choose which optional components of MinGW to install, I clicked c++ compiler, at the bottom though there are like msys basic system and mingw developer toolkit, which I did not click. After I installed it, I went to computer properties then environment variables and then added ;C:\MinGW\bin to Path. I then searched for cmd and typed in gcc. It outputted, "gcc : fatal error : no input files" and below that is "compilation terminated." . I clicked eclipse and clicked C++ project. But still there was no MinGW GCC under Toolchains. All I saw was GNU autotools Toolchain.
I have installed Xcode 4.0 (XCode Toolset, System Tools and Documentation components only), but have Netbeans with the C/C++ plugin. However when I try to create a new C++ project in Netbeans it tells me that no compiler was found on my system. The recommended course of action is to install Xcode, which I have done so.
How do I get Netbeans to recognize that I already have Xcode?
Most likely, you reinstall Xcode and this time don't uncheck the option that installs the compiler, etc. under /usr/bin for command line use. What's wrong with just having a full installation of Xcode?
If that doesn't work, it may be an incompatibility due to Xcode 4 installing to /Xcode4 instead of /Developer. You can fix that with a symlink or by installing Xcode 3.
I'm trying to get eclipse to work with MinGW.
I've done the following:
Downloaded CDT for eclipse.
Installed MinGW.
Added C:\MinGW\bin to my path.
Opening a command prompt (CMD) and typing g++ or alike works fine.
I run eclipse, create a "New C++ Project", and only get the option saying "other toolchains".
There's a MILLION tutorials out there saying eclipse should identify MinGW on its own. It doesn't, and I don't know what to do. I've tried reinstalling everying in just about every order posible. Still no luck.
I've also noted some tutorials say something about creating a "Managed C++ Project". I've no such option, all I get is "C++ Project" and "C Project"
edit:
I have eclipse ganymede, windows x86_64, version 3.4.2
http://download.eclipse.org/eclipse/downloads/drops/R-3.4.2-200902111700/index.php
Running the "Eclipse IDE for C/C++ developers" fails, since there's no x64 version for windows. The x86 version requires x86 JAVA installed as well, and installing two versions of java, gave nothing but trouble in the past.
The instructions for setting up MinGW in Ganymede are located here.
The following are instructions and
links on how to install the current
version of MinGW. Note that these
links may become inaccurate over time
as new versions of MinGW components
are introduced. Please check the MinGW
File Release section for the latest
versions.
Download and run the MinGW setup program, MinGW-5.1.3.exe.
Select download and install the MinGW base tools and the g++ compiler.
You may select the Current or
Candidate version of these tools. You
may also install any of the other
available compilers as well.
Do not install the MinGW Make feature as the MSYS version of make
from step 5 is a more complete
implementation of make.
The MinGW setup program currently does not install the gdb
debugger. To install the debugger,
download the file from the following
location: gdb-6.6.tar.bz2
Extract the contents of the file gdb-6.6.tar.bz2 to the same location
where you installed MinGW.
If you want to use Makefile projects, download and run the setup
program from the following location:
MSYS-1.0.10.exe. MSYS provides an
implementation of make and related
command line tools. This is not
required for other types of projects
with the MinGW toolchain, which use
CDT's internal build tools to perform
the build.
Following this process resolved any problems I had.
I had the same exact problem with Eclipse Galileo and CDT 6.0.1. It turns out that CDT only recognized MinGW when it's located under c:\mingw. I had it in c:\msys\mingw so that was the problem. After I changed that everything worked fine.
The distinction between managed make projects and makefile project was removed in CDT 4.x, I think. Now there is only one type of project, but you can select different builders. CDT includes an internal builder which does not use makefiles and another one which does.
First, save yourself the effort of "reinstalling in every order possible". That is also known as trial-and-error, and will only make you more frustrated. Apply the normal problem-solving skills you have as a programmer.
Given that you have MinGW installed, what happens if you download "Eclipse IDE for C/C++ developers", start eclipse.exe, and try to create a C++-project with a MinGW toolchain?
EDIT: remember: the key in getting help with problems like these is to produce a minimal example which fails. Also, it would help if you provided URLs to the packages you installed (MinGW, Eclipse, etc.).
EDIT: I just installed CDT using the Ganymede update site, downloaded and installed MinGW from here, and restarted Eclipse, and everything worked fine. I know that doesn't help you, but it does prove that the toolchain detection isn't completely broken. Something is weird on your side.
You could try Wascana Desktop Developer. Its a distribution of Eclipse CDT configured specifically for developing on Windows.
I had the same problem (i.e. Eclipse not finding MinGW on the PATH) after I removed some of the unused files/folders from MinGW. It was ~600 MB and I was tasked to trim it down before adding to source control. I got it down to a workable ~200 MB. When I tried to re-create an Eclipse workspace afterwards, MinGW disappeared from available toolchains. It reappeared after I put the original MinGW install on the path.
HTH
I've been trying to use CDT with Eclipse 3.4 under Windows XP with cygwin.
What do I need to do, in order to get startet?
I used "eclipse-cpp-ganymede-SR1-win32.zip" found on the Eclipse homepage.
Edit:
The main problem is, that I cannot compile and run the code.
In the run configuration, I tried gcc.exe for the C/C++ Application:
After adding the path of make.exe to my $Path, and starting from scratch, it works perfectly.
I finally found. Thanks guys.
After downloading and unpacking "eclipse-cpp-ganymede-SR1-win32.zip", you need to install either Cygwin or MinGW.
Make sure the compiler (e.g. gcc.exe) and make.exe is on your $Path.
Start Eclipse and everything should work fine.
If you want to use Eclipse/CDT on Windows, you should consider using Wascana Desktop Developer, a CDT distro specially targeting Windows hosts.
According the the CDT Downloads page:
As a minimum, you need to install the Eclipse Platform Runtime before installing the CDT
So adding the CDT Ganymede update site to your current eclipse 3.4 configuration should be enough for you to install CDT.
After that, do you have any error message ?
For instance, there can be some eclipse.ini-related issues when using this package.
For me the package you downloaded worked from start. However I was using it with MinGW instead of Cygwin.
I am using it also for QT4 development together with QT Integrator.
I use MinGW, though I note that the documentation says you can use Cygwin. I would have a look through Max Berger's CDT guide to troubleshoot the problem.
you can install both Cygwin and MinGW in your system. gcc and make available with Mingw seems to be suitable better for native windows build. If the PATH environment is set to paths of Cygwin [and/or] MinGW Eclipse project wizard asks you select one . Either Cygwin or MinGW.
For MingW, you may need to download gdb as well, if you need to debug your application