Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 1 year ago.
Improve this question
Input:
n = 6
arr[] = {1,2,2,3,4,5}
Output: 2 2 3 4 5
Explanation: Maximum of arr[0] and arr[1]
is 2, that of arr[1] and arr[2] is 2, ...
and so on. For last two elements, maximum
is 5.
A standard array problem and I know the right solution to it too but I tried using the max() function in the C++ std library and I'm getting this
For Input:
6
1 2 2 3 4 5
your output is:
22345
This is how my function looks like
void maximumAdjacent(int sizeOfArray, int arr[]){
for (int i = 0; i<sizeOfArray-1; i++) {
cout << std::max(arr[i+1], arr[i]) << "";
}
}
On submission this answer isn't accepted and I can't seem to figure out why?
This might be a dumb answer but it looks like you are missing spaces between the numbers. I see the "" in your string and you might need a " " instead. Without the space, it is one giant number. Does that help?
Related
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 2 years ago.
Improve this question
guys I faced a problem with the recursive case of a power of a number given its base and exponent. Why is it not working properly and returns 0 everytime?
#include <bits/stdc++.h>
using namespace std;
int qn(int n,int q)
if(q==1)
return 0;
return n*qn(n,q-1);
}
int main() {
cout << qn(2,2);
}
You return 0 at the end of the recursion, and multiply with that value. Will always yield 0.
Seriously, this is very easy to figure out using only a pencil and some paper.
qn(2, 2) called
q is 2 so you execute n * qn(n, q - 1)
Replacing values you have 2 * qn(2, 1)
qn(2, 1) called
q is 1, so if (q == 1) is true
thus 0 is returned
You remplace qn(2, 1) by 0 in 2 * qn(2, 1)
You have 2 * 0
That give 0
If you use a debugger, this is even easier as you can execute the program step by step and simply note everythings it does.
By the way, as written, your code would not even compile because an opening { is missing after int qn(int n,int q).
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 2 years ago.
Improve this question
I have to find all prime numbers between two given numbers(given in ascending order i.e small, large) I made logic such that my program starts from the given least number till the given most numbers and find factors for each number in between, if factors count are 2 i.e 1 and itself(which is a condition for a prime number), hence it is printed as prime. However I am unable to print my desired output.. can't track why(P.S I am 19 years old newbie in Programming)
#include <iostream>
using namespace std;
int main(){
int start,end;
cin>>start,end;
for(int i=start+1;i<end;++i){
int count;
for(int j=1;j<=i;++j){
if(i%j==0 || i/2==0)count++;
}
if(count==2) cout<<i<<endl;
}
return 0;
}
Input: 1 10
Expected Output:
2
3
5
7
9
Output: (nothing)
Your program has several issues.
cin>>start,end; is not going to read in 2 numbers. You need cin >> start >> end;
You are not initializing count to anything, so you invoke undefined behavior when you do count++. You need to do int count = 0;
Also, when checking if n is prime, you don't need to check for divisibility by 1 or n since this is always true.
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 5 years ago.
Improve this question
Could you guys please walk and help me with this practice question?
I'm unable to figure out how the answer is 5.
int arr[12] = { 1,3,5,0,7,2,0,4,4,0,8,8 };
int count = 0;
for (int i = 0; i<11; i++) {
if (arr[i] = arr[i + 1])
count++;
else
count--;
}
cout << count << endl;
In your example you have :
if (arr[i] = arr[i + 1])
which is the =, not ==. It is assigning not checking for equality. So in the example:
if (a = 3) {
You will assign a to 3 and check if 3 is true, which it is. This leads to an easy look at why the answer is 5:
arr=> { 1,3,5,0,7,2,0,4,4,0,8,8 };
count=> 1,2,1,2,3,2,3,4,3,4,5
And if you are interested, look at the array after you have completed. It will look like this:
{3,5,0,7,2,0,4,4,0,8,8,8} // Everything has been moved down 1 (except for the final member)
See a live example of this here.
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 7 years ago.
Improve this question
Couldn't find an answer on google because I didn't know how to phrase is.
I have a regular function as below and would like to update the variable number in the first if statement. I've tried all sorts of combos but nothing works.
int main()
{
int apple, number;
cout << "Enter you number"<< endl;
cin >> apple;
if (apple == 1){
number = 2;
}
else {
number = 3;
cout << number << endl;
}
How would I change the above so I get 2 to output to the screen?
Thanks in advance!
You need to use
if (apple == 1)
instead of
if (apple = 1)
== is used for comparison. Also to note that your code will always assign the value 2 to the variable apple as in your condition you are not comparing rather you are assigning. So in your case the output will always be 2.
Closed. This question is not reproducible or was caused by typos. It is not currently accepting answers.
This question was caused by a typo or a problem that can no longer be reproduced. While similar questions may be on-topic here, this one was resolved in a way less likely to help future readers.
Closed 8 years ago.
Improve this question
In order to convert a given number to binary I wrote this code
//Binary conversion
int num,count=0;
int bi[15];
cout<<"Enter number";
cin>>num;
while(num>=1){
bi[count]=num%2;
num=num/2;
count++;
}
for(int i=0;i<=count;i++){
cout<<bi[count-i];
}
But the answer is wrong.It gives a -85993460 at the front.
If I want to convert 10 the result would be -859934601010.
Can someone please point out what's wrong with this code
When i is zero, the expression count-i is one position after the last entry of the array; this is undefined behavior, so an arbitrary number, such as -85993460, can be printed, or the program could crash.
To print your array backwards, use bi[count-1-i] instead, and end the loop upon reaching count:
for(int i=0 ; i != count ; i++) {
cout<<bi[count-1-i];
}
Your loop limits are off-by-one - the loop should be
for(int i=1;i<=count;i++){
cout<<bi[count-i];
}