I have an existing HANA warehouse which was built without create/update timestamps. I need to generate a number of nightly batch delta files to send to another platform. My problem is how to detect which records are new or changed so that I can capture those records within the replication process.
Is there a way to use HANA's built-in features to detect new/changed records?
SAP HANA does not provide a general change data capture interface for tables (up to current version HANA 2 SPS 02).
That means, to detect "changed records since a given point in time" some other approach has to be taken.
Depending on the information in the tables different options can be used:
if a table explicitly contains a reference to the last change time, this can be used
if a table has guaranteed update characteristics (e.g. no in-place update and monotone ID values), this could be used. E.g.
read all records where ID is larger than the last processed ID
if the table does not provide intrinsic information about change time then one could maintain a copy of the table that contains
only the records processed so far. This copy can then be used to
compare the current table and compute the difference. SAP HANA's
Smart Data Integration (SDI) flowgraphs support this approach.
In my experience, efforts to try "save time and money" on this seemingly simple problem of a delta load usually turn out to be more complex, time-consuming and expensive than using the corresponding features of ETL tools.
It is possible to create a Log table and organize columns according to your needs so that by creating a trigger on your database tables you can create a log record with timestamp values. Then you can query your log table to determine which records are inserted, updated or deleted from your source tables.
For example, following is from one of my test trigger codes
CREATE TRIGGER "A00077387"."SALARY_A_UPD" AFTER UPDATE ON "A00077387"."SALARY" REFERENCING OLD ROW MYOLDROW,
NEW ROW MYNEWROW FOR EACH ROW
begin INSERT
INTO SalaryLog ( Employee,
Salary,
Operation,
DateTime ) VALUES ( :mynewrow.Employee,
:mynewrow.Salary,
'U',
CURRENT_DATE )
;
end
;
You can create AFTER INSERT and AFTER DELETE triggers as well similar to AFTER UPDATE
You can organize your Log table so that so can track more than one table if you wish just by keeping table name, PK fields and values, operation type, timestamp values, etc.
But it is better and easier to use seperate Log tables for each table.
I have next table structure:
ID string `dynamodbav:"id,omitempty"`
Type string `dynamodbav:"type,omitempty"`
Value string `dynamodbav:"value,omitempty"`
Token string `dynamodbav:"token,omitempty"`
Status int `dynamodbav:"status,omitempty"`
ActionID string `dynamodbav:"action_id,omitempty"`
CreatedAt time.Time `dynamodbav:"created_at,omitempty"`
UpdatedAt time.Time `dynamodbav:"updated_at,omitempty"`
ValidationToken string `dynamodbav:"validation_token,omitempty"`
and I have 2 Global Secondary Indexes for Value(ValueIndex) filed and Token(TokenIndex) field. Later somewhere in the internal logic I perform the Update of this entity and immediate read of this entity by one of this indexes(ValueIndex or TokenIndex) and I see the expected problem that data is not ready(I mean not yet updated). I can't use ConsistentRead for this cases, because this is Global Secondary Index and it doesn't support this options. As a result I can't run my load tests over this logic, because data is not ready when tests go in 10-20-30 threads. So my question - is it possible to solve this problem somewhere? or should I reorganize my table and split it to 2-3 different tables and move filed like Value, Token to HASH key or SORT key?
GSIs are updated asynchronously from the table they are indexing. The updates to a GSI typically occur in well under a second. So, if you're after immediate read of a GSI after insert / update / delete, then there is the potential to get stale data. This is how GSIs work - nothing you can do about that. However, you need to be really mindful of three things:
Make sure you keep your GSI lean - that is, only project the absolute minimum attributes that you need. Less data to write will make it quicker.
Ensure that your GSIs have the correct provisioned throughput. If it doesn't, it may not be able to keep up with activity in the table and therefore you'll get long delays in the GSI being kept in sync.
If an update causes the keys in the GSI to be updated, you'll need 2 units of throughput provisioned per update. In essence, DynamoDB will delete the item then insert a new item with the keys updated. So, even though your table has 100 provisioned writes, if every single write causes an update to your GSI key, you'll need to provision 200 write units.
Once you've tuned your DynamoDB setup and you still absolutely cannot handle the brief delay in GSIs, you'll probably need to use different technology. For example, even if you decided to split your table into multiple tables, it'll have the same (if not worse) impact. You'll update one table, then try to read the data from another table and you haven't yet inserted the values into a different table.
I suspect that once you tune DynamoDB for your situation, you'll get pretty damn close you what you want.
Suppose I have a dynamo table named Person, which has 2 fields, name (string), age (int). Let's assume it has a TB worth of data and experiences a small amount of read throughput, but a ton of write throughput. Now I want to add a new field called Phone (string). What is the best way to go about moving the data from one table to another?
Note: Dynamo doesn't let you rename tables, and fields cannot be null.
Here are the options I think I have:
Dump the table to .csv, run a script (overnight probably since it's a TB worth of data) to add a default phone number to this file. (Not ideal, will also lose all new data submitted into old table, unless I bring the service offline to perform the migration (which is not an option in this case)).
Use the SCAN api call. (SCAN will read all values, then will consume significant write throughput on the new table to insert all old data into it).
How can I do perform a dynamo migration on a large table w/o
significant data loss?
you don't need to do anything. This is NoSQL, not SQL. (i.e. there is no idiomatic way to do this as you normally don't need migrations for NoSQL)
Just start writing entries with the additional key.
Records you get back that are written before will not have this key. What you normally do is have a default value you use when missing.
If you want to backfill, just go through and read the value + put the value with the additional field. You can do this in one run via a scan or again do it lazily when accessing the data.
I am going to implement a notification system, and I am trying to figure out a good way to store notifications within a database. I have a web application that uses a PostgreSQL database, but a relational database does not seem ideal for this use case; I want to support various types of notifications, each including different data, though a subset of the data is common for all types of notifications. Therefore I was thinking that a NoSQL database is probably better than trying to normalize a schema in a relational database, as this would be quite tricky.
My application is hosted in Amazon Web Services (AWS), and I have been looking a bit at DynamoDB for storing the notifications. This is because it is managed, so I do not have to deal with the operations of it. Ideally, I'd like to have used MongoDB, but I'd really prefer not having to deal with the operations of the database myself. I have been trying to come up with a way to do what I want in DynamoDB, but I have been struggling, and therefore I have a few questions.
Suppose that I want to store the following data for each notification:
An ID
User ID of the receiver of the notification
Notification type
Timestamp
Whether or not it has been read/seen
Meta data about the notification/event (no querying necessary for this)
Now, I would like to be able to query for the most recent X notifications for a given user. Also, in another query, I'd like to fetch the number of unread notifications for a particular user. I am trying to figure out a way that I can index my table to be able to do this efficiently.
I can rule out simply having a hash primary key, as I would not be doing lookups by simply a hash key. I don't know if a "hash and range primary key" would help me here, as I don't know which attribute to put as the range key. Could I have a unique notification ID as the hash key and the user ID as the range key? Would that allow me to do lookups only by the range key, i.e. without providing the hash key? Then perhaps a secondary index could help me to sort by the timestamp, if this is even possible.
I also looked at global secondary indexes, but the problem with these are that when querying the index, DynamoDB can only return attributes that are projected into the index - and since I would want all attributes to be returned, then I would effectively have to duplicate all of my data, which seems rather ridiculous.
How can I index my notifications table to support my use case? Is it even possible, or do you have any other recommendations?
Motivation Note: When using a Cloud Storage like DynamoDB we have to be aware of the Storage Model because that will directly impact
your performance, scalability, and financial costs. It is different
than working with a local database because you pay not only for the
data that you store but also the operations that you perform against
the data. Deleting a record is a WRITE operation for example, so if
you don't have an efficient plan for clean up (and your case being
Time Series Data specially needs one), you will pay the price. Your
Data Model will not show problems when dealing with small data volume
but can definitely ruin your plans when you need to scale. That being
said, decisions like creating (or not) an index, defining proper
attributes for your keys, creating table segmentation, and etc will
make the entire difference down the road. Choosing DynamoDB (or more
generically speaking, a Key-Value store) as any other architectural
decision comes with a trade-off, you need to clearly understand
certain concepts about the Storage Model to be able to use the tool
efficiently, choosing the right keys is indeed important but only the
tip of the iceberg. For example, if you overlook the fact that you are
dealing with Time Series Data, no matter what primary keys or index
you define, your provisioned throughput will not be optimized because
it is spread throughout your entire table (and its partitions) and NOT
ONLY THE DATA THAT IS FREQUENTLY ACCESSED, meaning that unused data is
directly impacting your throughput just because it is part of the same
table. This leads to cases where the
ProvisionedThroughputExceededException is thrown "unexpectedly" when
you know for sure that your provisioned throughput should be enough for your
demand, however, the TABLE PARTITION that is being unevenly accessed
has reached its limits (more details here).
The post below has more details, but I wanted to give you some motivation to read through it and understand that although you can certainly find an easier solution for now, it might mean starting from the scratch in the near future when you hit a wall (the "wall" might come as high financial costs, limitations on performance and scalability, or a combination of all).
Q: Could I have a unique notification ID as the hash key and the user ID as the range key? Would that allow me to do lookups only by the range key, i.e. without providing the hash key?
A: DynamoDB is a Key-Value storage meaning that the most efficient queries use the entire Key (Hash or Hash-Range). Using the Scan operation to actually perform a query just because you don't have your Key is definitely a sign of deficiency in your Data Model in regards to your requirements. There are a few things to consider and many options to avoid this problem (more details below).
Now before moving on, I would suggest you reading this quick post to clearly understand the difference between Hash Key and Hash+Range Key:
DynamoDB: When to use what PK type?
Your case is a typical Time Series Data scenario where your records become obsolete as the time goes by. There are two main factors you need to be careful about:
Make sure your tables have even access patterns
If you put all your notifications in a single table and the most recent ones are accessed more frequently, your provisioned throughput will not be used efficiently.
You should group the most accessed items in a single table so the provisioned throughput can be properly adjusted for the required access. Additionally, make sure you properly define a Hash Key that will allow even distribution of your data across multiple partitions.
The obsolete data is deleted with the most efficient way (effort, performance and cost wise)
The documentation suggests segmenting the data in different tables so you can delete or backup the entire table once the records become obsolete (see more details below).
Here is the section from the documentation that explains best practices related to Time Series Data:
Understand Access Patterns for Time Series Data
For each table that you create, you specify the throughput
requirements. DynamoDB allocates and reserves resources to handle your
throughput requirements with sustained low latency. When you design
your application and tables, you should consider your application's
access pattern to make the most efficient use of your table's
resources.
Suppose you design a table to track customer behavior on your site,
such as URLs that they click. You might design the table with hash and
range type primary key with Customer ID as the hash attribute and
date/time as the range attribute. In this application, customer data
grows indefinitely over time; however, the applications might show
uneven access pattern across all the items in the table where the
latest customer data is more relevant and your application might
access the latest items more frequently and as time passes these items
are less accessed, eventually the older items are rarely accessed. If
this is a known access pattern, you could take it into consideration
when designing your table schema. Instead of storing all items in a
single table, you could use multiple tables to store these items. For
example, you could create tables to store monthly or weekly data. For
the table storing data from the latest month or week, where data
access rate is high, request higher throughput and for tables storing
older data, you could dial down the throughput and save on resources.
You can save on resources by storing "hot" items in one table with
higher throughput settings, and "cold" items in another table with
lower throughput settings. You can remove old items by simply deleting
the tables. You can optionally backup these tables to other storage
options such as Amazon Simple Storage Service (Amazon S3). Deleting an
entire table is significantly more efficient than removing items
one-by-one, which essentially doubles the write throughput as you do
as many delete operations as put operations.
Source:
http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForTables.html#GuidelinesForTables.TimeSeriesDataAccessPatterns
For example, You could have your tables segmented by month:
Notifications_April, Notifications_May, etc
Q: I would like to be able to query for the most recent X notifications for a given user.
A: I would suggest using the Query operation and querying using only the Hash Key (UserId) having the Range Key to sort the notifications by the Timestamp (Date and Time).
Hash Key: UserId
Range Key: Timestamp
Note: A better solution would be the Hash Key to not only have the UserId but also another concatenated information that you could calculate before querying to make sure your Hash Key grants you even access patterns to your data. For example, you can start to have hot partitions if notifications from specific users are more accessed than others... having an additional information in the Hash Key would mitigate this risk.
Q: I'd like to fetch the number of unread notifications for a particular user.
A: Create a Global Secondary Index as a Sparse Index having the UserId as the Hash Key and Unread as the Range Key.
Example:
Index Name: Notifications_April_Unread
Hash Key: UserId
Range Key : Unuread
When you query this index by Hash Key (UserId) you would automatically have all unread notifications with no unnecessary scans through notifications which are not relevant to this case. Keep in mind that the original Primary Key from the table is automatically projected into the index, so in case you need to get more information about the notification you can always resort to those attributes to perform a GetItem or BatchGetItem on the original table.
Note: You can explore the idea of using different attributes other than the 'Unread' flag, the important thing is to keep in mind that a Sparse Index can help you on this Use Case (more details below).
Detailed Explanation:
I would have a sparse index to make sure that you can query a reduced dataset to do the count. In your case you can have an attribute "unread" to flag if the notification was read or not, and use that attribute to create the Sparse Index. When the user reads the notification you simply remove that attribute from the notification so it doesn't show up in the index anymore. Here are some guidelines from the documentation that clearly apply to your scenario:
Take Advantage of Sparse Indexes
For any item in a table, DynamoDB will only write a corresponding
index entry if the index range key
attribute value is present in the item. If the range key attribute
does not appear in every table item, the index is said to be sparse.
[...]
To track open orders, you can create an index on CustomerId (hash) and
IsOpen (range). Only those orders in the table with IsOpen defined
will appear in the index. Your application can then quickly and
efficiently find the orders that are still open by querying the index.
If you had thousands of orders, for example, but only a small number
that are open, the application can query the index and return the
OrderId of each open order. Your application will perform
significantly fewer reads than it would take to scan the entire
CustomerOrders table. [...]
Instead of writing an arbitrary value into the IsOpen attribute, you
can use a different attribute that will result in a useful sort order
in the index. To do this, you can create an OrderOpenDate attribute
and set it to the date on which the order was placed (and still delete
the attribute once the order is fulfilled), and create the OpenOrders
index with the schema CustomerId (hash) and OrderOpenDate (range).
This way when you query your index, the items will be returned in a
more useful sort order.[...]
Such a query can be very efficient, because the number of items in the
index will be significantly fewer than the number of items in the
table. In addition, the fewer table attributes you project into the
index, the fewer read capacity units you will consume from the index.
Source:
http://docs.aws.amazon.com/amazondynamodb/latest/developerguide/GuidelinesForGSI.html#GuidelinesForGSI.SparseIndexes
Find below some references to the operations that you will need to programmatically create and delete tables:
Create Table
http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_CreateTable.html
Delete Table
http://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_DeleteTable.html
I'm an active user of DynamoDB and here is what I would do... Firstly, I'm assuming that you need to access notifications individually (e.g. to mark them as read/seen), in addition to getting the latest notifications by user_id.
Table design:
NotificationsTable
id - Hash key
user_id
timestamp
...
UserNotificationsIndex (Global Secondary Index)
user_id - Hash key
timestamp - Range key
id
When you query the UserNotificationsIndex, you set the user_id of the user whose notifications you want and ScanIndexForward to false, and DynamoDB will return the notification ids for that user in reverse chronological order. You can optionally set a limit on how many results you want returned, or get a max of 1 MB.
With regards to projecting attributes, you'll either have to project the attributes you need into the index, or you can simply project the id and then write "hydrate" functionality in your code that does a look up on each ID and returns the specific fields that you need.
If you really don't like that, here is an alternate solution for you... Set your id as your timestamp. For example, I would use the # of milliseconds since a custom epoch (e.g. Jan 1, 2015). Here is an alternate table design:
NotificationsTable
user_id - Hash key
id/timestamp - Range key
Now you can query the NotificationsTable directly, setting the user_id appropriately and setting ScanIndexForward to false on the sort of the Range key. Of course, this assumes that you won't have a collision where a user gets 2 notifications in the same millisecond. This should be unlikely, but I don't know the scale of your system.
My main concern:
I have an existing table with huge data.It is having a clustered index.
My c++ process has a list of many keys with which it checks whether the key exists in the table,
and if yes, it will then check the row in the table and the new row are similar. if there is a change the new row is updated in the table.
In general there will less changes. But its huge data in the table.
S it means there will be lot of select queries but not many update queries.
What I would I like to achieve:
I just read about partitioning a table in sybase here.
I just wanted to know will this be helpful for me, as I read in the article it mentions about the insert queries only. But how can I improve my select query performance.
Could anyone please suggest what should I look for in this case?
Yes it will improve your query (read) performance so long as your query is based on the partition keys defined. Indexes can also be partitioned and it stands to reason that a smaller index will mean faster read performance.
For example if you had a query like select * from contacts where lastName = 'Smith' and you have partitioned your table index based on first letter of lastName, then the server only has to search one partition "S" to retrieve its results.
Be warned that partitioning your data can be difficult if you have a lot of different query profiles. Queries that do not include the index partition key (e.g. lastName) such as select * from staff where created > [some_date] will then have to hit every index partition in order to retrieve it's result set.
No one can tell you what you should/shouldn't do as it is very application specific and you will have to perform your own analysis. Before meddling with partitions, my advice is to ensure you have the correct indexes in place, they are being hit by your queries (i.e. no table scans), and your server is appropriately resourced (i.e got enough fast disk and RAM), and you have tuned your server caches to suit your queries.