After installing VMware ESXi 7 with VMware Workstation, I can't access it from web client from the displayed IP.
This is my IPv4 configuration.
Any idea how to fix this?
Try to ping your ESXi, check your network configuration gateway and IP address.
How did you configure vmware workstation ? I guess your issue come from your network configuration on vmware workstation.
This documentation may help you to choose the right network to use on Vmware Workstation for your need. https://docs.vmware.com/en/VMware-Workstation-Player-for-Windows/16.0/com.vmware.player.win.using.doc/GUID-C82DCB68-2EFA-460A-A765-37225883337D.html
Add https:// before the IP address.
Related
I have installed owasp bwa in virtual box. And when I run the vm I got an IP address to connect to.But, when I'm trying to access it using http://ip-address, it failed to connect. And I'm not able to ping it from my host network.
Go to VM Network settings and and change it to Bridge Adapter.
I've installed pfsense 2.3 x64 in virtualbox with 2 adapters; One is bridged to my wifi adapter (adsl modem) (WAN) and the other one set as'Internal network' ('intnet') (Lan);
The problem is that although pfsense can automatically detect dhcp over first adapter and get an IP but my system (the host) can not ping the pfsense server (pfsense can ping both adsl modem gateway and the host).
Note1: Disabling the antivirus and firewall (kaspersky internet security 2016) has no effect.
Note2: I know that this setup works because I use the exact same network configurations for a Kerio Control server (v9.0.2, installed in virtualbox)
Note3: If I constantly ping pfsense server in my host (ping 192.168.1.102 -t) and at the same time restart pfsense server, during the booting phase of pfsense I can get two pings!
After contacting the pfsense official forum, it turned out that the WAN interface blocks everything by default. Therefore, either a rule should be defined to allow WAN to accept traffic or access server from LAN side.
I figured this out without having to go through the WAN interface, answer is on the pfsense forum
Configure host-only network "vboxnet1" (or any of the other host-only networks if you're already using vboxnet1 for other VMs) with the following:
192.168.1.77 (or whatever IP you want your host to appear as on the network)
255.255.255.0
DHCP Disabled
The make sure that the LAN adapter on your pfSense VM is a "Host-only Adapter" and that it's using "vboxnet1" (or whatever network you configured above)
Reboot/re-install and http://192.168.1.1 should work now
I have a FreeNAS vm running in ESXi 6. I have installed VirtualBox jail on FreeNAS and assigned it a static IP.
I can ping that IP from shell in FreeNAS, but not from any of my other virtual machines.
They are all on the same subnet.
What can I try to fix this?
Firstly, FreeNAS should not be installed within a VM environment especially for production systems. This is also mentioned repeatedly on FreeNAS support and forums. I hope you are just conducting testing.
Back to your question, have you checked your firewalls / routing on your ESXi VMs, VB VMs, FreeNAS? I haven't tried this particular configuration before but typically its incorrect network settings that prevent pings. Have you tried dynamic IP?
I have a windows server 2003 as the guest in VMware player and windows 7 enterprise as the host. I'm trying to connect to the inernet from my guest and i can't. In my VMware player virtual machine settings my network addapter is set to NAT but i can't get it to work.My host is in the work LAn and connected to the internet through it. Could this have something to do with it not working properly? Do I have to perform some special setup?
The problem may be caused by:
You're NATting to the wrong host's network interface in the VM's option.
Your VM's NIC DNS configuration is wrong. To verify this issue, try to PING the host's NIC from the VM.
I'm trying to install a WSO2 EMM server on Amazon EC2 Instance, but have a problem with it. EC2 instance have 2 IP addresses - one of them is internal Amazon address like 172.32.x.x, another is external real IP.
If I try to setup carbon.xml file with real IP (or domain), I have a problem with thrift server, which can't open port 10500 at a real IP. If I use internal IP running of server is fine, but in application I can't reach identity server (because it's a gray IP, of course).
I tried some tricks with using /etc/hosts file, for example, setup 0.0.0.0 as my domain. In this case server is running without errors, and a can see that port 10500 is open using netstat, but web application is not redirect to identity server.
May be there are any solutions of this problem?
I have to update EMM server to version 1.1.0 and all is working now.
Thanks all!
In the carbon.xml, change the HostName and MgtHostName to the real IP and start the server.
For example if the real IP is 172.32.x.x then HostName and MgtHostName in the carbon.xml should change to:
<HostName>172.32.x.x</HostName>
<MgtHostName>172.32.x.x</MgtHostName>