I am trying to install RedisGraph on my Macbook Pro. I have clone the repo and in the project directory I ran the make command but I get the following output.
make[2]: *** No targets specified and no makefile found. Stop.
make[1]: *** [../deps/rax/rax.o] Error 2
make: *** [all] Error 2
There's a Makefile in the repo though. If I run make Makefile, I still get
make: Nothing to be done for `Makefile'.
My gcc version:
Configured with: --prefix=/Library/Developer/CommandLineTools/usr --with-gxx-include-dir=/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk/usr/include/c++/4.2.1
Apple clang version 12.0.0 (clang-1200.0.32.27)
Target: x86_64-apple-darwin20.1.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
I am following the steps on this doc. Any help would be greatly appreciated! Not sure if it is related to OS X version of Clang (if I have to change it to a different version).
After cloning the repo, you must clone its submodules with git submodule update --init --recursive . Then make will execute properly.
Related
I am trying to install a c++ compiler on a IBM Power7 with Fedora 26.
In /usr/bin it is installed gcc [(GCC) 7.2.1 20170915 (Red Hat 7.2.1-2)] but it has not the c++ compiler (I tried gcc -lstdc++ but the result is: `
/usr/bin/ld: cannot find -lstdc++
I do not have sudo rights so I have to install everything from source.
I was able to install:
Zlib
Perl
Curl
Git
GNU M4
GMP
MPFR
MPC
EXPAT
APR and APR-UTIL
ISL
but when I try to install locally gcc, after a successfull configure, when I try make I got this error:
configure: error: in `/home/aantonietti/gcc/host-powerpc64-unknown-linux-gnu/gcc':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
make[2]: *** [Makefile:4333: configure-stage1-gcc] Error 1
make[2]: Leaving directory '/home/aantonietti/gcc'
make[1]: *** [Makefile:23745: stage1-bubble] Error 2
make[1]: Leaving directory '/home/aantonietti/gcc'
make: *** [Makefile:945: all] Error 2
I also tried to install clang++ but it needs tons of other dependecies.
Do you have any hint on how to install just the gcc-c++ compiler?
Why don't you run dnf install gcc-c++? It will install the C++ system compiler bring in linking support for libstdc++ as well.
I need to install gcc 4.7.x on my fedora 23 in order to make Matlab compile the code. I also came across an error when I was trying to use Cuda which required gcc 4.9.x or lower.
I tried to compile gcc-4.7.4 from scratch but I get the following errors:
Makefile:4107: recipe for target 'all-stage1-gcc' failed
make[2]: *** [all-stage1-gcc] Error 2
make[2]: Leaving directory '/home/x/src/objdir'
Makefile:19334: recipe for target 'stage1-bubble' failed
make[1]: *** [stage1-bubble] Error 2
make[1]: Leaving directory '/home/x/src/objdir'
Makefile:903: recipe for target 'all' failed
make: *** [all] Error 2
I made a separate directory for configuration and building and I ran the configure as:
../gcc-4.7.4/configure --enable-languages=c,c++ --disable-multilib --prefix=$HOME/gcc-4.7.4
However I think the problem rises from the fact that I am using gcc-5.3.1 to compile gcc-4.7.4 but I have no idea how to fix it.
I noticed there is no packages available from dnf to install gcc-4.7.x either.
It looks like you put your build dir inside the source tree. Don't do that. Follow the wiki's instructions.
do not run ./configure from within the source directory, this is not supported. You need to run configure from outside the source directory, in a separate directory created for the build
It'll look something like this:
tar xzf gcc-4.7.4.tar.gz
cd gcc-4.7.4
./contrib/download_prerequisites
cd ..
mkdir objdir
cd objdir
$PWD/../gcc-4.7.4/configure --no-multilib --prefix=$HOME/gcc-4.7.4 --enable-languages=c,c++
make
make install
This question is a little dated now, but patching gcc/cp/cfns.gperf did the trick for me. See here: https://gist.github.com/joka90/bb8ef36aa755994d3b3d/. Built using gcc 5.3.1 under Fedora 23.
#Download and apply fix to be able to build gcc 4.7 with gcc 5.1
cd /path/to/build/gcc/source
wget https://patchwork.ozlabs.org/patch/504982/raw/ -O cfns-fix-mismatch-in-gnu_inline-attributes.patch
patch -p1 -i cfns-fix-mismatch-in-gnu_inline-attributes.patch
I have installed mingw64 and MSYS2 from the official site (http://mingw-w64.org/doku.php) following the instructions. Added bin folders to win7 PATH var. Everything seems to work. I run this command from MSYS2:
gcc --version
and it works.
Now I´m trying to install Lua 5.3 (lua-5.3.1.tar.gz from lua.org). I decompressed the file using WinRAR. From MSYS2, I go to my Lua directory
cd /e/Programming/Libs/lua-5.3.1/
then I run the make command
mingw32-make mingw
But it doesn´t work. I got this message...
cd src && E:/Programming/mingw64/mingw64/bin/mingw32-make mingw
mingw32-make[1]: Entering directory 'E:/Programming/Libs/lua-5.3.1/src'
E:/Programming/mingw64/mingw64/bin/mingw32-make "LUA_A=lua53.dll" "LUA_T=lua.exe" \
"AR=gcc -std=gnu99 -shared -o" "RANLIB=strip --strip-unneeded" \
"SYSCFLAGS=-DLUA_BUILD_AS_DLL" "SYSLIBS=" "SYSLDFLAGS=-s" lua.exe
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- =
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- g
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- u
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- 9
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- 9
E:\Programming\mingw64\mingw64\bin\mingw32-make: invalid option -- a
E:\Programming\mingw64\mingw64\bin\mingw32-make: unrecognized option '--strip-unneeded SYSCFLAGS=-DLUA_BUILD_AS_DLL SYSLIBS= SYSLDFLAGS=-s lua.exe'
Usage: mingw32-make [options] [target] ...
This program built for x86_64-w64-mingw32
Report bugs to <bug-make#gnu.org>
makefile:116: recipe for target 'mingw' failed
mingw32-make[1]: *** [mingw] Error 2
mingw32-make[1]: Leaving directory 'E:/Programming/Libs/lua-5.3.1/src'
makefile:55: recipe for target 'mingw' failed
mingw32-make: *** [mingw] Error 2
I dont want to download Lua binaries, I want to compile it myself
How can I fix this?
I was having the same issue. I looked at this page:
http://www.thijsschreijer.nl/blog/?p=863
What I saw was that I did not have c:\mingw\msys\1.0\bin in my path variable. I added it just after the MinGW\bin path and it worked fine then.
I'm on Debian and following the compile instructions from the Rust wiki: https://github.com/mozilla/rust/wiki/Doc-getting-started
I tried a couple of times but it always ends up with the following error:
llvm[3]: Compiling opt.cpp for Release+Asserts build
make[3]: *** No rule to make target `/home/user/rust/llvm/x86_64-unknown-linux-
gnu/tools/lib/libLLVMipo.a', needed by `/home/user/rust/llvm/x86_64-unknown-
linux-gnu/Release+Asserts/bin/opt'. Stop.
make[3]: Leaving directory `/home/user/rust/llvm/x86_64-unknown-linux-gnu/
tools/opt'
make[2]: *** [opt/.makeall] Error 2
make[2]: Leaving directory `/home/user/rust/llvm/x86_64-unknown-linux-gnu/tools'
make[1]: *** [all] Error 1
make[1]: Leaving directory `/home/user/rust/llvm/x86_64-unknown-linux-gnu'
make: *** [/home/user/rust/llvm/x86_64-unknown-linux-gnu/Release+Asserts/
bin/llvm-config] Error 2
Edit:
The problem only occurs whithin a debootstrap/chroot environment, not within a full Debian Installation.
If you're referring to these instructions:
git clone git://github.com/mozilla/rust.git
cd rust
mkdir build
cd build
../configure
make check
...I can see at least one thing wrong with them. Try this instead:
git clone git://github.com/mozilla/rust.git
cd rust
git submodule update --init
./configure
make
sudo make install
The git submodule update --init is necessary to initialize Rust's submodules, which include LLVM and libuv.
git submodule update shouldn't be needed, as Rust's configure script tries to handle that itself, but if you run git submodule status and see lines about changes to src/libuv or src/llvm then it could be a problem.
I haven't seen that error before and can't tell what's wrong from that snippet. Possibly run make clean-all then gist the full output of ./configure && make, as well as the contents of config.mk. Also, you will probably get more attention with this question on the rust bug tracker: http://github.com/mozilla/rust/issues
I have tried to compile clang and llvm using the clang getting started manual. However, at step 5, when I do make, I get the following error. Any idea what is going on here, and how to fix it? Note that I am using Ubuntu 10.04 on a 64 bit x86 system.
cp: cannot stat `/home/MetallicPriest/Desktop/build/tools/clang/runtime/compiler-rt/clang_linux/full-x86_64/libcompiler_rt.a': No such file or directory
make[4]: *** [/home/MetallicPriest/Desktop/build/Debug+Asserts/lib/clang/3.1/lib/linux/libclang_rt.full-x86_64.a] Error 1
rm /home/MetallicPriest/Desktop/build/Debug+Asserts/lib/clang/3.1/lib/linux/.dir
make[4]: Leaving directory `/home/MetallicPriest/Desktop/build/tools/clang/runtime/compiler-rt'
make[3]: *** [compiler-rt/.makeall] Error 2
make[3]: Leaving directory `/home/MetallicPriest/Desktop/build/tools/clang/runtime'
make[2]: *** [all] Error 1
make[2]: Leaving directory `/home/MetallicPriest/Desktop/build/tools/clang'
make[1]: *** [clang/.makeall] Error 2
make[1]: Leaving directory `/home/MetallicPriest/Desktop/build/tools'
make: *** [all] Error 1
## Heading ##
The instruction given on this site work!
I had the same problem. As Eli suggested, I got the 3.0 release. It doesn't come with a 'getting started' but you can follow the INSTALL file from clang's root top.
You should be able to copy/paste the following (as root of course for the /usr/local/ part)
export NUMCPU=4 # or however many cores you want to paralell build with
export ORIGDIR=$PWD
wget http://llvm.org/releases/3.0/llvm-3.0.tar.gz
tar -zxf llvm-3.0.tar.gz
cd llvm-3.0.src/tools
wget http://llvm.org/releases/3.0/clang-3.0.tar.gz
tar -zxf clang-3.0.tar.gz
mv clang-3.0.src clang
cd $ORIGDIR
mkdir build
cd build
../llvm-3.0.src/configure --prefix=/usr/local
make -j$NUMCPU
cd tools/clang
make install
--
update, I should also note that following the 'getting started guide' with latest subversion (2012 09 10) actually does work , and i copy/pasted the lines exactly from the 'getting started' page http://clang.llvm.org/get_started.html (including 'optional' stuff) on a Fedora machine on ppc64.