The else statement keeps flagging as invalid syntax, in the Visual Studio 2019 IDE and when running the .py file outside the IDE. I keep seeing invalid token for else: However looking through the python docs this appears to be correct. I am working on building out a system reboot script to push through a MDM solution. This is just the very basic start of the script.
import os
import time
import datetime
WorkStatus = input ("We are going to restart this computer now, did you save your work? Y or N")
if workStatus == n: print ('Save your work now restart will occur in 5 minutes')
# wait 5 minutes
print ("rebooting in 5 minutes")
time.sleep(300)
else:
os.system ("Shutdown /r /t 10")
import os
import time
import datetime
WorkStatus = input ("We are going to restart this computer now, did you save your work? Y or N")
if workStatus == n:
print ('Save your work now restart will occur in 5 minutes')
# wait 5 minutes
print ("rebooting in 5 minutes")
time.sleep(300)
else:
os.system ("Shutdown /r /t 10")
Related
I am having a raspberry pi 4 (RPI) with python 2.7 installed. Within a python script, I am executing a shell script, which flashes a µController (µC) connected to the pi. The shell script prints some stuff and reaches idle after printing "Connecting". Note that the script does not finish at this point!
Now I want to use subprocess (or any other function) to forward me all the prints from the shell script. I do then want to check if the keyphrase "Connecting" has been printed. Besides, I need a timeout if the shell script gets stuck before printing "Connecting".
However, I am quite new to python, thus I dont know how to use the subprocess correctly to be able to retrieve the prints from the shell script and set a timeout for the script as well.
Here is some sort of pseudo code:
output = subprocess.Popen(["./prebuilt/bin/bbb_cc13xx-sbl /dev/ttyACM0 {hexfileName} cc13x2 -e -p -v"], \
stdout=subprocess.PIPE, stderr = subprocess.PIPE, shell = True)
expression_found = False
for i in range(5)
if(output.stdout.find('Expression') != -1):
expression_found = True
break
time.sleep(1)
if(expression_found):
do that..
else:
do this...
Is there an easy way to implement my two needs?
EDIT: Adding the prints to the terminal like os.system() does would be great, too.
Best wishes
Slev1n
I actually found a simple solution, the mistake is to pipe stderr instead of stdout. The first one being empty all/most of the time.
Here is a solution where the prints from the child process where displayed on the terminal in real time and where I was able to search for a keyword within the stdout pipe. I was also able to terminate the child process without errors. I could also add a timeout as well for terminating the child process. The codes was also validated on raspberry pi 4B with python 2.7.
Here the main process:
import subprocess, sys
import time
cmd = "contprint.py"
p = subprocess.Popen( cmd , shell=True,
stdout=subprocess.PIPE,
universal_newlines=True)
startTime = time.time()
maxTime = 8
while True:
currentTime = time.time()
if (currentTime - startTime) > maxTime:
p.terminate()
break
else:
output = p.stdout.readline()
print(output)
keyWord = "EOF"
if keyWord in output:
print("Keyword {} has be found".format(keyWord))
p.terminate()
break
if len(output) == 0:
print("Output is empty")
p.terminate()
break
if p.poll() is not None:
print("p.poll is not none")
p.terminate()
break
And here the child process:
import time, sys
count = 0
while(1):
count += 1
print(count)
try:
sys.stdout.flush()
except:
print("Escape Error!")
time.sleep(0.5)
if(count == 10):
print("EOF")
if(count == 20):
pass`enter code here`
Any comments are welcome.
I work with python 2.7 and I have a python script that ssh to remote servers and it works fine using python command from cmd but when I convert this script to executable file using py2exe or cx_freeze or Pyinstaller and try to run it, the window open and close immediately like if the program crashes. I tried another simple scripts like print function or some math function the executable files work fine so any one could help what would be the reason?
Thanks
Here is my code:
import sys
import paramiko
import getpass
def print_menu():
print 30 * "-", "MENU", 30 * "-"
print "1. LAB1"
print "2. LAB2"
print "3. LAB3"
print "4. Exit"
print 67 * "-"
def ssh_command(ssh):
while True:
command = raw_input("Enter command or q :")
ssh.invoke_shell()
stdin, stdout, stderr = ssh.exec_command(command)
stdout = stdout.readlines()
if command == "q":
break
for line in stdout:
if "Size" in line:
print "found the string"
break`enter code here`
else:
print "There was no output for this command"
def ssh_connect(host, user, password):
try:
ssh = paramiko.SSHClient()
print('Connecting...')
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
ssh.connect(hostname=host, username=user, password=password)
ssh_command(ssh)
except Exception as e:
print('Connection Failed')
print(e)
def ssh_close():
ssh = paramiko.SSHClient()
ssh.set_missing_host_key_policy(paramiko.AutoAddPolicy())
ssh.close()
def credentials(host):
user = raw_input("Username:")
password = getpass.getpass("password for " + user + ":")
ssh_connect(host, user, password)
loop = True
while loop:
print_menu()
choice = input("Enter your choice [1-3]: ")
if choice == 1:
credentials('x.x.x.x')
elif choice == 2:
credentials('x.x.x.x')
elif choice == 3:
credentials('x.x.x.x')
elif choice == 4:
loop = False
print "Closing SSH connection"
print
ssh_close()
else:
raw_input("Wrong option selection. Enter any key to try again..")
You can check the error by running the exe file in command prompt.
This will give you an upper hand.
Especially in cx_freeze you have to mention the dependencies.
I think you are facing some dependency problem.
When you specifiy --debug=all after your pyinstall command when packaging, you will see specific errors when starting your applicataion in the dist folder.
Read here https://pyinstaller.readthedocs.io/en/stable/when-things-go-wrong.html to get more information on debugging specific errors and how to fix them.
you can use the pyinstaller with -F argument to fully package the python interpreter then open windows cmd and run it
pyinstaller -F <your_script>.py
Worry not, my friend! Just add a window.mainloop() call at the end of your program. Then, everything should work properly. I was stumped by the same problem got revelation from your words:
I tried another simple scripts like print function or some math function the executable files work fine
So, I compared both programs side by side and received my answer.
Running pyinstaller with the F flag should solve the problem of immediate close after startup.
I am trying to create a translator-type program in Python (this is 2.7, if that is important). I want to receive user input, translate it, and then print their output to the screen. That part is not difficult, but I also want to export it to a text file. I am using Powershell for that, with the subprocess module. The Powershell script is very short, and all it does is asks for the user to copy and paste the Python translation into an input. It then calls New-Item to create a file and gives it the value option as the Python translation.
Python code:
def translator:
inquiry = raw_input("Leetspeak trans query: ") #Enter query
inquiry = inquiry.lower() #Change all to lowercase, so that everything gets translated
newPrint1 = "" #The new string that gets returned to them at the end
level = raw_input("What type of 1337 do you want? 1 for basic, 2 for intermediate, \
3 for intermediate-advanced, and 4 for ultimate.")
if level == "1":
from b4s1c_l33t import leetkey
elif level == "2":
from In73rm3d1473_1337 import leetkey
elif level == "3":
from In7_4DV import leetkey
from In7_4DV import combokey
elif level == "4":
from U17IM473_1337 import leetkey
from U17IM473_1337 import combokey
for char in inquiry:
if char in leetkey:
newPrint1 += leetkey[char]
else:
newPrint1 += char #Checks to see if the char is in the single-char list, then appends it accordingly
if int(level) >= 3:
for item in combokey:
if item in newPrint1:
newPrint1 = newPrint1.replace(item, combokey[item])
print newPrint1 #Print answer
question = raw_input(r"Do you want to translate some more? Type Y or N ") #Asks if they want to do more
question = question.lower() #Changes it to lowercase, for sending through the if loop
if question == "y" or question == "Y":
translator() #If answer is yes, program calls the entire function again
elif question != "y" and question != "n" and question != "Y" and question != "N":
print "I didn't quite catch that."
ps = raw_input("Would you like to export your leetness to a file? Type Y or N ")
if ps == "Y" or ps == "y":
import subprocess
subprocess.call(["C:\\WINDOWS\\system32\\WindowsPowerShell\\v1.0\\powershell.exe", ". \"./1337Export.ps1\";", "&export"])
else:
print r"0|<. 600|)|3`/3!"
translator() #calls the function once
Powershell script:
Function export(){
$param = Read-Host("Copy-paste the translation from above here! ")
New-Item C:\Scripts\1337\1337ness.txt -type file -value $param
}
But I also know that the script was working perfectly up until I added the Powershell to it, so the problem is either in my usage of the subprocess module or in the Powershell script itself. I am a somewhat-medium-beginner at using Powershell, so any help will be greatly appreciated. Either that, or if there is a way to create the new file and write data to it in Python itself, that would be greatly appreciated.
Thanks,
Prem
Note: in the Python script, the leetkey and combokey are in separate files that are imported based on the value of the variable level.
UPDATE: I looked at the page here, and the subprocess code in the Python script is what I found in that page. It did not work, but instead threw an error saying that the export function does not exist, which it obviously does... in Powershell. Thanks again!
Your parameter construction is off. You want to run the following commandline in PowerShell:
. "./1337Export.ps1"; & export
which basically means "dot-source (IOW import) the script 1337Export.ps1 from the current working directory, then call (&) the function export".
The cleanest way to do this is to put the statement in a scriptblock:
&{. "./1337Export.ps1"; & export}
and pass that scriptblock as a single argument, so your Python statement should look like this:
subprocess.call(["C:\\WINDOWS\\system32\\WindowsPowerShell\\v1.0\\powershell.exe", '-Command', '&{. "./1337Export.ps1"; & export}'])
Of course you need to make sure that 1337Export.ps1 actually exists in the current working directory when you execute the Python script.
You have to do two things:
1) dot source the script (which is similar to python's import), and
2) subprocess.call.
import subprocess
subprocess.call(["C:\\WINDOWS\\system32\\WindowsPowerShell\\v1.0\\powershell.exe", ". \"./SamplePS\";", "&export"])
Note: I have assumed that both the .py and .ps1 are residing in the same directory and the name of the powershell script is "SamplePS" and from that script I am using the function "export"
Hope it helps
I just wrote a simple webscraping script to give me all the episode links on a particular site's page. The script was working fine, but, now it's broke. I didn't change anything.
Try this URL (For scraping ) :- http://www.crunchyroll.com/tabi-machi-late-show
Now, the script works mid-way and gives me an error stating, ' Element not found in the cache - perhaps the page has changed since it was looked up'
I looked it up on internet and people said about using the 'implicit wait' command at certain places. I did that, still no luck.
UPDATE : I tried this script in a demote desktop and it's working there without any problems.
Here's my script :-
from selenium import webdriver
from selenium.webdriver.common.keys import Keys
import os
import time
from subprocess import Popen
#------------------------------------------------
try:
Link = raw_input("Please enter your Link : ")
if not Link:
raise ValueError('Please Enter A Link To The Anime Page. This Application Will now Exit in 5 Seconds.')
except ValueError as e:
print(e)
time.sleep(5)
exit()
print 'Analyzing the Page. Hold on a minute.'
driver = webdriver.Firefox()
driver.get(Link)
assert "Crunchyroll" in driver.title
driver.implicitly_wait(5) # <-- I tried removing this lines as well. No luck.
elem = driver.find_elements_by_xpath("//*[#href]")
driver.implicitly_wait(10) # <-- I tried removing this lines as well. No luck.
text_file = open("BatchLink.txt", "w")
print 'Fetching The Links, please wait.'
for elem in elem:
x = elem.get_attribute("href")
#print x
text_file.write(x+'\n')
print 'Links have been fetched. Just doing the final cleaning now.'
text_file.close()
CleanFile = open("queue.txt", "w")
with open('BatchLink.txt') as f:
mylist = f.read().splitlines()
#print mylist
with open('BatchLink.txt', 'r') as inF:
for line in inF:
if 'episode' in line:
CleanFile.write(line)
print 'Please Check the file named queue.txt'
CleanFile.close()
os.remove('BatchLink.txt')
driver.close()
Here's a screenshot of the error (might be of some help) :
http://i.imgur.com/SaANlsg.png
Ok i didn't work with python but know the problem
you have variable that you init -> elem = driver.find_elements_by_xpath("//*[#href]")
after that you doing some things with it in loop
before you finishing the loop try to init this variable again
elem = driver.find_elements_by_xpath("//*[#href]")
The thing is that the DOM is changes and you loosing the element collection.
I'm trying to run a pygame program using pythonw to avoid having the console window show up. This causes a weird issue related to print statements.
Basically, the program will just exit after a few seconds with no error message. The more printing I do, the faster it happens.
If I run it in idle or at the command prompt (or in linux) the program works fine. This problem only happens when launched with pythonw (right-click, Open With, pythonw).
I'm using python 2.7.11 on Windows XP 32-bit. pygame 1.9.1release.
Is there a workaround for this? Why does the program simply terminate with no error?
import pygame
from pygame.locals import *
succeeded, failed = pygame.init()
display_surface = pygame.display.set_mode((320, 240))
clock = pygame.time.Clock()
terminate = False
while terminate is False:
for event in pygame.event.get():
if event.type == QUIT:
terminate = True
area = display_surface.fill((0,100,0))
pygame.display.flip()
elapsed = clock.tick(20)
print str(elapsed)*20
pygame.quit()
You don't need to remove print statements. Save them for later debugging. ;-)
Two steps to solve this problem:
Firstly, keep all the code in py file - don't change it to pyw now; Say it is actualCode.py
Then, create a new file runAs.pyw with the following lines in it
# In runAs.pyw file, we will first send stdout to StringIO so that it is not printed
import sys # access to stdout
import StringIO # StringIO implements a file like class without the need of disc
sys.stdout = StringIO.StringIO() # sends stdout to StringIO (not printed anymore)
import actualCode # or whatever the name of your file is, see further details below
Note that, just importing actualCode runs the file, so, in actualCode.py you should not enclose the code which is executed, in what I call is it main running file condition. For example,
# In actualCode.py file
....
....
....
if __name__ == '__main__': # Don't use this condition; it evaluates to false when imported
... # These lines won't be executed when this file is imported,
... # So, keep these lines outside
# Note: The file in your question, as it is, is fine