My version of Python is [MSC v.1916 32 bit (Intel)] on win32 but I cannot see a release 1916 in -
http://www.gisinternals.com/release.php
https://www.lfd.uci.edu/~gohlke/pythonlibs/#gdal
https://trac.osgeo.org/osgeo4w/
Possibly I am misreading the websites. To be honest I found https://trac.osgeo.org/osgeo4w/ very confusing to navigate.
Can anyone give me any guidance?
Update
I used the 64bit OSGeo4W network installer from https://trac.osgeo.org/osgeo4w/
and everything is working now.
To find out if you need the 32 or 64 bit installer you can do
(project2_env) C:\Users\HP\django_project3>python
And it will give you below information.
Python 3.7.3 (default, Apr 24 2019, 15:29:51) [MSC v.1915 64 bit (AMD64)] :: Anaconda, Inc. on win32
Warning:
This Python interpreter is in a conda environment, but the environment has
not been activated. Libraries may fail to load. To activate this environment
please see https://conda.io/activation
Type "help", "copyright", "credits" or "license" for more information.
>>>
Related
when I open python console and close it by Ctrl + D,it comes with many logs.
why? how can I get rid of this.
$ /usr/local/bin/python
Python 2.7.13 (default, May 23 2017, 19:19:44)
[GCC 4.8.2 20140120 (Red Hat 4.8.2-15)] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> // close with Ctrl + D
profiling:/root/Python-2.7.13:Cannot create directory
profiling:/root/Python-2.7.13/Objects/bytes_methods.gcda:Skip
profiling:/root/Python-2.7.13:Cannot create directory
profiling:/root/Python-2.7.13/Python/structmember.gcda:Skip
profiling:/root/Python-2.7.13:Cannot create directory
profiling:/root/Python-2.7.13/Python/getcopyright.gcda:Skip
...
This happened to me using Debian Stretch whilst installing Python 3.6.1. I initially installed it with, "sudo make altinstall" which caused those errors. However, if you install it as root rather than using sudo, the errors go away.
I answered this question a bit late but I hope it helps someone.
This happened to me when I did ./configure --enable-optimizations. Removing the --enable-optimizations flag before compilation and installation makes these messages go away.
I have been listing the packages in an environment using 'conda list'. The list that is then produced doesn't include packages that I know are installed in the environment, in this case, flickrapi.
((getpics)) C:\Users\Rdebbout>conda list fl
packages in environment at C:\Users\Rdebbout\AppData\Local\Continuum\Anaconda2\envs\getpics:
pyflakes 1.1.0 py27_0
This is pointing to the correct environment and if you look below, when I am in the same environment, I can import flickrapi without a problem
((getpics)) C:\Users\Rdebbout>ipython
Python 2.7.11 |Continuum Analytics, Inc.| (default, Feb 16 2016, 09:58:36) [MSCv.1500 64 bit (AMD64)]
Type "copyright", "credits" or "license" for more information.
IPython 4.2.0 -- An enhanced Interactive Python.
? -> Introduction and overview of IPython's features.
%quickref -> Quick reference.
help -> Python's own help system.
object? -> Details about 'object', use 'object??' for extra details.
In [1]: from flickrapi import FlickrAPI
In [2]:
What is the reason for this?
I am trying to install Python 3.5.0 alongside with Python 2.7.4.
C:\Users\Animesh>python
Python 2.7.4 (default, Apr 6 2013, 19:55:15) [MSC v.1500 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>
C:\Users\Animesh>py
Python 2.7.4 (default, Apr 6 2013, 19:55:15) [MSC v.1500 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>
C:\Users\Animesh>py -2
Python 2.7.4 (default, Apr 6 2013, 19:55:15) [MSC v.1500 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
>>>
C:\Users\Animesh>py -3
Fatal Python error: Py_Initialize: unable to load the file system codec
File "E:\Python27\Lib\encodings\__init__.py", line 123
raise CodecRegistryError,\
^
SyntaxError: invalid syntax
Current thread 0x00003514 (most recent call first):
I tried a bunch of commands as shown above but python 3.5 does not seem to work. I even tried creating a project on PyCharm using the Python 3.5 interpreter but it gives that same error.
How should I rectify this error?
The official installer for Python will install 3.5 in C:\Program Files\Python 3.5.
It will automatically add this path to your PATH variable (if you tell it). It seems like you did not enable this option.
In your PATH (not PYTHONPATH) setting.
You can get to this by going to the Settings application and searching for environment, then clicking on "Edit environment variables for your account" - this will open a properties window; click Environment Variables on the bottom to load the settings for your account.
You need to add the path manually to the PATH variable, and remove the E:\Python2.7 path.
Do this, then restart your command prompt and the default Python version will be 3.5.
For PyCharm, you can just add a new local interpreter in settings (CTRL+ALT+S) and point it directly to the location where you installed Python 3.5.
Since both interpreters are named python.exe, the first one found in your PATH will be executed. In practical terms this means, whatever is in your PATH is the default Python for your system. To execute the other version, you need to point to it explicitly.
If you have Python 2.7 in E:\Python2.7 and Python 3.5 in C:\Program Files\Python 3.5, pick the one you want to be the default and add the path to it in your PATH environment variable - you can always refer to the other installation by typing the full path to the python.exe file.
C:\>python.exe # this will launch whatever is found first in your `PATH`
C:\>E:\Python2.7\python.exe # explicitly launch the 2.7 version.
As far as PyCharm is concerned, it will read PATH and pick up the default interpreter, you can add the other one in your settings by browsing to its location.
Then, when creating a new project, you can pick which version you want to work with.
On Windows, Python 3.4 64bit.
Installed libsass, but unable to run it.
Probably something to do with the 32bit vs 64bit.
pip install libsass
Requirement already satisfied (use --upgrade to upgrade): libsass in c:\python34\lib\site-packages
Requirement already satisfied (use --upgrade to upgrade): six in c:\python34\lib\site-packages (from libsass)
python
Python 3.4.3 (v3.4.3:9b73f1c3e601, Feb 24 2015, 22:44:40) [MSC v.1600 64 bit (AMD64)] on win32
Type "help", "copyright", "credits" or "license" for more information.
import sass
Traceback (most recent call last):
File "", line 1, in
File "C:\Python34\lib\site-packages\sass.py", line 24, in
from _sass import OUTPUT_STYLES, compile_filename, compile_string
ImportError: DLL load failed: %1 is not a valid Win32 application.
Help!
You should just install the appropriate wheel from: https://pypi.python.org/pypi/libsass (libsass-0.8.3-cp34-none-win_amd64.whl)
I just experienced a similar error:
File "K:\Python27\lib\site-packages\sass.py", line 26, in <module>
from _sass import OUTPUT_STYLES, compile_filename, compile_string
ImportError: DLL load failed: The specified module could not be found.
After a bunch of searching, it looked like on Windows I was missing the needed C++, and again, being Windows, the simplest way to fix this was to update VisualStudio with the C++ library.
Error is gone and libsass is working great after doing this.
Python 2.7.10 (default, May 23 2015, 09:40:32) [MSC v.1500 32 bit(Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information.
>>> import sass
>>> print sass.compile(string='a { b{ color: blue; } }')
a b { color: blue; }
I know it doesn't directly answer the question, but thought I'd leave the solution I found here, for those who are in the process of losing a couple hours like I did.
I had Visual Studio 2013 - installed Visual Studio Community 2015 (making sure to select the C & C++ libraries)
The libsass DLL ("_sass.pyd" in the python world) probably misses some of its dependencies.
You can just install the small "Visual C++ Redistributable for Visual Studio 2015" to get that bunch of missing C++ components.
The title says it all. I do see similar questions, someone suggested about http://www.lfd.uci.edu/~gohlke/pythonlibs/#pygame, but all the pygame downloadable files are in .whl format which I have no idea how to run on Windows 7. I tried "cd [directory] > pip install [filename]" without success.
This worked from me (Windows 7, python 2.7, 64 bit):
pip install C:/Users/ujjwal.karn/Downloads/pygame-1.9.2a0-cp27-none-win_amd64.whl
I downloaded the file pygame-1.9.2a0-cp27-none-win_amd64.whl from http://www.lfd.uci.edu/~gohlke/pythonlibs/#pygame as well.
In general, whl files are installed with pip:
pip install whatever.whl
Open the .whl file through WinRar and just extract the contents(you will find 3 folders) into your Python folder.
For example : if you had installed python 2.7.3 in C:, then your directory to extract will be C:\Python27
You are doing right. Please just check python command it should display win64
C:>python
Python 3.4.3 (v3.4.3:9b73f1c3e601, Feb 24 2015, 22:43:06) [MSC v.1600 32 bit (In
tel)] on win64 Type "help", "copyright", "credits" or "license" for more information.
if output is win32 install pygame‑1.9.2a0‑cp34‑none‑win32.whl