I am using estpost and esttab commands to create frequency distribution tables. However, the labels of my categorical variables are too long and Stata crops the variable labels.
sysuse auto, clear
label define longlabel 0 "domestic car domestic car domestic car domestic car domestic car" ///
1 "foreign car foreign car foreign car foreign car foreign car"
label values foreign longlabel
estpost tabulate foreign
esttab ., cells("b") eqlabels(`e(eqlabels)') varlabels(`e(labels)') label
---------------------------------
(1)
Car type
b
---------------------------------
domestic car domes~t 52
foreign car foreig~ 22
Total 74
---------------------------------
Observations 74
---------------------------------
Is there a way to force Stata to save the full labels?
You can use option noabbrev to prevent truncation, or varwidth(#) to set the width of the first column.
Related
I am constructing a table of means and p-values from ttest. How can I get all of this in the same esttab table? Here is a MWE:
Get the sample, save it as a temporary file, create a local with the variables we will consider, create a local that is the length of the first local:
sysuse auto2, clear
*create two groups: 0 and 1
gen group = _n<37
tempfile a
save `a'
local vars "price headroom trunk weight"
local vars_n: word count `vars'
ssc install estout
eststo clear
Calculate the means of group 0 (column 1) and group 2 (column 2):
*group 0 means
use `a', clear
keep if group==0
eststo: estpost sum `vars'
*group 1 means
use `a', clear
keep if group==1
eststo: estpost sum `vars'
Conduct t-tests for each variable (is there an easier way to do this?):
*t-test
*create blank matrix
matrix pval = J(`vars_n',1,.)
use `a', clear
forvalues i=1/`vars_n' {
local var `: word `i' of `vars''
ttest `var', by(group)
*add the two-sided p-value to matrix
matrix pval[`i',1]=r(p)
}
This previous block of code saves the p-values (column 3) into a matrix.
Use esttab to output the results:
esttab, cells(mean(fmt(2))) collabels(none) nodepvars nonumber replace label
esttab matrix(pval, fmt(2 0))
My issue is that I need to have the p-values in the same esttab as the means, but I currently have them in a matrix. How can I use something like eststo: estpost to get them so that I can use esttab (as opposed to esttab matrix)? Or is there a better way to do all of this? My goal is to run esttab, cells(mean(fmt(2))) collabels(none) nodepvars nonumber replace label and have it create a table with the first two columns being the means and the third column being the p-values.
All the information you need is in estpost ttest, so an easy solution would be this:
sysuse auto2, clear
gen group = _n<37
local vars price headroom trunk weight
estpost ttest `vars', by(group)
esttab ., cells("mu_1 mu_2 p") nonumber label
-----------------------------------------------------------
mu_1 mu_2 p
-----------------------------------------------------------
Price 5847.526 6500.639 .3445597
Headroom (in.) 2.828947 3.166667 .0861206
Trunk space (.. ft.) 12.39474 15.19444 .0041618
Weight (lbs.) 2654.474 3404.722 .0000115
-----------------------------------------------------------
Observations 74
-----------------------------------------------------------
I'm trying to create a table showing the difference in means of two groups but I'm struggling to get exactly the right columns. I'm specifically trying to recreate a table that includes a column indicating N. I'm really confused how I would go about doing this. Here's the code for the bulk of the kind of table I'm talking about:
sysuse auto, clear
eststo all: quietly estpost summarize ///
price mpg weight headroom trunk
eststo domestic: quietly estpost summarize ///
price mpg weight headroom trunk if foreign == 0
eststo foreign: quietly estpost summarize ///
price mpg weight headroom trunk if foreign == 1
eststo diff: quietly estpost ttest ///
price mpg weight headroom trunk, by(foreign) unequal
esttab all domestic foreign diff, ///
cells("mean(pattern(1 1 1 0) fmt(2)) b(star pattern(0 0 0 1) fmt(2))" "sd(pattern(1 1 1 0) par fmt(2)) t(pattern(0 0 0 1) par fmt(2))") ///
label
In this scenario, I want a column N that just lists 74 in each row. In this shortened example, it doesn't make much sense but I'm using multiple data sources with the same variables and I want to stack the difference in means tables together.
You can reference the number of observations in each subsample (in this case by(foreign)) using N_1 and N_2 as follows:
sysuse auto, clear
estpost ttest price mpg weight headroom trunk, by(foreign)
esttab . , ///
cell(( N_2(fmt(%12.0fc)) mu_2(fmt(%12.3fc)) ///
N_1(fmt(%12.0fc)) mu_1(fmt(%12.3fc)) ///
b(fmt(%12.3fc)) t(fmt(%12.2fc)) )) ///
noobs label collabels(Count Mean Count Mean Diff T-Stat )
This question already has an answer here:
How can I add a fixed effect model label to an estout table?
(1 answer)
Closed 4 years ago.
Here are the codes. I would like Year fixed effects to appear in both columns. However, it shows in the second column only. How to make this happen? Thanks.
sysuse auto, clear
eststo: quietly regress price weight mpg
eststo: quietly regress price weight mpg foreign
estadd local year_fe Yes
esttab, cells(b(fmt(a3)) t(fmt(2) par)) stats(year_fe r2 N, fmt(%-#s 3 0)
labels("Year FE"))
--------------------------------------
est1 est2
b/t b/t
--------------------------------------
weight 1.747 3.465
(2.72) (5.49)
mpg -49.51 21.85
(-0.57) (0.29)
foreign 3673.1
(5.37)
_cons 1946.1 -5853.7
(0.54) (-1.73)
--------------------------------------
Year FE Yes
r2 0.293 0.500
N 74 74
--------------------------------------
Just found out that I have to "estadd local year_fe Yes" after each regression.
I would like to make a summary statistics table using esttab from the estout package on SSC. I can make the table just fine, but I would like to add a column that counts the number of non-missing observations for each variable. That is, some variables may not be complete and I would like this to be clear to the reader.
In the example below I removed the first five observations for price, so I would like a 69 in that row. But my code doesn't include row-specific observation counts, only the total number of observations in the footer.
sysuse auto, clear
estpost summarize, detail
replace price = . in 1/5
local screen ///
cells("N mean sd min p50 max") ///
nonumber label
esttab, `screen'
This yields an empty N column, which I would prefer to have at 69 , followed by all 74s.
Is this it:
clear all
set more off
*----- exmple data -----
sysuse auto, clear
keep price mpg rep78 headroom
replace price = . in 1/5
*----- what you want -----
estpost summarize, detail
local screen cells("count mean sd") nonumber label noobs
esttab, `screen'
?
It just uses count. esttab is a wrapper for estout, and the help for the latter documents that it will take "results from e(myel)", which you have from estpost summarize, detail.
An alternative is:
tabstat _all, statistics(count mean sd) columns(statistics)
Yet another one, only that it allows variable labels to be displayed:
fsum _all, stat(n mean sd) uselabel
fsum is from SSC.
I would like to use esttab (ssc install estout) to generate summary statistics by group with columns for the mean difference and significance. It is easy enough to generate these as two separate tables with estpost, summarize, and ttest, and combine manually, but I would like to automate the whole process.
The following code generates the two components of the desired table.
sysuse auto, clear
* summary statistics by group
eststo clear
by foreign: eststo: quietly estpost summarize ///
price mpg weight headroom trunk
esttab, cells("mean sd") label nodepvar
* difference in means
eststo: estpost ttest price mpg weight headroom trunk, ///
by(foreign) unequal
esttab ., wide label
And I can print the two tables and cut-an-paste into one table.
* can generate similar tables and append horizontally
esttab, cells("mean sd") label
esttab, wide label
* manual, cut-and-paste solution
-------------------------------------------------------------------------------------------------------
(1) (2) (3)
mean sd mean sd
-------------------------------------------------------------------------------------------------------
Price 6072.423 3097.104 6384.682 2621.915 -312.3 (-0.44)
Mileage (mpg) 19.82692 4.743297 24.77273 6.611187 -4.946** (-3.18)
Weight (lbs.) 3317.115 695.3637 2315.909 433.0035 1001.2*** (7.50)
Headroom (in.) 3.153846 .9157578 2.613636 .4862837 0.540** (3.30)
Trunk space (.. ft.) 14.75 4.306288 11.40909 3.216906 3.341*** (3.67)
-------------------------------------------------------------------------------------------------------
Observations 52 22 74
-------------------------------------------------------------------------------------------------------
t statistics in parentheses
* p<0.05, ** p<0.01, *** p<0.001
It seems that I should be able to get the desired table with one esttab call and without cutting-and-pasting, but I can't figure it out. Is there a way to generate the desired table without manually cutting-and-pasting?
I would prefer to output a LaTeX table, but anything that eliminates the cutting-and-pasting is a big step, even passing through a delimited text file.
If you still want to use esttab, you can play around using cells and pattern. The table in the original post can be replicated with the following code:
sysuse auto, clear
eststo domestic: quietly estpost summarize ///
price mpg weight headroom trunk if foreign == 0
eststo foreign: quietly estpost summarize ///
price mpg weight headroom trunk if foreign == 1
eststo diff: quietly estpost ttest ///
price mpg weight headroom trunk, by(foreign) unequal
esttab domestic foreign diff, ///
cells("mean(pattern(1 1 0) fmt(2)) sd(pattern(1 1 0)) b(star pattern(0 0 1) fmt(2)) t(pattern(0 0 1) par fmt(2))") ///
label
which yields
-----------------------------------------------------------------------------------------------------
(1) (2) (3)
mean sd mean sd b t
-----------------------------------------------------------------------------------------------------
Price 6072.42 3097.10 6384.68 2621.92 -312.26 (-0.44)
Mileage (mpg) 19.83 4.74 24.77 6.61 -4.95** (-3.18)
Weight (lbs.) 3317.12 695.36 2315.91 433.00 1001.21*** (7.50)
Headroom (in.) 3.15 0.92 2.61 0.49 0.54** (3.30)
Trunk space (.. ft.) 14.75 4.31 11.41 3.22 3.34*** (3.67)
-----------------------------------------------------------------------------------------------------
Observations 52 22 74
-----------------------------------------------------------------------------------------------------
I don't think there's a way to do this with esttab (estout package from ssc), but I have a solution with listtab (also ssc) and postfile. The table here is a little different than the one I propose above, but the approach is general enough that you can modify it to fit your needs.
This solution also use LaTeX's booktabs package.
/* data and variables */
sysuse auto, clear
local vars price mpg weight headroom trunk
/* means */
tempname postMeans
tempfile means
postfile `postMeans' ///
str100 varname domesticMeans foreignMeans pMeans using "`means'", replace
foreach v of local vars {
local name: variable label `v'
ttest `v', by(foreign)
post `postMeans' ("`name'") (r(mu_1)) (r(mu_2)) (r(p))
}
postclose `postMeans'
/* medians */
tempname postMedians
tempfile medians
postfile `postMedians' ///
domesticMedians foreignMedians pMedians using `medians', replace
foreach v of local vars {
summarize `v' if !foreign, detail
local med1 = r(p50)
summarize `v' if foreign, detail
local med2 = r(p50)
ranksum `v', by(foreign)
local pval = 2 * (1 - normal(abs(r(z))))
post `postMedians' (`med1') (`med2') (`pval')
}
postclose `postMedians'
/* combine */
use `means'
merge 1:1 _n using `medians', nogenerate
format *Means *Medians %9.3gc
list
/* make latex table */
/* requires LaTeX package `booktabs` */
listtab * using "Table.tex", ///
rstyle(tabular) replace ///
head("\begin{tabular}{lcccccc}" ///
"\toprule" ///
"& \multicolumn{3}{c}{Means} & \multicolumn{3}{c}{Medians} \\" ///
"\cmidrule(lr){2-4} \cmidrule(lr){5-7}" ///
"& Domestic & Foreign & \emph{p} & Domestic & Foreign & \emph{p}\\" ///
"\midrule") ///
foot("\bottomrule" "\end{tabular}")
This yields the following.
The answer chosen is nice but a bit redudant. You can achieve the same result with only estpost ttest.
sysuse auto, clear
estpost ttest price mpg weight headroom trunk, by(foreign)
esttab, cells("mu_1 mu_2 b(star)"
The output looks like this:
mu_1 mu_2 b
c_score 43.33858 42.034 1.30458***
nc_a4_17 4.007524 3.924623 .0829008*