I get the following error:
Exception occurred executing command line.
Cannot run program "C:/OMNEST-5.5.1/samples/enera/lteAdvanced/enera.exe" (in directory "C:\OMNEST-5.5.1\samples\enera\lte"): CreateProcess error=2, The System cannot find the file.
I already built the project many times. I have tried to make a simplier already given example from omnet just to check if this is working. It is working. But if I copy this example in my Project it also doesn't work, so there is sth wrong with my Project file. But it seems to be correct. I just have one Connection and kept it really really simple. But it doesn't work. I have installed Omnest and inet correctly.
The most likely cause is that the EXE file cannot find the omnet++ dynamic libraries it tries the load. And the most likely reason is that you are trying to execute the executable from a CMD prompt instead of from the shell provided by the mingwenv.cmd script.
Everything you do in OMNeT++ (including starting the simulations) must be run from the mingwenv shell.
Related
I attempted to follow through on VS Code's method on making C++ code work on their editor. I did this successfully on my laptop but when I tried compiling it, I was met with the error:
* Executing task: C/C++: g++.exe build active file
Starting build...
C:\msys64\mingw64\bin\g++.exe -fdiagnostics-color=always -g "C:\Users\salty\Documents\Programming\C++ Scripts\myProgram\main.cpp" -o "C:\Users\salty\Documents\Programming\C++ Scripts\myProgram\main.exe"
'cmd' is not recognized as an internal or external command,
operable program or batch file.
Build finished with error(s).
* The terminal process failed to launch (exit code: -1).
* Terminal will be reused by tasks, press any key to close it.
This is the entire error message plus extra things in my editor.
If I try and copy and paste the command in the message into Windows Power Shell, it actually works (New .exe file appeared in the correct directory and runs without fault).
These are my environment variables for User, and these are my System variables.
I've tried uninstalling and re-installing and changing the paths around. I'm new to C++ programming and how compilers work in general, but I'm not sure why VS Studio says it doesn't recognize cmd among others it could've not recognized.
Why is it giving me this error?
Edit: I believe I didn't include a return 0; line in the program. Correcting this did not fix the issue.
I am not sure what I poked into place or if I just was too incompetent to realize something, however adding %SystemRoot%\system32 to my PSModulePath environment variables somehow fixed the issue, and since that action I have yet to replicate the compile error.
I don't know if adding that variable to my environments permanently fixed it or VS Studio needed a moment to process some things. Thanks anyways!
I created a c++ programm that works with ros. The first step would be to open a roscore in a terminal and move on from there. I do so with system("roscore &");
I compiled my file and can run it just fine with ./file.
However, I want to be able to run it as an application (double click). I created a .desktop file and the program shows up in my application list. When i start it though, all I get is a terminal that opens with the message
sh: 1: roscore: not found
etc.
The same applies for the roslaunch commands. I also fork and exec a roslaunch command, which does not work as well.
I tried system("ls"); which worked. All cout messages work as well.
Any idea what is wrong here?
roscore executable is not located in std paths (/bin:/usr/bin:). Use the absolute path - system("/path/to/roscore &")
p = subprocess.Popen([executable_file])
This is only code that I am using to run the python subprocess. However, it has unknown issue that cause my program cannot open the executable file as expected.
executable_file is one file link (PATH) that locate executable program.
Ex. C:\Users\SharkIng\Dev\WhatEverSystem\Builds\Windows\program-123456789-123456789.exe
The python subprocess.Popen should run the program. However, sometime it works and sometime it is not (I did not change any code between this two situation)
OS: Windows 10
Python: 2.7.*
Error: [Error 2] The system cannot find the file specified
BUT: It is working if you manually run subprocess.Popen([executable_file_path_string]) (with same file and path) it work.
WHY this happen?? Is that because some problem with Windows Python? or it is because my setting mess me up?
UPDATE: It is not some reason such as NOT FULL PATH. I can have it working with exact same code. If I ran same code in a python shell, by typing each line of code. It works. But if I put exact same code in a .py file and run it with python file.py, it showing the error
UPDATE 2: Another team member have same error with Windows 7 and Python 2.7.* This code used to work this morning. AGAIN I didn't change anything. That is way I am asking if it is unstable.
There is no problem with subprocess. If you want to run a specified executable, you need to give the full path to that file. The most likely reason you're seeing variable behavior is that sometimes you're in the directory with the .exe, and other times you're not.
I am getting an error:
"Error occurred during initialization of VM
Unable to load native library: Can't find dependent libraries"
The error arises when I try to execute my exe file.
I have created exe file through pyinstaller on a django application. Application uses pylucine library. I think it may be the issue of error.
How to fix the error?
Since I can't be certain given you've provided very few details here is a shot in the dark to help solve your problem:
First, try removing the jvm.dll file that gets packaged with the pyinstaller -D youmodule.py command (for now work with the directory command rather than -F option). The reason why is here.
With that jvm.dll file gone, you should start seeing the actual error code - and with that the java class or dependency that isn't being loaded.
If it's a java class that isn't being properly loaded then you know instantly it must not be correcly represented in the classpath environment variable and you should do everything in your power to make sure it is:
e.g.: os.environ['CLASSPATH'] += 'the/path/to/the/jar'
Otherwise, consider bulking up your question with more details, especially if you can get a more meaningful error output.
I had the same error trying to run a .exe built with PyInstaller through wine.
My problem went away by adding C:\Program Files\Java\ [your jdk version here] \jre\bin\server to the PATH environment variable in wine - I suppose it might be the same in Windows.
It also reappeared if I tried to build with C:\Program Files\Java\ [your jdk version here] \jre\bin\server in my PATH, so I had to build without it and then append it before running it (I have no explanation as to why this happens).
I’ve produced a C++ program in Eclipse running on Redhat, which compiles and runs fine through Eclipse.
I thought that to run it separately to Eclipse you use the build artifact which is in the directory set via the project’s properties.
However this executable doesn’t run (I know it’s an executable as I’ve set it to be an executable via the project’s properties and it shows up as such via the ls command and the file explorer).
When attempting to run it using the executable’s name, I get the error:
bash: <filename>: command not found
When attempting to run it as a bash file:
<filename>: <filename>: cannot execute binary file
And when running it with "./" before the file name, nothing happens. Nothing new appears in the running processes and the terminal just goes to the next line as though I’d just pressed enter with no command.
Any help?
You've more or less figure out the first error yourself. when you just run <filename> , it is not in your PATH environment variable, so you get "command not found". You have to give a full or relative path when to the program in order to run it, even if you're in the same directory as the program - you run it with ./<filename>
When you do run your program, it appears to just exit as soon as you start it - we can't help much with that without knowing what the program does or see some code.
You can do some debugging, e.g. after the program just exits run echo $? to see if it exited with a particular exit value, or run your program using the strace tool to see what it does (or do it the usual way, insert printf debugging, or debug it with gdb)