I’m having trouble generating a deployable binary for a C++ wxwidgets project using Visual Studio. After the build completes, the exe that is generated does not seem to get installed in any other Windows machine.
Visual studio 2019 is used to create GUI library with openCV included in it. I’m trying to create a standalone executable .exe to run it in any other Windows computer without installing visual studio or opencv in it.
Earlier, while opening the executable file in other computer, it gave error that dll’s are missing for openCV and wxwidgets. So, I have copied the required dll’s from the directories of openCV and wxwidgets bin folder. Now, when I try to execute the exe file, it shows the following error. Kindly help me to resolve this issue.
Applications built with the C/C++ runtimes dynamically linked (/MD[d]) require the appropriate x86 (32-bit) or x64 (64-bit) VC++ redistributables on the target machine. They can be installed from The latest supported Visual C++ downloads, or they can be included alongside the application for local deployment.
Also, be sure to only send out non-debug (Configuration = Release) builds.
MSVCP140D.dll
VCRUNTIME140D.dll
VCRUNTIME140_1D.dll
ucrtbased.dll
The 'D' suffix in the names of those missing DLLs stands for "Debug". Those are the debug C/C++ runtime DLLs, which are used by the Configuration = Debug builds, and are installed as part of the Visual Studio setup. They are to be used during development, but not otherwise deployed, per Determining Which DLLs to Redistribute:
Debug versions of applications and the various Visual C++ debug DLLs are not redistributable.
It also seems that you are using DLL build of wxWidgets and you build OpenCV as DLL.
If you yourself does not create a DLL and your software is one self contained binary ou will be better off using static linking wxWidgets and OpenCV.
And on top of what #dxiv, not everything in MS CRT can be used statically linked. That's why it is strongly recommended to install MS CRT by creating an installer, which should take care of all those dependencies.
HTH.
Thank you.
Related
Hello I have downloaded and unzipped OpenCV-2.4.10.exe on my PC. Then created a new Win32 Console application project in VS 2015, set all the Paths in Project properties, set the environmental variables in Win8.1. When I'm trying to start the program in debugging mode I get the "The program can't start because MSVCP120D.dll is missing from your computer. Try reinstalling the program to fix this problem".
Then, I downloaded the Visual C++ redistributable for Visual Studio 2015 But the problem still remains. What should I do to use OpenCV in VS 2015?
OpenCV-2.4.10.exe comes with runtime binary dlls built to work with runtimes from vc10 (vs2010), vc11 (vs2012) and vc12 (vs2013).
These DLL files use MSVCP100.dll, MSVCP110.dll and MSVCP120.dll respectively, and if you have installed Visual Studio 2015 you should find them in your System32 (or SysWOW64) directory.
The MSVCP120D.dll error appears when your application tries to load the DEBUG version of the DLL binaries. You do not have MSVCP120D.dll unless you have Visual Studio 2013 installed on your system. To solve this problem, use the Release runtime instead of the Debug runtime.
All you need to do is exclude the DEBUG lib files from your project. This means including only the lib files without the suffix 'd'. (ie. include opencv_core2410.lib instead of opencv_core2410d.lib)
HTH
Extras:
You don't really need to load the Debug binaries, unless you need to debug openCV's source code. If you do, there's still a way. Download the openCV source code, use CMake to create a VS2015 project. You can then build your own dll binaries using the latest runtime from VS2015.
VS2015 uses vc14 while OpenCV2.4.10 doesn't come with pre-built binaries associated with vc14. This answer should help you to understand. Accordingly you should choose the right folder (vc14) for Linker>General>Additional Library Directories in project properties.
You can use cmake to build binaries using VS2015 or you can download a later version of OpenCV which has prebuilt binaries for vc14.
I am running Microsoft Visual Studio Express 2012 for Windows Desktop on a 64 bit machine with windows 8.
I create a completely new Win32 Console Application (in C++) and accept the default options. I then build and run the solution in both debug and release modes and it works all find and dandy. Next I configure the include and library directories for the dynamic SFML library. I link to the debug and release .lib files and put the debug and release .dll files in the proper directories. I then add some simple code which uses the library, build and run the application in debug mode and I get this error: "The program can't start because MSVCR100D.dll is missing from your computer. Try reinstalling the program to fix this problem." If I build and run the application in release mode it works with no errors. (And yes I have the redistributables installed 32 and 64 bit.) Now from what I understand and according to this thread that .dll file is for debugging only and is not included in the redistributable package (which would explain why it doesn't work in debug mode). The answer says that developers have it installed with visual studio by default. This is obviously not the case as evidence from the error and I've reinstalled visual studio and restarted my computer twice now.
In conclusion, how do I simply compile my solution in debug mode without getting this error?
I'm afraid someone will mark this as a duplicate so here we go:
LINK - "...you appear to be linking to the debug version of the runtime, it is not normal to distribute apps linked against the debug version of the runtime."
Doesn't pertain to me because I'm not distributing this app, just trying to run it in debug mode.
LINK - "I compiled my program using Microsoft visual c++ 2010 Express Edition and tried to run it on another machine that did not have the same compiler."
This person get's the error when he runs what hes compiled on a different computer, not when actually compiling the application.
LINK - "If you get this error for your release build..."
I dont.
LINK - "You can compile your project in "Release"..."
My project is not ready to be released therefore I should compile my project in debug mode.
MSVCR100D.dll is the dll for Visual Studio 10, so somewhere something is depending on it (the SFML dlls?). Whatever you compile (in debug mode) with Visual Studio 2012 will require MSVCR110D.dll, which you should have available on your machine as part of the installation.
I suggest you build SFML yourself on your own version of Visual Studio, it's pretty easy. In fact, the binaries available on the site as part of the SFML 2.0 RC are rather old and you'll do yourself a huge favor by building from the latest sources, as a lot of fixes and improvement were applied in the meantime.
(Also, definitely use 2.0 instead of 1.6. The site is rather misleading, but on the SFML forums virtually everyone will recommend you use the last version)
This message generally states that the dll is referred to directly or indirectly in your application and is missing.
The 'D' at the end show us this is the Debug version of the file, this is DLL file is provided with the Visual Studio 2010 installation. So the MSVCR100D.dll would be provided with the installation of Visual Studio 2010.
Of course, you could be missing other versions 2008 (MSVCR90D) 2010 (MSVCR100D) 2012 (MSVCR110D) or the 2013 (MSVCR120D), each dll is provided according to the Visual Studio version.
There are a few ways to solve this:
Check to be sure that you're compiling all the components of your
project in Release mode. If this does not solve the issue continue
to the next steps.
You could solve this locally by installing Visual Studio 2010 on your
machine. This is not what I would recommend, but it would surely
overcome the issue
You could also download the file from this third party website and
copy it to your projects bin:
http://www.dll-files.com/dllindex/dll-files.shtml?msvcr100d
This option is the LEAST recommended option.
Run dependency Walker and see what file depends on the MSVCR100D.dll
and the try and fix that file in order to break your dependency. You can download depends here: http://www.dependencywalker.com/
Check to be sure that you're project is linking the correct version of
the CRT and any other libraries you may be using (e.g., MFC, ATL,
etc.)
Note: Installing the redistributables alone will NOT solve this problem, since the redistributables only contain the release version of the file MSVCR100.dll (notice no 'D')
MSVCR100D is part of the 2010 Visual Studio package - indicating that some components of your system are compiled with the older version of Visual Studio, so you will need to install the Visual Studio 2010 version - you can probably still develop with the 2012 version, just as long as [parts of] the 2010 is on the machine.
Or you need to recompile some components that your application depends on to use the 2012 (msvcr110d) libraries - if you have all the source code, that would be my preferrred method.
I've made a simple OpenCV application with Visual Studio 2008 and I've built it in both release mode and debug mode.It works fine from my computer but when I try to run it from another computer which doesn't have OpenCV installed or has another version of Visual Studio with OpenCV it doesn't work.
How can I make the app work from a computer which doesn't have either Visual Studio or OpenCV installed ?
I'm thinking to add the external dependencies ( lib's and dll's ) into the app's folder, change the path in Visual Studio and rebuild it.
Thanks in advance and sorry for the ultranoobish question :)
You don't need to distribute the libs; those are just needed for building the executable.
Just copy the dlls somewhere where the executable can see them (either in the same dir as the exe, or in a dir that's on the system path) and you should be golden.
Copying DLL's with the application or to the path is a good start, but may not be enough. It took me a long time to find out why OpenCV application didn't work on another machine. Visual Studio runtime and OpenMP are used by OpenCV. Those are not installed by default and error messages, if any, are not all that helpful.
You need to build OpenCV and your application with setting (in Visual Studio):
Configuration Properties -> C/C++ -> Code Generation -> Runtime Library -> Multi-threaded (/MT)
You need to disable OpenMP support too if that's the problem. Build system changed with OpenCV 2.0. If I remember right, older version had different project files for version without OpenMP.
My C(++) program, written and compiled using Visual C(++)/Visual Studio, runs fine on my own machine, but refuses to run on another machine. The error message I get is "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem."
If you write a C++ program, it links dynamically to the C Runtime Library, or CRT for short. This library contains your printf, your malloc, your strtok, etcetera. The library is contained in the file called MSVCR80.DLL. This file is not by default installed on a Windows system, hence the application cannot run.
The solution? Either install the DLL on the target machine through VCREDIST.EXE (the Visual C++ Redistributable Package), or link to the CRT statically (plug the actual code for the used functions straight into your EXE).
Distributing and installing VCREDIST along with a simple application is a pain in the arse, so I went for the second option: static linking. It's really easy: go to your project's properties, unfold C/C++, click Code Generation, and set the Runtime Library to one of the non-DLL options. That's all there is to it.
The problem here is a missing DLL dependency, such as the CRT (C Runtime Library). A good tool for diagnosing this sort of problem is Dependency Walker (depends.exe), which you can find here:
http://www.dependencywalker.com/
You would run this program on the computer that generates the error message you posted, and use it to open the exe that's generating this error. Dependency Walker will quickly and graphically indicate any DLLs that are required but not available on the machine.
Chances are high that you miss the runtime libraries of Visual Studio (CRT amongst others), you can either get rid of those dependencies (link statically) or install the VC redist packages on the target computer.
Depending on the Visual C++ version you use, you have to install different packages :
Visual C++ 2005
Visual C++ 2005 SP1
Visual C++ 2008
Warning : those packages only contain release versions of the libraries, if you want to be able to distribute debug builds of your application you'll have to take care of the required DLL yourself.
It is much the simplest to link to the runtime statically.
c++ -> Code Generation -> Runtime Library and select "multi-threaded /MT"
However, this does make your executable a couple hundred KByte larger. This might be a problem if you are installing a large number of small programs, since each will be burdened by its very own copy of the runtime. The answer is to create an installer.
New project -> "setup and deployment" -> "setup project"
Load the output from your application projects ( defined using the DLL version of the runtime ) into the installer project and build it. The dependency on the runtime DLL will be noticed, included in the installer package, and neatly and unobtrusively installed in the correct place on the target machine.
The correct VC Redist package for you is part of your Visual Studio installation. For VC 8, you can find it here:
\Program Files\Microsoft Visual Studio 8\SDK\v2.0\BootStrapper\Packages\vcredist_x86
POSSIBLE SOLUTION........
EDIT: (removed most of my post)
Long story short, I was having similar problems, getting the "Application Configuration Incorrect" messages, etc etc.
Depends.exe was only finding ieshims.dll and wer.dll as possible issues, but this is not the problem.
I ended up using the Multithreaded (/mt) compile option.
What HAS worked though, as a workable solution, is making an installer with InstallShield.
I've selected several merge modules in installshield builder and this seems to have fixed my problem. The modules selected were:
VC++ 9.0 CRT, VC++ 9.0 DEBUG CRT, and the CRT WinSXS MSM merge module.
I'm pretty sure its the WinSXS merge module that has fixed it.
DEBUG CRT: I noticed somewhere that (no matter how hard I tried, and obviously failed thus far), my Release version still depended on the DEBUG CRT. If this is still the case, the InstallShield merge module has now placed the DEBUG CRT folder in my WinSXS folder :) Being somewhat of a novice with VC++ I assume that this would normally be used to distribute debug versions of your programs to other people. To test if this is what fixed my problem I removed the DEBUG CRT folder from the WinSXS folder and the application still worked. (Unless something is still running in the background etc etc - I'm not that into it)
Anyway, this has got things working for me on an XP SP3 fully updated machine, and also on a VMWare XP SP3 machine with the bare bones (.net 3.5 and VC++ 2008 RTM basically) - and also on a mate's XP machine where it previously wasn't working.
So give these things a try, you might have some luck.
First thing you must use
#define _BIND_TO_CURRENT_VCLIBS_VERSION 1
or add _BIND_TO_CURRENT_VCLIBS_VERSION=1 to the preprocessor directives.
The problem is related to binding and the manifest types, you can find more http://www.nuonsoft.com/blog/2008/10/29/binding-to-the-most-recent-visual-studio-libraries/
By doing this your application will run with a larger range of runtime libraries versions.
Often times this error is the result of attempting to run the debug version of an application that uses .NET. Since the .NET redistributable package doesn't include the debug versions of the dlls that are installed with Visual Studio, your application will often get this error when running it on any other machine that doesn't have Visual Studio installed. If you haven't already, try building a release version of your application and see if that works.
Note also - that if you change to static runtime, you will have to do the same for MFC if your app uses MFC. Those settings are in properties->Configuration/General
I ran into this problem and was able to fix it very simply.
Visual studio gives you the option (on by default) to build a manifest for each build.
The manifest was put in the release folder, but it was a different release folder than the exe.
Even when using the setup utilities it was not packaged.
You should look for a file names something like myprogram.exe.indermediate.manifest
If this is in the same folder as the exe (and you have all the dlls) it should run
After compiling a simple C++ project using Visual Studio 2008 on vista, everything runs fine on the original vista machine and other vista computers. However, moving it over to an XP box results in an error message: "The application failed to start because the application configuration is incorrect".
What do I have to do so my compiled EXE works on XP and Vista? I had this same problem a few months ago, and just fiddling with some settings on the project fixed it, but I don't remember which ones I changed.
You need to install the Visual Studios 2008 runtime on the target computer:
http://www.microsoft.com/downloads/details.aspx?FamilyID=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en
Alternatively, you could also link the run time statically, in the project properties window go to:
c++ -> Code Generation -> Runtime
Library and select "multi-threaded
/MT"
You need to install the runtime redistributable files onto the machine you are trying to run the app on.
The redistributable for 2008 is here.
The redistributable for 2005 is here.
They can be installed side-by-side, in case you need both.
You probably need to distribute the VC runtime with your application. There are a variety of ways to do this. This article from the Microsoft Visual C++ Team best explains the different ways to distribute these dependencies if you are using Visual Studio 2005 or 2008.
As stated in the article, though you can download the Redistributable installer package and simply launch that on the client machine, that is almost always not the optimal option. There are usually better ways to include the required DLLs such as including the merge module if you are distributing via Windows Setup or App-Local copy if you just want to distribute a zipped folder.
Another option is to statically link against the runtime libraries, instead of distributing them with your application. This option is only suitable for standalone EXEs that do not load other DLLs. You also cannot do this with DLLs that are loaded by other applications.
It is much the simplest to link to the runtime statically.
c++ -> Code Generation -> Runtime Library and select "multi-threaded /MT"
However, this does make your executable a couple hundred KByte larger. This might be a problem if you are installing a large number of small programs, since each will be burdened by its very own copy of the runtime. The answer is to create an installer.
New project -> "setup and deployment" -> "setup project"
Load the output from your application projects ( defined using the DLL version of the runtime ) into the installer project and build it. The dependency on the runtime DLL will be noticed, included in the installer package, and neatly and unobtrusively installed in the correct place on the target machine.
Visual studio 2005 actually has two
The one for the original release
and the one for SP1