I have only ever used git add . for this project, but somewhere along the line I started getting the strange "modified content, untracked content" error on one of my subdirectories (called users). Other stackoverflow answers didn't work for me. I used checkout to go back through previous commits, but the buggy/untracked subdirectory didn't change with the rest of the directory. I ended up making manual changes to it and then running git checkout master to make sure everything else was back where it started.
Git is saying that I'm bisecting, and it won't let me commit. I looked over stackoverflow answers, and tried some of the following commands:
git pull:
There is no tracking information for the current branch.
Please specify which branch you want to merge with.
git pull origin master:
fatal: 'origin' does not appear to be a git repository
git branch --set-upstream-to=origin/master master:
error: the requested upstream branch 'origin/master' does not exist
hint:
hint: If you are planning on basing your work on an upstream
hint: branch that already exists at the remote, you may need to
hint: run "git fetch" to retrieve it.
hint:
hint: If you are planning to push out a new local branch that
hint: will track its remote counterpart, you may want to use
hint: "git push -u" to set the upstream config as you push.
git pull --rebase:
There is no tracking information for the current branch.
Please specify which branch you want to rebase against.
Apologies if these commands are all over the place. I intend to really learn how git works soon, but right now I just want to commit the changes so I can deploy my project.
UPDATE: I used git bisect reset, created a new branch out of my detached head, and then merged with the master. This kept the changes I made, so now I just need to figure out how to get users tracked again in my commits. git add users still isn't doing anything.
Related
I have two branches one to pull and the other to work from my instructor made. The main branch is pulling but the working branch isn't. I tried pulling from the working branch, this is the message I'm getting.
" There is no tracking information for the current branch.
Please specify which branch you want to merge with.
See git-pull(1) for details.
git pull <remote> <branch>
If you wish to set tracking information for this branch you can do so with:
git branch --set-upstream-to=origin/<branch> working-branch"
I thought if the main branch updates so does the other branch.
I tried git pull and git pull origin-main as well as git fetch not working
I was publishing user pages with GitHub pages. After renaming my repository from username.github.io to username.github.io__, and renaming back my repo to username.github.io my pages are not showing up anymore.
The purpose of renaming my repo was to unpublish my pages for a short period of time.
Can someone give me a solution to republish my pages?
It was just needed to update with empty commit :
git commit -m 'rebuild pages' --allow-empty
git push
While an extra commit solves the problem, you should note a few things.
First, to fix the issue, push a new commit.
git commit --allow-empty -m "Empty commit"
git push
Second, make sure that the branch you committed is the master branch. For example, in my case, I make changes to the develop branch, and then I had to merge develop to master so that the actual page gets built again.
I need some help because I have some codes that I pulled from my repository branch and changed a couple of things in it.
What I need is to push it into another repository that I have been a collaborator in.
Been trying to push the codes, and trying to access it but to no avail.
Can anybody help me with this one? Any help will be greatly appreciated.
You have two different repositories where you manage to code. First one from where you clone/pull code and made some changes. Second one is what, where you want to push your latest code.
If you clone your repository from GIT then It automatically attach its GIT Url into your application. To check run this command
git remote -v
Result:
origin https://username#github.com/project-name.git (fetch)
origin https://username#github.com/project-name.git (push)
This is url from where you clone/pull your latest code. Now we have created alias of URL as ORIGIN.
so when ever you want to push your code, you will do
git push origin master
Now Add another GIT URL(remote) where you want to push your latest code.
git remote add origin_two https://username-two#github.com/project-name.git
So now commit your changes and made a pull request from your secondary GIT URL this way.
git pull origin_two master
If you got any conflicts then make corrections in code and then again add untracked files using
git add file-name
add a commit message
git commit -m "Your message"
and push your code to git
git push origin_two master
If you are working with branches:
You have two repositories now for a single application. So for that each repo has their own branches, to list down branches for each origin just follow
git branch -a
will list all the branches from two remotes. now If you really want to push on any other branch then you should commit all the changes on current branch an then move to your favorable branch using command
git branch branch-name
and do code here whatever code you will change now push to particular branch
git push origin_two branch-name
That's it :) Hope this can help you.
I'm confused about why my production server seems to think it is ahead of my master branch. I use fabric to deploy, and it runs a git pull on the server from my master branch on github. I make no changes that I'm aware of on the production server itself, and I certainly do not make commits on the production server.
git status yields:
# On branch master
# Your branch is ahead of 'github/master' by 57 commits.
#
nothing to commit (working directory clean)
As far as I can tell, what's on the production server matches the master branch on in my dev environment. At least the site acts the same, but I find this disconcerting. Any ideas on how to get the production repository on the same page as github master and stop giving me this message?
Edit (4/11/2013):
Just to clarify, when I use fabric to deploy, it runs:
git pull github master on the server.
My git status results written above in the original question, are on the server. I NEVER make commits on the server, only in my dev environment, which I push to github, which are in turn pulled to the server. That's why I'm confused. I certainly don't want to push anything from my production server to github, that's the opposite direction of my workflow.
2nd Edit (4/11/2013):
here's the fabfile git code:
def prepare_remote_deployment_area():
"""Prepare the production host with updated resources"""
with cd(DEPLOYMENT_ROOT):
run('git pull github master')
this is called from deploy:
def deploy():
"""Deploy an update (committed to GitHub) to production"""
check_git_status()
check_git_status(on_remote=True)
prepare_remote_deployment_area()
restart_uwsgi()
restart_nginx()
restart_celery()
Again, this all seems to work in the sense that the changes I make in my dev environment show up on production. I just don't understand why the production repository thinks it's so far ahead of github master.
Perhaps git pull
git pull origin master
More info
NAME
git-pull - Fetch from and merge with another repository or a local
branch
DESCRIPTION
Incorporates changes from a remote repository into the current
branch. In its default mode, git pull is shorthand for git fetch
followed by git merge FETCH_HEAD.
After copying a folder 'myapp' into to my working folder, I do the following to add it to my staging area:
git add .
and then commit the changes:
git commit
Then I push my changes to Heroku:
git push heroku master
So my folder, called 'myapp' is present on heroku, but the problem is that it's completely empty.
When I do the following,
git clone myapp myapp2
the folder clones properly on my local machine with all expected subcontents.
Does anyone know why the subfolders' contents are not being pushed to Heroku properly? What am I doing wrong?
To answer the questions below:
I am doing the git add . in my top level folder (the folder that contains folder myapp). Doing git status shows `no changes added to commit (use "git add" and/or "git commit -a")
Yes, myapp contains files/folders (my django project)
I deleted my .gitignore file because I placed my virtual environment in another place altogeher so it's no longer in my project folder so I don't think that's affecting it.
Ok, I seemed to have solved the problem. Somehow git got in a weird state. I don't really understand how, but for some reason it wasn't adding any of the files in the folder.
I simply copied that folder and gave it a new name, and then followed the exact same process I had been doing all along, and it finally uploaded properly.
By default, you cannot push changes to a checked-out branch of a repository. It usually causes major problems! Here is what usually happens:
$ git push heroku master
...error messages...
To heroku
! [remote rejected] master -> master (branch is currently checked out)
error: failed to push some refs to 'heroku'
Since you haven't mentioned any error messages, I'm assuming that you've added the following to your heroku repository configuration, or you're running a fairly old version of Git:
[receive]
denyCurrentBranch = false
It sounds like you want to check out a fresh copy of the master branch whenever you push a new version to your heroku repository. That can be achieved with a post-receive hook. Create a file in your heroku repository .git/hooks/post-receive, and give it +x permissions.
#!/bin/sh
while read oldrev newrev refname
do
if test "$refname" = refs/heads/master
then
( cd ..; GIT_DIR=.git; git reset --hard )
fi
done
Now, whenever you push a new master branch to heroku, the hook will run and check out the new branch. There are better ways to do this kind of thing, but this is simple.
Summary: By default, when you push changes, it only changes the history but not the working tree. The assumption is that someone might be working on that tree, so doing anything to it could be destructive.