I have created ec2 instance and it's part of the auto scaling group and i want to stop this instance so i can save money while this server being not used.Whenever i want to use this server that time i can start the instance.
AutoScaling Group is able to take care of this process for you.
You can change the size of the group manually, or you could schedule custom configurations to scale-up or scale-down as per your needs.
This is all supported through AWS APIs, so you can do this through AWS Console or automating the configuration.
Instances in ASG can't be stopped. If you want to stop one instance you have to detach it from ASG. When you are ready to start it, you can attach it again.
But really, you should reconsider how you use ASG. Detaching and re-attaching instances from ASG is meant for mostly troubleshooting purposes, not something you do regulatory just to save cost. Its better to set minimum and desired capacity of ASG to 0 if you don't want any instance in it.
Related
I am running a flask python program on EC2 which is under Load Balancer and autoscaling. In a scenario where is load increases on one Ec2 it creates another and if newly scaled Ec2 has been idle or not utilized it scales in or terminates it. The problem here is if a single user is accessing newly scaled instance which hardly takes any CPU utilization how autoscaling group will realize that it idle and if it doesn't it will terminate it leaving downtime for that user.
I have two scenarios in mind that it checks for a particular program for a amount of time in EC2 if it is running then don't, otherwise terminate it.
I see Step scaling policy but there option is only for CPU utilization that is hardly consumed if there is a single user, not even 0.1 %.
Can someone please tell me whats the best option for me and if these two options are possible then how to do it? I have been trying to ask developers since many days but could not get reliable answers in my case.
Amazon EC2 Auto-scaling does not know which of your instances are 'in use'.
Also, the decision to terminate an instance is typically made on a metric across all instances (eg CPU Utilization), rather than a metric on a specific instance.
When Auto Scaling decides to remove an instance from the Auto Scaling group, it picks an instance as follows:
It picks an Availability Zone with the most instances (to keep them balanced)
It then selects an instance based on the Termination Policy
See also: Control which Auto Scaling instances terminate during scale in - Amazon EC2 Auto Scaling
When using a Load Balancer with Auto Scaling, traffic going to the instance that will be terminated is 'drained', allowing a chance for the instance to complete existing requests.
You can further prevent an instance from terminating while it is still "in use"by implementing Amazon EC2 Auto Scaling lifecycle hooks that allow your own code to delay the Termination.
Or, if all of this is unsatisfactory, you can disable the automatic selection of an instance to terminate and instance have your own code call TerminateInstanceInAutoScalingGroup - Amazon EC2 Auto Scaling to terminate a specific instance of your choosing.
For an overview of Auto Scaling, I recommend this video from the AWS Reinvent conference: AWS re:Invent 2019: Capacity management made easy with Amazon EC2 Auto Scaling (CMP326-R1) - YouTube
I have foreseen a problem that could happen with my application but I am unsure if it is possible to solve, and perhaps the architecture needs to be redesigned.
I am using an AutoScalingGroup (ASG) on AWS to create EC2 instances that host game servers that players can join. At the moment, the ASG is scaled manually via a matchmaking API which changes the desired capacity based on its needs. The problem occurs when a game server is finished.
When a game finishes, it signals to the matchmaker that it is finished and needs terminating, and the matchmaker will then scale down the ASG accordingly, however, it doesn't seem to know exactly which instance to remove, and it won't necessarily be the one that needs terminating.
I can terminate the instance, but then as the ASG desired capacity is never changed when the instance is terminated, another server is created.
Is there a way I can scale down the ASG, as well as specifying which servers to remove from the group?
In a nutshell, the default termination policy during scale in is designed to remove instances that use the oldest launch configuration.
Currently, Amazon EC2 Auto Scaling supports the following termination policie:
OldestInstance Terminate the oldest instance in the group. This option is useful when you're upgrading the instances in the Auto Scaling group to a new EC2 instance type. You can gradually replace instances of the old type with instances of the new type.
NewestInstance Terminate the newest instance in the group. This policy is useful when you're testing a new launch configuration but don't want to keep it in production.
OldestLaunchConfiguration Terminate instances that have the oldest launch configuration. This policy is useful when you're updating a group and phasing out the instances from a previous configuration.
ClosestToNextInstanceHour Terminate instances that are closest to the next billing hour. This policy helps you maximize the use of your instances and manage your Amazon EC2 usage costs.
Default Terminate instances according to the default termination policy. This policy is useful when you have more than one scaling policy for the group.
Instance protection
One of the possible solutions could be to use Instance protection. The auto-scaling provides an instance protection to control whether instance can be terminated when scaling-in.
Therefore, enable the instance protection for ASG to protect instances from scaling-in by default. Once you are done with you server, decrease a value of desired number of instances, remove instance protection from particular instance (either using CLI or SDK; note that this protection remains enabled for the rest of instances) and auto-scaling will terminate that exact instance.
For more information about instance protection, see Instance Protection
The oldest server is removed. If you want to scale down a specific server, you will have to kill that server before changing desired capacity.
I configured for my AWS account the new AWS instance scheduler https://aws.amazon.com/answers/infrastructure-management/instance-scheduler/
The problem seems that, tagging ec2-instances through a scaling group the ec2-instances are correctly stopped, but since my scaling group has Min number set to 2 AWS scaling group restarts them anyway.
I would not like to set Min number to 0, just because is useful during application redeploy.
How to make the 2 services work fine?
When you stop your EC2 instances that are controlled by Auto Scaling, then Auto Scaling will see them as "unhealthy" and it will proceed to terminate and replace them.
You have 2 options.
Option 1: Pause Auto Scaling processing while your EC2 instances are stopped. By doing this, Auto Scaling won't care that your EC2 instances are stopped and won't terminate them. Just remember to resume processing after you restart your EC2 instances.
However, AWS Instance Scheduler will not manage this for you, so you'll need to find another way to schedule your EC2 instances to stop & restart.
Option 2: Scale your Auto Scaling group to 0 and back to 2. This will result in terminating your EC2 instances (when you don't need them) and re-creating them (when you want them). This will only work if your EC2 instances are ephemeral.
Again, AWS Instance Scheduler will not manage this for you. Auto Scaling scheduled actions may be able to help you with this.
Another option is to use asg standby feature before and after the aws instance scheduler. This will also let you work on the same Ami before the shutdown.
So high level solution is below:
Define ec2 instance schedule using aws instance scheduler
Define lambda that fetch the shutdown schedule and put the ec2 in standby mode before the planned shutdown.
Define lambda that fetch the startup schedule and put the ec2 instance out of standby after the ec2 planned restart.
You can create new Launch Configuration (updating AMI or whatever) and attach this with an existing Autoscaling Group. Per AWS Docs: After you change the launch configuration for an Auto Scaling group, any new instances are launched using the new configuration options, but existing instances are not affected.
How do you force this? Meaning relaunch all new instances now (with the new AMI). Do I have to delete the existing Autoscaling Group and create a new Autoscaling Group (with new Config)? Or I simple delete existing instances (one by one manually) and then ASG relaunch with new AMI. Any best practices/gotchas?
CloudFormation has the RollingUpdate flag (not sure of this outside of CF)
Thanks
AWS has some OOTB solutions for this, CloudFormation (like you say), Elastic Beanstalk (built on top of CF), and CodeDeploy blue-green deployments (I've not tried this).
Personally for our SQS polling ASG, we do a "cold deploy" i.e. only "deploy" when there are no messages to process (and hence, due a scaling policy, no instances). It's been really effective.
A deploy can be done safely whilst there are messages, provided that you set scale-in-protection on the instance during message processing (and remove it and wait briefly before polling):
set desired-capacity to 0
wait a bit (for there to be no instances running)
set desired-capacity back to N.
Note: you can do this all in the console.
You can code a solution yourself that does this... but I probably wouldn't.
Be careful:
simple delete existing instances (one by one manually)
Whether you can do this, or depends on whether the instances are still handling requests/processing (usually you can't simply terminate an instance without dropping service).
I recommend Elastic Beanstalk which gives a rolling update feature for free and is very easy to get started. I've not tried the CodeDeploy blue-green but it looks interesting. If you want more advanced behavior (or are already using it) look into Cloud Formation... do not code your own solution for rolling deployments: just use CloudFormation.
if your issue is with "in flight" requests simply enable connection draining or increase de-registration delay of the ELB or "target groups" attached with the ASG. You can set a value up to one hour.
When you enable connection draining, you can specify a maximum time for the load balancer to keep connections alive before reporting the instance as de-registered. The maximum timeout value can be set between 1 and 3,600 seconds (the default is 300 seconds). When the maximum time limit is reached, the load balancer forcibly closes connections to the de-registering instance.
Then you can detached old instances.
If you detach an instance from an Auto Scaling group that has an attached load balancer, the instance is deregistered from the load balancer. If you detach an instance from an Auto Scaling group that has an attached target group, the instance is deregistered from the target group. If connection draining is enabled for your load balancer, Auto Scaling waits for in-flight requests to complete.
If you don't want to do any manual scaling I guess the best approach is to changing the termination policy to OldestInstance and leave the ASG as it is. When the scale-in activity happens ASG will automatically terminate the old instances.(in your case old launch config instances)
OldestInstance. Auto Scaling terminates the oldest instance in the group. This option is useful when you're upgrading the instances in the Auto Scaling group to a new EC2 instance type. You can gradually replace instances of the old type with instances of the new type.
I am looking at using AWS auto-scaling to scale my infrastructure up and down based on various performance metrics (CPU, etc.). I understand how to set this up; however, I don't like that instances are terminated rather than stopped when it is scaled down. This means that when I scale back up, I have to start from scratch with a new instance and re-install my software, etc. I'd rather just start/stop my instances as needed rather than create/terminate. Is there a way to do this?
No, it is not possible to Stop an instance under Auto Scaling. When a Scaling Policy triggers the removal of an instance, Auto Scaling will always Terminate the instance.
However, here's some ideas to cope with the concept of Termination...
Option 1: Use pre-configured AMIs
You can configure an Amazon EC2 instance with your desired software, data and settings. Then, select the EC2 instance in the Management Console and choose the Create Image action. This will create a new Amazon Machine Image (AMI). You can then configure Auto Scaling to use this AMI when launching a new instance. Each new instance will contain exactly the same disk contents.
It's worth mentioning that EBS starts up very quickly from an AMI. Instead of copying the whole AMI to the boot disk, it copies it across on "first access". This means the new instance can start-up immediately rather than waiting for the whole disk to be copied.
Option 2: Use a startup (User Data) script
Each Amazon EC2 instance has a User Data field, which is accessible from the instance. A script can be passed through the User Data field, which is then executed when the instance starts. The script could be used to install software, download data and configure the instance.
The script could do something very simple, like download a configuration script from a source code repository, then execute the script. This means that machine configuration can be centrally managed and version-controlled. Want to update your app? Just launch a new instance with the updated script and throw away the old instance (which is much easier than "updating" an app).
Option 3: Add/Remove instances to an Auto Scaling group
Rather than using Scaling Policies to Launch/Terminate instances for an Auto Scaling group, it is possible to attach/detach specific instances. Thus, you could 'simulate' auto scaling:
When you want to scale-down, detach an instance from the Auto Scaling group, then stop it.
When you want to add an instance, start the instance then attach it to the Auto Scaling group.
This would require your own code, but it is very simple (basically two API calls). You would be responsible for keeping track of which instance to attach/detach.
You can suspend scaling processes, see documentation here:
https://docs.aws.amazon.com/autoscaling/ec2/userguide/as-suspend-resume-processes.html#as-suspend-resume
Add that instance to Scale in protection and then stop the instance then it will not delete your instance as it's having the scale in protection.
Actually you have three official AWS options to reboot or even stop an instance which belongs to an Auto Scaling Group:
Put the instance into the Standby state
Detach the instance from the group
Suspend the health check process
Ref.: https://aws.amazon.com/premiumsupport/knowledge-center/reboot-autoscaling-group-instance/
As of April 2021:
Option 4: Use Warm Pools and an Instance Reuse Policy
By default, Amazon EC2 Auto Scaling terminates your instances when your Auto Scaling group scales in. Then, it launches new instances into the warm pool to replace the instances that were terminated.
If you want to return instances to the warm pool instead, you can specify an instance reuse policy. This lets you reuse instances that are already configured to serve application traffic.
This mostly automates option 3 from John's answer.
Release announcement: https://aws.amazon.com/blogs/compute/scaling-your-applications-faster-with-ec2-auto-scaling-warm-pools/
Documentation: https://docs.aws.amazon.com/autoscaling/ec2/userguide/ec2-auto-scaling-warm-pools.html
This is to expand a little on #mwalling's answer, because that is the right direction, but needs a little extra work to prevent instance termination.
There is now a way to stop or hibernate scaled in instances!
By default AWS Autoscaling scale in policy is to terminate an instance. Even if you have a warm pool configured. Autoscaling will create a fresh instance to put into the warm pool. Presumably to make sure you start with a fresh machine every time. However, with a instance reuse policy you can make AWS Autoscaling either stop or hibernate a running instance and store that instance in the warm pool.
Advantages include:
Local caches stay populated (use hibernate for in memory cache).
Burstable EC2 instances (those types with T*) keep built up burst credits instead of the newly created instance that have limited or no credits.
Practical example:
We use a burstable EC2 instance for CI/CD work that we scale to 0 instances outside working hours. With a reuse policy our local image repository stays populated with the most important Docker images. Also we keep the built up credit from the previous day and that speeds up automatic jobs we run first thing every morning.
How to implement:
There's currently no way of doing this completely via the management console. So you will need to use AWS CLI or SDK.
First create a warm pool as described in the AWS Documentation
Then execute this command to add a reuse policy:
aws autoscaling put-warm-pool --auto-scaling-group-name <Name-of-autoscaling-group> --instance-reuse-policy ReuseOnScaleIn=true
Reference docs for the command: AWS CLI Autoscaling put-warm-pool documentation
Flow diagram of possible life cycles of EC2 instances:
Image from AWS Documentation: Lifecycle state transitions for instances in a warm pool