I am attempting to write a program which can read in a text file, and store each word in it as an entry in a string type vector. I am sure that I am doing this very wrong, but it has been so long since I have tried to do this that I have forgotten how it is done. Any help is greatly appreciated. Thanks in advance.
Code:
#include <iostream>
#include <fstream>
#include <vector>
#include <string>
using namespace std;
int main()
{
vector<string> input;
ifstream readFile;
vector<string>::iterator it;
it = input.begin();
readFile.open("input.txt");
for (it; ; it++)
{
char cWord[20];
string word;
word = readFile.get(*cWord, 20, '\n');
if (!readFile.eof())
{
input.push_back(word);
}
else
break;
}
cout << "Vector Size is now %d" << input.size();
return 0;
}
One of the many possible ways is a simple:
std::vector<std::string> words;
std::ifstream file("input.txt");
std::string word;
while (file >> word) {
words.push_back(word);
}
operator >> takes care of only words divided by whitespaces (including new-lines) being read.
And in case you would be reading it by lines, you might also need to explicitly handle empty lines:
std::vector<std::string> lines;
std::ifstream file("input.txt");
std::string line;
while ( std::getline(file, line) ) {
if ( !line.empty() )
lines.push_back(line);
}
#include <fstream>
#include <vector>
#include <string>
#include <iostream>
#include <algorithm>
#include <iterator>
using namespace std;
int main()
{
vector<string> input;
ifstream readFile("input.txt");
copy(istream_iterator<string>(readFile), {}, back_inserter(input));
cout << "Vector Size is now " << input.size();
}
Or, shorter:
int main()
{
ifstream readFile("input.txt");
cout << "Vector Size is now " << vector<string>(istream_iterator<string>(readFile), {}).size();
}
I'm not going to explain, because there's about a zillion explanations on StackOverflow already :)
Related
#include<bits/stdc++.h>
using namespace std;
int main()
{
int i=0;
char a[100][100];
do {
cin>>a[i];
i++;
}while( strcmp(a[i],"\n") !=0 );
for(int j=0;j<i;i++)
{
cout<<a[i]<<endl;
}
return 0;
}
Here , i want to exit the do while loop as the users hits enter .But, the code doesn't come out of the loop..
The following reads one line and splits it on white-space. This code is not something one would normally expect a beginner to write from scratch. However, searching on Duckduckgo or Stackoverflow will reveal lots of variations on this theme. When progamming, know that you are probably not the first to need the functionality you seek. The engineering way is to find the best and learn from it. Study the code below. From one tiny example, you will learn about getline, string-streams, iterators, copy, back_inserter, and more. What a bargain!
#include <iostream>
#include <string>
#include <sstream>
#include <algorithm>
#include <iterator>
#include <vector>
int main() {
using namespace std;
vector<string> tokens;
{
string line;
getline(cin, line);
istringstream stream(line);
copy(istream_iterator<string>(stream),
istream_iterator<string>(),
back_inserter(tokens));
}
for (auto s : tokens) {
cout << s << '\n';
}
return 0;
}
First of all, we need to read the line until the '\n' character, which we can do with getline(). The extraction operator >> won't work here, since it will also stop reading input upon reaching a space. Once we get the whole line, we can put it into a stringstream and use cin >> str or getline(cin, str, ' ') to read the individual strings.
Another approach might be to take advantage of the fact that the extraction operator will leave the delimiter in the stream. We can then check if it's a '\n' with cin.peek().
Here's the code for the first approach:
#include <iostream> //include the standard library files individually
#include <vector> //#include <bits/stdc++.h> is terrible practice.
#include <sstream>
int main()
{
std::vector<std::string> words; //vector to store the strings
std::string line;
std::getline(std::cin, line); //get the whole line
std::stringstream ss(line); //create stringstream containing the line
std::string str;
while(std::getline(ss, str, ' ')) //loops until the input fails (when ss is empty)
{
words.push_back(str);
}
for(std::string &s : words)
{
std::cout << s << '\n';
}
}
And for the second approach:
#include <iostream> //include the standard library files individually
#include <vector> //#include <bits/stdc++.h> is terrible practice.
int main()
{
std::vector<std::string> words; //vector to store the strings
while(std::cin.peek() != '\n') //loop until next character to be read is '\n'
{
std::string str; //read a word
std::cin >> str;
words.push_back(str);
}
for(std::string &s : words)
{
std::cout << s << '\n';
}
}
You canuse getline to read ENTER, run on windows:
//#include<bits/stdc++.h>
#include <iostream>
#include <string> // for getline()
using namespace std;
int main()
{
int i = 0;
char a[100][100];
string temp;
do {
getline(std::cin, temp);
if (temp.empty())
break;
strcpy_s(a[i], temp.substr(0, 100).c_str());
} while (++i < 100);
for (int j = 0; j<i; j++)
{
cout << a[j] << endl;
}
return 0;
}
While each getline will got a whole line, like "hello world" will be read once, you can split it, just see this post.
I need to parse a table of numbers formatted as ascii text. There are 36 space delimited signed integers per line of text and about 3000 lines in the file. The input file is generated by me in Matlab so I could modify the format. On the other hand, I also want to be able to parse the same file in VHDL and so ascii text is about the only format possible.
So far, I have a little program like this that can loop through all the lines of the input file. I just haven't found a way to get individual numbers out of the line. I am not a C++ purest. I would consider fscanf() but 36 numbers is a bit much for that. Please suggest practical ways to get numbers out of a text file.
int main()
{
string line;
ifstream myfile("CorrOut.dat");
if (!myfile.is_open())
cout << "Unable to open file";
else{
while (getline(myfile, line))
{
cout << line << '\n';
}
myfile.close();
}
return 0;
}
Use std::istringstream. Here is an example:
#include <sstream>
#include <string>
#include <fstream>
#include <iostream>
using namespace std;
int main()
{
string line;
istringstream strm;
int num;
ifstream ifs("YourData");
while (getline(ifs, line))
{
istringstream strm(line);
while ( strm >> num )
cout << num << " ";
cout << "\n";
}
}
Live Example
If you want to create a table, use a std::vector or other suitable container:
#include <sstream>
#include <string>
#include <fstream>
#include <iostream>
#include <vector>
using namespace std;
int main()
{
string line;
// our 2 dimensional table
vector<vector<int>> table;
istringstream strm;
int num;
ifstream ifs("YourData");
while (getline(ifs, line))
{
vector<int> vInt;
istringstream strm(line);
while ( strm >> num )
vInt.push_back(num);
table.push_back(vInt);
}
}
The table vector gets populated, row by row. Note we created an intermediate vector to store each row, and then that row gets added to the table.
Live Example
You can use a few different approaches, the one offered above is probable the quickest of them, however in case you have different delimitation characters you may consider one of the following solutions:
The first solution, read strings line by line. After that it use the find function in order to find the first position o the specific delimiter. It then removes the number read and continues till the delimiter is not found anymore.
You can customize the delimiter by modifying the delimiter variable value.
#include <iostream>
#include <string>
#include <fstream>
using namespace std;
int main()
{
string line;
ifstream myfile("CorrOut.dat");
string delimiter = " ";
size_t pos = 0;
string token;
vector<vector<int>> data;
if (!myfile.is_open())
cout << "Unable to open file";
else {
while (getline(myfile, line))
{
vector<int> temp;
pos = 0;
while ((pos = line.find(delimiter)) != std::string::npos) {
token = line.substr(0, pos);
std::cout << token << std::endl;
line.erase(0, pos + delimiter.length());
temp.push_back(atoi(token.c_str()));
}
data.push_back(temp);
}
myfile.close();
}
return 0;
}
The second solution make use of regex and it doesn't care about the delimiter use, it will search and match any integers found in the string.
#include <iostream>
#include <string>
#include <regex> // The new library introduced in C++ 11
#include <fstream>
using namespace std;
int main()
{
string line;
ifstream myfile("CorrOut.dat");
std::smatch m;
std::regex e("[-+]?\\d+");
vector<vector<int>> data;
if (!myfile.is_open())
cout << "Unable to open file";
else {
while (getline(myfile, line))
{
vector<int> temp;
while (regex_search(line, m, e)) {
for (auto x : m) {
std::cout << x.str() << " ";
temp.push_back(atoi(x.str().c_str()));
}
std::cout << std::endl;
line = m.suffix().str();
}
data.push_back(temp);
}
myfile.close();
}
return 0;
}
I have this .txt file that has a lot of words ( one each line ).
I tried
ifstream myReadFile;
myReadFile.open("restrict_words.txt");
char output[100];
if (myReadFile.is_open()) {
while (!myReadFile.eof()) {
printf("mamao");
myReadFile >> output;
cout<<output;
}
}
But i dont know how to make it work like... where should i pass it path and stuff
I would like to do
while(reading){
stringArray.add(file.line);
}
How can i do that?
First, this: (!myReadFile.eof()) is wrong. See the link for why. Second. If all you want is to load a file of strings into an array, this will do it:
#include <iostream>
#include <fstream>
#include <iterator>
#include <string>
#include <vector>
int main()
{
std::ifstream inp("restrict_words.txt");
std::istream_iterator<std::string> inp_it(inp), inp_eof;
std::vector<std::string> words(inp_it, inp_eof);
// words now has ever whitespace separated string
// from the input file as a vector entry
for (auto s : words)
std::cout << s << '\n';
}
Suggested reading:
std::vector<>
std::string
std::istream_iterator<>
C++11 Range-based for loop
Do you mean this?
//untested
#include <vector>
#include <fstream>
#include <string>
#include <iostream> //edited
int main()
{
std::ifstream ist("restrict_words.txt");
std::string word;
std::vector<std::string> readWords;
while(ist >> word)
readWords.push_back(word);
//test
for(unsigned i = 0; i != readWords.size(); ++i)
std::cout << readWords.at(i) << '\n'; // or readWords[i] (not range checked)
}
EDIT:
For each individual line you would do:
std::string line;
std::vector<std::string> readLines;
while(std::getline(ist, line))
{
readLines.push_back(line);
}
I am attempting to write a program which can read in a text file, and store each word in it as an entry in a string type vector. I am sure that I am doing this very wrong, but it has been so long since I have tried to do this that I have forgotten how it is done. Any help is greatly appreciated. Thanks in advance.
Code:
#include <iostream>
#include <fstream>
#include <vector>
#include <string>
using namespace std;
int main()
{
vector<string> input;
ifstream readFile;
vector<string>::iterator it;
it = input.begin();
readFile.open("input.txt");
for (it; ; it++)
{
char cWord[20];
string word;
word = readFile.get(*cWord, 20, '\n');
if (!readFile.eof())
{
input.push_back(word);
}
else
break;
}
cout << "Vector Size is now %d" << input.size();
return 0;
}
One of the many possible ways is a simple:
std::vector<std::string> words;
std::ifstream file("input.txt");
std::string word;
while (file >> word) {
words.push_back(word);
}
operator >> takes care of only words divided by whitespaces (including new-lines) being read.
And in case you would be reading it by lines, you might also need to explicitly handle empty lines:
std::vector<std::string> lines;
std::ifstream file("input.txt");
std::string line;
while ( std::getline(file, line) ) {
if ( !line.empty() )
lines.push_back(line);
}
#include <fstream>
#include <vector>
#include <string>
#include <iostream>
#include <algorithm>
#include <iterator>
using namespace std;
int main()
{
vector<string> input;
ifstream readFile("input.txt");
copy(istream_iterator<string>(readFile), {}, back_inserter(input));
cout << "Vector Size is now " << input.size();
}
Or, shorter:
int main()
{
ifstream readFile("input.txt");
cout << "Vector Size is now " << vector<string>(istream_iterator<string>(readFile), {}).size();
}
I'm not going to explain, because there's about a zillion explanations on StackOverflow already :)
I want to put some text from a text file into an array, but have the text in the array as individual characters.
How would I do that?
Currently I have
#include <iostream>
#include <fstream>
#include <string>
#include <cmath>
#include <vector>
#include <sstream>
using namespace std;
int main()
{
string line;
ifstream myfile ("maze.txt");
if (myfile.is_open())
{
while ( myfile.good() )
{
getline (myfile,line);
// --------------------------------------
string s(line);
istringstream iss(s);
do
{
string sub;
iss >> sub;
cout << "Substring: " << sub << endl;
} while (iss);
// ---------------------------------------------
}
myfile.close();
}
else cout << "Unable to open file";
system ("pause");
return 0;
}
I'm guessing getline gets one line at a time. Now how would I split that line into individual characters, and then put those characters in an array?
I am taking a C++ course for the first time so I'm new, be nice :p
std::ifstream file("hello.txt");
if (file) {
std::vector<char> vec(std::istreambuf_iterator<char>(file),
(std::istreambuf_iterator<char>()));
} else {
// ...
}
Very elegant compared to the manual approach using a loop and push_back.
#include <vector>
#include <fstream>
int main() {
std::vector< char > myvector;
std::ifstream myfile("maze.txt");
char c;
while(myfile.get(c)) {
myvector.push_back(c);
}
}