I run gradle to build an android .aar and it reports that it can't find a file, but the file definitely is there.
$ ./gradlew.bat assembleRelease
> Task :webrtc-native:externalNativeBuildRelease FAILED
Build mrwebrtc arm64-v8a
ninja: error: 'C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp', needed by 'CMakeFiles/mrwebrtc.dir/C_/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp.o', missing and no known rule to make it
FAILURE: Build failed with an exception.
* What went wrong:
Execution failed for task ':webrtc-native:externalNativeBuildRelease'.
> Build command failed.
Error while executing process C:\Users\User\AppData\Local\Android\Sdk\cmake\3.10.2.4988404\bin\cmake.exe with arguments {--build C:\Developer\Microsoft-MRWebRTC\tools\build\android\webrtc-native\.externalNativeBuild\cmake\release\arm64-v8a --target mrwebrtc}
ninja: error: 'C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp', needed by 'CMakeFiles/mrwebrtc.dir/C_/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp.o', missing and no known rule to make it
But the file C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/data_channel_interop.cpp is definitely there.
$ cd C:/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop/
User MSYS /c/Developer/Microsoft-MRWebRTC/libs/mrwebrtc/src/interop (master)
$ ls
data_channel_interop.cpp global_factory.cpp interop_api.cpp local_video_track_interop.cpp remote_audio_track_interop.cpp transceiver_interop.cpp
external_video_track_source_interop.cpp global_factory.h local_audio_track_interop.cpp peer_connection_interop.cpp remote_video_track_interop.cpp
Could anyone help? I am kind of running out of ideas on this.
I discovered it was because I had 'caseSensitive' flags enabled on some of my directories. Be careful, this is a new feature of WSL2 and there are some peculiarities where you may be enabled in without realizing. Windows cmake cannot traverse directories that have this flag enabled on them.
Read about it here:
https://devblogs.microsoft.com/commandline/per-directory-case-sensitivity-and-wsl/
Related
I have a C++ project setup with CMake, running on Mac. Recently I am looking into adding Fortify to do auto code analyzation. I am using Fortify version 22.1.
After set up the CMake and shell scripts, I found that if I compile with more than one CPU (using -j), the compiler (c++ or g++) will have issues generating the libs. Sometimes it will pass and successfully generate the Fortify output, but others it will just error out. Multi CPUs compile fine for this project without running Fortify.
I also see this error when I compile with Fortify (no matter it success or not):
[error]: Translator execution failed. Please consult the Troubleshooting section of the User Manual.
Translator returned status 1:
error: unable to handle compilation, expected exactly one compiler job in ''
This error always happens after a "Linking CXX xxxxx xxxx". I can't find any documentation about them.
Does anyone know how to solve this? Thank you.
Update more details about my setup:
I use shell files to wrap the sourceanalyzer like this:
#!/bin/bash
exec sourceanalyzer -b MyApp /Library/Developer/CommandLineTools/usr/bin/c++ "$#"
And my CMake setup like this:
if (${ENABLE_FORTIFY} EQUAL 1)
set(CMAKE_CC_COMPILER ${AVSxAppDALDefaultImplementation_SOURCE_DIR}/scripts/fortify-build-cc.sh)
set(CMAKE_CXX_COMPILER ${AVSxAppDALDefaultImplementation_SOURCE_DIR}/scripts/fortify-build-cxx.sh)
endif()
My shell script to run CMake and then to the scan:
cmake $PACKAGEPATH \
...
-DENABLE_FORTIFY="${ENABLE_FORTIFY}"
echo "---BUILDING---"
make release
if [[ $ENABLE_FORTIFY == 1 ]]; then
echo "---RUNNING FORTIFY SCAN---"
sourceanalyzer -b ${CURRENT_PROJECT_NAME} -scan -f fortify_scan_result_${CURRENT_PROJECT_NAME}.txt
fi
I have not yet been able to successfully build skia from source code on Windows 10. I am going in circles at this point.
I followed the official instructions here https://skia.org/user/build but always get errors.
gn args are:
is_official_build=true
is_component_build = false
win_vc="C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\VC"
skia_use_libpng=false
skia_use_icu=false
skia_use_zlib=false
skia_use_libwebp=false
skia_enable_pdf=false
skia_use_libjpeg_turbo=false
skia_use_expat=false
I get the following error:
C:\Development\skia\bin>ninja -C out/Static
ninja: Entering directory `out/Static'
[13/2662] copy ../../../third_party/externals/icu/common/icudtl.dat icudtl.dat
FAILED: icudtl.dat
python C:/Development/skia/gn/cp.py ../../../third_party/externals/icu/common/icudtl.dat icudtl.dat
CreateProcess failed: The system cannot find the file specified.
ninja: fatal: ReadFile: The handle is invalid.
Any thoughts would be appreciated.
By the way, first attempt at:
using gn or ninja to build anything
using Chromium's depot_tools
So, I am not ruling out any user error on my part :(
I am trying to compile an existing qt application's code using mingw compiler.
During compilation I am getting an error "*** internal error: unable to open jobserver semaphore '3,4': (Error 2: The system cannot find the file specified. ). Stop".
My current project is a makefile based project. Here I have one make file (parent.mk) that compiles all primary modules and then
parent.mk
compilation steps
.
.
.
make $QT_CODE_DIR
Here in this QT code directory I have another makefile (child.mk) which has following content:
child.mk
cd "qtcode_compilation_out_dir"
qmake.exe "product.pro" -r -spec win32-g++
CONFIG+=release
mingw32-make -w
If I try to run the make command manually for QT code then it works fine.
#Alexander: Thanks for the suggestion.
Please suggest if anyone has any idea about it.
Thanks.
Finally, I found out the exact reason of the problem and solution as well.
Reason for failure:
The compilation command that I am using is "make" which is been aliased to "make -j2"and along with "mingw32-make -w" it was producing the error because mingw32-make is an obsolete make command and it doesn't support multi threaded compilation.
Solution:
I just replaced the mingw32-make with make.
Good afternoon. Tell me who build Chromium om Windows. It is required to brand Chromium (start page, bookmarks, tray icons, name), collect according to the instructions at the site chromium. When assembling through VS 2015, the following error list appears. The assembly takes place on the server, 64 GB RAM, Intel Xeon.
The compilation goes to 60-70%, after which VS crashes, restarts and gives an error: "The following files can not be found - all.sln - so they will not be loaded" - after this error the assembly stops, I tried 10 times already.
Ninja: build stopped: subcommand failed. Warning: premature end of file; Recovering
FAILED: obj / third_party / yasm / yasm_utils / xmalloc.obj
First, try running the build from command line:
ninja -C src/out/Default
If it still fails, make sure you carefully followed prerequisites installation instructions. Specifically, try gclient sync -f and make sure it finished normally before building.
When I'm compiling ism project to create MSI, its still creates the MSI even though I have build errors.
The reason I need it NOT to be created is for build verification.
Instead of checking the build log for errors, I will just check the existence of the MSI.
Does anybody know how can I achieve that?
EDIT:
I'm using ISCmdBld tool to build MSIs. This is the command line I'm running to build where the environment variables are being set before running this command:
IsCmdBld -p "%FULL_PROJECT_FILENAME%" -a %BUILDMODE% -r %PRODUCT% -o "%MMSEARCHPATH%" | tee /A "%FULL_PROJECT_LOG_FILENAME%"
If you are compiling using IsCmdBld.exe, you should add the -x option, so that the build is stopped if an error occurs.
You also can use it combined with -w, which makes each warning becomes considered as an error (and thus, each warning encountered also stops the build).
More information about IsCmdBld.exe : http://helpnet.installshield.com/installshield16helplib/ISCmdBldParam.htm
I hope this helps.
Your build automation should check the exit code from ISCmdBld.exe. If the exit code is a failure, don't archive the output.