Many of links I have tried have said to follow the same steps,
install MSYS2
install GCC
run ./configure
run make
run make install
run make check
in the directory of the GMP files. I have tried this and it has never worked.
The only thing that has worked for me was installing MSYS (not MSYS2) and selecting a MinGW compiler from CodeBlocks to then run the above instructions. It has worked then for 32bit programs, however I don't know how to get it working for 64bit programs.
On my latest attempt, I tried running ./configure "CFLAGS=-m64" "CXXFLAGS=-m64" "LDFLAGS=-m64" && make and then the remaining steps. This still ended me up in the same place as running just ./configure.
I thought if the above didn't work for 64bit, then surely it would work for 64bit (the ./configure solution), however it doesn't.
On 32bit, I get these errors:
undefined reference to __gmpz_init
... more of the above but for different gmp functions
and on 64bit I get these errors (this is what I am trying to compile for):
undefined reference to `__getreent`
and this ^ repeats a lot of times.
I can't find any guides online about installing GMP-64bit, rather 32bit and that uses MSYS, which is what I had working initially, however that is only for 32bit and an outdated compiler.
How can I install 64bit GMP to use in a CodeBlocks Project using a MinGW 64bit compiler?
Related
I have been using the minGW64 compiler with Visual studio code on windows for some time. However, there are certain limitations to it when it comes to certain libraries. The absence of a make tool and the inability to execute a config script while compiling a c++ program being the main ones. I came to know of MSYS, a tool provides a UNIX environment that allows us to do certain things that are forbidden by the windows terminal. I installed it but I saw that I need to install mingw64 again, from within the terminal to use it with MSYS2.
My question is, is there no way I can use my earlier mingw copy with this installation of MSYS2? Is there some difference between the mingw64 that comes with MSYS2 and the standard installation?
I tried installing CygWin64, but I cannot find any executables to build my code with in the C:\cygwin64 directory created.
I tried Win-Builds but the setup doesn't load with any mirror I give it. It tries to connect 3 times then aborts.
I tried MinGW-W64-Builds, but I cannot figure out how to install it. I can see a .sh file there, but I believe that is for Linux, so I do not know why because it says it is for Windows
Is there even a way to use 64-bit GCC on Windows? I am trying to tie it to a Code::Blocks IDE as that one only comes with the 32-bit version of MinGW.
Check out out the MinGW-w64 + GCC personal build at http://winlibs.com/.
No installation required, just unzip.
Examples on how to use are on the site, including on how to integrate with Code::Blocks IDE.
i am new to linux and I have the following question:
I am trying to install MINGW in Ubuntu.
I ran the command:
sudo apt-get install mingw-w64
It was installed, and if i put the command gcc it runs ok. The problem is g++ command does not work. I guess it is because i don't have the c++ compiler (as I read in similar questions in stackoverflow).
I read too that you can use the next command:
mingw-get install g++
but i don't have the executable program for this command.
My question is, how can I install that executable? or is there another way to update my mingw so I can use the g++ compiler?
Hope I have explained myself correctly. Thank you for any help I receive.
mingw-get is a windows specific package manager, it is not needed when you use a native linux package manager such as APT.
Installing package mingw-w64 depends on package g++-mingw-w64, which depends on g++-mingw-w64-i686 and g++-mingw-w64-x86-64.
These packages install the mingw cross compilers as
/usr/bin/x86_64-w64-mingw32-g++-posix
/usr/bin/x86_64-w64-mingw32-g++-win32
/usr/bin/i686-w64-mingw32-g++-posix
/usr/bin/i686-w64-mingw32-g++-win32
Older versions of mingw cross compiler shipped /usr/bin/i586-mingw32msvc-c++, which is replaced by i686-w64-mingw32-c++-win32
You can usually use this toolchain in a project by running ./configure CXX=i686-w64-mingw32-c++-win32 or make CXX=i686-w64-mingw32-c++-win32
Note: the above description is correct for the most recent toolchain in Debian unstable. It may need some minor tweaking for older systems.
I've downloaded MinGW with mingw-get-inst, and now I've noticed that it cannot compile for x64.
So is there any 32-bit binary version of the MinGW compiler that can both compile for 32-bit Windows and also for 64-bit Windows?
I don't want a 64-bit version that can generate 32-bit code, since I want the compiler to also run on 32-bit Windows, and I'm only looking for precompiled binaries here, not source files, since I've spent countless hours compiling GCC and failing, and I've given up for a while. :(
AFAIK mingw targets either 32 bit windows or 64 bit windows, but not both, so you would need two installs. And the latter is still considered beta.
For you what you want is either mingw-w64-bin_i686-mingw or mingw-w64-bin_i686-cygwin if you want to compile for windows 64. For win32, just use what you get with mingw-get-inst.
See http://sourceforge.net/apps/trac/mingw-w64/wiki/download%20filename%20structure for an explanation of file names.
I realize this is an old question. However it's linked to the many times the question has been repeated.
I have found, after lots of research that, by now, years later, both compilers are commonly installed by default when installing mingw from your repository (i.e. synaptic).
You can check and verify by running Linux's locate command:
$ locate -r "mingw32.*[cg]++$"
On my Ubuntu (13.10) install I have by default the following compilers to choose from... found by issuing the locate command.
/usr/bin/amd64-mingw32msvc-c++
/usr/bin/amd64-mingw32msvc-g++
/usr/bin/i586-mingw32msvc-c++
/usr/bin/i586-mingw32msvc-g++
/usr/bin/i686-w64-mingw32-c++
/usr/bin/i686-w64-mingw32-g++
/usr/bin/x86_64-w64-mingw32-c++
/usr/bin/x86_64-w64-mingw32-g++
Finally, the least you'd have to do on many systems is run:
$ sudo apt-get install gcc-mingw32
I hope the many links to this page can spare a lot of programmers some search time.
for you situation, you can download multilib (include lib32 and lib64) version for Mingw64:
Multilib Toolchains(Targetting Win32 and Win64)
By default it is compiled for 64bit.You can add -m32 flag to compile for 32bit program.
But sadly,no gdb provided,you ought to add it manually.
Because according to mingw-64's todo list, gcc multilib version is done,but gdb
multilib version is still in progress,you could use it maybe in the future.
Support of multilib build in configure and in gcc. Parts are already present in gcc's 4.5 version by using target triplet -w64-mingw32.
gdb -- Native support is present, but some features like multi-arch support (debugging 32-bit and 64-bit by one gdb) are still missing features.
mingw-64-todo-list
I am trying to compile a 32-bit version (MinGW) of a program I wrote using zlib. Until now, I've never has to compile for 32-bit so the version of zlib I compiled from source (libz.a) is 64-bit. I tried to rerun the makefile in the zlib-1.2.5 directory but it only compiles a 64bit version of libz.a.
I can't seem to find an option to build 32-bit.
Does anyone know how to do this?
Thanks!
Jeffrey Kevin Pry
Checking the configure file, you can see some env.
On 64bit debian, following command line will build the 32bit version of libz
CFLAGS=-m32 ./configure
It turns out I had to get the 32bit version of MinGW and compile it with that. I was using MinGW64.
Using CFLAGS=-32 won't do it for me, configure script still shouts out telling me to use win32/Makefile.gcc instead all the time.
The recent version of zlib is 1.2.11, so it should be minimal gap of difference up until today. Without any context on system, the following might be useful for other users facing this similar problem these days.
I cross compile on Linux (Ubuntu 18.04), and target 32-bit version of zlib to be produced. What I did is as follows.
./configure (this is just to let us have required file to building process, we will be using different Makefile though)
Modify win32/Makefile.gcc for its PREFIX=i686-w64-mingw32- (for 64-bit you change it to PREFIX=x86_64-w64-mingw32-.
make -fwin32/Makefile.gcc
Install to your desire location via make install -fwin32/Makefile.gcc SHARED_MODE=1 INCLUDE_PATH=/tmp/zlib-win32/include LIBRARY_PATH=/tmp/zlib-win32/lib BINARY_PATH=/tmp/zlib-win32/bin. Notice that you need to specify INCLUDE_PATH, LIBRARY_PATH, and BINARY_PATH. BINARY_PATH will contains result .dll file.