I have been trying to run this simulation code in Stata version 15.1, but am having issues running it as indicated below.
local num_clus 3 6 9 18 36
local clussize 5 10 15 20 25
*Model specifications
local intercept 17.87
local timecoeff1 -5.42
local timecoeff2 -5.72
local timecoeff3 -7.03
local timecoeff4 -6.13
local timecoeff5 -9.13
local intrvcoeff 5.00
local sigma_u3 25.77
local sigma_u2 120.62
local sigma_error 38.35
local nrep 1000
local alpha 0.05
*Generate multi-level data
capture program drop swcrt
program define swcrt, rclass
version 15.1
preserve
clear
args num_clus clussize intercept intrvcoeff timecoeff1 timecoeff2 timecoeff3 timecoeff4 timecoeff5 sigma_u3 sigma_error alpha
assert `num_clus' > 0 & `clussize' > 0 & `intercept' > 0 & `intrvcoeff' > 0 & `timecoeff1' < 0 & `timecoeff2' < 0 & `timecoeff3' < 0 & `timecoeff4' < 0 & `timecoeff5' < 0 & `sigma_u3' > 0 & `sigma_error' > 0 & `alpha' > 0
/*Generate simulated multi—level data*/
qui
clear
set obs `num_clus'
qui gen cluster = _n
qui gen group = 1+mod(_n-1,4)
/*Generate cluster-level errors*/
qui gen u_3 = rnormal(0,`sigma_u3')
expand `clussize'
bysort cluster: gen individual = _n
/*Set up time*/
expand 6
bysort cluster individual: gen time = _n-1
/*Set up intervention variable*/
gen intrv = (time>=group)
/*Generate residual errors*/
qui gen error = rnormal(0,`sigma_error')
/*Generate outcome y*/
qui gen y = `intercept' + `intrvcoeff'*intrv + `timecoeff1'*1.time + `timecoeff2'*2.time + `timecoeff3'*3.time + `timecoeff4'*4.time + `timecoeff5'*5.time + u_3 + error
/*Fit multi-level model to simulated dataset*/
mixed y intrv i.time ||cluster:, covariance(unstructured) reml dfmethod(kroger)
/*Return estimated effect size, bias, p-value, and significance dichotomy*/
tempname M
matrix `M' = r(table)
return scalar bias = _b[intrv] - `intrvcoeff'
return scalar p = `M'[1,4]
return scalar p_= (`M'[1,4] < `alpha')
exit
end swcrt
*Postfile to store results
tempname step
tempfile powerresults
capture postutil clear
postfile `step' num_clus [B]clussize[/B] intrvcoeff p p_ bias using `powerresults', replace
ERROR: (note: file /var/folders/v4/j5kzzhc52q9fvh6w9pcx9fgm0000gn/T//S_00310.00000c not found)
*Loop over number of clusters
foreach c of local num_clus{
display as text "Number of clusters" as result "`c'"
foreach s of local clussize{
display as text "Cluster size" as result "`s'"
forvalue i = 1/`nrep'{
display as text "Iterations" as result `nrep'
quietly swcrt `num_clus' `clussize' `intercept' `intrvcoeff' `timecoeff1' `timecoeff2' `timecoeff3' `timecoeff4' `timecoeff5' `sigma_u3' `sigma_error' `alpha'
post `step' (`c') (`s') (`intrvcoeff') (`r(p)') (`r(p_)') (`r(bias)')
}
}
}
postclose `step'
ERROR:
Number of clusters3
Cluster size5
Iterations1000
r(9);
*Open results, calculate power
use `powerresults', clear
levelsof num_clus, local(num_clus)
levelsof clussize, local(clussize)
matrix drop _all
*Loop over combinations of clusters
*Add power results to matrix
foreach c of local num_clus{
foreach s of local clussize{
quietly ci proportions p_ if num_clus == `c' & clussize = `s'
local power `r(proportion)'
local power_lb `r(lb)'
local power_ub `r(ub)'
quietly ci mean bias if num_clus == `c' & clussize = `s'
local bias `r(mean)'
matrix M = nullmat(M) \ (`c', `s', `intrvcoeff', `power', `power_lb', `power_ub', `bias')
}
}
*Display the matrix
matrix colnames M = c s intrvcoeff power power_lb power_ub bias
ERROR:
matrix M not found
r(111);
matrix list M, noheader format(%3.2f)
ERROR:
matrix M not found
r(111);
There are a few things that seem to be amiss above.
I get a message after the postfile command saying that the file is not found. Nowhere in my code do I actually use that name so it seems to be generated by Stata.
After the loop and the post command I get error r(9).
Error message r(111) - says that the matrix is not found.
I have checked the following parts of the code to try and resolve the issue:
Specified local macros outside of the program and passed into it via the args statement of the program
Match between the variables in the call of the swcrt with the args statement in the program
Match between arguments in assert statement of the program with args command and whether the alligator clips are specified appropriately
Match b/w the number of variables in the post and postfile commands
I am not quite sure why I get these errors considering that the code did work previously and the program iterated (even when I take away the changes there is still the error). Does anyone know why this happens? If I had to guess, the matrix can't be found because of the error with the file not being found when I use postfile.
Related
I am using two-level loops to create a set of variables. But Stata reports a syntax error.
forvalues i = 1/5 {
local to `i'+1
dis `to'
forvalues j = `to'/6{
dis `j'
gen e_`i'_`j' = .
}
}
I could not figure out where I made the syntax error.
And a follow-up question. I would like to change how the number of loops are coded in the example above. Right now, it's hard-coded as 5 and 6. But I want to make it based on the data. For instance,I am coding as below:
sum x
scalar x_max_1 = `r(max)'-1
scalar x_max_2 = `r(max)'
forvalues i = 1/x_max_1 {
local to = `i'+1
dis `to'
forvalues j = `to'/x_max_2{
dis `j'
gen e_`i'_`j' = .
}
}
However, Stata reports a syntax error in this case. I am not sure why. The scalar is a numeric variable. Why would the code above not work?
Your code would be better as
forvalues i = 1/5 {
local to = `i' + 1
forvalues j = `to'/6 {
gen e_`i'_`j' = .
}
}
With your code you went
local to `i' + 1
so first time around the loop to becomes the string or text 1 + 1 which is then illegal as an argument to forvalues. That is, a local definition without an = sign will result in copying of text, not evaluation of the expression.
The way you used display could not show you this error because display used that way will evaluate expressions to the extent possible. If you had insisted that the macro was a string with
di "`to'"
then you would have seen its contents.
Another way to do it is
forvalues i = 1/5 {
forvalues j = `= `i' + 1'/6 {
gen e_`i'_`j' = .
}
}
EDIT
You asked further about
sum x
scalar x_max_1 = `r(max)'-1
scalar x_max_2 = `r(max)'
forvalues i = 1/x_max_1 {
and quite a lot can be said about that. Let's work backwards from one of various better solutions:
sum x, meanonly
forvalues i = 1/`= r(max) - 1' {
or another, perhaps a little more transparent:
sum x, meanonly
local max = r(max) - 1
forvalues i = 1/`max' {
What are the messages here:
If you only want the maximum, specify meanonly. Agreed: the option name alone does not imply this. See https://www.stata-journal.com/sjpdf.html?articlenum=st0135 for more.
What is the point of pushing the r-class result r(max) into a scalar? You already have what you need in r(max). Educate yourself out of this with the following analogy.
I have what I want. Now I put it into a box. Now I take it out of the box. Now I have what I want again. Come to think of it, the box business can be cut.
The box is the scalar, two scalars in this case.
forvalues won't evaluate scalars to give you the number you want. That will happen in many languages, but not here.
More subtly, forvalues doesn't even evaluate local references or similar constructs. What happens is that Stata's generic syntax parser does that for you before what you typed is passed to forvalues.
I have a dataset with multiple subgroups (variable economist) and dates (variable temps99).
I want to run a tabsplit command that does not accept bysort or by prefixes. So I created a macro to apply my tabsplit command to each of my subgroups within my data.
For example:
levelsof economist, local(liste)
foreach gars of local liste {
display "`gars'"
tabsplit SubjectCategory if economist=="`gars'", p(;) sort
return list
replace nbcateco = r(r) if economist == "`gars'"
}
For each subgroup, Stata runs the tabsplit command and I use the variable nbcateco to store count results.
I did the same for the date so I can have the evolution of r(r) over time:
levelsof temps99, local(liste23)
foreach time of local liste23 {
display "`time'"
tabsplit SubjectCategory if temps99 == "`time'", p(;) sort
return list
replace nbcattime = r(r) if temps99 == "`time'"
}
Now I want to do it on each subgroups economist by date temps99. I tried multiple combination but I am not very good with macros (yet?).
What I want is to be able to have my r(r) for each of my subgroups over time.
Here's a solution that shows how to calculate the number of distinct publication categories within each by-group. This uses runby (from SSC). runby loops over each by-group, each time replacing the data in memory with the data from the current by-group. For each by-group, the commands contained in the user's program are executed. Whatever is left in memory when the user's program terminates is considered results and accumulates. Once all the groups have been processed, these results replace the data in memory.
I used the verbose option because I wanted to present the results for each by-group using nice formatting. The derivation of the list of distinct categories is done by splitting each list, converting to a long layout, and reducing to one observation per distinct value. The distinct_categories program generates one variable that contains the final count of distinct categories for the by-group.
* create a demontration dataset
* ------------------------------------------------------------------------------
clear all
set seed 12345
* Example generated by -dataex-. To install: ssc install dataex
clear
input str19 economist
"Carmen M. Reinhart"
"Janet Currie"
"Asli Demirguc-Kunt"
"Esther Duflo"
"Marianne Bertrand"
"Claudia Goldin"
"Bronwyn Hughes Hall"
"Serena Ng"
"Anne Case"
"Valerie Ann Ramey"
end
expand 20
bysort economist: gen temps99 = 1998 + _n
gen pubs = runiformint(1,10)
expand pubs
sort economist temps99
gen pubid = _n
local nep NEP-AGR NEP-CBA NEP-COM NEP-DEV NEP-DGE NEP-ECM NEP-EEC NEP-ENE ///
NEP-ENV NEP-HIS NEP-INO NEP-INT NEP-LAB NEP-MAC NEP-MIC NEP-MON ///
NEP-PBE NEP-TRA NEP-URE
gen SubjectCategory = ""
forvalues i=1/19 {
replace SubjectCategory = SubjectCategory + " " + word("`nep'",`i') ///
if runiform() < .1
}
replace SubjectCategory = subinstr(trim(SubjectCategory)," ",";",.)
leftalign // from SSC
* ------------------------------------------------------------------------------
program distinct_categories
dis _n _n _dup(80) "-"
dis as txt "fille = " as res economist[1] as txt _col(68) " temps = " as res temps99[1]
// if there are no subjects for the group, exit now to avoid a no obs error
qui count if !mi(trim(SubjectCategory))
if r(N) == 0 exit
// split categories, reshape to a long layout, and reduce to unique values
preserve
keep pubid SubjectCategory
quietly {
split SubjectCategory, parse(;) gen(cat)
reshape long cat, i(pubid)
bysort cat: keep if _n == 1
drop if mi(cat)
}
// show results and generate the wanted variable
list cat
local distinct = _N
dis _n as txt "distinct = " as res `distinct'
restore
gen wanted = `distinct'
end
runby distinct_categories, by(economist temps99) verbose
This is an example of the XY problem, I think. See http://xyproblem.info/
tabsplit is a command in the package tab_chi from SSC. I have no negative feelings about it, as I wrote it, but it seems quite unnecessary here.
You want to count categories in a string variable: semi-colons are your separators. So count semi-colons and add 1.
local SC SubjectCategory
gen NCategory = 1 + length(`SC') - length(subinstr(`SC', ";", "", .))
Then (e.g.) table or tabstat will let you explore further by groups of interest.
To see the counting idea, consider 3 categories with 2 semi-colons.
. display length("frog;toad;newt")
14
. display length(subinstr("frog;toad;newt", ";", "", .))
12
If we replace each semi-colon with an empty string, the change in length is the number of semi-colons deleted. Note that we don't have to change the variable to do this. Then add 1. See also this paper.
That said, a way to extend your approach might be
egen class = group(economist temps99), label
su class, meanonly
local nclass = r(N)
gen result = .
forval i = 1/`nclass' {
di "`: label (class) `i''"
tabsplit SubjectCategory if class == `i', p(;) sort
return list
replace result = r(r) if class == `i'
}
Using statsby would be even better. See also this FAQ.
I am attempting to reproduce the following in stata. This is a scatter plot of average portfolio returns (y axis) and predicted retruns (x axis).
To do so, I need your help on how I can extract the intercepts from 25 regressions into one variable? I am currently running the 25 portfolio regressions as follows. I have seen that parmest can potentially do this but can't get it to work with the forval. Many thanks
forval s = 1 / 5 {
forval h = 1 / 5 {
reg S`s'H`h' Mkt_Rf SMB HML
}
}
I don't know what your data look like, but maybe something like this will work:
gen intercepts = .
local i = 1
forval s = 1 / 5 {
forval h = 1 / 5 {
reg S`s'H`h' Mkt_Rf SMB HML
// assign the ith observation of intercepts
// equal to the regression constant
replace intercepts = _b[_cons] if _n == `i'
// increment i
local ++i
}
}
The postfile series of commands can be very helpful in a situation like this. The commands allows you to store results in a separate data set without losing the data in memory.
You can start with this as a simple example. This code will produce a Stata data set called "results.dta" with the variables s h and constant with a record of each regression.
cap postclose results
postfile results s h constant using results.dta, replace
forval s = 1 / 5 {
forval h = 1 / 5 {
reg S`s'H`h' Mkt_Rf SMB HML
loc c = _b[_cons]
post results (`s') (`h') (`c')
}
}
postclose results
use results, clear
I have a large data set. I have to subset the data set (Big_data) by using values stored in other dta file (Criteria_data). I will show you the problem first:
**Big_data** **Criteria_data**
==================== ================================================
lon lat 4_digit_id minlon maxlon minlat maxlat
-76.22 44.27 0765 -78.44 -77.22 34.324 35.011
-67.55 33.19 6161 -66.11 -65.93 40.32 41.88
....... ........
(over 1 million obs) (271 observations)
==================== ================================================
I have to subset the bid data as follows:
use Big_data
preserve
keep if (-78.44<lon<-77.22) & (34.324<lat<35.011)
save data_0765, replace
restore
preserve
keep if (-66.11<lon<-65.93) & (40.32<lat<41.88)
save data_6161, replace
restore
....
(1) What should be the efficient programming for the subsetting in Stata? (2) Are the inequality expressions correctly written?
1) Subsetting data
With 400,000 observations in the main file and 300 in the reference file, it takes about 1.5 minutes. I can't test this with double the observations in the main file because the lack of RAM takes my computer to a crawl.
The strategy involves creating as many variables as needed to hold the reference latitudes and longitudes (271*4 = 1084 in the OP's case; Stata IC and up can handle this. See help limits). This requires some reshaping and appending. Then we check for those observations of the big data file that meet the conditions.
clear all
set more off
*----- create example databases -----
tempfile bigdata reference
input ///
lon lat
-76.22 44.27
-66.0 40.85 // meets conditions
-77.10 34.8 // meets conditions
-66.00 42.0
end
expand 100000
save "`bigdata'"
*list
clear all
input ///
str4 id minlon maxlon minlat maxlat
"0765" -78.44 -75.22 34.324 35.011
"6161" -66.11 -65.93 40.32 41.88
end
drop id
expand 150
gen id = _n
save "`reference'"
*list
*----- reshape original reference file -----
use "`reference'", clear
tempfile reference2
destring id, replace
levelsof id, local(lev)
gen i = 1
reshape wide minlon maxlon minlat maxlat, i(i) j(id)
gen lat = .
gen lon = .
save "`reference2'"
*----- create working database -----
use "`bigdata'"
timer on 1
quietly {
forvalues num = 1/300 {
gen minlon`num' = .
gen maxlon`num' = .
gen minlat`num' = .
gen maxlat`num' = .
}
}
timer off 1
timer on 2
append using "`reference2'"
drop i
timer off 2
*----- flag observations for which conditions are met -----
timer on 3
gen byte flag = 0
foreach le of local lev {
quietly replace flag = 1 if inrange(lon, minlon`le'[_N], maxlon`le'[_N]) & inrange(lat, minlat`le'[_N], maxlat`le'[_N])
}
timer off 3
*keep if flag
*keep lon lat
*list
timer list
The inrange() function implies that the minimums and maximums must be adjusted beforehand to satisfy the OP's strict inequalities (the function tests <=, >=).
Probably some expansion using expand, use of correlatives and by (so data is in long form) could speed things up. It's not totally clear for me right now. I'm sure there are better ways in plain Stata mode. Mata may be even better.
(joinby was also tested but again RAM was a problem.)
Edit
Doing computations in chunks rather than for the complete database, significantly improves the RAM issue. Using a main file with 1.2 million observations and a reference file with 300 observations, the following code does all the work in about 1.5 minutes:
set more off
*----- create example big data -----
clear all
set obs 1200000
set seed 13056
gen lat = runiform()*100
gen lon = runiform()*100
local sizebd `=_N' // to be used in computations
tempfile bigdata
save "`bigdata'"
*----- create example reference data -----
clear all
set obs 300
set seed 97532
gen minlat = runiform()*100
gen maxlat = minlat + runiform()*5
gen minlon = runiform()*100
gen maxlon = minlon + runiform()*5
gen id = _n
tempfile reference
save "`reference'"
*----- reshape original reference file -----
use "`reference'", clear
destring id, replace
levelsof id, local(lev)
gen i = 1
reshape wide minlon maxlon minlat maxlat, i(i) j(id)
drop i
tempfile reference2
save "`reference2'"
*----- create file to save results -----
tempfile results
clear all
set obs 0
gen lon = .
gen lat = .
save "`results'"
*----- start computations -----
clear all
* local that controls # of observations in intermediate files
local step = 5000 // can't be larger than sizedb
timer clear
timer on 99
forvalues en = `step'(`step')`sizebd' {
* load observations and join with references
timer on 1
local start = `en' - (`step' - 1)
use in `start'/`en' using "`bigdata'", clear
timer off 1
timer on 2
append using "`reference2'"
timer off 2
* flag observations that meet conditions
timer on 3
gen byte flag = 0
foreach le of local lev {
quietly replace flag = 1 if inrange(lon, minlon`le'[_N], maxlon`le'[_N]) & inrange(lat, minlat`le'[_N], maxlat`le'[_N])
}
timer off 3
* append to result database
timer on 4
quietly {
keep if flag
keep lon lat
append using "`results'"
save "`results'", replace
}
timer off 4
}
timer off 99
timer list
display "total time is " `r(t99)'/60 " minutes"
use "`results'"
browse
2) Inequalities
You ask if your inequalities are correct. They are in fact legal, meaning that Stata will not complain, but the result is probably unexpected.
The following result may seem surprising:
. display (66.11 < 100 < 67.93)
1
How is it the case that the expression evaluates to true (i.e. 1) ? Stata first evaluates 66.11 < 100 which is true, and then sees 1 < 67.93 which is also true, of course.
The intended expression was (and Stata will now do what you want):
. display (66.11 < 100) & (100 < 67.93)
0
You can also rely on the function inrange().
The following example is consistent with the previous explanation:
. display (66.11 < 100 < 0)
0
Stata sees 66.11 < 100 which is true (i.e. 1) and follows up with 1 < 0, which is false (i.e. 0).
This uses Roberto's data setup:
clear all
set obs 1200000
set seed 13056
gen lat = runiform()*100
gen lon = runiform()*100
local sizebd `=_N' // to be used in computations
tempfile bigdata
save "`bigdata'"
*----- create example reference data -----
clear all
set obs 300
set seed 97532
gen minlat = runiform()*100
gen maxlat = minlat + runiform()*5
gen minlon = runiform()*100
gen maxlon = minlon + runiform()*5
gen id = _n
tempfile reference
save "`reference'"
timer on 1
levelsof id, local(id_list)
foreach id of local id_list {
sum minlat if id==`id', meanonly
local minlat = r(min)
sum maxlat if id==`id', meanonly
local maxlat = r(max)
sum minlon if id==`id', meanonly
local minlon = r(min)
sum maxlon if id==`id', meanonly
local maxlon = r(max)
preserve
use if (inrange(lon,`minlon',`maxlon') & inrange(lat,`minlat',`maxlat')) using "`bigdata'", clear
qui save data_`id', replace
restore
}
timer off 1
I would try to avoid preserveing and restoreing the "big" file, and doing so is possible, but at the expense of losing Stata format.
Using the same set up as Roberto and Dimitriy did,
set more off
use `bigdata', clear
merge 1:1 _n using `reference'
* check for data consistency:
* minlat, maxlat, minlon, maxlon are either all defined or all missing
assert inlist( mi(minlat) + mi(maxlat) + mi(minlon) + mi(maxlon), 0, 4)
* this will come handy later
gen byte touse = 0
* set up and cycle over the reference data
count if !missing(minlat)
forvalues n=1/`=r(N)' {
replace touse = inrange(lat,minlat[`n'],maxlat[`n']) & inrange(lon,minlon[`n'],maxlon[`n'])
local thisid = id[`n']
outfile lat lon if touse using data_`thisid'.csv, replace comma
}
Time it on your machine. You could avoid touse and thisid and only have the single outfile within the cycle, but it would be less readable.
You can then infile lat lon using data_###.csv, clear later. If you really need the Stata files proper, you can convert that swarm of CSV files with
clear
local allcsv : dir . files "*.csv"
foreach f of local allcsv {
* change the filename
local dtaname = subinstr(`"`f'"',".csv",".dta",.)
infile lat lon using `"`f'"', clear
if _N>0 save `"`dtaname'"', replace
}
Time it, too. I protected the save as some of the simulated data sets were empty. I think this was faster than 1.5 min on my machine, including the conversion.
Is the modified version of kappa proposed by Conger (1980) available in Stata? Tried to google it to no avail.
This is an old question, but in case anyone is still looking--the SSC package kappaetc now calculates that, along with every other inter-rater statistic you could ever want.
Since no one has responded with a Stata solution, I developed some code to calculate Conger's kappa using the formulas provided in Gwet, K. L. (2012). Handbook of Inter-Rater Reliability (3rd ed.), Gaithersburg, MD: Advanced Analytics, LLC. See especially pp. 34-35.
My code is undoubtedly not as efficient as others could write, and I would welcome any improvements to the code or to the program format that others wish to make.
cap prog drop congerkappa
prog def congerkappa
* This program has only been tested with Stata 11.2, 12.1, and 13.0.
preserve
* Number of judges
scalar judgesnum = _N
* Subject IDs
quietly ds
local vlist `r(varlist)'
local removeit = word("`vlist'",1)
local targets: list vlist - removeit
* Sums of ratings by each judge
egen judgesum = rowtotal(`targets')
* Sum of each target's ratings
foreach i in `targets' {
quietly summarize `i', meanonly
scalar mean`i' = r(mean)
}
* % each target rating of all target ratings
foreach i in `targets' {
gen `i'2 = `i'/judgesum
}
* Variance of each target's % ratings
foreach i in `targets' {
quietly summarize `i'2
scalar s2`i'2 = r(Var)
}
* Mean variance of each target's % ratings
foreach i in `targets' {
quietly summarize `i'2, meanonly
scalar mean`i'2 = r(mean)
}
* Square of mean of each target's % ratings
foreach i in `targets' {
scalar mean`i'2sq = mean`i'2^2
}
* Sum of variances of each target's % ratings
scalar sumvar = 0
foreach i in `targets' {
scalar sumvar = sumvar + s2`i'2
}
* Sum of means of each target's % ratings
scalar summeans = 0
foreach i in `targets' {
scalar summeans = summeans + mean`i'2
}
* Sum of meansquares of each target's % ratings
scalar summeansqs = 0
foreach i in `targets' {
scalar summeansqs = summeansqs + mean`i'2sq
}
* Conger's kappa
scalar conkappa = summeansqs -(sumvar/judgesnum)
di _n "Conger's kappa = " conkappa
restore
end
The data structure required by the program is shown below. The variable names are not fixed, but the judge/rater variable must be in the first position in the data set. The data set should not include any variables other than the judge/rater and targets/ratings.
Judge S1 S2 S3 S4 S5 S6
Rater1 2 4 2 1 1 4
Rater2 2 3 2 2 2 3
Rater3 2 5 3 3 3 5
Rater4 3 3 2 3 2 3
If you would like to run this against a test data set, you can use the judges data set from StataCorp and reshape it as shown.
use http://www.stata-press.com/data/r12/judges.dta, clear
sort judge
list, sepby(judge)
reshape wide rating, i(judge) j(target)
rename rating* S*
list, noobs
* Run congerkappa program on demo data set in memory
congerkappa
I have run only a single validation test of this code against the data in Table 2.16 in Gwet (p. 35) and have replicated the Conger's kappa = .23343 as calculated by Gwet on p. 34. Please test this code on other data with known Conger's kappas before relying on it.
I don't know if Conger's kappa for multiple raters is available in Stata, but it is available in R via the irr package, using the kappam.fleiss function and specifying the exact option. For information on the irr package in R, see http://cran.r-project.org/web/packages/irr/irr.pdf#page.12 .
After installing and loading the irr package in R, you can view a demo data set and Conger's kappa calculation using the following code.
data(diagnoses)
print(diagnoses)
kappam.fleiss(diagnoses, exact=TRUE)
I hope someone else here can help with a Stata solution, as you requested, but this may at least provide a solution if you can't find it in Stata.
In response to Dimitriy's comment below, I believe Stata's native kappa command applies either to two unique raters or to more than two non-unique raters.
The original poster may also want to consider the icc command in Stata, which allows for multiple unique raters.